Rapid diagnosis of drug agglomeration and crystallinity in pharmaceutical preparations by electrospray laser desorption ionization mass spectrometry imaging.

In this study we evaluate the applicability of electrospray laser desorption ionization mass spectrometry imaging (ELDI-MSI) to interrogate tablet formulations for the spatial distributions of ingredients. Tablet formulations with varying amounts of crystalline acetaminophen (the active pharmaceutical ingredient, API) were analyzed to determine if crystallinity could be evaluated via ELDI-MSI. ELDI-MSI concurrently imaged the (API, binders, and surfactants. The spatial distributions of amorphous API were very similar to that of the surfactants and different from that of crystalline API. The higher the crystallinity in the tablet formulation, the more agglomeration of the active ingredient was observed by ELDI-MSI. This study shows the capability of ELDI-MSI to diagnose agglomeration and crystallinity content in pharmaceutical preparations with little to no sample preparation. The ability to concurrently image APIs with other components provides valuable information as to their form in the tablet.

Giant magnetic anisotropy and tunnelling of the magnetization in Li2(Li(1-x)Fe(x))N.

Large magnetic anisotropy and coercivity are key properties of functional magnetic materials and are generally associated with rare earth elements. Here we show an extreme, uniaxial magnetic anisotropy and the emergence of magnetic hysteresis in Li2(Li(1-x)Fe(x))N. An extrapolated, magnetic anisotropy field of 220 T and a coercivity field of over 11 T at 2 K outperform all known hard ferromagnets and single-molecular magnets. Steps in the hysteresis loops and relaxation phenomena in striking similarity to single-molecular magnets are particularly pronounced for x≪1 and indicate the presence of nanoscale magnetic centres. Quantum tunnelling, in the form of temperature-independent relaxation and coercivity, deviation from Arrhenius behaviour and blocking of the relaxation, dominates the magnetic properties up to 10 K. The simple crystal structure, the availability of large single crystals and the ability to vary the Fe concentration make Li2(Li(1-x)Fe(x))N an ideal model system to study macroscopic quantum effects at elevated temperatures and also a basis for novel functional magnetic materials.

Effects of ion/ion proton transfer reactions on conformation of gas-phase cytochrome c ions.

Positive ions from cytochrome c are studied in a 3-D ion trap/ion mobility (IM)/quadrupole-time-of-flight (TOF) instrument with three independent ion sources. The IM separation allows measurement of the cross section of the ions. Ion/ion reactions in the 3-D ion trap that remove protons cause the cytochrome c ions to refold gently without other degradation of protein structure, i.e., fragmentation or loss of heme group or metal ion. The conformation(s) of the product ions generated by ion/ion reactions in a given charge state are similar regardless of whether the cytochrome c ions are originally in +8 or +9 charge states. In the lower charge states (+1 to +5) cytochrome c ions made by the ion/ion reaction yield a single IM peak with cross section of approximately 1110 to 1180 A(2), even if the original +8 ion started with multiple conformations. The conformation expands slightly when the charge state is reduced from +5 to +1. For product ions in the +6 to +8 charge states, ions created from higher charge states (+9 to +16) by ion/ion reaction produce more compact conformation(s) in somewhat higher abundances compared with those produced directly by the electrospray ionization (ESI) source. For ions in intermediate charge states that have a variety of resolvable conformers, the voltage used to inject the ions into the drift tube, and the voltage and duration of the pulse that extracts ions from the ion trap, can affect the observed abundances of various conformers.

Atmospheric pressure laser desorption/ionization of plant metabolites and plant tissue using colloidal graphite.

Colloidal graphite is a promising matrix for atmospheric pressure laser desorption/ionization mass spectrometry. Intact [M+H](+) and [M-H](-) ions are readily produced from a wide range of small molecule plant metabolites, particularly anthocyanins, fatty acids, lipids, glycerides, and ceramides. Compared with a more traditional organic acid matrix, colloidal graphite provides more efficient ionization for small hydrophobic molecules and has a much cleaner background spectrum, especially in negative ion mode. Some important metabolites, e.g., fatty acids and glycosylated flavonoids, can be observed from Arabidopsis thaliana leaf and flower petal tissues in situ.

An ion trap-ion mobility-time of flight mass spectrometer with three ion sources for ion/ion reactions.

This instrument combines the capabilities of ion/ion reactions with ion mobility (IM) and time-of-flight (TOF) measurements for conformation studies and top-down analysis of large biomolecules. Ubiquitin ions from either of two electrospray ionization (ESI) sources are stored in a three dimensional (3D) ion trap (IT) and reacted with negative ions from atmospheric sampling glow discharge ionization (ASGDI). The proton transfer reaction products are then separated by IM and analyzed via a TOF mass analyzer. In this way, ubiquitin +7 ions are converted to lower charge states down to +1; the ions in lower charge states tend to be in compact conformations with cross sections down to approximately 880 A(2). The duration and magnitude of the ion ejection pulse on the IT exit and the entrance voltage on the IM drift tube can affect the measured distribution of conformers for ubiquitin +7 and +6. Alternatively, protein ions are fragmented by collision-induced dissociation (CID) in the IT, followed by ion/ion reactions to reduce the charge states of the CID product ions, thus simplifying assignment of charge states and fragments using the mobility-resolved tandem mass spectrum. Instrument characteristics and the use of a new ion trap controller and software modifications to control the entire instrument are described.

Reduction of matrix effects in inductively coupled plasma mass spectrometry by flow injection with an unshielded torch.

Solution samples with matrix concentrations above approximately 0.1% generally present difficulties for analysis by inductively coupled plasma mass spectrometry (ICP-MS) because of cone clogging and matrix effects. Flow injection (FI) is coupled to ICP-MS to reduce deposition from samples such as 1% sodium salts (as NaCl) and seawater (approximately 3% dissolved salts). Surprisingly, matrix effects are also less severe during flow injection, at least for some matrix elements on the particular instrument used. Sodium chloride at 1% Na and undiluted seawater cause only 2 to 29% losses of signal for typical analyte elements. A heavy matrix element (Bi) at 0.1% also induces only approximately 14% loss of analyte signal. However, barium causes a much worse matrix effect, that is, approximately 90% signal loss at 5000 ppm Na. Also, matrix effects during FI are much more severe when a grounded metal shield is inserted between the load coil and the torch, which is the most common mode of operation for the particular ICP-MS device used.

A linear ion trap mass spectrometer with versatile control and data acquisition for ion/ion reactions.

A linear ion trap (LIT) with electrospray ionization (ESI) for top-down protein analysis has been constructed. An independent atmospheric sampling glow discharge ionization (ASGDI) source produces reagent ions for ion/ion reactions. The device is also meant to enable a wide variety of ion/ion reaction studies. To reduce the instrument's complexity and make it available for wide dissemination, only a few simple electronics components were custom built. The instrument functions as both a reaction vessel for gas-phase ion/ion reactions and a mass spectrometer using mass-selective axial ejection. Initial results demonstrate trapping efficiency of 70% to 90% and the ability to perform proton transfer reactions on intact protein ions, including dual polarity storage reactions, transmission mode reactions, and ion parking.

Theoretical investigation of small polyatomic ions observed in inductively coupled plasma mass spectrometry: H(x)CO+ and H(x)N2(+) (x = 1, 2, 3).

Two series of small polyatomic ions, HxCO+ and HxN2(+) (x = 1, 2, 3), were systematically characterized using three correlated theoretical techniques: density functional theory using the B3LYP functional, spin-restricted second-order perturbation theory, and singles + doubles coupled cluster theory with perturbative triples. On the basis of thermodynamic data, the existence of these ions in inductively coupled plasma mass spectrometry (ICP-MS) experiments is not surprising since the ions are predicted to be considerably more stable than their corresponding dissociation products (by 30-170 kcal/mol). While each pair of isoelectronic ions exhibit very similar thermodynamic and kinetic characteristics, there are significant differences within each series. While the mechanism for dissociation of the larger ions occurs through hydrogen abstraction, the triatomic ions (HCO+ and HN2(+)) appear to dissociate by proton abstraction. These differing mechanisms help to explain large differences in the abundances of HN2(+) and HCO+ observed in ICP-MS experiments.

Analysis of glass fragments by laser ablation-inductively coupled plasma-mass spectrometry and principal component analysis.

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) is used to differentiate glass samples with similar optical and physical properties based on trace elemental composition. Laser ablation increases the number of elements that can be used for differentiation by eliminating problems commonly associated with dissolution and contamination. In this study, standard residential window and tempered glass samples that could not be differentiated by refractive index or density were successfully differentiated by LA-ICP-MS. The primary analysis approach used is Principal Component Analysis (PCA) of the complete mass spectrum. PCA, a multivariate analysis technique, provides rapid analysis of samples without time-consuming pair-wise comparison of calibrated analyses or prior knowledge of the elements present in the samples. Probabilities for positive association of the individual samples are derived from PCA. Utilization of the Q-statistic with PCA allowed us to distinguish all samples within the set to a certainty greater than the 99% confidence interval.

Urinary metal and polycyclic aromatic hydrocarbon biomarkers in boilermakers exposed to metal fume and residual oil fly ash.

BACKGROUND: Boilermakers are occupationally exposed to known carcinogens. METHODS: The association of urinary 1-hydroxy-pyrene (1-OHP), a biomarker of polycyclic aromatic hydrocarbon (PAH) exposure, with biomarkers of metal exposure (vanadium, chromium, manganese, nickel, copper, and lead) in boilermakers exposed to metal fume from welding and dust particulates from residual oil fly ash (ROFA) was examined. A repeated measures cohort study was conducted during the overhaul of an oil-fired boiler. Twice-daily urine samples were obtained for 5 days and analyzed for cotinine, 1-OHP, and metals. Generalized estimating equations (GEE) were used to model the multivariate relationship of 1-OHP to the explanatory variables. RESULTS: Metal and 1-OHP levels were determined for 165 urine samples from 20 boilermakers and these levels increased during the workweek. However, the 1-OHP level was not significantly associated with any individual metal level at any time point. CONCLUSION: This suggests that boilermakers were occupationally exposed to PAH and metals, but 1-OHP as a PAH biomarker was unable to serve as a surrogate marker of metal exposure for the metals measured in this study.

Behavior of bacteria in the inductively coupled plasma: atomization and production of atomic ions for mass spectrometry.

The combination of perfusion chromatography (PC) and inductively coupled plasma mass spectrometry (ICPMS) is a fast, general way to monitor metal incorporation into bacteria. U+ signals from U incorporated intrinsically in Bacillus subtilis (B. subtilis) are measured with 4 ms time resolution to investigate the behavior of individual cells in the ICP. When intact B. subtilis cells are introduced directly into the ICP, occasional U+ spikes are observed. The positive U+ spikes suggest that bacteria behave more like solid particles than wet droplets in the ICP, compared to previous studies of such transient effects in the ICP. Drying the bacterial aerosol does not eliminate the spikes. Lysing the bacteria by sonication increases the U+ response by 30% compared to that from the untreated sample. PC results from a 10 ppb U standard, partially lysed and fully lysed bacteria samples show that the intracellular U-bound species are released by sonication and are small in size. The atomization-ionization efficiencies for different elements (U, Ca, and Mg) from cells differ somewhat. Reducing the aerosol gas flow rate by 0.1 L min-1 improves the relative U+ response for unlysed bacteria to 85% of that for lysed cells, although the absolute U+ signal is attenuated greatly.

Controlled dissolution for elemental analysis of sample layers by inductively coupled plasma-mass spectrometry: a feasibility study.

Aqueous acid mixtures at room temperature are used to partially dissolve steel samples. The dissolved elements are washed off the surface, diluted, and then determined by inductively coupled plasma-mass spectrometry (ICP-MS) using a magnetic sector mass analyzer. The amount of material removed is measured from the amount of Fe dissolved and increases linearly with HNO(3) concentration in the etch acid. Analyte concentrations in the solid are determined from the signal ratio of analyte ion/Fe(+). The shape of a plot of mass of element removed vs. nitric acid concentration yields information about the efficiency of the removal process and the likely chemical form of the element in the sample. For elements like Mn, Al, and W in steel, these plots have the same linear shape as that for the major element (Fe), and the measured concentrations agree well with the certified values. For problem elements like Nb and Ta, the plots have two linear regions with different slopes, and measured concentrations are lower than the certified values. Laser ablation ICP-MS and scanning electron microscopy (SEM) measurements show these elements to be associated together in the solid in refractory grains that are not dissolved to the same extent as the Fe matrix. For steel, the amount of Fe dissolved corresponds to an average depth of at least 4 microm, or 20 000 atomic layers.

Multivariate pattern matching of trace elements in solids by laser ablation inductively coupled plasma-mass spectrometry: source attribution and preliminary diagnosis of fractionation.

Laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) is used with two variations of principal components analysis (PCA) for objective, routine comparisons of forensic materials without time-consuming and destructive sample dissolution. The relative concentrations of trace elements in a solid sample are examined to provide a "fingerprint" composition that can be used for identification and source matching of the material. Residue samples are matched to bulk materials using PCA. Variation of laser focus and PCA are also used to diagnose the severity of elemental fractionation in two metal samples that are prone to fractionation, brass and steel. Such fractionation remains the most significant limitation for accurate quantitative analyses by LA-ICPMS.

Pore exclusion chromatography-inductively coupled plasma-mass spectrometry for monitoring elements in bacteria: a study on microbial removal of uranium from aqueous solution.

The interstitial spaces between spherical particles in a packed column can act as a sieve that passes microorganisms below a certain size. If the bed is a perfusion-type material (containing a binary distribution of large and small pores), colloidal-size microorganisms are subject only to pore exclusion, while all molecules are subject to size exclusion among the various pores. Thus, microorganisms elute first, followed by macromolecules, and then small molecules. Coupling this separation method to an ICP magnetic sector mass spectrometer provides a sensitive, direct means to study the microbial uptake of heavy metals (i.e., uranium) from their surrounding environments. Multiple metal ions can be monitored in the microorganism and in the surrounding solution. In this way, definitive information can be provided for the remediation of radioactive waste sites. The effect of uranium on microbial growth is also discussed.

Association of expired nitric oxide with urinary metal concentrations in boilermakers exposed to residual oil fly ash.

BACKGROUND: Exposure to metal-containing particulate matter has been associated with adverse pulmonary responses. Metals in particulate matter are soluble, hence are readily recovered in urine of exposed individuals. This study investigated the association between urinary metal concentrations and the fractional concentration of expired nitric oxide (F(E)NO) in boilermakers (N = 32) exposed to residual oil fly ash (ROFA). METHODS: Subjects were monitored at a boiler overhaul site located in the New England area, USA. F(E)NO and urine samples were collected pre- and post-workshift for 5 consecutive workdays. Metals investigated included vanadium (V), chromium (Cr), manganese (Mn), nickel (Ni), copper (Cu), and lead (Pb). RESULTS: The median F(E)NO was 7.5 ppb (95% CI: 7.4-8.0), and the median creatinine-adjusted urinary metal concentrations (mug/g creatinine) were: vanadium, 1.37; chromium, 0.48; manganese, 0.30; nickel, 1.52; copper, 3.70; and lead, 2.32. Linear mixed-effects models indicated significant inverse exposure-response relationships between log F(E)NO and the log-transformed urinary concentrations of vanadium, manganese, nickel, copper, and lead at several lag times, after adjusting for smoking status. CONCLUSIONS: Urine samples may be utilized as a biomarker of occupational metal exposure. The inverse association between F(E)NO and urinary metal concentrations suggests that exposure to metals in particulate matter may have an adverse effect on respiratory health.

Tandem mass spectrometry of metal nitrate negative ions produced by electrospray ionization.

M(NO(3))(x)(-) ions are generated by electrospray ionization (ESI) of metal solutions in nitric acid in negative ion mode. Collision-induced reactions of these ions are monitored in a tandem mass spectrometer (MS) of quadrupole-octopole-quadrupole (QoQ) geometry. For Group 1 and 2 elements, the M(NO(3))(x)(-) ions dissociate into NO(3)(-) and neutral metal nitrate molecules. These elements also form some M(x)(NO(3))x+1- clusters, especially Li(+). Metal nitrate ions from transition elements and Group 13 elements fragment into oxo products and also undergo internal electron transfer to leave the M atom in a lower oxidation state. To calibrate the collision energy, the dissociation energy of O-NO(2)(-) is found to be 5.55 eV, about 0.76 eV lower than a value derived from thermochemistry. The product ions from Fe(NO(3))(4)(-) ions have low formation thresholds of only 0.5 to 2 eV.

Determination of carbon isotope ratios in amino acids, proteins, and oligosaccharides by inductively coupled plasma-mass spectrometry.

Carbon isotope ratios ((12)C/(13)C) are measured for aqueous solutions of tryptophan, myoglobin, and beta-cyclodextrin using C(+) ions from an inductively coupled plasma (ICP) and a prototype twin quadrupole mass spectrometer (MS). (13)C/(12)C ratios can be determined with a relative standard deviation (RSD) of approximately 1%. This precision is close to the limiting value predicted by counting statistics (1.16%). Spectral interference on (13)C(+), presumably from (12)C(1)H(+), comes from the incomplete dissociation of myoglobin and/or beta-cyclodextrin, but not tryptophan. Decreasing the aerosol gas flow rate slightly from that which yields maximum signal eliminates this (12)C(1)H(+) interference. The count rate of the minor isotope ((13)C(+)) can be artificially enhanced by increasing the voltage of the (13)C(+) detector, and/or by shifting the ion beam splitter offset from the central axis. Instrumental modifications to the MS that improve the sensitivity are also described.

Combinatorial screening of heterogeneous catalysis in selective oxidation of naphthalene by laser-induced fluorescence imaging.

Heterogeneous catalysis is one of the most important processes in the petroleum and the chemical industries. To be able to screen catalysts at high throughput will dramatically improve performance and reduce costs. Here we used laser-induced fluorescence imaging as a high-throughput screening technique in the combinatorial discovery of active catalysts for naphthalene oxidation. Binary catalysts of V-Mo-O, V-Sn-O, V-Ti-O, and V-W-O in various 15-member libraries were screened. Laser ablation ICPMS was employed to confirm the composition of the individual catalysts in the combinatorial library. The addition of MoO3, WO3, SnO2, and TiO2 to V2O5 did not improve the catalytic activity in the conversion of naphthalene to naphthoquinone, but the overall activity was found to increase for certain binary samples. The screening of ternary catalysts of V-Sn-Mo-O revealed that the combination of V (45%)-Sn (45%)-Mo (10%) gave 70% higher catalytic activity than pure V2O5 in converting naphthalene to naphthoquinone. Reaction temperature and sample preparation effects on the activity and selectivity of catalysts are also studied in a combinatorial manner.

Measurement of trace elements in proteins extracted from liver by size exclusion chromatography-inductively coupled plasma-mass spectrometry with a magnetic sector mass spectrometer.

Proteins are extracted from liver into aqueous buffer at pH 7 and separated by size exclusion chromatography (SEC). Inductively coupled plasma mass spectrometry (ICP-MS) with a magnetic sector mass spectrometer is used to identify those protein fractions that contain Cu, Zn, Mn, Fe, Cd, S, P, Mo, Co, Ca, or Mg. The experimental setup provides very high sensitivity. Measurements at medium spectral resolution remove polyatomic interferences for some difficult elements like Fe, S, and P. Some elements are found in different molecular weight proteins; for example, cadmium binds to four different protein fractions (>400 kDa, 70 kDa, and metallothionein). Other elements like Mo, Ca, and Mg are present only in low-molecular-weight proteins or other small molecules.

Speciation of trace elements in proteins in human and bovine serum by size exclusion chromatography and inductively coupled plasma-mass spectrometry with a magnetic sector mass spectrometer.

Proteins are separated by size exclusion chromatography while atomic ions from the inorganic elements are detected on-line by inductively coupled plasma-mass spectrometry. A double focusing mass analyzer provides very high sensitivity, low background, and sufficient spectral resolution to separate the atomic ions of interest from most polyatomic ions at the same nominal m/z value. The chromatograms show the distribution of the elements of interest between protein-bound and free fractions and provide the approximate molecular weights of those protein fractions that contain the elements monitored. The distribution of various elements, including V, Mo, Fe, Co, Mn, and lanthanides, in human or bovine serum samples are shown. Alkali metals and Tl are present primarily as free metal ions and are not bound to proteins. Inorganic elements spiked into the serum samples can be followed into various proteins. EDTA does not remove Fe, Pb, Sn, or Th from the proteins but does extract Mn from some proteins. Procedures for determining the effects of breaking disulfide linkages on the metal binding characteristics of proteins are also described.