COMPARISON OF CBCT AND CT IN TERMS OF DOSE VALUE OF ORGANS AT RISK IN PARANASAL SINUS IMAGING.

Irradiated dose to the organs at risk surrounding the paranasal sinuses was compared in cone beam computed tomography (CBCT) and multi spiral computed tomography with respect to the organs' relative positions to the imaging field. A head and neck Alderson-Rando phantom equipped with thermoluminescence dosemeters pellets was irradiated according to three routine CBCT protocols and one protocol in multi spiral computed tomography. Dose value of organs outside the imaging field as well as those measured dose of organs inside the field were assessed. The highest measured doses were obtained from CT scan for most of the organs investigated in this study, whereas the lowest one was associated with the low-resolution mode of CBCT. Also, statistical analysis showed no significant differences between the dose values of out-of-field organs in all CBCT modes, whereas significant differences were observed between the radiation doses of CT and CBCT modes for all organs at risk inside and outside of the imaging field. CBCT is recommended on the basis of having a lower dose; however, the image qualities were the same in the two employed modalities, so the approach of lower dose can be made.

Effect of annealing temperature and dopant concentration on the thermoluminescence sensitivity in LiF:Mg,Cu,Ag material.

LiF:Mg,Cu,Ag is a new dosimetry material that is similar to LiF:Mg,Cu,P in terms of dosimetric properties. The effect of the annealing temperature in the range of 200 to 350°C on the thermoluminescence (TL) sensitivity and the glow curve structure of this material at different concentrations of silver (Ag) was investigated. It has been demonstrated that the optimum values of the annealing temperature and the Ag concentration are 240°C and 0.1 mol% for better sensitivity, respectively. The TL intensity decreases at annealing temperatures lower than 240°C or higher than 240°C, reaching a minimum at 300°C and then again increases for various Ag concentrations. It was observed that the glow curve structure altered and the area under the low temperature peak as well as the area under the main dosimetric peak decreased with increasing annealing temperature. The position of the main dosimetric peak moved in the direction of higher temperatures, but at 320 and 350°C annealing temperatures, it shifted to lower temperatures. It was also observed that the TL sensitivity could partially be recovered by a combined annealing procedure.

Evaluation of the radiation dose in the thyroid gland using different protective collars in panoramic imaging.

BACKGROUND: The value for the use of thyroid shield is one of the issues in radiation protection of patients in dental panoramic imaging. OBJECTIVES: The objective of this research is to investigate the attenuation characteristics of some models of thyroid shielding in dental panoramic examinations. METHODS: The effects of five different types of lead and lead-free (Pb-equivalent) shields on dose reduction of thyroid gland were investigated using implanted Thermoluminescence Dosemeters (TLDs) in head-neck parts of a Rando phantom. RESULTS: The results show that frontal lead and Pb-equivalent shields can reduce the thyroid dose around 50% and 19%, respectively. CONCLUSIONS: It can be concluded that the effective shielding area is an important parameter in thyroid gland dose reduction. Lead frontal collars with large effective shielding areas (>~300 cm2 but not necessarily very large) are appropriate for an optimized thyroid gland dose reduction particularly for the critical patients in dental panoramic imaging. Regardless of the shape and thickness, using the Pb-equivalent shields is not justifiable in dental panoramic imaging.