Quantitative 31P-NMR for the Purity Determination of the Organophosphorus Compound Brigatinib and Its Method Validation.

The spectrum of 31P-NMR is fundamentally simpler than that of 1H-NMR; consequently identifying the target signal(s) for quantitation is simpler using quantitative 31P-NMR (31P-qNMR) than using quantitative 1H-NMR (1H-qNMR), which has been already established as an absolute determination method. We have previously reported a 31P-qNMR method for the absolute determination of cyclophosphamide hydrate and sofosbuvir as water-soluble and water-insoluble organophosphorus compounds, respectively. This study introduces the purity determination of brigatinib (BR), an organophosphorus compound with limited water solubility, using 31P-qNMR at multiple laboratories. Phosphonoacetic acid (PAA) and 1,4-BTMSB-d4 were selected as the reference standards (RSs) for 31P-qNMR and 1H-qNMR, respectively. The qNMR solvents were chosen based on the solubilities of BR and the RSs for qNMR. CD3OH was selected as the solvent for 31P-qNMR measurements to prevent the influence of deuterium exchange caused by the presence of exchangeable intramolecular protons of BR and PAA on the quantitative values, while CD3OD was the solvent of choice for the 1H-qNMR measurements to prevent the influence of water signals and the exchangeable intramolecular protons of BR and PAA. The mean purity of BR determined by 31P-qNMR was 97.94 ± 0.69%, which was in agreement with that determined by 1H-qNMR (97.26 ± 0.71%), thus indicating the feasibility of purity determination of BR by 31P-qNMR. Therefore, the findings of this study may provide an effective method that is simpler than conventional 1H-qNMR for the determination of organophosphorus compounds.

[Quantitative Determination Method of Aconitum Monoester Alkaloids Using Relative Molar Sensitivity (RMS) for the Assay in the Japanese Pharmacopoeia].

Recently, a novel quantitative method using relative molar sensitivity (RMS) was applied to quantify the ingredients of drugs and foods. An important development in this regard can be observed in the Japanese Pharmacopoeia (JP) 18, where the quantification of perillaldehyde, an unstable compound, in crude drug "Perilla Herb," was revised to incorporate the RMS method. In this study, the primary objective was to improve the tester safety and reduce the amount of reagents used in the JP test. To achieve this, the quantification of three toxic Aconitum monoester alkaloids (AMAs) was explored using the RMS method, employing a single reference compound for all three targets. These AMAs, namely benzoylmesaconine hydrochloride, benzoylhypaconine hydrochloride, and 14-anisoylaconine hydrochloride, which are the quantitative compounds of Kampo extracts containing Aconite Root (AR), were quantified using the reference compound benzoic acid (BA). Reliable RMS values were obtained using both 1H-quantitative NMR and HPLC/UV. Using the RMS of three AMAs relative to the BA, the AMA content (%) in commercial AMAs quantitative reagents were determined without analytical standards. Moreover, the quantitative values of AMAs using the RMS method and the calibration curve method using the three analytical standards were similar. Additionally, similar values were achieved for the three AMAs in the Kampo extracts containing AR using the RMS and the modified JP18 calibration curve methods. These results suggest that the RMS method is suitable for quantitative assays of the Kampo extracts containing AR and can serve as an alternative to the current method specified in the JP18.

[Changes in Test Methods for Internationalization in the Japanese Pharmacopoeia (Part 3): Establishment of a Quantitative Method for Sodium Cromoglicate and Trihexyphenidyl Hydrochloride Using HPLC Analysis].

The Japanese Pharmacopoeia (JP) is an official normative publication for establishing the authenticity and properties and maintaining the quality of pharmaceutical products in Japan. The JP is revised every five years and partially revised in order to respond to the progress of science and technology, the demand for medical care, and international harmonization. Thus, "Internationalization of the JP" is one of the most important issues to address for the revision of the JP, which is also referred to the basic principles for the preparation of the JP 19th edition. For instance, the incorporation of the test methods that have been used in other pharmacopeias, such as the European Pharmacopoeia (EP) and the United States Pharmacopeia (USP), into the JP is one of promising approaches. From this perspective, we have recently reported changes in test methods, establishment of a quantitative test method for the JP-listed clonidine hydrochloride as well as lorazepam from using a potentiometric titration method to using HPLC method. As our ongoing study to change test methods for internationalization, we selected sodium cromoglicate and trihexyphenidyl hydrochloride. Each pharmaceutical product is analyzed using a potentiometric titration method as listed in the 18th JP; however, both the EP and the USP use HPLC method for quantitative analysis of these drugs. In this study, we synthesized the related impurities of sodium cromoglicate and trihexyphenidyl hydrochloride listed in the EP and determined their purities using quantitative NMR. The separation conditions of these compounds were examined using HPLC and simultaneous analyses were performed.

Quantitative 31P-NMR for Purity Determination of Sofosbuvir and Method Validation.

Quantitative 1H-NMR (1H-qNMR) is useful for determining the absolute purity of organic molecules; however, it is sometimes difficult to identify the target signal(s) for quantitation because of their overlap and complexity. Therefore, we focused on the 31P nucleus because of the simplicity of its signals and previously reported 31P-qNMR in D2O. Here we report 31P-qNMR of an organophosphorus compound, sofosbuvir (SOF), which is soluble in organic solvents. Phosphonoacetic acid (PAA) and 1,4-bis(trimethylsilyl)benzene-d4 (1,4-BTMSB-d4) were used as reference standards for 31P-qNMR and 1H-qNMR, respectively, in methanol-d4. The purity of SOF determined by 31P-qNMR was 100.63 ± 0.95%, whereas that determined by 1H-qNMR was 99.07 ± 0.50%. The average half bandwidths of the 31P signal of PAA and SOF were 3.38 ± 2.39 and 2.22 ± 0.19 Hz, respectively, suggesting that the T2 relaxation time of the PAA signal was shorter than that of SOF and varied among test laboratories. This difference most likely arose from the instability in the chemical shift due to the deuterium exchange of the acidic protons of PAA, which decreased the integrated intensity of the PAA signal. Next, an aprotic solvent, dimethyl sulfoxide-d6 (DMSO-d6), was used as the dissolving solvent with PAA and sodium 4,4-dimethyl-4-silapentanesulfonate-d6 (DSS-d6) as reference standards for 31P-qNMR and 1H-qNMR, respectively. SOF purities determined by 31P-qNMR and 1H-qNMR were 99.10 ± 0.30 and 99.44 ± 0.29%, respectively. SOF purities determined by 31P-qNMR agreed with the established 1H-qNMR values, suggesting that an aprotic solvent is preferable for 31P-qNMR because it is unnecessary to consider the effect of deuterium exchange.

Synthesis of Norgestomet and its 17ß-isomer and evaluation of their agonistic activities against progesterone receptor.

Norgestomet is a synthetic progesterone derivative applied in veterinary medicine to control estrus and ovulation in cattle. Norgestomet has been widely used in the livestock industry to promote the synchronization of estrus in cattle and increase pregnancy rates. However, highly reproducible synthetic methods for Norgestomet have been rarely reported. Here, we described a method for the synthesis of Norgestomet and performed quantitative NMR analysis to determine the purity of the products. Moreover, the agonistic activity of the synthesized compounds against progesterone receptors (PRs) was evaluated using an alkaline phosphatase assay. We synthesized Norgestomet with 97.9% purity that exhibited agonistic activity against PR with EC50 values of 4.5 nM. We also synthesized the 17ß-isomer of Norgestomet with 92.7% purity that did not exhibit any PR agonistic activity. The proposed synthetic route of Norgestomet can facilitate the assessment of residual Norgestomet in foods.

[Changes in Test Methods for Internationalization in the Japanese Pharmacopoeia (Part 2): Establishment of a Quantitative Method for Lorazepam Using HPLC Analysis].

The Japanese Pharmacopoeia (JP) is an official normative publication that is referred to, for establishing the authenticity and properties and maintaining the quality of pharmaceutics in Japan. Partial amendments are periodically made to these guidelines to keep up with the progress of science and technology, and the international harmonization is revised every 5 years. Thus, "Internationalization of the JP" is one of the more important issues to address for the revision of the JP. For example, the incorporation of the test methods that have been used in other pharmacopeias, such as the United States Pharmacopeia (USP) and the European Pharmacopoeia (EP), into the JP is a useful approach. In light of this, we have recently reported changes in test methods in the 17th JP, "Establishment of a quantitative test method for clonidine hydrochloride from using a potentiometric titration method to using HPLC". As a part of our ongoing research to change test methods for internationalization, we selected lorazepam. Lorazepam is analyzed using a potentiometric titration method as listed in the 17th JP; however, both the USP and EP use HPLC for quantitative analysis of this drug. In this study, we synthesized the related impurities of lorazepam listed in the USP and the EP and determined their purities using quantitative NMR. The separation conditions of these compounds, including lorazepam, were examined using HPLC and simultaneous analyses were performed. In addition, lorazepam extracted from the tablets was analyzed using conditions similar to those used for the analysis of the related impurities.

Miroestrol Quantification in Pueraria mirifica Crude Drugs and Products by Single-Reference UPLC/PDA/MS Using Relative Molar Sensitivities to Kwakhurin.

Owing to occasional health damages caused by health food products derived from Pueraria mirifica (PM), the Japanese government has designated PM as an "ingredient calling for special attention." Miroestrol is a specific isoflavone isolated from PM and possesses very strong estrogenic activity enough to induce side effects in small amount. Therefore, routine analyses for miroestrol quantification is recommended to control the safety and quality of PM products. However, miroestrol content in PM is quite low, and commercial reagent for its detection is rarely available. In this study, we developed a quantitative analysis method for miroestrol in PM without using its analytical standard by using the relative molar sensitivity (RMS) of miroestrol to kwakhurin, another PM-specific isoflavone, as a reference standard. The RMS value was obtained by an offline combination of 1H-quantitative NMR spectroscopy and a LC/photo diode array (PDA) and miroestrol content was determined by single-reference LC/PDA using RMS. Furthermore, we investigated miroestrol content in commercially available PM crude drugs and products, and the RMS method was compared with the conventional calibration curve method in terms of performance. The rate of concordance of miroestrol contents determined by two method was 89-101%. The results revealed that our developed LC/PDA/MS method with RMS using kwakhurin as a reference standard was accurate for routine monitoring of miroestrol content in PM crude drugs and products to control their quality.

[Changes in Test Methods for Internationalization in the Japanese Pharmacopoeia (Part 1): Establishment of a Quantitative Test Method for Clonidine Hydrochloride Using HPLC Analysis].

The Japanese Pharmacopoeia (JP) is an official normative guide for maintaining the authenticity of properties and qualities of medicine in Japan. The JP is revised every 5 years, and partial amendments are made from time to time to keep abreast with progress in science and technology and international harmonization. We are conducting a related study on the elimination of toxic reagents from the JP. The elimination of toxic reagents is an important study in relation to the five pillars of the revision of the 18th JP, "Improvement in quality by proactively introducing the latest knowledge and technological advances". In addition, "Internationalization of the JP" is an important issue to be addressed during revision of the JP. Considering international harmonization of the JP, it is important to incorporate the test methods that have been used in other pharmacopoeia, such as the United States Pharmacopeia (USP) and the European Pharmacopoeia (EP) in the JP. To achieve the above, herein, we selected clonidine hydrochloride, which is listed in the 17th JP. A potentiometric titration method is used as a quantitative method for clonidine hydrochloride in the 17th JP; in contrast, a HPLC method is utilized in the USP and the EP. In this study, we synthesized impurities of clonidine hydrochloride and determined their purities using quantitative NMR. In addition, the complete separation conditions of these compounds by HPLC were examined, and simultaneous analysis was performed.

Purity Determination of Cyclophosphamide Hydrate by Quantitative 31P-NMR and Method Validation.

Recently, quantitative NMR (qNMR), especially 1H-qNMR, has been widely used to determine the absolute quantitative value of organic molecules. We previously reported an optimal and reproducible sample preparation method for 1H-qNMR. In the present study, we focused on a 31P-qNMR absolute determination method. An organophosphorus compound, cyclophosphamide hydrate (CP), listed in the Japanese Pharmacopeia 17th edition was selected as the target compound, and the 31P-qNMR and 1H-qNMR results were compared under three conditions with potassium dihydrogen phosphate (KH2PO4) or O-phosphorylethanolamine (PEA) as the reference standard for 31P-qNMR and sodium 4,4-dimethyl-4-silapentanesulfonate-d6 (DSS-d6) as the standard for 1H-qNMR. Condition 1: separate sample containing CP and KH2PO4 for 31P-qNMR or CP and DSS-d6 for 1H-qNMR. Condition 2: mixed sample containing CP, DSS-d6, and KH2PO4. Condition 3: mixed sample containing CP, DSS-d6, and PEA. As conditions 1 and 3 provided good results, validation studies at multiple laboratories were further conducted. The purities of CP determined under condition 1 by 1H-qNMR at 11 laboratories and 31P-qNMR at 10 laboratories were 99.76 ± 0.43 and 99.75 ± 0.53%, respectively, and those determined under condition 3 at five laboratories were 99.66 ± 0.08 and 99.61 ± 0.53%, respectively. These data suggested that the CP purities determined by 31P-qNMR are in good agreement with those determined by the established 1H-qNMR method. Since the 31P-qNMR signals are less complicated than the 1H-qNMR signals, 31P-qNMR would be useful for the absolute quantification of compounds that do not have a simple and separate 1H-qNMR signal, such as a singlet or doublet, although further investigation with other compounds is needed.

Determination of Absolute Purities of Hygroscopic Substances by Quantitative NMR Analysis for the Standardization of Quantitative Reagents in the Japanese Pharmacopoeia (Part 2).

As a new absolute quantitation method for low-molecular compounds, quantitative NMR (qNMR) has emerged. In the Japanese Pharmacopoeia (JP), 15 compounds evaluated by qNMR are listed as reagents used as the HPLC reference standards in the assay of crude drug section of the JP. In a previous study, we revealed that humidity affects purity values of hygroscopic reagents and that (i) humidity control before and during weighing is important for a reproducible preparation and (ii) indication of the absolute amount (not purity value), which is not affected by water content, is important for hygroscopic products determined by qNMR. In this study, typical and optimal conditions that affect the determination of the purity of ginsenoside Rb1 (GRB1), saikosaponin a (SSA), and barbaloin (BB) (i.e., hygroscopic reagents) by qNMR were examined. First, the effect of humidity before and during weighing on the purity of commercial GRB1, with a purity value determined by qNMR, was examined. The results showed the importance afore-mentioned. The results of SSA, which is relatively unstable in the dissolved state, suggested that the standardization of humidity control before and during weighing for a specific time provides a practical approach for hygroscopic products. In regard to BB, its humidity control for a specific time, only before weighing, is enough for a reproducible purity determination.

Absolute Purity Determination of a Hygroscopic Substance, Indocyanine Green, Using Quantitative NMR (qNMR).

Quantitative NMR (qNMR) is applied to determine the absolute quantitative value of analytical standards for HPLC-based quantification. We have previously reported the optimal and reproducible sample preparation method for qNMR of hygroscopic reagents, such as saikosaponin a, which is used as an analytical standard in the assay of crude drug section of Japanese Pharmacopoeia (JP). In this study, we examined the absolute purity determination of a hygroscopic substance, indocyanine green (ICG), listed in the Japanese Pharmaceutical Codex 2002, using qNMR for standardization by focusing on the adaptation of ICG to JP. The purity of ICG, as an official non-Pharmacopoeial reference standard (non-PRS), had high variation (86.12 ± 2.70%) when preparing qNMR samples under non-controlled humidity (a conventional method). Additionally, residual ethanol (0.26 ± 0.11%) was observed in the non-PRS ICG. Next, the purity of non-PRS ICG was determined via qNMR when preparing samples under controlled humidity using a saturated sodium bromide solution. The purity was 84.19 ± 0.47% with a lower variation than that under non-controlled humidity. Moreover, ethanol signal almost disappeared. We estimated that residual ethanol in non-PRS ICG was replaced with water under controlled humidity. Subsequently, qNMR analysis was performed when preparing samples under controlled humidity in a constant temperature and humidity box. It showed excellent results with the lowest variation (82.26 ± 0.19%). As the use of a constant temperature and humidity box resulted in the lowest variability, it is recommended to use the control box if the reference ICG standard is needed for JP assays.

[Determination of Absolute Purities of Hygroscopic Substances by Quantitative NMR Analysis for the Standardization of Quantitative Reagents in the Japanese Pharmacopoeia (Part 1)].

Quantitative NMR (qNMR) has been developed as an absolute quantitation method to determine the purity or content of organic compounds including marker compounds in crude drugs. The "qNMR test" has been introduced into the crude-drug section of the Japanese Pharmacopoeia (JP) for determining the purity of reagents used for the assay in the JP. In Supplement II to the JP 17th edition published in June 2019, fifteen compounds adopted qNMR test were listed as the reagents for the assay. To establish the "qNMR test" in the crude drug section of the JP, there were several problems to be solved. Previously, we reported that the handling impurity signals from reference substances and targeted marker compounds, chemical shifts of reference substances, and peak unity of signals of targeted marker compounds are important factors to conduct qNMR measurements with intended accuracy. In this study, we investigated that the hygroscopicity of reagents could cause the changes in the compounds' purity depending on increasing their water content. Twenty-one standard products used for the crude-drug test in JP were examined by water sorption-desorption analysis, and ginsenosides and saikosaponins were found to be hygroscopic. To prepare a sample solution of saikosaponin b2 for qNMR analysis, samples need to be maintained for 18 h at 25°C and 76% relative humidity; further, samples need to be weighed at the same humidity for the qNMR analysis.

Facile Synthesis of Kwakhurin, a Marker Compound of Pueraria mirifica and Its Quantitative NMR Analysis for Standardization as a Reagent.

The side effects of kwao keur dietary supplements (obtained from the tuberous root of Pueraria mirifica) have recently been reported by the Ministry of Health, Labour and Welfare, Japan. To control the quality of kwao keur products, its ingredients need to be maintained by characteristic marker compounds, such as miroestrol, deoxymiroestrol, and kwakhurin (KWA). In this study, we described the facile synthesis of KWA, a marker compound of P. mirifica. Our revised synthetic method produced KWA with shorter steps and higher yield than the reported method. Furthermore, the absolute purity of KWA was determined by quantitative NMR analysis for standardization as a reagent, and its purity was 92.62 ± 0.12%.

Chemical Analysis of Counterfeit Hepatitis C Drug Found in Japan.

In January 2017, counterfeits of the hepatitis C drug 'HARVONI® Combination Tablets' (HARVONI®) were found at a pharmacy chain through unlicensed suppliers in Japan. A total of five lots of counterfeit HARVONI® (samples 1-5) bottles were found, and the ingredients of the bottles were all in tablet form. Among them, two differently shaped tablets were present in two of the bottles (categorized as samples 2A, 2B, 4A, and 4B). We analyzed the total of seven samples by high-resolution LC-MS, GC-MS and NMR. In samples 2A, 3 and 4B, sofosbuvir, the active component of another hepatitis C drug, SOVALDI® Tablets 400 mg (SOVALDI®), was detected. In sample 4A, sofosbuvir and ledipasvir, the active components of HARVONI®, were found. A direct comparison of the four samples and genuine products showed that three samples (2A, 3, 4B) are apparently SOVALDI® and that sample 2A is HARVONI®. In samples 1 and 5, several vitamins but none of the active compounds usually found in HARVONI® (i.e., sofosbuvir and ledipasvir) were detected. Our additional investigation indicates that these two samples are likely to be a commercial vitamin supplement distributed in Japan. Sample 2B, looked entirely different from HARVONI® and contained several herbal constitutents (such as ephedrine and glycyrrhizin) that are used in Japanese Kampo formulations. A further analysis indicated that sample 2B is likely to be a Kampo extract tablet of Shoseiryuto which is distributed in Japan. Considering this case, it is important to be vigilant to prevent a recurrence of distribution of counterfeit drugs.

Evaluation of the taste of crude drug and Kampo formula by a taste-sensing system (4): taste of Processed Aconite Root.

It is difficult to describe the taste of Processed Aconite Root (PAR) because it contains toxic compounds, and tasting poses some risk to the examiner. Therefore, there is no description of the taste of PAR in the latest Japanese Pharmacopoeia, although the taste of crude drugs has been regulated as a criterion for judgment. In this study, we revealed the objective taste of PAR by using a taste-sensing system. The PAR samples examined were classified into four types by how the samples were processed: PAR1 processed by autoclaving; PAR2-a processed by autoclaving after rinsing in salt (sodium chloride) solution; PAR2-h processed by heating after rinsing in calcium chloride solution; PAR3 processed by treating with hydrated lime after rinsing in salt solution. The most characteristic taste factor of PAR is an aftertaste of cationic bitterness, which was detected in all PAR sample solutions, even at the concentration of 0.1 mg/ml. In addition, anionic bitterness and saltiness were detected in all sample solutions at 1 mg/ml. Furthermore, umami was detected in the PAR1, PAR2-a, and PAR3 sample solutions at 1 mg/ml. Detailing the analyses of the four taste factors on the four sample types, we found each type has its own characteristic taste pattern. On the basis of these results, we proposed a method for discriminating one PAR type from another by using the system.