Neutralization potential determination of siderite (FeCO3) using selected oxidants.

Siderite (FeCO3) is commonly found in coal overburden and, when present, can cause interference in the determination of neutralization potential (NP). Under acidic testing conditions, FeCO3 reacts to neutralize acid, which contributes to the NP. However, continued weathering of FeCO3 (oxidation of Fe2+ and hydrolysis of Fe3+) produces a neutral to slightly acidic solution. The effects of hydrogen peroxide (H2O2), potassium permanganate (KMnO4), and O2 on the laboratory measurement of NP of siderite samples taken from overburden were examined. All oxidation treatments lowered the NP values of the siderite samples as compared with the standard USEPA method. However, oxidation with H2O2 produced variable results depending on the amount of H2O2 added. Neutralization potential values obtained after oxidation treatments were highly correlated with Mn concentration. Reaction products (i.e., 2-line ferrihydrite) of siderite samples with H2O2 and KMnO4 were not representative of natural siderite weathering. Oxidation with O2 produced the lowest NP values for siderite samples. The reaction products produced by oxidation with O2 most closely represent those intermediate products formed when siderite is exposed to atmospheric weathering conditions. Oxidation with O2 also proved to be the most reproducible method for accurately assessing NP when siderite is present in overburden samples.

Dissolution kinetics of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

Micronutrient-substituted synthetic hydroxyapatite (SHA) is being evaluated by the National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program for crop production on long-duration human missions to the International Space Station or for future Lunar or Martian outposts. The stirred-flow technique was utilized to characterize Ca, P, Fe, Mn, and Cu release characteristics from Fe-, Mn-, and Cu-containing SHA in deionized (DI) water, citric acid, and diethylene-triamine-pentaacetic acid (DTPA). Initially, Ca and P release rates decreased rapidly with time and were controlled by a non-SHA calcium phosphate phase(s) with low Ca/P solution molar ratios (0.91-1.51) relative to solid SHA ratios (1.56-1.64). At later times, Ca/P solution molar ratios (1.47-1.79) were near solid SHA ratios and release rates decreased slowly indicating that SHA controlled Ca and P release. Substituted SHA materials had faster dissolution rates relative to unsubstituted SHA. The initial metal release rate order was Mn >> Cu > Fe which followed metal-oxide/phosphate solubility suggesting that poorly crystalline metal-oxides/phosphates were dominating metal release. Similar metal release rates for all substituted SHA (approximately 0.01 cmol kg-1 min-1) at the end of the DTPA experiment indicated that SHA dissolution was supplying the metals into solution and that poorly crystalline metal-oxide/phosphates were not controlling metal release. Results indicate that non-SHA Ca-phosphate phases and poorly crystalline metal-oxide/phosphates will contribute Ca, P, and metals. After these phases have dissolved, substituted SHA will be the source of Ca, P, and metals for plants.

Iron sulfide oxidation as influenced by calcium carbonate application.

Two overburden materials, with different FeS2 contents (1.9 and 4.1%) and low acid neutralization potential, were limed with CaCO3 at rates of 0, 25, 50, 75, 100, and 125% based on the amount of CaCO3 needed to provide an acid-base account deficit (A/Ba) of zero (A/Ba = neutralization potential--potential acidity--exchangeable acidity). The limed overburden materials were inoculated with Thiobacillus ferrooxidans and leached weekly with deionized water. Residual FeS2 and CaCO3 were determined in samples over a 378-d period. Oxidation followed zero-order kinetics with respect to FeS2 concentration at pH values greater than 4 and first-order kinetics at pH values less than 4. Zero-order oxidation rates ranged from 0.01 to 0.46 micromol g(-1) d(-1) in the overburden with 1.9% FeS2 and from 0.01 to 0.22 micromol g(-1) d(-1) in the overburden with 4.1% FeS2. Oxidation following the first-order rate law had a first-order rate constant of 0.03 d(-1) in the 1.9% FeS2 overburden and 0.01 d(-1) in the 4.1% FeS2 overburden. The calculated half-life was 23 d for the 1.9% FeS2 overburden and 69 d for the 4.1% FeS2 overburden. Additions of CaCO3 affected FeS2 oxidation by controlling the pH of the system. Liming to greater than 50% of the acid-base account deficit did not significantly affect the zero-order oxidation rate. Dissolution of the applied CaCO3 was found to be faster than the oxidation of FeS2 at pH values greater than 4. It was projected that at lime rates up to 125%, the CaCO3 would dissolve and leach out of the system before all the FeS2 oxidized, leaving the potential for acid minesoil formation.

Mineralogical and chemical characterization of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

The National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program is evaluating the use of Fe-, Mn-, and Cu-containing synthetic hydroxyapatite (SHA) as a slow release fertilizer for crops that might be grown on the International Space Station or at Lunar and Martian outposts. Separate Fe-, Mn-, and Cu-containing SHA materials along with a transition-metal free SHA (pure-SHA) were synthesized using a precipitation method. Chemical and mineralogical analyses determined if and how Fe, Mn, and Cu were incorporated into the SHA structure. X-ray diffraction (XRD), Rietveld refinement, and transmission electron microscopy (TEM) confirmed that SHA materials with the apatite structure were produced. Chemical analyses indicated that the metal containing SHA materials were deficient in Ca relative to pure-SHA. The shift in the infrared PO4-mu 3 vibrations, smaller unit cell parameters, smaller particle size, and greater structural strain for Fe-, Mn-, and Cu-containing SHA compared with pure-SHA suggested that Fe, Mn, and Cu were incorporated into SHA structure. Rietveld analyses revealed that Fe, Mn, and Cu substituted into the Ca2 site of SHA. An Fe-rich phase was detected by TEM analyses and backscattered electron microscopy in the Fe-containing SHA material with the greatest Fe content. The substitution of metals into SHA suggests that metal-SHA materials are potential slow-release sources of micronutrients for plant uptake in addition to Ca and P.

Comparative uptake of plutonium from soils by Brassica juncea and Helianthus annuus.

Plutonium uptake by Brassica juncea (Indian mustard) and Helianthus annuus (sunflower) from soils with varying chemical composition and contaminated with Pu complexes (Pu-nitrate [239Pu(NO3)4], Pu-citrate [239Pu(C6H5O7)], and Pu-diethylenetriaminepentaacetic acid (Pu-DTPA [239Pu-C14H23O10N3]) was investigated. Sequential extraction of soils incubated with applied Pu was used to determine the distribution of Pu in the various soil fractions. The initial Pu activity levels in soils were 44.40-231.25 Bq g(-1) as Pu-nitrate Pu-citrate, or Pu-DTPA. A difference in Pu uptake between treatments of Pu-nitrate and Pu-citrate without chelating agent was observed only with Indian mustard in acidic Crowley soil. The uptake of Pu by plants was increased with increasing DTPA rates, however, the Pu concentration of plants was not proportionally increased with increasing application rate of Pu to soil. Plutonium uptake from Pu-DTPA was significantly higher from the acid Crowley soil than from the calcareous Weswood soil. The uptake of Pu from the soils was higher in Indian mustard than in sunflower. Sequential extraction of Pu showed that the ion-exchangeable Pu fraction in soils was dramatically increased with DTPA treatment and decreased with time of incubation. Extractability of Pu in all fractions was not different when Pu-nitrate and Pu-citrate were applied to the same soil. More Pu was associated with the residual Pu fraction without DTPA application. Consistent trends with time of incubation for other fractions were not apparent. The ion-exchangeable fraction, assumed as plant-available Pu, was significantly higher in acid soil compared with calcareous soil with or without DTPA treatment. When the calcareous soil was treated with DTPA, the ion-exchangeable Pu was comparatively less influenced. This fraction in the soil was more affected with time of incubation. The lowest extractable Pu was from a pH 6.55 Crockett soil that contained the highest clay compared to the other two soils. Extractable soil Pu was largely affected by soil pH and the amounts of clay, salt, metal oxide, and carbonate.

Solid state 31phosphorus nuclear magnetic resonance of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method. The proximity (<1 nm) of the transition metals to the 31P nuclei of SHA were apparent when comparing the integrated 31P signal intensities of the pure-SHA (87 arbitrary units g-1) with the Fe-, Mn-, and Cu-SHA materials (37-71 arbitrary units g-1). The lower integrated 31P signal intensities of the Fe-, Mn-, and Cu-SHA materials relative to the pure-SHA suggested that Fe3+, Mn2+, and Cu2+ were incorporated in the SHA structure. Further support for Fe3+, Mn2+, and Cu2+ incorporation was demonstrated by the reduced spin-lattice relaxation constants of the Fe-, Mn-, and Cu-SHA materials (T'=0.075-0.434s) relative to pure-SHA (T1=58.4s). Inversion recovery spectra indicated that Fe3+, Mn2+, and Cu2+ were not homogeneously distributed about the 31P nuclei in the SHA structure. Extraction with diethylene-triamine-penta-acetic acid (DTPA) suggested that between 50 and 80% of the total starting metal concentrations were incorporated in the SHA structure. Iron-, Mn-, and Cu-containing SHA are potential slow release sources of Fe, Mn, and Cu in the ALS cropping system.

Uptake and translocation of plutonium in two plant species using hydroponics.

This study presents determinations of the uptake and translocation of Pu in Indian mustard (Brassica juncea) and sunflower (Helianthus annuus) from Pu contaminated solution media. The initial activity levels of Pu were 18.50 and 37.00 Bq ml(-1), for Pu-nitrate [239Pu(NO3)4] and for Pu-citrate [239Pu(C6H5O7)+] in nutrient solution. Plutonium-diethylenetriaminepentaacetic acid (DTPA: [239Pu-C14H23O10N3] solution was prepared by adding 0, 5, 10, and 50 microg of DTPA ml(-1) with 239Pu(NO3)4 in nutrient solution. Concentration ratios (CR, Pu concentration in dry plant material/Pu concentration in nutrient solution) and transport indices (Tl, Pu content in the shoot/Pu content in the whole plant) were calculated to evaluate Pu uptake and translocation. All experiments were conducted in hydroponic solution in an environmental growth chamber. Plutonium concentration in the plant tissue was increased with increased Pu contamination. Plant tissue Pu concentration for Pu-nitrate and Pu-citrate application was not correlated and may be dependent on plant species. For plants receiving Pu-DTPA, the Pu concentration was increased in the shoots but decreased in the roots resulting in a negative correlation between the Pu concentrations in the plant shoots and roots. The Pu concentration in shoots of Indian mustard was increased for application rates up to 10 microg DTPA ml(-1) and up to 5 microg DTPA ml(-1) for sunflower. Similar trends were observed for the CR of plants compared to the Pu concentration in the shoots and roots, whereas the Tl was increased with increasing DTPA concentration. Plutonium in shoots of Indian mustard was up to 10 times higher than that in shoots of sunflower. The Pu concentration in the apparent free space (AFS) of plant root tissue of sunflower was more affected by concentration of DTPA than that of Indian mustard.

Characterization of iron, manganese, and copper synthetic hydroxyapatites by electron paramagnetic resonance spectroscopy.

The incorporation of micronutrients (e.g., Fe, Mn, Cu) into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in NASA's Advanced Life Support (ALS) program for long-duration space missions. Separate Fe3+ (Fe-SHA), Mn2+ (Mn-SHA), and Cu2+ (Cu-SHA) containing SHA materials were synthesized by a precipitation method. Electron paramagnetic resonance (EPR) spectroscopy was used to determine the location of Fe3+, Mn2+, and Cu2+ ions in the SHA structure and to identify other Fe(3+)-, Mn(2+)-, and Cu(2+)-containing phases that formed during precipitation. The EPR parameters for Fe3+ (g=4.20 and 8.93) and for Mn2+ (g=2.01, A=9.4 mT, D=39.0 mT and E=10.5 mT) indicated that Fe3+ and Mn2+ possessed rhombic ion crystal fields within the SHA structure. The Cu2+ EPR parameters (g(z)=2.488, A(z)=5.2 mT) indicated that Cu2+ was coordinated to more than six oxygens. The rhombic environments of Fe3+ and Mn2+ along with the unique Cu2+ environment suggested that these metals substituted for the 7 or 9 coordinate Ca2+ in SHA. The EPR analyses also detected poorly crystalline metal oxyhydroxides or metal-phosphates associated with SHA. The Fe-, Mn-, and Cu-SHA materials are potential slow release sources of Fe, Mn, and Cu for ALS and terrestrial cropping systems.

Factors affecting the ratio of cation exchange capacity to clay content in lignite overburden.

Unusually high cation exchange capacity (CEC) values relative to clay content are frequently reported for lignite overburden and minesoils. The CEC to percent clay ratio is commonly greater than one and would require that the average charge of the clay fraction be greater than 100 cmol(c) kg(-1). A comparison of methods for particle-size distribution suggests that the major reason lignite overburden samples have CEC to percent clay ratios greater than one is incomplete dispersion of aggregates of clay minerals or shale fragments. Preliminary investigations revealed the presence of shale fragments, smectite, and partially weathered mica in the silt fraction. Methods commonly used in soil textural analysis underestimated clay content by approximately 24%. The silt fraction may, therefore, provide a "hidden" source of CEC. Another important factor influencing the CEC to percent clay ratio was the presence of organic materials (lignite) in the samples. Lignite may make a significant contribution to CEC in overburden materials. In a study designed to estimate the pH-dependent charge of both the mineral and organic fractions, the CEC of overburden organic constituents was determined to be approximately 158 cmol(c) kg(-1) at pH 8.2. The high CEC to percent clay ratio in lignite overburden and minesoils may be resolved by adjusting methods for clay determination to optimize dispersion and by accounting for CEC due to organic materials. An alternative approach is to use existing methodology and use correction factors to account for incomplete dispersion of clay minerals and the charge contributions of organic materials.

Mobility of the herbicide pyrithiobac through intact soil columns.

The relative mobility of pyrithiobac [sodium 2-chloro-6-(4, 6-dimethoxypyrimidin-2-ylthio)benzoate], a new herbicide used for postemergence control of broadleaf weeds in cotton (Gossypium hirsutum), was evaluated and compared against that of bromide (Br(-)) tracer on four soils representative of cotton-growing regions using intact soil columns under saturated flow conditions. Pyrithiobac breakthrough curves were asymmetrical in shape with significant tailing and displaced to the left of 1 pore volume in the Houston Black clay (fine, montmorillonitic, thermic Udic Pellustert), Orelia fine sandy clay loam (fine-loamy, mixed, hyperthermic Typic Ochraqualfs), and Ships silty clay (very-fine, mixed, thermic Udic Chromustert) soils. Breakthrough of pyrithiobac in the Hidalgo sandy loam soil (fine-loamy, mixed, hyperthermic Typic Calciustoll) was delayed and more symmetrical, with peak pyrithiobac concentration reached after 1.2 pore volumes. The immobile pore water (IPW) fractions estimated from the Br(-) breakthrough curves ranged from 20 to 87% of total pore water. The IPW values demonstrated that soils with the greatest amount of IPW (Ships with IPW = 87.3%) exhibited the most rapid movement of pyrithiobac (peak concentration after 0.04 pore volume). The experimentally determined pyrithiobac breakthrough curves confirmed the high mobility of this herbicide in these alkaline and predominantly smectitic soils. These results indicate that pyrithiobac mobility was influenced by soil type and preferential flow processes when leached through intact soil columns.

Modeling transport kinetics in clinoptilolite-phosphate rock systems.

Nutrient release in clinoptilolite-phosphate rock (Cp-PR) systems occurs through dissolution and cation-exchange reactions. Investigating the kinetics of these reactions expands our understanding of nutrient release processes. Research was conducted to model transport kinetics of nutrient release in Cp-PR systems. The objectives were to identify empirical models that best describe NH4, K, and P release and define diffusion-controlling processes. Materials included a Texas clinoptilolite (Cp) and North Carolina phosphate rock (PR). A continuous-flow thin-disk technique was used. Models evaluated included zero order, first order, second order, parabolic diffusion, simplified Elovich, Elovich, and power function. The power-function, Elovich, and parabolic-diffusion models adequately described NH4, K, and P release. The power-function model was preferred because of its simplicity. Models indicated nutrient release was diffusion controlled. Primary transport processes controlling nutrient release for the time span observed were probably the result of a combination of several interacting transport mechanisms.

Solubility and cation exchange in phosphate rock and saturated clinoptilolite mixtures.

Mixtures of zeolite and phosphate rock (PR) have the potential to provide slow-release fertilization of plants in synthetic soils by dissolution and ion-exchange reactions. This study was conducted to examine solubility and cation-exchange relationships in mixtures of PR and NH4- and K-saturated clinoptilolite (Cp). Batch-equilibration experiments were designed to investigate the effect of PR source, the proportion of exchangeable K and NH4, and the Cp to PR ratio on solution N, P, K, and Ca concentrations. The dissolution and cation-exchange reactions that occurred after mixing NH4- and K-saturated Cp with PR increased the solubility of the PR and simultaneously released NH4 and K into solution. The more reactive North Carolina (NC) PR rendered higher solution concentrations of NH4 and K when mixed with Cp than did Tennessee (TN) PR. Solution P concentrations for the Cp-NC PR mixture and the Cp-TN PR mixture were similar. Solution concentrations of N, P, K, and Ca and the ratios of these nutrients in solution varied predictably with the type of PR, the Cp/PR ratio, and the proportions of exchangeable K and NH4 on the Cp. Our research indicated that slow-release fertilization using Cp/PR media may provide adequate levels of N, P, and K to support plant growth. Solution Ca concentrations were lower than optimum for plant growth.

Lunar outpost agriculture.

America's long-term commitment to a new Space Exploration Initiative has focused attention on the basic requirements for establishing a permanently manned lunar outpost and, ultimately, a martian one. High among these is the development of Regenerative Life Support Systems--with lunar agriculture an essential component--to provide a high level of self-sufficiency.