ABSTRACT
Low-energy nuclear reactions are known to be extremely dependent on the local crystal structure and crystal defects of the deuterated samples. This has a strong influence on both hydrogen diffusion and the effective electron mass. The latter determines the strength of the local electron-screening effect and can change the deuteron-deuteron reaction rates at very low energies by many orders of magnitude. In the present study, zirconium samples were exposed to various conditions and energies of deuteron beams using the unique accelerator system with ultra-high vacuum, installed in the eLBRUS laboratory at the University of Szczecin. Irradiated and virgin samples were investigated by means of the X-ray diffraction (XRD) and positron annihilation spectroscopy (PAS). While the first method delivers information about changes of crystal lattice parameters and possible production of hydrides accompanying the formation of dislocations that are produced during irradiation of the samples, the second one can determine the depth distribution of crystal defects, being especially sensitive to vacancies. The studied Zr samples were also implanted by carbon and oxygen ions in order to simulate the real situation taking place in nuclear reaction experiments and to investigate their influence on the kinetic of produced vacancies. The observed enhancement of the electron-screening effect in the deuteron fusion reaction at very low energies could be explained by formation of a high number of vacancies during the deuteron irradiation of samples. Possible carbon and oxygen impurities can affect this process in various ways by changing the depth distribution of vacancies and their diffusion, but they play only a minor role in the strength of the electron-screening effect.
ABSTRACT
New conductive materials for tissue engineering are needed for the development of regenerative strategies for nervous, muscular, and heart tissues. Polycaprolactone (PCL) is used to obtain biocompatible and biodegradable nanofiber scaffolds by electrospinning. MXenes, a large class of biocompatible 2D nanomaterials, can make polymer scaffolds conductive and hydrophilic. However, an understanding of how their physical properties affect potential biomedical applications is still lacking. We immobilized Ti3C2Tx MXene in several layers on the electrospun PCL membranes and used positron annihilation analysis combined with other techniques to elucidate the defect structure and porosity of nanofiber scaffolds. The polymer base was characterized by the presence of nanopores. The MXene surface layers had abundant vacancies at temperatures of 305-355 K, and a voltage resonance at 8 × 104 Hz with the relaxation time of 6.5 × 106 s was found in the 20-355 K temperature interval. The appearance of a long-lived component of the positron lifetime was observed, which was dependent on the annealing temperature. The study of conductivity of the composite scaffolds in a wide temperature range, including its inductive and capacity components, showed the possibility of the use of MXene-coated PCL membranes as conductive biomaterials. The electronic structure of MXene and the defects formed in its layers were correlated with the biological properties of the scaffolds in vitro and in bacterial adhesion tests. Double and triple MXene coatings formed an appropriate environment for cell attachment and proliferation with mild antibacterial effects. A combination of structural, chemical, electrical, and biological properties of the PCL-MXene composite demonstrated its advantage over the existing conductive scaffolds for tissue engineering.
ABSTRACT
During high-speed cutting, a white layer is often produced on the machined surfaces after mechanical machining, seriously affecting the mechanical properties. These properties are related to the material structure and the defects induced by cutting. However, there is a lack of research on the atomic-scale defects of the white layer. This paper studied the influence of cutting parameters, namely the feed rate, cutting speed and cutting depth, on atomic-scale defects induced by high-speed cutting in GCr15 steel. Positron annihilation studies showed typical plastically deformed or tempered carbon steel defects with additional vacancy cluster components. The quantity of these clusters changed with cutting parameters. Furthermore, significant changes were observed in the subsurface region up to 1 µm, occurring as a result of simultaneous phase transformations, deformation and thermal impacts. The predominant accumulation of only one type of atomic-scale defect was not observed.
ABSTRACT
Positron annihilation spectroscopy and complementary methods were used to detect changes induced by sandblasting of alumina particles at different pressures varying from 1 to 6 bar in pure well-annealed copper. The positron lifetime measurements revealed existence of dislocations and vacancy clusters in the adjoined surface layer. The presence of retained alumina particles in the copper at the depth below 50 µm was found in the SEM pictures and also in the annihilation line shape parameter profiles measured in the etching experiment. The profiles show us that the total depth of damaged zones induced by sandblasting of alumina particles ranges from 140 µm up to ca. 800 µm and it depends on the applied pressure. The work-hardening of the adjoined surface layer was found in the microhardness measurements at the cross-section of the sandblasted samples.
