Low acoustic attenuation silicone rubber lens for medical ultrasonic array probe.

Effects of heavy density (rho = 9.2 x 10(3) kg/m(3)) Yb(2)O(3) fine dopant (16 nm in diameter) on the acoustic properties of a high-temperature-vulcanization (HTV) silicone rubber have been investigated, to develop a new acoustic lens material with a low acoustic attenuation (alpha) for the medical array probe application. The HTV silicone rubber has advantages in that it shows a lower alpha than that of a room-temperature-vulcanization (RTV) silicone rubber and it can be mixed by applying shear stress, using roll-milling equipment. Roll-milling time dependence of the HTV silicone rubber indicates that the alpha is closely affected by the dispersion of nanopowders in the rubber matrix. The 8 vol% Yb(2)O(3)-doped HTV silicone rubber mixed for 30 min showed the lowest alpha of 0.73 dB/mm MHz with an acoustic impedance [AI = sound speed (c) x density (rho)] of 1.43 x 10(6) kg/m(2)s at 37 degrees C. Moreover, simulation results reveal that a 5 MHz linear probe using the HTV silicone rubber doped with Yb(2)O(3) powder showed relative sensitivity around 2.6 to 3.0 dB higher than a probe using RTV silicone rubber doped with Yb(2)O(3) powder or SiO2-doped conventional silicone rubber for the ultrasonic medical application.

Effects of fine metal oxide particle dopant on the acoustic properties of silicone rubber lens for medical array probe.

The effects of fine metal oxide particles, particularly those of high-density elements (7.7 to 9.7 x 10(3) kg/m3), on the acoustic properties of silicone rubber have been investigated in order to develop an acoustic lens with a low acoustic attenuation. Silicone rubber doped with Yb2O3 powder having nanoparticle size of 16 nm showed a lower acoustic attenuation than silicone rubber doped with powders of CeO2, Bi2O3, Lu2O3 and HfO2. The silicone rubber doped with Yb2O3 powder showed a sound speed of 0.88 km/s, an acoustic impedance of 1.35 x 10(6) kg/m2s, an acoustic attenuation of 0.93 dB/mmMHz, and a Shore A hardness of 55 at 37 degrees C. Although typical silicone rubber doped with SiO2 (2.6 x 10(3) kg/m3) shows a sound speed of about 1.00 km/s, heavy metal oxide particles decreased the sound velocities to lower than 0.93 km/s. Therefore, an acoustic lens of silicone rubber doped with Yb2O3 powder provides increased sensitivity because it realizes a thinner acoustic lens than is conventionally used due to its low sound speed. Moreover, it has an advantage in that a focus point is not changed when the acoustic lens is pressed to a human body due to its reasonable hardness.

Piezoelectric ceramics with high dielectric constants for ultrasonic medical transducers.

Complex system ceramics Pb(Sc(1/2)Nb(1/2))O3-Pb(Mg(1/3)Nb(2/3))O3-Pb(Ni(1/2)Nb(1/2))O3-(Pb0.965,Sr0.035) (Zr,Ti)O3 (PSN-PMN-PNN-PSZT abbreviated PSMNZT) have been synthesized by the conventional technique, and dielectric and piezoelectric properties of the ceramics have been investigated for ultrasonic medical transducers. High capacitances of the transducers are desired in order to match the electrical impedance between the transducers and the coaxial cable in array probes. Although piezoelectric ceramics that have high dielectric constants (epsilon33t/epsilon0 > 5000, k'33 < 70%) are produced in many foundries, the dielectric constants are insufficient. However, we have reported that low molecular mass B-site ions in the lead-perovskite structures are important in realizing better dielectric and piezoelectric properties. We focused on the complex system ceramics PSMNZT that consists of light B-site elements. The maximum dielectric constant, epsilon33T/epsilon0 = 7, 200, was confirmed in the ceramics, where k'33 = 69%, d33 = 940 pC/N, and T(c) = 135 degrees C were obtained. Moreover, pulse-echo characteristics were simulated using the Mason model. The PSMNZT ceramic probe showed echo amplitude about 5.5 dB higher than that of the conventional PZT ceramic probe (PZT-5H type). In this paper, the electrical properties of the PSMNZT ceramics and the simulation results for pulse-echo characteristics of the phased-array probes are introduced.

Present and future of piezoelectric single crystals and the importance of B-site cations for high piezoelectric response.

High quality piezoelectric single crystals, such as Pb(Zn(1/3)Nb(2/3))O3-PbTiO3 (PZNT) and Pb(Mg(1/3)Nb(2/3))O3-PbTiO3 (PMNT), have been investigated, and, because their piezoelectric properties are greatly superior to those of Pb(Zr(1-x)Ti(x))O3 (PZT) ceramics, they have been used for certain transducer applications since the late 1990s. The present situation for these relaxor-PT (lead titanate) single crystals is summarized. In this review, some possible high Tc > 200 degrees C single crystals are also introduced. Single crystals of Pb(In(1/2)Nb(1/2))O3-PbTiO3 (PINT) binary system and Pb(Mg(1/3)Nb(2/3))O3-Pb(Sc(1/2)Nb(1/2))O3-PbTiO3 (PSMNT) tertiary system have been synthesized, and their electrical properties are reported. In addition, a novel guiding principle for discovering excellent piezoelectric materials, namely the presence of low molecular mass B-site ions that can enter the lead-perovskite Pb(B'B'')O3 structure, is introduced.