ABSTRACT
In response to the heightened awareness of infectious diseases and the growing emphasis on personal protection in daily life, the utilization of natural bioresources for textile fabric dyeing has garnered substantial research attention. This is particularly due to their ability to confer antibacterial and UV protection properties to fabrics. In this study, the dyeing properties of Mimusops elengi Linn extract, alone and mordanted, were evaluated on blended wool/acrylic and silk fabrics, along with an assessment of their antibacterial and UV protection characteristics. The dyed fabrics exhibited good color strength and color fastness. Quantitative assessment of antibacterial activity was conducted using the reduction percentage test, while UV protection properties were determined through the measurement of Ultraviolet Protection Factor (UPF). Aqueous extract alone, when applied to blended wool/acrylic fabric, demonstrated an impressive 99.88 % reduction against Staphylococcus aureus, and 48.33 % for silk fabric, albeit less effective against Escherichia coli. Notably, when fabrics were dyed with a combination of leaves extract and various metal salt mordants, a substantial improvement in antibacterial properties was observed. Zinc and copper salts, in particular, exhibited the ability to enhance antibacterial properties to almost 100 % against Staphylococcus aureus and Escherichia coli in both blended wool/acrylic and silk fabrics. Concurrently, this combination contributed to an increase in the UV protection property of both fabrics. The findings underscore the potential of plant-based natural dye for blended wool/acrylic and silk fabrics, imparting antimicrobial and UV protection properties. This has significant implications in preventing the spread of infections and skin diseases, emphasizing the vital role of such textiles in promoting health and well-being.
ABSTRACT
The demand of natural cellulosic fibers has been increasing day by day due to their versatile uses and eco-friendly nature. The reason behind this demand is due to some unique properties of natural fibers that are suitable for several fibrous applications such as in composite, textile, nano-materials, conductive carbon, biomaterials etc. In this study, a new natural cellulosic fiber is extracted from the bark of the jack tree branches by water retting process. The fiber is characterized by standard methods. The result of the chemical compositions of the fiber shows that it contains α-cellulose 79.32%, hemicellulose 8.01%, lignin 6.77%, ash 3.58% and extractives 2.32%. XRD analysis reveals its high level of crystallinity (86%) and the microfibrillar angle (MFA) calculated from the XRD data is found -29°. The FTIR analysis confirms the presence of expected functional groups. Thermogravimetric analysis (TGA) and the derivative thermogravimetric (DTG) reveal its good thermal stability and the maximum degradation occurred at 358 °C for the degradation of the α-cellulose. The density of the fiber is found 1.05 g/cc, which is lower compared to many other known natural fibers. All these properties of this new fiber are suitable for several sophisticated fibrous applications such as reinforcement in composite, textile, cellulose nano-materials, activated or conductive carbon, biomaterials etc.
ABSTRACT
The ß-diketiminatophosphane Pd complex acted as a powerful catalyst for the Heck coupling of aryl chlorides with alkenes. Various aryl and heteroaryl chlorides were coupled efficiently under relatively mild conditions. Furthermore, this catalytic system also proved to be highly active in the Buchwald-Hartwig coupling of deactivated and sterically hindered aryl chlorides at room temperature.