ABSTRACT
Protein glycosylation is a common post-translational modification on extracellular proteins. The conformational dynamics of several glycoproteins have been characterized by hydrogen/deuterium exchange mass spectrometry (HDX-MS). However, it is, in most cases, not possible to extract information about glycan conformation and dynamics due to the general difficulty of separating the deuterium content of the glycan from that of the peptide (in particular, for O-linked glycans). Here, we investigate whether the fragmentation of protonated glycopeptides by collision-induced dissociation (CID) can be used to determine the solution-specific deuterium content of the glycan. Central to this concept is that glycopeptides can undergo a facile loss of glycans upon CID, thereby allowing for the determination of their masses. However, an essential prerequisite is that hydrogen and deuterium (H/D) scrambling can be kept in check. Therefore, we have measured the degree of scrambling upon glycosidic bond cleavage in glycopeptides that differ in the conformational flexibility of their backbone and glycosylation pattern. Our results show that complete scrambling precedes the glycosidic bond cleavage in normal glycopeptides derived from a glycoprotein; i.e., all labile hydrogens have undergone positional randomization prior to loss of the glycan. In contrast, the glycosidic bond cleavage occurs without any scrambling in the glycopeptide antibiotic vancomycin, reflecting that the glycan cannot interact with the peptide moiety due to a conformationally restricted backbone as revealed by molecular dynamics simulations. Scrambling is also inhibited, albeit to a lesser degree, in the conformationally restricted glycopeptides ristocetin and its pseudoaglycone, demonstrating that scrambling depends on an intricate interplay between the flexibility and proximity of the glycan and the peptide backbone.
Subject(s)
Glycopeptides , Hydrogen , Glycopeptides/chemistry , Deuterium , Peptides/chemistry , Glycoproteins/chemistry , Polysaccharides/chemistryABSTRACT
Oncogenic activation of fibroblast growth factor receptor 2 (FGFR2) drives multiple cancers and represents a broad therapeutic opportunity, yet selective targeting of FGFR2 has not been achieved. Although the clinical efficacy of pan-FGFR inhibitors (pan-FGFRi) validates FGFR2 driver status in FGFR2 fusion-positive intrahepatic cholangiocarcinoma, their benefit is limited by incomplete target coverage due to FGFR1- and FGFR4-mediated toxicities (hyperphosphatemia and diarrhea, respectively) and the emergence of FGFR2 resistance mutations. RLY-4008 is a highly selective, irreversible FGFR2 inhibitor designed to overcome these limitations. In vitro, RLY-4008 demonstrates >250- and >5,000-fold selectivity over FGFR1 and FGFR4, respectively, and targets primary alterations and resistance mutations. In vivo, RLY-4008 induces regression in multiple xenograft models-including models with FGFR2 resistance mutations that drive clinical progression on current pan-FGFRi-while sparing FGFR1 and FGFR4. In early clinical testing, RLY-4008 induced responses without clinically significant off-isoform FGFR toxicities, confirming the broad therapeutic potential of selective FGFR2 targeting. SIGNIFICANCE: Patients with FGFR2-driven cancers derive limited benefit from pan-FGFRi due to multiple FGFR1-4-mediated toxicities and acquired FGFR2 resistance mutations. RLY-4008 is a highly selective FGFR2 inhibitor that targets primary alterations and resistance mutations and induces tumor regression while sparing other FGFRs, suggesting it may have broad therapeutic potential. See related commentary by Tripathi et al., p. 1964. This article is featured in Selected Articles from This Issue, p. 1949.
Subject(s)
Bile Duct Neoplasms , Cholangiocarcinoma , Humans , Receptor, Fibroblast Growth Factor, Type 2/genetics , Mutation , Cholangiocarcinoma/genetics , Bile Duct Neoplasms/drug therapy , Bile Ducts, Intrahepatic/metabolism , Protein Kinase Inhibitors/therapeutic useABSTRACT
Extracellular vesicles (EVs) are an important intercellular communication system facilitating the transfer of macromolecules between cells. Delivery of exogenous cargo tethered to the EV surface or packaged inside the lumen are key strategies for generating therapeutic EVs. We identified two "scaffold" proteins, PTGFRN and BASP1, that are preferentially sorted into EVs and enable high-density surface display and luminal loading of a wide range of molecules, including cytokines, antibody fragments, RNA binding proteins, vaccine antigens, Cas9, and members of the TNF superfamily. Molecules were loaded into EVs at high density and exhibited potent in vitro activity when fused to full-length or truncated forms of PTGFRN or BASP1. Furthermore, these engineered EVs retained pharmacodynamic activity in a variety of animal models. This engineering platform provides a simple approach to functionalize EVs with topologically diverse macromolecules and represents a significant advance toward unlocking the therapeutic potential of EVs.
Subject(s)
Extracellular Vesicles/transplantation , Membrane Proteins/metabolism , Neoplasm Proteins/metabolism , Nerve Tissue Proteins/metabolism , Proteins/administration & dosage , Repressor Proteins/metabolism , Animals , Cell Communication , Drug Delivery Systems , Extracellular Vesicles/genetics , Extracellular Vesicles/metabolism , Female , HEK293 Cells , Humans , Membrane Proteins/genetics , Mice , Neoplasm Proteins/genetics , Nerve Tissue Proteins/genetics , Repressor Proteins/geneticsABSTRACT
Hydrogen deuterium exchange mass spectrometry (HDX-MS) is a powerful biophysical technique being increasingly applied to a wide variety of problems. As the HDX-MS community continues to grow, adoption of best practices in data collection, analysis, presentation and interpretation will greatly enhance the accessibility of this technique to nonspecialists. Here we provide recommendations arising from community discussions emerging out of the first International Conference on Hydrogen-Exchange Mass Spectrometry (IC-HDX; 2017). It is meant to represent both a consensus viewpoint and an opportunity to stimulate further additions and refinements as the field advances.
Subject(s)
Deuterium Exchange Measurement/methods , Mass Spectrometry/methods , Data Analysis , Hydrogen-Ion ConcentrationABSTRACT
Monoclonal antibodies (mAbs) are the fastest growing class of biopharmaceuticals. The specific therapeutic tasks vary among different mAbs, which may include neutralization of soluble targets, activation of cytotoxic pathways, targeted drug delivery, and diagnostic imaging. The specific therapeutic goal defines which interactions of the antibody with its multiple physiological partners are most critical for function, and which ones are irrelevant or indeed detrimental. In this work, we explored the ability of the glycan chains to affect IgG1 interaction with two key receptor families, FcRn and γ-type Fc receptors, as well as the influence of glycan composition on the conformation and stability of the antibody molecule. Three different glycan-modified forms of IgG1 (fully deglycosylated, hypergalactosylated and hypersialylated) were produced and characterized alongside the unmodified mAb molecule. Biophysical measurements did not reveal any changes that would be indicative of alterations in the higher order structure or increased aggregation propensity for any of the three glycoforms compared to the unmodified mAb, although the CH2 domain was shown to have reduced thermal stability in the fully deglycosylated form. No significant changes were observed for the hypergalactosylated and hypersialylated forms of IgG1 with regards to binding to FcRn, FcγRIIA and FcγRIIIA, suggesting that neither half-life in circulation nor their ability to induce an immune response are likely to be affected by these modifications of the glycan chains. In contrast, no measurable binding was observed for the deglycosylated form of IgG1 with either FcγRIIA or FcγRIIIA, although this form of the antibody retained the ability to associate with FcRn. These highly specific patterns of attenuation of Fc receptor recognition can be exploited in the future for therapeutic purposes.
Subject(s)
Immunoglobulin G/analysis , Immunoglobulin G/chemistry , Polysaccharides/analysis , Polysaccharides/chemistry , Animals , Biochemical Phenomena , Biophysical Phenomena , CHO Cells , Cricetinae , Cricetulus , Glycosylation , Humans , Protein Structure, Secondary , Protein Structure, TertiaryABSTRACT
The binding of human IgG1 to human Fc gamma receptors (hFcγRs) is highly sensitive to the presence of a single N-linked glycosylation site at asparagine 297 of the Fc, with deglycosylation resulting in a complete loss of hFcγR binding. Previously, we demonstrated that aglycosylated human IgG1 Fc variants can engage the human FcγRII class of the low-affinity hFcγRs, demonstrating that N-linked glycosylation of the Fc is not a strict requirement for hFcγR engagement. In the present study, we demonstrate that aglycosylated IgG variants can be engineered to productively engage with FcγRIIIA, as well as the human Fc gamma RII subset. We also assess the biophysical properties and serum half-life of the aglycosylated IgG variants to measure stability. Aglycosylated constructs N297D/S298T (DTT)-K326I/A327Y/L328G (IYG) and N297D/S298A-IYG optimally drove tumor cell phagocytosis. A mathematical model of phagocytosis suggests that hFcγRI and hFcγRIIIA dimers were the main drivers of phagocytosis. In vivo tumor control of B16F10 lung metastases further confirmed the variant DTT-IYG to be the best at restoring wild-type-like properties in prevention of lung metastases. While deuterium incorporation was similar across most of the protein, several peptides within the CH2 domain of DTT-IYG showed differential deuterium uptake in the peptide region of the FG loop as compared to the aglycosylated N297Q. Thus, in this study, we have found an aglycosylated variant that may effectively substitute for wild-type Fc. These aglycosylated variants have the potential to allow therapeutic antibodies to be produced in virtually any expression system and still maintain effector function.
Subject(s)
Glycosylation , Immunoglobulin G/metabolism , Immunologic Factors/metabolism , Protein Engineering , Receptors, IgG/metabolism , Recombinant Proteins/metabolism , Animals , Biophysical Phenomena , Cell Line, Tumor , Disease Models, Animal , Half-Life , Humans , Immunoglobulin G/genetics , Immunologic Factors/genetics , Immunologic Factors/pharmacokinetics , Lung Neoplasms/prevention & control , Lung Neoplasms/secondary , Mice , Models, Theoretical , Neoplasm Metastasis/prevention & control , Phagocytosis , Protein Binding , Recombinant Proteins/genetics , Recombinant Proteins/pharmacokineticsABSTRACT
Introduction of a chemical change to one or more amino acids in a protein's polypeptide chain can result in various effects on its higher-order structure (HOS) and biophysical behavior (or properties). These effects range from no detectable change to significant structural or conformational alteration that can greatly affect the protein's biophysical properties and its resulting biological function. The ability to reliably detect the absence or presence of such changes is essential to understanding the structure-function relationship in a protein and in the successful commercial development of protein-based drugs (biopharmaceuticals). In this paper, we focus our attention on the latter by specifically elucidating the impact of oxidation on the HOS, structural dynamics, and biophysical properties of interferon beta-1a (IFNß-1a). Oxidation is a common biochemical modification that occurs in many biopharmaceuticals, specifically in two naturally-occurring sulfur-containing amino acids, methionine and cysteine. To carry out this work, we used combinations of hydrogen peroxide and pH to differentially oxidize IFNß-1a (to focus on only methionine oxidation versus methionine and cysteine oxidation). We then employed several analytical and biophysical techniques to acquire information about the differential impact of these two oxidation scenarios on IFNß-1a. In particular, the use of MS-based techniques, especially HDX-MS, play a dominant role in revealing the differential effects. Graphical Abstract á .
Subject(s)
Adjuvants, Immunologic/chemistry , Antiviral Agents/chemistry , Cysteine/chemistry , Interferon beta-1a/chemistry , Methionine/chemistry , Animals , CHO Cells , Chromatography, High Pressure Liquid , Cricetulus , Humans , Hydrogen Peroxide/chemistry , Hydrogen-Ion Concentration , Mass Spectrometry , Models, Molecular , Oxidation-Reduction , Peptide Mapping , Protein ConformationABSTRACT
Characterization of the higher order structure (HOS) of protein-based biopharmaceutical products is an important aspect of their development. Opinions vary about how best to apply biophysical methods, in which contexts to use these methods, and how to use the resulting data to make technical decisions as drug candidates are commercialized [Gabrielson JP, Weiss WF IV. J Pharm Sci. 2015;104(4):1240-1245]. The aim of this commentary is to provide guidance for the development and implementation of a robust and comprehensive HOS characterization strategy. We first consider important concepts involved in developing a strategy that is appropriately suited to a particular biologic, and then discuss ways industry can partner with academia, technology companies, government laboratories, and regulatory agencies to improve the consistency with which HOS characterization is applied across the biopharmaceutical industry.
Subject(s)
Biological Products/chemistry , Decision Making , Drug Industry/methods , Statistics as Topic/methods , Technology, Pharmaceutical/methods , Animals , Drug Discovery/methods , Drug Discovery/trends , Drug Industry/trends , Humans , Structure-Activity Relationship , Technology, Pharmaceutical/trendsABSTRACT
Hydrogen deuterium exchange coupled to mass spectrometry (HDX-MS) has become an established method for analysis of protein higher order structure. Here, we use HDX-MS methodology based on manual solid-phase extraction (SPE) to allow fast and simplified conformational analysis of proteins under pharmaceutically relevant formulation conditions. Of significant practical utility, the methodology allows global HDX-MS analyses to be performed without refrigeration or external cooling of the setup. In mode 1, we used dimethyl sulphoxide-containing solvents for SPE, allowing the HDX-MS analysis to be performed at acceptable back-exchange levels (<30%) without the need for cooling any components of the setup. In mode 2, SPE and chromatography were performed using fast isocratic elution at 0°C resulting in a back-exchange of 10%-30%. Real-world applicability was demonstrated by HDX-MS analyses of interferon-ß-1a in formulation, using an internal HDX reference peptide (P7I) to control for any sample-to-sample variations in back-exchange. Advantages of the methodology include low sample use, optimized excipient removal using multiple solvents, and fast data acquisition. Our results indicate that HDX-MS can provide a reliable approach for fast conformation analysis of proteins in their intended formulations, which could facilitate an increased use of the technique in pharmaceutical development research.
Subject(s)
Angiotensin II/analysis , Deuterium Exchange Measurement/methods , Insulin/analysis , Interferon beta-1a/analysis , Angiotensin II/chemistry , Animals , CHO Cells , Cricetinae , Cricetulus , Dimethyl Sulfoxide/chemistry , Humans , Insulin/chemistry , Interferon beta-1a/chemistry , Protein Conformation , Solid Phase Extraction/methods , Time FactorsABSTRACT
Characterization of immunoglobulin solutions at high concentrations represents a significant challenge. A current trend in the biopharmaceutical industry is to manufacture highly concentrated drug products, which can be used to deliver high doses in small volumes, via subcutaneous injections. Studying a molecule's structure and properties in its final drug product formulation is ideal, but characterization is typically performed under dilute solution conditions with critical stabilizing buffer components removed because of interference effects, which can result in an incomplete understanding of the molecule's properties. Direct study of protein conformation and protein-protein interactions in concentrated solutions is challenging for most biophysical and biochemical techniques; however, X-ray solution scattering offers opportunities. Combined with other biophysical techniques, X-ray scattering has the potential to provide relevant information on both structure and interactions in protein solutions over a broad concentration range. Here, we report X-ray solution scattering of 4 monoclonal antibodies, designated mAb1 (glycosylated and de-glycosylated), mAb2, and mAb3 at concentrations between 0.5 and >168 mg/mL. Data acquired from these measurements are combined with the results from other biophysical measurements to generate a comprehensive profile of their solution behaviors. Our results show that X-ray solution scattering can assess key parameters needed to aid in formulation development.
Subject(s)
Antibodies, Monoclonal/chemistry , Scattering, Small Angle , X-Ray Diffraction/methods , Animals , Antibodies, Monoclonal/analysis , Biopharmaceutics/methods , CHO Cells , Cricetinae , Cricetulus , Immunoglobulins/analysis , Immunoglobulins/chemistry , Protein Interaction Domains and MotifsABSTRACT
When highly concentrated, an antibody solution can exhibit unusual behaviors, which can lead to unwanted properties, such as increased levels of protein aggregation and unusually high viscosity. Molecular modeling, along with many indirect biophysical measurements, has suggested that the cause for these phenomena can be due to short range electrostatic and/or hydrophobic protein-protein interactions. Hydrogen/deuterium exchange mass spectrometry (HDX-MS) is a useful tool for investigating protein conformation, dynamics, and interactions. However, "traditional" continuous dilution labeling HDX-MS experiments have limited utility for the direct analysis of solutions with high concentrations of protein. Here, we present a dialysis-based HDX-MS (di-HDX-MS) method as an alternative HDX-MS labeling format, which takes advantage of passive dialysis rather than the classic dilution workflow. We applied this approach to a highly concentrated antibody solution without dilution or significant sample manipulation, prior to analysis. Such a method could pave the way for a deeper understanding of the unusual behavior of proteins at high concentrations, which is highly relevant for development of biopharmaceuticals in industry. Graphical Abstract á .
Subject(s)
Antibodies, Monoclonal/chemistry , Deuterium Exchange Measurement/instrumentation , Dialysis/instrumentation , Mass Spectrometry/instrumentation , Animals , CHO Cells , Cricetulus , Equipment Design , Models, Molecular , Protein Conformation , SolutionsABSTRACT
PURPOSE: Oligosaccharides play diverse and unpredictable functional roles when attached to proteins and are a largely unexplored scaffold for deconstructing and attributing novel functions to proteins during drug development. Here, the glycoprotein Artemin (ART) was carefully assessed by multiple analytical methods that allow us to provide a comprehensive understanding of how N-linked glycosylation impact the structural and functional properties of ART. METHODS: Modification of the N-linked glycan of ART was performed by incubation with various enzymes. Biological assays and systems were used to examine the relative activity and pharmacokinetic properties of ART as a function of glycosylation. In order to reveal the conformational impact of glycosylation on ART, hydrogen/deuterium exchange mass spectrometry (HDX-MS) was employed in addition to differential scanning calorimetry. The colloidal stability of ART glycovariants was assessed by dynamic light scattering, viscometry, and solubility assays. RESULTS: No difference in pharmacokinetics or relative potency was revealed between glycosylated and nonglycosylated ART. Surprisingly, the HDX-MS data indicated that the glycan does not greatly influence the conformation and dynamics of the protein. In contrast, differences in thermal and colloidal stability clearly revealed a role of glycosylation in increasing the solubility and stability of ART. CONCLUSIONS: Our findings demonstrate how careful analysis using multiple advanced techniques can be used to identify and dissect the multiple potential functions of protein glycosylation and form a prerequisite for glycoengineering and drug development of glycoproteins.
Subject(s)
Nerve Tissue Proteins/chemistry , Protein Processing, Post-Translational , Animals , Colloids , Drug Stability , Dynamic Light Scattering , Glycosylation , Injections, Intravenous , Male , Models, Molecular , Nerve Tissue Proteins/administration & dosage , Nerve Tissue Proteins/pharmacokinetics , Protein Conformation , Protein Stability , Rats, Sprague-Dawley , Recombinant Proteins/chemistry , Solubility , Structure-Activity Relationship , Temperature , ViscosityABSTRACT
The evaluation of stability with respect to particles in prefilled syringes is complicated by the presence of silicone oil. The mobility, colloidal characteristics, and kinetic instability of silicone oil in contact with a protein formulation may be influenced in unpredictable ways by pharmaceutical variables, storage, and handling conditions. To provide insight into the impact of these variables on silicone oil originating specifically from the siliconized prefillable syringe (PFS), a series of studies were conducted at incremental syringe barrel siliconization levels. Size-exclusion chromatography and particle counting methods were used to quantitate soluble aggregates and submicron and subvisible particles in peginterferon beta-1a in a PFS siliconized with a fixed nozzle spray-on siliconization process. The effect of silicone oil on the peginterferon beta-1a molecule was examined under pharmaceutically relevant conditions, accelerated degradation, and under denaturing conditions. Resonant mass measurement was used to discriminate silicone oil from protein particles establishing that silicone oil does not mask adverse trends in non-silicone oil particles. The peginterferon beta-1a molecule was shown to be stable in the presence of silicone oil and robust with respect to the formation of soluble aggregates and submicron and subvisible particles in its PFS siliconized over the range of 0-1.2 mg silicone oil per syringe barrel.
Subject(s)
Interferon-beta/chemistry , Polyethylene Glycols/chemistry , Protein Aggregates , Silicone Oils/chemistry , Syringes/standards , Chromatography, Gel , Drug Stability , Particle Size , SolubilityABSTRACT
Protein self-association or aggregation is a property of significant concern for biopharmaceutical products due to the potential ability of aggregates to cause adverse toxicological and immunological effects. Thus, during the development of a protein biopharmaceutical, it is important to detect and quantify the level and nature of aggregate species as early as possible in order to make well-informed decisions and to mitigate and control potential risks. Although a deeper understanding of the mechanism of aggregation (i.e., protein-protein interactions) is desirable, such detailed assessment is not always necessary from a biopharmaceutical process development point of view. In fact, the scope of characterization efforts is often focused on achieving a well-controlled process, which generates a product that reliably meets established acceptance criteria for safety and efficacy. In this brief note, we evaluated the utility of size-exclusion chromatography, dynamic light scattering, and analytical ultracentrifugation in their simplest forms, to effectively reveal and confirm the presence of concentration-dependent reversible self-association (RSA) in a monoclonal antibody in the early stages of formulation development. Using these techniques, we also initiated preliminary work aimed at reducing the occurrence of this RSA behavior by varying the pH of the formulation buffer.
Subject(s)
Antibodies, Monoclonal/chemistry , Immunoglobulin G/chemistry , Protein Aggregates , Dynamic Light Scattering/methods , Particle Size , Ultracentrifugation/methodsABSTRACT
To determine how structural changes in antibodies are connected with aggregation, the structural areas of an antibody prone to and/or impacted by aggregation must be identified. In this work, the higher-order structure and biophysical properties of two different monoclonal antibody (mAb) monomers were compared with their simplest aggregated form, that is, dimers that naturally occurred during normal production and storage conditions. A combination of hydrogen/deuterium exchange mass spectrometry and other biophysical measurements was used to make the comparison. The results show that the dimerization process for one of the mAb monomers (mAb1) displayed no differences in its deuterium uptake between monomer and dimer forms. However, the other mAb monomer (mAb2) showed subtle changes in hydrogen/deuterium exchange as compared with its dimer form. In this case, differences observed were located in specific functional regions of the CH 2 domain and the hinge region between CH 1 and CH 2 domains. The importance and the implications of these changes on the antibody structure and mechanism of aggregation are discussed.
Subject(s)
Antibodies, Monoclonal/chemistry , Animals , CHO Cells , Calorimetry, Differential Scanning , Cricetulus , Disulfides/analysis , Electrophoresis, Polyacrylamide Gel , Mass Spectrometry , Models, Molecular , Protein Conformation , Protein Multimerization , Protein Stability , Scattering, Small Angle , X-Ray DiffractionABSTRACT
Understanding the conformation of antibodies, especially those of therapeutic value, is of great interest. Many of the current analytical methods used to probe protein conformation face issues in the analysis of antibodies, either due to the nature of the antibody itself or due to the limitations of the method. One method that has recently been utilized for conformational analysis of antibodies is hydrogen/deuterium exchange mass spectrometry (H/DX MS). H/DX MS can be used to probe the conformation and dynamics of proteins in solution, requires small sample quantities, is compatible with many buffer systems, and provides peptide-level resolution. The application of H/DX MS to immunoglobulin gamma 1 (IgG1) recombinant monoclonal antibodies can provide information about IgG1 conformation, dynamics, and changes to conformation as a result of protein modification(s), changes in storage conditions, purification procedures, formulation, and many other parameters. In this article we provide a comprehensive H/DX MS protocol for the analysis of an antibody.
Subject(s)
Antibodies, Monoclonal/chemistry , Immunoglobulin G/chemistry , Antibodies, Monoclonal/isolation & purification , Chromatography, Liquid , Deuterium Exchange Measurement/methods , Humans , Immunoglobulin G/isolation & purification , Molecular Weight , Protein Conformation , Recombinant Proteins/chemistry , Recombinant Proteins/isolation & purification , Reference Standards , Spectrometry, Mass, Electrospray Ionization/methods , Spectrometry, Mass, Electrospray Ionization/standards , Tandem Mass Spectrometry/methods , Tandem Mass Spectrometry/standardsABSTRACT
A long lasting recombinant factor IX -Fc fusion protein (rFIX-Fc) is being developed for the treatment of hemophilia B and is currently in late stage clinical investigation. By limiting injection frequency and maintaining efficacy, rFIX-Fc shows promise as a new therapeutic option for hemophilia B patients. However, before gaining regulatory approval, rFIX-Fc must undergo rigorous analytical and biological testing, in addition to clinical trials. Included in this testing is the need to understand this protein's higher-order structure and dynamics. In this study, we investigated and compared the biophysical properties of rFIX-Fc, rFIX, and Fc using hydrogen/deuterium exchange mass spectrometry and differential scanning calorimetry. Within the limits of these techniques, our results show that structural comparability exists between rFIX and the FIX region of rFIX-Fc. In addition, changes in the structure and dynamics of both proteins, in response to calcium binding, a requirement for FIX function, are also highly comparable. In the case of Fc and Fc region of rFIX-Fc, conformational comparability is also established. These biophysical results further support the conclusion that fusing an immunoglobulin gamma 1 Fc to rFIX does not significantly alter the higher-order structure of FIX or Fc, Ca binding to FIX, or Fc functionality.
Subject(s)
Calcium/chemistry , Factor IX/chemistry , Immunoglobulin Fc Fragments/chemistry , Calorimetry, Differential Scanning , Mass Spectrometry , Protein ConformationABSTRACT
The structural features of the asymmetric activated states of the insulin receptor family are still poorly understood. We investigated hydrogen/deuterium (H/D)-exchange within the extracellular domain of the type-I insulin-like growth factor receptor (IGF-1R) in the absence and presence of IGF-1 (active state) and in the presence of antibody inhibitors (inactive state). Near complete coverage of the 210 kDa receptor sequence was obtained by mass mapping of proteolytically derived peptides at all H/D-exchange time points. The data provide details regarding solvent exposure and dynamics across the extracellular region as well as conformational changes induced by activation or inactivation. Multiple peptides, distant in structure, individually demonstrated two distinct H/D-exchange rates, suggesting that each of these peptides exists in two separate environments in IGF-1R. The dual-exchange behavior of these peptides was enhanced on ligand binding and eliminated on inhibitor binding, clearly associating these regions with active state asymmetry and enabling them to serve as reporters of receptor activity.
Subject(s)
Deuterium Exchange Measurement , Peptide Mapping , Receptor, IGF Type 1/chemistry , Antibodies, Monoclonal/chemistry , Humans , Insulin-Like Growth Factor I/chemistry , Molecular Weight , Peptide Fragments/chemistry , Protein Binding , Protein Conformation , Protein Structure, Tertiary , Receptor, IGF Type 1/antagonists & inhibitors , Receptor, IGF Type 1/isolation & purification , Surface PropertiesABSTRACT
The function, efficacy, and safety of protein biopharmaceuticals are tied to their three-dimensional structure. The analysis and verification of this higher-order structure are critical in demonstrating manufacturing consistency and in establishing the absence of structural changes in response to changes in production. It is, therefore, essential to have reliable, high-resolution and high sensitivity biophysical tools capable of interrogating protein structure and conformation. Here, we demonstrate the use of hydrogen/deuterium exchange mass spectrometry (H/DX-MS) in biopharmaceutical comparability studies. H/DX-MS measurements can be conducted with good precision, consume only picomoles of protein, interrogate nearly the entire molecule with peptide level resolution, and can be completed in a few days. Structural comparability or lack of comparability was monitored for different preparations of interferon-ß-1a. We present specific graphical formats for the display of H/DX-MS data that aid in rapidly making both the qualitative (visual) and quantitative assessment of comparability. H/DX-MS is capable of making significant contributions in biopharmaceutical characterization by providing more informative and confidant comparability assessments of protein higher-order structures than are currently available within the biopharmaceutical industry.
Subject(s)
Biopharmaceutics/methods , Deuterium Exchange Measurement , Mass Spectrometry , Proteins/chemistry , Technology, Pharmaceutical/methods , Biopharmaceutics/standards , Interferons/chemistry , Models, Molecular , Protein Conformation , Technology, Pharmaceutical/standardsABSTRACT
Protein trisulfide linkages are generated by the post-translational insertion of a sulfur atom into a disulfide bond. Molecular heterogeneity was detected in a recombinant IgG(1) monoclonal antibody (mAb) and attributed to the presence of a protein trisulfide moiety. The predominant site of trisulfide modification was the bond between the heavy and light chains. The trisulfide was eliminated during purification of the IgG(1) mAb via a cysteine wash step incorporated into Protein A affinity column chromatography. Analysis of the cysteine-treated mAb by electrophoresis and peptide mapping indicated that the trisulfide linkages were efficiently converted to intact disulfide bonds (13% trisulfide decreased consistently to 1% or less) without disulfide scrambling or an increase in free sulfhydryls. The on-column trisulfide conversion caused no change in protein folding detectable by hydrogen/deuterium exchange or differential scanning calorimetry. Consistent with this, binding of the mAb to its antigen in vitro was insensitive to the presence of the trisulfide modification and to its removal by the on-column cysteine treatment. Similar, high efficiency trisulfide conversion was achieved for a second IgG(1) mAb using the column wash strategy (at least 7% trisulfide decreased to 1% or less). Therefore, trisulfide/disulfide heterogeneity can be eliminated from IgG(1) molecules via a convenient and inexpensive procedure compatible with routine Protein A affinity capture.