Dual-wavelength distributed feedback laser array based on four-phase-shifted sampled Bragg grating for terahertz generation.

We propose and experimentally demonstrate a dual-wavelength distributed feedback (DFB) laser array utilizing a four-phase-shifted sampled Bragg grating. By using this grating, the coupling coefficient is enhanced by approximately 2.83 times compared to conventional sampled Bragg gratings. The devices exhibit a stable dual-mode lasing achieved by introducing further π-phase shifts at 1/3 and 2/3 positions along the cavity. These devices require only one stage of lithography to define both the ridge waveguide and the gratings, mitigating issues related to misalignment between them. A dual-wavelength laser array has been fabricated with frequency spacings of 320 GHz, 500 GHz, 640 GHz, 800 GHz, and 1 THz. When integrated with semiconductor optical amplifiers, the output power of the device can reach 23.6 mW. Furthermore, the dual-wavelength lasing is maintained across a wide range of injection currents, with a power difference of <3 dB between the two primary modes. A terahertz (THz) signal has been generated through photomixing in a photoconductive antenna, with the measured power reaching 12.8 µW.

Observing perineuronal nets like structures via coaxial scattering quantitative interference imaging at multiple wavelengths.

Perineuronal nets (PNNs) are important functional structures on the surface of nerve cells. Observation of PNNs usually requires dyeing or fluorescent labeling. As a network structure with a micron grid and sub-wavelength thickness but no special optical properties, quantitative phase imaging (QPI) is the only purely optical method for high-resolution imaging of PNNs. We proposed a Scattering Quantitative Interference Imaging (SQII) method which measures the geometric rather than transmission or reflection phase during the scattering process to visualize PNNs. Different from QIP methods, SQII method is sensitive to scattering and not affected by wavelength changes. Via geometric phase shifting method, we simplify the phase shift operation. The SQII method not only focuses on interference phase, but also on the interference contrast. The singularity points and phase lines of the scattering geometric phase depict the edges of the network structure and can be found at the valley area of the interference contrast parameter SINDR under different wavelengths. Our SQII method has its unique imaging properties, is very simple and easy to implement and has more worth for promotion.

High Q-Factor, High Contrast, and Multi-Band Optical Sensor Based on Plasmonic Square Bracket Dimer Metasurface.

A high-performance resonant metasurface is rather promising for diverse application areas such as optical sensing and filtering. Herein, a metal-insulator-metal (MIM) optical sensor with merits of a high quality-factor (Q-factor), multiple operating bands, and high spectrum contrast is proposed using plasmonic square bracket dimer metasurface. Due to the complex square bracket itself, a dimer structure of two oppositely placed square brackets, and metasurface array configuration, multiple kinds of mode coupling can be devised in the inner and outer elements within the metasurface, enabling four sensing channels with the sensitivities higher than 200 nm/RIU for refractive index sensing. Among them, the special sensing channel based on the reflection-type surface lattice resonance (SLR) mechanism has a full width at half maximum (FWHM) of only 2 nm, a high peak-to-dip signal contrast of 0.82, a high Q-factor of 548, and it can also behave as a good sensing channel for the thickness measurement of the deposition layer. The multi-band sensor can work normally in a large refractive index or thickness range, and the number of resonant channels can be further increased by simply breaking the structural symmetry or changing the polarization angle of incident light. Equipped with unique advantages, the suggested plasmonic metasurface has great potential in sensing, monitoring, filtering, and other applications.

Quantification and characterization of an ultrasound-induced polarization wavefront aberration in the phase space.

Light propagation wavefront and photon composition variations occur when the beam encounters acoustic waves, bringing mechanical and chemical inhomogeneity-induced light-intensity modulation, while phase variations, which carry more information about the acoustic-optical coupling in the medium, are often overlooked. This paper investigates the coupling of the light beam with the propagating ultrasound and the polarization aberration of the optical wave induced by the ultrasound. A model was developed to express the variation of the ultrasound-induced polarization aberration (UIPA). The ultrasound-induced refractive index variation of the sample was observed in both the simulation and experiments. The phase differences in various ultrasound states (valley dominant state, peak dominant state) are characterized in detail. The UIPA expressed in the phase space provides a way to quantify multidimensional polarization information of the ultrasound-tagged optical waves and allows refraction-sensitive polarization parametric imaging, which may be exploited for directional high-contrast photoacoustic imaging with ultrasound tagging.

Surface plasmon resonance sensor based on polarization parameter SPR imaging.

Using polarization surface plasmon resonance (SPR) imaging as a sensor has the advantage of large throughput in detection, but its sensitivity has always been inferior to other SPR sensors. The high contrast of the two polarization parameters' images related to scattering determines the high sensitivity of this new polarization SPR imaging sensor. It provides a new direction for solving the issue of low sensitivity in polarization SPR imaging. The sensor system was optimized by numerical simulation, whilst the baseline noise and sensitivity of the system were obtained by saline solution and virus detection. When the reflective index of the NaCl solution is within the range of 1.3331 to 1.36, the average sensitivity can reach 9300 RIU-1, and the maximum sensitivity can reach 13000 RIU-1. Using this new polarization SPR imaging sensor, the H1N1 virus was differentiated, showing its promising application potential within the field of biomedicine.

Compact and broadband dual-polarization waveguide crossing utilizing subwavelength-hole-assisted MMI couplers.

In this Letter, an ultracompact silicon-based waveguide crossing for dual polarizations is proposed and experimentally demonstrated using subwavelength-hole-assisted multimode interference couplers. Thanks to the flexible and easy dispersion engineering in the introduced subwavelength-hole-assisted multimode interference couplers, the reduced and equal beat lengths for dual polarizations are accessible via careful parametric optimization, consequently enabling a substantially reduced device size. Experimental results indicate that the proposed crossing (13.6 × 13.6 µm2 in size) features a low insertion loss of 1.03 dB (0.76 dB) and low crosstalk of -32.5 dB (-37.8 dB) at a central wavelength of 1550 nm for TE (TM) mode, with a broad bandwidth of ∼80 nm for crosstalk of <-18 dB.

Millimeter-wave generation based on a monolithic dual-wavelength DFB laser with four phase-shifted sampled gratings and equivalent chirp technology.

A dual-wavelength DFB laser array based on four phase-shifted grating and equivalent chirp technology is first proposed, fabricated, and experimentally demonstrated. The dual-wavelength emitting is achieved by symmetrically introducing two π phase shifts into a chirped four phase-shifted sampled grating cavity. Meanwhile, the beating signal of the dual-wavelength output is stabilized by applying an electro-absorption modulator integrated at the rear of the cavity. Under different grating chirp rates, a series of RF signals from 66.8 GHz to 73.6 GHz with a linewidth of less than 210 kHz is obtained.

Sidewall grating slot waveguide microring resonator biochemical sensor.

Integrated microring resonator structures based on silicon-on-insulator (SOI) platforms are promising candidates for high-performance on-chip sensing. In this work, a novel sidewall grating slot microring resonator (SG-SMRR) with a compact size (5 µm center radius) based on the SOI platform is proposed and demonstrated experimentally. The experiment results show that the refractive index (RI) sensitivity and the limit of detection value are 620 nm/RIU and 1.4 × 10-4 RIU, respectively. The concentration sensitivity and minimum concentration detection limit are 1120 pm/% and 0.05%, respectively. Moreover, the sidewall grating structure makes this sensor free of free spectral range (FSR) limitation. The detection range is significantly enlarged to 84.5 nm in lab measurement, four times that of the FSR of conventional SMRRs. The measured Q-factor is 3.1 × 103, and the straight slot waveguide transmission loss is 24.2 dB/cm under sensing conditions. These results combined with the small form factor associated with a silicon photonics sensor open up applications where high sensitivity and large measurement range are essential.

Adaptive polarization photoacoustic computed tomography for biological anisotropic tissue imaging.

Most photoacoustic computed tomography (PACT) systems usually ignore the anisotropy of the tissue absorption coefficient, which will lead to the lack of information in reconstructed images. In this work, the effect is addressed of the possible optical absorption anisotropy of tissue on PACT images. The functional relationship is derived between the photoacoustic response and the polarization angle of the excitation light. An adaptive polarized light photoacoustic imaging (AP-PACT) approach is proposed and shown to make up for the lack of imaging information and achieve optimal image contrast when imaging samples with anisotropic optical absorption, by utilizing the standard deviation of photoacoustic response as the feedback signal in an adaptive data acquisition process. The method is implemented both on phantom and in vitro experiments, which show that AP-PACT can recover anisotropic absorption-related information from reconstructed images and thus significantly improve their quality.

Double slot micro ring resonators with inner wall angular gratings as ultra-sensitive biochemical sensors.

We simulate and demonstrate experimentally an inner-wall grating double slot micro ring resonator (IG-DSMRR) with a center slot ring radius of only 6.72 µm based on the silicon-on-insulator platform. This novel photonic-integrated sensor for optical label-free biochemical analysis boosts the measured refractive index (RI) sensitivity in glucose solutions to 563 nm/RIU with the limit of detection value being 3.7 × 10-6 RIU (refractive index units). The concentration sensitivity for sodium chloride solutions can reach 981 pm/%, with a minimum concentration detection limit of 0.02%. Using the combination of DSMRR and IG, the detection range is enlarged significantly to 72.62 nm, three times the free spectral range of conventional slot micro ring resonators. The measured Q-factor is 1.6 × 104, and the straight strip and double slot waveguide transmission losses are 0.9 dB/cm and 20.2 dB/cm, respectively. This IG-DSMRR combines the advantages of a micro ring resonator, slot waveguide, and angular grating and is highly desirable for biochemical sensing in liquids and gases offering an ultra-high sensitivity and ultra-large measurement range. This is the first report of a fabricated and measured double-slot micro ring resonator with an inner sidewall grating structure.

Asymmetric parameter enhancement in the split-ring cavity array for virus-like particle sensing.

Quantitative detection of virus-like particles under a low concentration is of vital importance for early infection diagnosis and water pollution analysis. In this paper, a novel virus detection method is proposed using indirect polarization parametric imaging method combined with a plasmonic split-ring nanocavity array coated with an Au film and a quantitative algorithm is implemented based on the extended Laplace operator. The attachment of viruses to the split-ring cavity breaks the structural symmetry, and such asymmetry can be enhanced by depositing a thin gold film on the sample, which allows an asymmetrical plasmon mode with a large shift of resonance peak generated under transverse polarization. Correspondingly, the far-field scattering state distribution encoded by the attached virus exhibits a specific asymmetric pattern that is highly correlated to the structural feature of the virus. By utilizing the parametric image sinδ to collect information on the spatial photon state distribution and far-field asymmetry with a sub-wavelength resolution, the appearance of viruses can be detected. To further reduce the background noise and enhance the asymmetric signals, an extended Laplace operator method which divides the detection area into topological units and then calculates the asymmetric parameter is applied, enabling easier determination of virus appearance. Experimental results show that the developed method can provide a detection limit as low as 56 vp/150µL on a large scale, which has great potential in early virus screening and other applications.

From picture to 3D hologram: end-to-end learning of real-time 3D photorealistic hologram generation from 2D image input.

In this Letter, we demonstrate a deep-learning-based method capable of synthesizing a photorealistic 3D hologram in real-time directly from the input of a single 2D image. We design a fully automatic pipeline to create large-scale datasets by converting any collection of real-life images into pairs of 2D images and corresponding 3D holograms and train our convolutional neural network (CNN) end-to-end in a supervised way. Our method is extremely computation-efficient and memory-efficient for 3D hologram generation merely from the knowledge of on-hand 2D image content. We experimentally demonstrate speckle-free and photorealistic holographic 3D displays from a variety of scene images, opening up a way of creating real-time 3D holography from everyday pictures.

Stepped-height ridge waveguide MQW polarization mode converter monolithically integrated with sidewall grating DFB laser.

We report, to the best of our knowledge, the first demonstration of a 1555-nm stepped-height ridge waveguide polarization mode converter monolithically integrated with a sidewall grating distributed-feedback (DFB) laser using the identical epitaxial layer scheme. The device shows stable single longitudinal mode (SLM) operation with the output light converted from TE to TM polarization with an efficiency of >94% over a wide range of DFB injection currents (IDFB) from 140 mA to 190 mA. The highest TM mode purity of 98.2% was obtained at IDFB = 180 mA. A particular advantage of this device is that only a single step of metalorganic vapor-phase epitaxy and two steps of III-V material dry etching are required for the whole integrated device fabrication, significantly reducing complexity and cost.

Integrated system for rapid enrichment and detection of airborne polycyclic aromatic hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs) are extremely toxic environmental pollutants, which are harmful to the human body. Direct collection and analysis of airborne PAHs is essential for air quality monitoring. Herein, we demonstrated an integrated system for airborne PAHs enrichment and detection. The enrichment cube was composed of channels with threaded structures and curved channels, which had high capture efficiency. Then PAHs-carried particles could be crushed into the detection chip for testing. The whole process took about 25 min (5 min for PAHs enrichment and 20 min for PAHs test). The limit of detection was 3.3 ng/m3, which could meet the needs of daily analysis. It had the advantages of low cost, low reagent consumption, simple operation, semi-automatic operation, high sensitivity, high speed and high throughput compared with conventional techniques, showing the potential for becoming an air pollution monitoring platform.

A 3D-Printed Standardized Modular Microfluidic System for Droplet Generation.

Droplet-based microfluidics has a variety of applications, such as material synthesis and single-cell analysis. In this paper, we propose a modular microfluidic system using projection micro-stereolithography three-dimensional (3D) printing technology for droplet generation. All modules are designed using a standard cubic structure with a specific leakage-free connection interface. Versatile droplets, including single droplets, alternating droplets, merged droplets, and Janus particles, have been successfully produced. The droplet size and the generation rate can be flexibly controlled by adjusting the flow rates. The influence of the flow rate fraction between the discrete phase and the continuous phase over the generation of the alternating and merged droplets is discussed. Furthermore, the 'UV curing' module can be employed to solidify the generated droplets to avoid coalescence and fix the status of the Janus particles. The proposed modular droplet generators are promising candidates for various chemical and biological applications, such as single-cell incubation, screening of protein crystallization conditions, synthesis of nanoparticles, and gene delivery. In addition, we envision that more functional modules, e.g., valve, microreactor, and detection modules, could be developed, and the 3D standardized modular microfluidics could be further applied to other complex systems, i.e., concentration gradient generators and clinical diagnostic systems.

Co-optimization method to improve lateral resolution in photoacoustic computed tomography.

In biomedical imaging, photoacoustic computed tomography (PACT) has recently gained increased interest as this imaging technique has good optical contrast and depth of acoustic penetration. However, a spinning blur will be introduced during the image reconstruction process due to the limited size of the ultrasonic transducers (UT) and a discontinuous measurement process. In this study, a damping UT and adaptive back-projection co-optimization (CODA) method is developed to improve the lateral spatial resolution of PACT. In our PACT system, a damping aperture UT controls the size of the receiving area, which suppresses image blur at the signal acquisition stage. Then, an innovative adaptive back-projection algorithm is developed, which corrects the undesirable artifacts. The proposed method was evaluated using agar phantom and ex-vivo experiments. The results show that the CODA method can effectively compensate for the spinning blur and eliminate unwanted artifacts in PACT. The proposed method can significantly improve the lateral spatial resolution and image quality of reconstructed images, making it more appealing for wider clinical applications of PACT as a novel, cost-effective modality.

Gold-viral particle identification by deep learning in wide-field photon scattering parametric images.

The ability to identify virus particles is important for research and clinical applications. Because of the optical diffraction limit, conventional optical microscopes are generally not suitable for virus particle detection, and higher resolution instruments such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM) are required. In this paper, we propose a new method for identifying virus particles based on polarization parametric indirect microscopic imaging (PIMI) and deep learning techniques. By introducing an abrupt change of refractivity at the virus particle using antibody-conjugated gold nanoparticles (AuNPs), the strength of the photon scattering signal can be magnified. After acquiring the PIMI images, a deep learning method was applied to identify discriminating features and classify the virus particles, using electron microscopy (EM) images as the ground truth. Experimental results confirm that gold-virus particles can be identified in PIMI images with a high level of confidence.

DFB laser array based on four phase-shifted sampled Bragg gratings with precise wavelength control.

A four-laser array based on sampled Bragg grating distributed feedback (DFB) lasers in which each sampled period contains four phase-shift sections is proposed, fabricated, and experimentally demonstrated. The wavelength spacing between adjacent lasers is accurately controlled to 0.8 nm ± 0.026 nm and the lasers have single mode suppression ratios larger than 50 dB. Using an integrated semiconductor optical amplifier, the output power can reach 33 mW and the optical linewidth of the DFB lasers can be as narrow as 64 kHz. This laser array uses a ridge waveguide with sidewall gratings and needs only one metalorganic vapor-phase epitaxy (MOVPE) step and one III-V material etching process, simplifying the whole device fabrication process, and meeting the requirements of dense wavelength division multiplexing systems.

Quantitative analysis of errors caused by vibration on polarization parametric indirect microscopic imaging system.

Vibrations cause many problems such as displacement, distortion, and defocusing in microscopic imaging systems. Because vibration errors are random in direction, amplitude, and frequency, it is not known which aspect of the image quality will be affected by these problems and to what extent. Polarization parametric indirect microscopic imaging (PIMI) is a technique that records polarization parameters in a conventional wide-field reflection microscope using polarization modulation of the illumination beam and additional data analysis of the raw images. This indirect imaging technique allows the spatial resolution of the system to be improved. Here, the influence of vibration on the image sharpness and spatial resolution of a PIMI system is analyzed theoretically and experimentally. Degradation in the sharpness of PIMI images is quantified by means of the modulation transfer function and deterioration in the effective spatial resolution by the Fourier ring correlation. These results show that the quality of PIMI images can be improved significantly using vibration isolation.

Characterization of deep sub-wavelength nanowells by imaging the photon state scattering spectra.

Optical-matter interactions and photon scattering in a sub-wavelength space are of great interest in many applications, such as nanopore-based gene sequencing and molecule characterization. Previous studies show that spatial distribution features of the scattering photon states are highly sensitive to the dielectric and structural properties of the nanopore array and matter contained on or within them, as a result of the complex optical-matter interaction in a confined system. In this paper, we report a method for shape characterization of subwavelength nanowells using photon state spatial distribution spectra in the scattering near field. Far-field parametric images of the near-field optical scattering from sub-wavelength nanowell arrays on a SiN substrate were obtained experimentally. Finite-difference time-domain simulations were used to interpret the experimental results. The rich features of the parametric images originating from the interaction of the photons and the nanowells were analyzed to recover the size of the nanowells. Experiments on nanoholes modified with Shp2 proteins were also performed. Results show that the scattering distribution of modified nanoholes exhibits significant differences compared to empty nanoholes. This work highlights the potential of utilizing the photon status scattering of nanowells for molecular characterization or other virus detection applications.