Effect of Soybean Oil on the Improvement of the Functionality of Edible Membrane-Type Food Packaging Films Based on Caseinate-Carboxymethyl Chitosan Compositions.

Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate-carboxymethyl chitosan (CA-CMCH) composite films were made with the incorporation of soybean oil (SO) using a casting technique. The influence of different soybean oil concentrations at 0, 0.5, and 1% (w/w) on physical, mechanical, barrier, and surface characteristics of films composed of caseinate-carboxymethyl chitosan (CA-CMCH) was evaluated. The brightest film (L* value of 95.95 ± 0.30) was obtained with the edible film made from the control group of samples with sodium caseinate (NaCA-100; 100% NaCA). The results also indicated that samples with 1% SO in NaCA-75 and CaCA-75 had lower water vapor permeability (WVP), while those with NaCA-50 and CaCA-50 showed higher values of WVP. For mechanical properties, this study found that incorporating soybean oil into the caseinate-carboxymethyl (CA-CMCH) composite films led to an enhancement of both tensile strength and elongation at break. The morphological structures, determined using SEM, of control and composite films showed compact and homogenous surfaces. Overall, the addition of soybean oil contributed to the improvement of the functional properties of the edible films, offering potential solutions to the environmental issues associated with plastic packaging and enhancing the safety and performance of food packaging.

Regulation of the Ice â to Ice III high pressure phase transition meta-stability in milk and its bactericidal effects.

This study was focused on a novel approach of creating perturbations under high pressure (HP) meta-stable Ice Ⅰ to Ice Ⅲ phase transition and its bactericidal effects. Experiments were carried out under subzero high pressure processing conditions using Escherichia coli suspended in milk, and the microbial inactivation before and after the meta-stable state regulation was compared. The phase transition position of unperturbed milk was 302 MPa/-37.5 °C. The volume change resulting from the phase transition was employed as the perturbation mechanism. Glucose (5 %, 20 %) and sodium chloride solutions (5 %, 20 %) were used as regulatory sources. Glucose solutions accelerated the phase change of the milk better than the sodium chloride solution and resulted in an optimum phase transition position of milk at 243 MPa/-30.6 °C. The induced perturbations accelerated meta-stable transformation and enhanced the microbial destruction. At 330 MPa/3s, compared to the unfrozen samples, the lethality of E. coli in the frozen-regulated samples significantly increased by 1.79 log. The relationship between the E. coli inactivation within the phase change pressure range and the pressure was not continuous, but a segmented one, both before and after meta-stable state regulation. A higher level of E. coli destruction was accomplished by a 5 min pressure-holding of frozen samples at 220 MPa and 280 MPa as compared to the one-pulse and two-pulses treatments without holding time. The maximum lethality of 6.73 log was achieved at 280 MPa/5 min in the frozen-regulated application.

Effects of high-pressure processing on the physicochemical and adsorption properties, structural characteristics, and dietary fiber content of kelp (Laminaria japonica).

To investigate the effects of high-pressure processing (HPP) on the physicochemical and adsorption properties and structural characteristics of kelp, kelp slice (KS) and kelp powder (KP) were treated under different pressures (300, 450, and 600 MPa) for 5 and 10 min. Compared to untreated KP, HPP-treated KP yielded a 1.31-fold increase in water holding capacity (600 MPa/5 min), a 0.12-fold increase in swelling capacity (450 MPa/10 min), a 1.33-fold increase in oil holding capacity (600 MPa/10 min), a 10-fold increase in glucose adsorption capacity (450 MPa/10 min), and a 0.22-fold increase in cholesterol adsorption capacity (163.1 mg/g DW at 450 MPa/10 min), and exhibited good Cd (Ⅱ) adsorption capacity when its concentration was 10 mmol/L in the small intestine. The physicochemical properties of HPP-treated KS were not improved due to its low specific surface area. In addition, HPP treatment efficiently reduced the particle size of KP and increased its total and soluble dietary fiber content by 17% and 63% at 600 MPa/10 min, respectively. Scanning electron microscope micrographs demonstrated that the surface of HPP-treated KP was rough and porous, and the specific surface area increased with increasing pressure and processing time. To conclude, the results obtained in the present study suggest that HPP is a promising processing method for improving the functionality and structural characteristics of KP and provide a theoretical basis for the utilization of HPP-treated KP as a fiber-rich ingredient in the functional food industry.

Topological Diversity in Electrochemically Active Core-Modified Expanded Porphyrinoids.

Thiophene-based expanded porphyrinoids undergo a transition from a planar conformation to a twisted conformation upon a systematic increase in the number of thiophene units. Octaphyrin, with 40π electrons, displayed temperature-dependent interconversion between planar and nonplanar conformations in the solution state, in contrast to the rigid planar conformation in the solid state. 60π-dodecaphyrin and 70π-tetradecaphyrin have the maximum number of π-electrons for 12- and 14-heterocycle porphyrinoids, respectively. Spectro-electrochemical measurements confirmed facile reversible two-electron oxidation and the unstable radical cation intermediate in these systems.

Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review.

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Tetra S-confused porphyrinoids.

Maximum confusion in porphyrinoids can be achieved by inter-linking heterocycles only through 2,4-connectivity. 20π confused porphycene and 30π expanded porphycene represent examples with the highest number of confused heterocyclic units in a given macrocycle. They significantly differ from the parent 20π porphycene and 30π hexaphyrin in their structural, electronic and redox properties due to the cross conjugation arising from the 2,4-connectivity of the heterocycle. They have been characterized by single crystal X-ray diffraction studies and their aromatic features have been substantiated by quantum chemical calculations.

Antibacterial activity and improvement of the oxidative stability of soybean oil by 4-hydroxybenzyl isothiocyanate from white mustard seeds.

4-Hydroxybenzyl isothiocyanate (4-HBITC) is one of the most important secondary metabolite products in white mustard seeds. The antibacterial activity and inhibition of lipid oxidation of 4-HBITC were investigated. The results indicated that 4-HBITC had a significant antibacterial effect on Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium, and its effect on gram-positive bacteria was superior to that on gram-negative bacteria. The combination of 4-HBITC with citric acid or ascorbic acid had a better antibacterial effect than adding them alone. The antibacterial mechanism of 4-HBITC to affect the metabolic activity rather than the integrity or the permeability of cell membranes was identified. In addition, white mustard seed extract which contains 4-HBITC was found to extend the oxidative stability of soybean oil, and this effect was also improved after the combination of 4-HBITC with citric acid. These results indicated that 4-HBITC and white mustard seed extract have potential for application as a natural preservatives in food and for improving the oxidative stability of edible oils.

Facilitation of metastable ice â - ice III phase transition of liquid foods at high-pressure sub-zero temperature by perturbation.

In this study, the distribution of ice Ⅰ - ice III phase transition positions and its influencing factors on various fruit juices and food model solutions under high pressure (HP) were investigated. In addition, the effect of perturbation on induction of phase change in metastable apple juice was also explored. The phase transition positions of fruit juice samples deviated far from the theoretical value (210 MPa/ -21 °C), with pressure in range of 268 âˆ¼ 305 MPa and temperature between -31.09 °C and -37.21 °C, with the most extreme phase transition position of 305 MPa/ -37.21 °C for apple juice. The phase change position was affected by the type of solution but not by the concentration of solutions. The cooling media namely, sodium chloride (5%, 20%) and glucose solution (5%, 20%) were used as perturbation sources to stimulate the metastable apple juice by using instantaneous volume reduction during the ice Ⅰ - ice III phase transition. They successfully promoted the phase transition of apple juice, where 20% sodium chloride solution significantly (p < 0.05) reduced the phase change pressure of apple juice to 239 MPa. The perturbation effect was influenced by the type and concentration of the perturbation source, the composition of the cavity area and the softness of the sample container.

An Automated Image Processing Module for Quality Evaluation of Milled Rice.

The paper demonstrates a low-cost rice quality assessment system based on image processing and machine learning (ML) algorithms. A Raspberry-Pi based image acquisition module was developed to extract the structural and geometric features from 3081 images of eight different varieties of rice grains. Based on features such as perimeter, area, solidity, roundness, compactness, and shape factor, an automatic identification system is developed to segment the grains based on their types and classify them by using seven machine learning algorithms. These ML models are trained using the images and are compared using different ML models. ROC curves are plotted for each model for quantitative analysis to assess the model's performance. It is concluded that the random forest classifier presents an accuracy of 77 percent and is the best-performing model for the classification of rice varieties. Furthermore, the same algorithm is efficiently employed to determine the price of adulterated rice samples based upon the market price of individual rice.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review.

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

Formation of hydroxyphenyl-pyranoanthocyanins derived from cyanidin-3-O-glucoside and effects of high-pressure processing on the transformation efficiency.

Hydroxyphenyl-pyranoanthocyanins (PACNs), derived from anthocyanins (ACNs) reacted with hydroxycinnamic acids, have higher practical application value because of better physicochemical stability than their precursors. However, the slow formation rate restricted their broader applications. In the present study, cyanidin-3-O-glucoside (C3G) was chosen to react with four kinds of hydroxycinnamic acids in a model solution. Changes of color and the production of hydroxyphenyl-PACNs were monitored. The formation of derivatives was time-dependent, and the orange-yellow changing trend was correlated with the formation of PACNs and the consumption of C3G. In addition, high-pressure processing (HPP) as a widely-used non-thermal processing method in the food industry was conducted to investigate its impact on hydroxyphenyl-PACNs formation. The results showed that HPP significantly improves the yield of two types of hydroxyphenyl-PACNs (C3G-4-vinylcatechol and C3G-4-vinylphenol) and the retention of total residual pigments during 56 days of storage. Therefore, HPP contributed to color-protecting and the transformation of hydroxyphenyl-PACNs.

Optimization of Wall Material of Freeze-Dried High-Bioactive Microcapsules with Yellow Onion Rejects Using Simplex Centroid Mixture Design Approach Based on Whey Protein Isolate, Pectin, and Sodium Caseinate as Incorporated Variables.

For the food sector, onion rejects are an appealing source of value-added byproducts. Bioactive compounds were recovered from yellow onion rejects using a pulse electric field process at 6000 v and 60 pulses. The onion extract was encapsulated with whey protein isolate (WPI), pectin (P), and sodium caseinate (SC) with a mass ratio of 1:5 (extract/wall material, w/w). A Simplex lattice with augmented axial points in the mixture design was applied for the optimization of wall material for the encapsulation of onion reject extract by freeze-drying (FD). The optimal wall materials were 47.6 g/100 g (SC), 10.0 g/100 g (P), and 42.4 g/100 g (WPI), with encapsulation yield (EY) of 85.1%, total phenolic content (TPC) of 48.7 mg gallic acid equivalent/g DW, total flavonoid content (TFC) of 92.0 mg quercetin equivalent/g DW, and DPPH capacity of 76.1%, respectively. The morphological properties of the optimal encapsulate demonstrated spherical particles with a rough surface. At optimal conditions, the minimum inhibitory concentration (MIC) of the extract (mean diameter of inhibition zone: 18.8 mm) was shown as antifungal activity against Aspergillus niger.

Recent Progress in the Synergistic Bactericidal Effect of High Pressure and Temperature Processing in Fruits and Vegetables and Related Kinetics.

BACKGROUND: Traditional thermal processing is a widely used method to ensure food safety. However, thermal processing leads to a significant decline in food quality, especially in the case of fruits and vegetables. To overcome this drawback, researchers are extensively exploring alternative non-thermal High-Pressure Processing (HPP) technology to ensure microbial safety and retaining the sensory and nutritional quality of food. However, HPP is unable to inactivate the spores of some pathogenic bacteria; thus, HPP in conjunction with moderate- and low-temperature is employed for inactivating the spores of harmful microorganisms. Scope and approach: In this paper, the inactivation effect of high-pressure and high-pressure thermal processing (HPTP) on harmful microorganisms in different food systems, along with the bactericidal kinetics model followed by HPP in certain food samples, have been reviewed. In addition, the effects of different factors such as microorganism species and growth stage, process parameters and pressurization mode, and food composition on microbial inactivation under the combined high-pressure and moderate/low-temperature treatment were discussed. KEY FINDINGS AND CONCLUSIONS: The establishment of a reliable bactericidal kinetic model and accurate prediction of microbial inactivation will be helpful for industrial design, development, and optimization of safe HPP and HPTP treatment conditions.

Topoisomers and aromaticity of a redox active 50π core-modified isophlorinoid.

A 50π decathiophene expanded isophlorin adopts a unique [6+4] conformation and a near-planar conformation depending on the solvent of crystallization and undergoes a reversible two electron oxidation to yield the largest planar antiaromatic dication bearing 48π-electrons. Cyclic voltammetry studies revealed the redox active nature of this macrocycle with multiple oxidation and reduction potentials. Spectro-electrochemical measurements confirmed a facile reversible two-electron oxidation and the unstable radical cation intermediate in these systems. Quantum chemical calculations that were employed to estimate NICS(0) values revealed a weak diatropic ring current for the 50π macrocycle and an intense paratropic ring current for the 48π dicationic species.

Cloning, Expression and Characterization of Spore Wall Protein 5 (SWP5) of Indian Isolate NIK-1S of Nosema bombycis.

SWPs are the major virulence component of microsporidian spores. In microsporidia, SWPs can be found either in exospore or endospore to serve as a putative virulence factor for host cell invasion. SWP5 is a vital protein that involves in exospore localization and supports the structural integrity of the spore wall and this action potentially modulates the course of infection in N. bombycis. Here we report recombinant SWP5 purification using Ni-NTA IMAC and SEC. GFC analysis reveals SWP5 to be a monomer which correlates with the predicted theoretical weight and overlaps with ovalbumin peak in the chromatogram. The raised polyclonal anti-SWP5 antibodies was confirmed using blotting and enterokinase cleavage experiments. The resultant fusion SWP5 and SWP5 in infected silkworm samples positively reacts to anti-SWP5 antibodies is shown in ELISA. Immunoassays and Bioinformatic analysis reveal SWP5 is found to be localized on exospore and this action could indicate the probable role of SWP5 in host pathogen interactions during spore germination and its contribution to microsporidian pathogenesis. This study will support development of a field-based diagnostic kit for the detection N. bombycis NIK-1S infecting silkworms. The analysis will also be useful for the formulation of drugs against microsporidia and pebrine disease.

The Effect of Pressure-Shift Freezing versus Air Freezing and Liquid Immersion on the Quality of Frozen Fish during Storage.

In this study, a self-cooling laboratory system was used for pressure−shift freezing (PSF), and the effects of pressure−shift freezing (PSF) at 150 MPa on the quality of largemouth bass (Micropterus salmoides) during frozen storage at −30 °C were evaluated and compared with those of conventional air freezing (CAF) and liquid immersion freezing (LIF). The evaluated thawing loss and cooking loss of PSF were significantly lower than those of CAF and LIF during the whole frozen storage period. The thawing loss, L* value, b* value and TBARS of the frozen fish increased during the storage. After 28 days storage, the TBARS values of LIF and CAF were 0.54 and 0.65, respectively, significantly higher (p < 0.05) than the 0.25 observed for PSF. The pH of the samples showed a decreasing trend at first but then increased during the storage, and the CAF had the fastest increasing trend. Based on Raman spectra, the secondary structure of the protein in the PSF-treated samples was considered more stable. The α-helix content of the protein in the unfrozen sample was 59.3 ± 7.22, which decreased after 28 days of frozen storage for PSF, LIF and CAF to 48.5 ± 3.43, 39.1 ± 2.35 and 33.4 ± 4.21, respectively. The results showed that the quality of largemouth bass treated with PSF was better than LIT and CAF during the frozen storage.

Demonstration of Escherichia coli Inactivation in Sterile Physiological Saline under High Pressure (HP) Phase Transition Conditions and Analysis of Probable Contribution of HP Metastable Positions Using Model Solutions and Apple Juice.

It was demonstrated that the inactivation of high pressure (HP) treatment on Escherichia coli survival in sterile physiological saline (SPS) was influenced by the treatment conditions: unfrozen, frozen-thawed and fully frozen (phase transition). In order to probe the enhanced phase transition microbial destruction, vibration effects of phase transition position were created and discussed. Test samples were placed in HP chamber for treatment (150/240/330 MPa, no holding time) at room temperature and a special cooling device was used to maintain the phase transition conditions. Results showed that the phase transition from ice I to ice III of frozen SPS could be realized based on the cooling of a 20% sodium chloride solution. HP treatment under fully frozen conditions produced the best lethal effect compared to unfrozen and freeze-thaw samples. Vibration tests were carried out by using model solutions and apple juice to explore the behavior of phase transition. A synchronous and advance phase transition of internal apple juice was realized, respectively, by using pure water and 5% sodium chloride solution as external vibration sources, and the advance phase transitions of external pure water were realized by using 5% sodium chloride solution and 5% glucose solution as internal vibration sources.

Profilin is involved in G1 to S phase progression and mitotic spindle orientation during Leishmania donovani cell division cycle.

Profilin is a multi-ligand binding protein, which is a key regulator of actin dynamics and involved in regulating several cellular functions. It is present in all eukaryotes, including trypanosomatids such as Leishmania. However, not much is known about its functions in these organisms. Our earlier studies have shown that Leishmania parasites express a single homologue of profilin (LdPfn) that binds actin, phosphoinositides and poly- L- proline motives, and depletion of its intracellular pool to 50%of normal levels affects the cell growth and intracellular trafficking. Here, we show, employing affinity pull-down and mass spectroscopy, that LdPfn interacted with a large number of proteins, including those involved in mRNA processing and protein translation initiation, such as eIF4A1. Further, we reveal, using mRNA Seq analysis, that depletion of LdPfn in Leishmania cells (LdPfn+/-) resulted in significantly reduced expression of genes which encode proteins involved in cell cycle regulation, mRNA translation initiation, nucleosides and amino acids transport. In addition, we show that in LdPfn+/- cells, cellular levels of eIF4A1 protein were significantly decreased, and during their cell division cycle, G1-to-S phase progression was delayed and orientation of mitotic spindle altered. These changes were, however, reversed to normal by episomal expression of GFP-LdPfn in LdPfn+/- cells. Taken together, our results indicate that profilin is involved in regulation of G1-to-S phase progression and mitotic spindle orientation in Leishmania cell cycle, perhaps through its interaction with elF4A1 protein.

Discovery of MAP855, an Efficacious and Selective MEK1/2 Inhibitor with an ATP-Competitive Mode of Action.

Mutations in MEK1/2 have been described as a resistance mechanism to BRAF/MEK inhibitor treatment. We report the discovery of a novel ATP-competitive MEK1/2 inhibitor with efficacy in wildtype (WT) and mutant MEK12 models. Starting from a HTS hit, we obtained selective, cellularly active compounds that showed equipotent inhibition of WT MEK1/2 and a panel of MEK1/2 mutant cell lines. Using a structure-based approach, the optimization addressed the liabilities by systematic analysis of molecular matched pairs (MMPs) and ligand conformation. Addition of only three heavy atoms to early tool compound 6 removed Cyp3A4 liabilities and increased the cellular potency by 100-fold, while reducing log P by 5 units. Profiling of MAP855, compound 30, in pharmacokinetic-pharmacodynamic and efficacy studies in BRAF-mutant models showed comparable efficacy to clinical MEK1/2 inhibitors. Compound 30 is a novel highly potent and selective MEK1/2 kinase inhibitor with equipotent inhibition of WT and mutant MEK1/2, whose drug-like properties allow further investigation in the mutant MEK setting upon BRAF/MEK therapy.

Facilitating high pressure phase-transition research and kinetics studies at subzero temperatures using self-cooling laboratory units.

Self-cooling phase-transition units were built and tested to successfully carryout pressure shift freezing, high pressure thawing and subzero temperature microbial destruction kinetics. The design of these equipment has been progressively improved over the years as highlighted in this paper. Phase transition data on grape & apple juices, and sodium chloride (20%) & glucose solutions (20%) in Ice I were gathered and modeled using Simon-like and polynomial equations. Factors influencing the Ice I and water to Ice III phase transition position were evaluated, and found to be mainly affected by the solute in the aqueous solution. For pressure shifting freezing and pressure assisting freezing to Ice III, water and 20% sodium chloride solution were successfully employed and verified as cooling media for creating the temperature change pathway of potato and carrot. Using sodium chloride solution (20%) as the cooling medium, the phase transition pathway of apple juice and grape juice under high pressure for the phase transition of Ice I and metastable water to Ice III was established. This could be used in kinetic studies. The developed cooling unit concepts can use in any commercial high pressure equipment for subzero temperature treatment of foods without externally supplied cooling.