Break oily water emulsion during petroleum enhancing production processes using green approach for the synthesis of SnCuO@FeO nanocomposite from microorganisms.

The aim of this work was to synthesize a green nanoparticle SnCuO@FeO nanocomposite core-shell to break oily water emulsions during petroleum-enhancing production processes as an alternative to chemical and physical processes. In this study, eight bacterial isolates (MHB1-MHB8) have been isolated from tree leaves, giant reeds, and soil samples. The investigation involved testing bacterial isolates for their ability to make FeO nanoparticles and choosing the best producers. The selected isolate (MHB5) was identified by amplification and sequencing of the 16S rRNA gene as Bacillus paramycoides strain OQ878685. MHB5 produced the FeO nanoparticles with the smallest particle size (78.7 nm) using DLS. XRD, FTIR, and TEM were used to characterize the biosynthesized nanoparticles. The jar experiment used SnCuO@FeO with different ratios of Sn to CuO (1:1, 2:1, and 3:1) to study the effect of oil concentration, retention time, and temperature. The most effective performance was observed with a 1:1 ratio of Sn to CuO, achieving an 85% separation efficiency at a concentration of 5 mg/L, for a duration of 5 min, and at a temperature of 373 K. Analysis using kinetic models indicates that the adsorption process can be accurately described by both the pseudo-first-order and pseudo-second-order models. This suggests that the adsorption mechanism likely involves a combination of film diffusion and intraparticle diffusion. Regarding the adsorption isotherm, the Langmuir model provides a strong fit for the data, while the D-R model indicates that physical interactions primarily govern the adsorption mechanism. Thermodynamic analysis reveals a ∆H value of 18.62 kJ/mol, indicating an exothermic adsorption process. This suggests that the adsorption is a favorable process, as energy is released during the process. Finally, the synthesized green SnCuO@FeO nanocomposite has potential for use in advanced applications in the oil and gas industry to help the industry meet regulatory compliance, lower operation costs, reduce environmental impact, and enhance production efficiency.

Correction: Synthesis of novel solid scale inhibitors based on silver tungstate loaded KIT-6 for scale removal from produced water: static and modeling evaluation.

Correction for 'Synthesis of novel solid scale inhibitors based on silver tungstate loaded KIT-6 for scale removal from produced water: static and modeling evaluation' by Heba M. Salem, et al., Dalton Trans., 2023, https://doi.org/10.1039/d3dt02594b.

Synthesis of novel solid scale inhibitors based on silver tungstate loaded KIT-6 for scale removal from produced water: static and modeling evaluation.

Oilfield scaling is a major problem in the oil and gas industry. Scaling issues cost the industry millions of dollars in damage and lost production every year as scaling is one of the main causes of global production decline. In this study, solid scale inhibitors based on silver tungstate loaded KIT-6 were synthesized and evaluated using a static scale inhibition test. The synthesized materials were characterized using wide and low XRD, N2 adsorption-desorption, TGA, and FTIR, SEM, and XPS analyses. Small-angle XRD patterns showed that KIT-6 had 3D-mesopore diffraction peaks with a cubic Ia3d space group. Wide-angle XRD patterns of silver tungstate loaded KIT-6 confirmed the crystallinity. The prepared catalysts are characterized by higher surface areas (394-918 m2 g-1), large pore volumes (0.63-0.98 cm3 g-1), narrow pore size distributions (5.3 nm), and high thermal stability up to 1000 °C. The results of this study demonstrate that the inhibition efficiency of the scale inhibitor increases and that of the calcite scale inhibitor decreases with increasing pH (2 to 8). This proposes that the scale inhibitor is more effective under alkaline conditions. An inhibition efficiency of 99% on calcium carbonate can be achieved at an optimal dosage of 7.5 ppm at 55 °C, indicating that the scale inhibitor exhibits a relatively good inhibition performance on calcium carbonate. The use of these materials can potentially lead to more efficient and cost-effective solutions for scale inhibition in various industrial processes.

Evaluation of the efficiency of using Salmonella Kentucky and Escherichia coli O119 bacteriophages in the treatment and prevention of salmonellosis and colibacillosis in broiler chickens.

Phage therapy is considered an alternative modality in the treatment of different bacterial diseases. However, their therapeutic and preventive roles against infections caused by Salmonella Kentucky and Escherichia coli O119 were of little attention. In this study, two phages were isolated, characterized and assessed for their potential therapeutic and preventive roles against S. Kentucky and E. coli O119 infections in broilers. Commercial 1-day-old arboacres broiler chicks were assigned to seven groups: Group Ӏ was as a negative control, groups (П and Ш) were assigned as positive controls by the challenge of S. Kentucky and E. coli O119, respectively. The remaining four groups (IV, V, VI and VII) were administrated with five repeated phage doses to determine the effect of multiple doses. Phages were administrated in groups (IV and VI) after challenging with S. Kentucky and E. coli O119, respectively to assess their therapeutic role; moreover, their preventive role was evaluated through administration in groups (V and VII) before challenging with S. Kentucky and E. coli O119, respectively. Sampling was done from different organs at three time points and revealed that phage-treated groups had lower colony forming units of S. Kentucky and E. coli. Our results suggest that bacteriophages are efficient in the treatment and prevention of salmonellosis and colibacillosis in broiler farms.

Breakthrough curves of oil adsorption on novel amorphous carbon thin film.

A novel amorphous carbon thin film (ACTF) was prepared by hydrolyzing wood sawdust and delignificating the residue to obtain cellulose mass that was subjected to react with cobalt silicate nanoparticle as a catalyst under the influence of sudden concentrated sulfuric acid addition at 23 °C. The novel ACTF was obtained in the form of thin films like graphene sheets having winding surface. The prepared ACTF was characterized by Fourier-transform infrared spectrometer, transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET). The adsorption capacity of ACTF to remove oil from synthetic produced water was evaluated using the incorporation of Thomas and Yoon-Nelson models. The performance study is described through the breakthrough curves concept under relevant operating conditions such as column bed heights (3.8, 5 and 11 mm) and flow rate (0.5, 1 and 1.5 mL.min(-1)). It was found that the oil uptake mechanism is favoring higher bed height. Also, the highest bed capacity of 700 mg oil/g ACTF was achieved at 5 mm bed height, and 0.5 mL.min(-1) flow rate. The results of breakthrough curve for oil adsorption was best described using the Yoon-Nelson model. Finally, the results illustrate that ACTF could be utilized effectively for oil removal from synthetic produced water in a fixed-bed column system.

Relationship between level of circulating modified LDL and the extent of coronary artery disease in type 2 diabetic patients.

The impact of diabetes on health is due almost entirely to a series of complications that characterise the disease. It is associated with an increased incidence of macrovascular complications including coronary artery disease (CAD). The aim of the present study is to evaluate the possible relationship between the circulating levels of the modified derivatives of low-density lipoprotein (LDL) and the development of angiopathy in type 2 diabetic patients with CAD. The status of the antioxidant defences and the role of supplementation with antioxidant combinations are also studied in these patients. The study was conducted on three groups: group I (controls); group II (type 2 diabetic patients without complications--CAD[-]); and group III (including type 2 diabetic patients with stable CAD - CAD[+]). Patients in group III received adjunct treatment of antioxidant tablets for three months. The results of the present study clearly indicated that there was excessive exposure to oxidative stress in diabetic patients. The increase in free radicals was coupled with disturbance in free radical scavengers, particularly the glutathione system. The disturbance was more prominent in CAD(+) patients. The study has shown alteration in the lipid profile in diabetic groups, where the oxidised LDL (ox-LDL) levels were significantly higher than in control subjects. Diabetics with CAD had higher levels of ox-LDL than did patients without CAD. The intima/media thickness (IMT) of the carotid artery was within clinically accepted normal values if the ox-LDL level was below 100-110 u/L. Once the ox-LDL exceeded this range, IMT increased sharply with the increase in plasma ox-LDL. It seems that the level of ox-LDL should be kept below an upper limit of the 100-110 u/L range in order to avoid the serious atherosclerotic effects of this factor. The results demonstrate that plasma levels of ox-LDL correlate with the extent of coronary artery disease in type 2 diabetic patients and suggest that elevated levels of ox-LDL, can serve as an independent and significant predictor for future cardiac events in type 2 diabetic patients with CAD.