Highly reflective silver mirror enhanced by several dielectric films prepared under the low substrate temperature.

Optical paths in telescopes frequently incorporate silver mirrors for high sensitivity. Unfortunately, silver mirrors without protective coatings are susceptible to sulfurization and oxidation, compromising their quality. Even with protective layers, insufficient adhesion between the coating and the silver film can lead to peeling, exposing the silver to external environments and affecting its quality. This study aimed to identify dielectric materials with superior adhesion to silver, rendering them ideal choices for silver coating applications. By electron gun evaporation, different dielectric layers were deposited on the top and bottom of the silver film under a substrate temperature below 150 °C. These coatings were composed of materials with desired refractive indices, including aluminum oxide (Al2O3), aluminum-doped silicon, magnesium fluoride (MgF2), and other dielectrics. Following the deposition, a tape adhesion test was conducted to evaluate the bond strength of the samples. X-ray photoelectron spectroscopy (XPS) analysis was carried out to investigate the interaction between silver and its neighboring layers. The results revealed that Al2O3 and MgF2 exhibited exceptional adhesion to silver. Moreover, these multilayer coatings can effectively enhance the reflectance of silver in the visible (VIS) wavelength ranges.

Highly Reflective Silver-Enhanced Coating with High Adhesion and Sulfurization Resistance for Telescopes.

Highly reflective metal coatings are essential for manufacturing reflecting telescope mirrors to achieve the highest reflectivity with broad spectral bandwidth. Among metallic materials, enhanced silver-based coatings can provide higher reflectivity in the 400-500 nm spectral range to better performance from visible to near IR. Moreover, over-coating a dielectric protective layer on the mirror's front side attains additional hardness and oxidation stability. In this paper, we study a combination of thermal and electron beam evaporation as a technology to form protected enhanced high reflective Ag coatings. A newly designed multiplayer film can pass ASTM 5B adhesive performance testing and give sulfurization inhibition. The average specular reflectivity for the enhancement coating is about 98% in wavelengths across the spectral range from 400-1000 nm. This innovation has been demonstrated on a Newtonian type telescope, with storage in an ambiance humidity H = 60-85%, and temperature T = 10-35 °C, for more than six months without degradation in coating performance.

Solutions of the Multivariate Inverse Frobenius-Perron Problem.

We address the inverse Frobenius-Perron problem: given a prescribed target distribution ρ, find a deterministic map M such that iterations of M tend to ρ in distribution. We show that all solutions may be written in terms of a factorization that combines the forward and inverse Rosenblatt transformations with a uniform map; that is, a map under which the uniform distribution on the d-dimensional hypercube is invariant. Indeed, every solution is equivalent to the choice of a uniform map. We motivate this factorization via one-dimensional examples, and then use the factorization to present solutions in one and two dimensions induced by a range of uniform maps.

Reflective EUVL tool design with generalized Gaussian constant mathematics.

This study aims to develop a systematic design procedure for extreme ultraviolet lithography tools. Through analysis using generalized Gaussian constants, relationships between optical properties and requirements can be obtained, and can be used to help ensure that optical system properties required for the tool are upheld during the design process. As verification of the design method, an eight-mirror 0.4 NA tool design has been demonstrated.

Well-aligned Vertically Oriented ZnO Nanorod Arrays and their Application in Inverted Small Molecule Solar Cells.

This manuscript describes how to design and fabricate efficient inverted solar cells, which are based on a two-dimensional conjugated small molecule (SMPV1) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), by utilizing ZnO nanorods (NRs) grown on a high quality Al-doped ZnO (AZO) seed layer. The inverted SMPV1:PC71BM solar cells with ZnO NRs that grew on both a sputtered and sol-gel processed AZO seed layer are fabricated. Compared with the AZO thin film prepared by the sol-gel method, the sputtered AZO thin film exhibits better crystallization and lower surface roughness, according to X-ray diffraction (XRD) and atomic force microscope (AFM) measurements. The orientation of the ZnO NRs grown on a sputtered AZO seed layer shows better vertical alignment, which is beneficial for the deposition of the subsequent active layer, forming better surface morphologies. Generally, the surface morphology of the active layer mainly dominates the fill factor (FF) of the devices. Consequently, the well-aligned ZnO NRs can be used to improve the carrier collection of the active layer and to increase the FF of the solar cells. Moreover, as an anti-reflection structure, it can also be utilized to enhance the light harvesting of the absorption layer, with the power conversion efficiency (PCE) of solar cells reaching 6.01%, higher than the sol-gel based solar cells with an efficiency of 4.74%.

Enhance the light-harvesting capability of the ITO-free inverted small molecule solar cell by ZnO nanorods.

The ITO-free inverted SMPV1:PC71BM solar cells with an Al doped ZnO (AZO) transparent electrodes are fabricated. The AZO thin film prepared by pulsed laser deposition (PLD) technique exhibits high transmission (>85%) and low sheet resistance (~30 Ω/sq) and the power conversion efficiency (PCE) of devices based on AZO electrode can reach around 4%. To further enhance the light harvesting of the absorption layer of solar cells, ZnO nanorods interlayer is grown on the AZO layer before the deposition the active layer. The absorption spectrums of devices under various conditions are also simulated by RCWA method to identify the optical saturation length of the ZnO nanorods. The PCE of ITO-free inverted small molecule solar cell improved with ZnO nanorods can reach 6.6%.

Laser speckle reduction by phase range limited computer generated hologram in laser projection display system.

The speckle phenomenon is an annoyance in laser projection display systems. We propose a novel speckle suppression method that utilizes the interference concept on a pixel point, which reduces the speckle contrast (SC) of the project image by limiting the phase distribution range in the optical field. The SC formula is derived in the uniform interval phase range for partially developed speckle conditions, showing that the SC can be lowered by lessening the phase range limitation. In the ideal simulation model, the SC can be reduced from 98.77% to 0% as the phase range limitation varies from 2π to 0. The phase range limitation model is a novel method using a computer generated hologram to provide beam shaping and phase limitation. In a more realistic simulation model, the SC is reduced from 99.18% to 16.68%.

Front view and panoramic side view videoscope lens system design.

A novel structure of a rigid panoramic endoscope is designed and presented. The inspected target field is imaged on the sensor by an optical lens with a dynamic mechanical module. A microgear and motor are used to drive the dynamic lens components, and a compensation element is used in the system to correct the aberrations due to the protective cylindrical endoscope cover. A long depth of field navigator lens is attached to image the front side. The design details are presented and results are shown.