Mechanisms of negative differential resistance in glutamine-functionalized WS2quantum dots.

Understanding the mechanism of the negative differential resistance (NDR) in transition metal dichalcogenides is essential for fundamental science and the development of electronic devices. Here, the NDR of the current-voltage characteristics was observed based on the glutamine-functionalized WS2quantum dots (QDs). The NDR effect can be adjusted by varying the applied voltage range, air pressure, surrounding gases, and relative humidity. A peak-to-valley current ratio as high as 6.3 has been achieved at room temperature. Carrier trapping induced by water molecules was suggested to be responsible for the mechanism of the NDR in the glutamine-functionalized WS2QDs. Investigating the NDR of WS2QDs may promote the development of memory applications and emerging devices.

Bright and fast-response perovskite light-emitting diodes with an ICBA:modified-C60 nanocomposite electrical confinement layer.

Bright and fast-response CH3NH3PbBr3 perovskite light-emitting diodes (PeLEDs) are realized by using ICBA:modified C60 (MC60) nanocomposites as the hole blocking layer (HBL) and electron transport layer (ETL). The photoluminescence spectrum shows that the use of hydrophilic MC60 in the ETL helps the surface passivation of the perovskite layer. In addition, the photoelectron spectra and water-droplet contact angle images show that the use of the ICBA:MC60 nanocomposite ETL can simultaneously confine the electrons and holes in the perovskite layer, which boosts the injected electron-hole radiative recombination efficiency and thereby increases the electroluminescence from 1 cd m-2 to 2080 cd m-2 at 6 V when the ICBA:3,5OEC60 nanocomposite ETL is used. In addition, the operational frequency of the optimal PeLED is up to 1.5 MHz.

Lead-free cesium tin halide nanocrystals for light-emitting diodes and color down conversion.

Organometal halide perovskites are attracting a great deal of attention because of their long carrier diffusion lengths, wide wavelength tunability, and narrow-band emission. However, the toxicity of lead has caused considerable environmental and health concerns. In this work, lead-free cesium tin halide nanocrystals are synthesized and investigated. CsSnBr3 and CsSnI3 nanocrystals, 25 and 7 nm in size, are synthesized by a facile hot injection method. Absorption spectroscopy, photoluminescence spectroscopy, and X-ray diffraction were used to understand their structural and optical properties. CsSnBr3 and CsSnI3 nanocrystals show emission peaks at 683 and 938 nm, respectively. These nanocrystals show shelf stability for a few months. Temperature-dependent photoluminescence is utilized to know more about fundamental physical parameters, such as exciton binding energy, charge carrier-phonon interactions and band gap. Light-emitting diodes and color down-conversion films are also demonstrated using these lead free perovskite nanocrystals.

Origins of the s-shape characteristic in J-V curve of inverted-type perovskite solar cells.

Fullerene derivative thin films have been widely used in inverted-type perovskite solar cells as the electron transport layer (ETL) and hole blocking layer. However, the smooth contact at the interface between the hydrophobic [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and hydrophilic CH3NH3PbI3 (MAPbI3) thin film has not yet been completely understood. The contact at the PCBM/MAPbI3 interface strongly influences the photovoltaic performance. The photovoltaic devices were characterized by measuring the light intensity-dependent current density-voltage (J-V) curves and impedance spectra, which show that the contact at the PCBM/MAPbI3 interface simultaneously influences the shunt resistance (carrier recombination) and series resistance (interfacial contact). In addition, x-ray diffraction patterns, atomic force microscopic images, absorbance spectra and photoluminescence spectra were used to explore the contact at the PCBM/MAPbI3 interface. The experimental results show that the flat MAPbI3 thin film cannot be completely covered by a PCBM thin film and thereby results in the s-shape characteristic in the J-V curve of the resultant solar cells. The s-shaped J-V curve can be suppressed by increasing the crystallinity and surface roughness of the MAPbI3 thin film. With the use of an interface modification layer in between the PCBM thin film and Ag cathode, the power conversion efficiency of MAPbI3 solar cells can be increased from 10.50% to 13.71%.

Ultrastable, Deformable, and Stretchable Luminescent Organic-Inorganic Perovskite Nanocrystal-Polymer Composites for 3D Printing and White Light-Emitting Diodes.

Organic-inorganic perovskite nanocrystals with excellent optoelectronic properties have been utilized in various applications, despite their stability issues. The perovskite materials are sensitive to environments such as polar solvents, moisture, and heat. Thus, they are not used for extrusion three-dimensional (3D) printing, as it is usually conducted in the ambient environment and requires heating to liquefy the printed materials. In this work, 11 thermoplastic polymers conventionally used for extrusion 3D printing were investigated to test their capability as protective encapsulation materials for perovskite nanocrystals. Three of them exhibited good protective properties, and one (polycaprolactone, PCL) of these three could be blended with perovskite nanocrystals to form perovskite nanocrystal-PCL composites, which were deformable and stretchable once heated. Because of the low melting point of PCL, the perovskite nanocrystals maintained their optical properties after 3D printing, and the printed objects were still having fluorescent behavior. Moreover, fluorescent micrometer-sized fibers based on the perovskite nanocrystal-PCL composites could also be simply prepared using cotton candy makers. Perovskite nanocrystal-PCL composite films with different emission wavelengths were incorporated with blue light-emitting diodes (LEDs) to realize white LEDs with Commission Internationale de l'Éclairage chromaticity coordinates of (0.33, 0.33).

Application of the Transtheoretical Model to Exercise Behavior and Physical Activity in Patients after Open Heart Surgery.

PURPOSE: To assess exercise behavior and physical activity levels after open heart surgery. METHODS: This prospective cohort study included 130 patients (70.8% male, aged 61.0 ± 12.2 years, 53.8% coronary bypass grafting) who underwent open heart surgery. The exercise behavior and physical activity of these patients were assessed at the 3- and 6-month follow-up appointments. Additional interviews were also conducted to further assess exercise behavior. Physical activity duration and metabolic equivalents were calculated from self-reported questionnaire responses. Moreover, possible related demographic factors, clinical features, participation in cardiac rehabilitation programs, and physical activity levels were additionally evaluated. RESULTS: Six months after hospital discharge, most patients were in the action (39.2%) and maintenance (37.7%) stages. Other subjects were in the precontemplation (11.5%), contemplation (5.4%), and preparation (6.2%) stages. The average physical activity level was 332.6 ± 377.1 min/week and 1198.1 ± 1396.9 KJ/week. Subjects in the action and maintenance stages exercised an average of 399.4 ± 397.6 min/week, significantly longer than those in other stages (116.2 ± 176.2 min/week, p = 0.02). Subjects that participated in outpatient cardiac rehabilitation programs after discharge may have the better exercise habit. Gender had no significant effect on exercise behavior 6 months after hospital discharge. CONCLUSIONS: Most subjects following open heart surgery may maintain regular exercise behavior at 6 months after hospital discharge. Physical activity levels sufficient for cardiac health were achieved by subjects in the active and maintenance stages. Outpatient cardiac rehabilitation programs are valuable for encouraging exercise behavior after heart surgery. KEY WORDS: Exercise behavior; Open heart surgery; Physical activity; Transtheoretical model.

The interplay of mutations and electronic properties in disease-related genes.

Electronic properties of DNA are believed to play a crucial role in many phenomena in living organisms, for example the location of DNA lesions by base excision repair (BER) glycosylases and the regulation of tumor-suppressor genes such as p53 by detection of oxidative damage. However, the reproducible measurement and modelling of charge migration through DNA molecules at the nanometer scale remains a challenging and controversial subject even after more than a decade of intense efforts. Here we show, by analysing 162 disease-related genes from a variety of medical databases with a total of almost 20,000 observed pathogenic mutations, a significant difference in the electronic properties of the population of observed mutations compared to the set of all possible mutations. Our results have implications for the role of the electronic properties of DNA in cellular processes, and hint at the possibility of prediction, early diagnosis and detection of mutation hotspots.

Impaired exercise capacity in diabetic patients after coronary bypass surgery: effects of diastolic and endothelial function.

OBJECTIVES: The aims of this study were to clarify the influence of cardiac diastolic and peripheral vascular function on the exercise capacity of patients with coronary bypass surgery (CABG) and diabetes mellitus (DM) by tissue Doppler imaging (TDI) and flow-mediated vasodilatation (FMD), and to investigate interrelations between exercise capacity and LV diastolic function, endothelial function and biochemical parameters. METHODS: We analyzed the exercise capacity, TDI at the mitral annulus and FMD in 51 uncomplicated first-time CABG survivors (23 DM) at an average interval of 21.6 +/- 12.2 months after surgery. RESULTS: Diabetics had lower E', A', VO(2)peak, (a-v)O(2) difference, and higher E/E' ratios (p < 0.05) than non-DM patients, but not FMD (p = 0.17). The A and E/E' ratios correlated negatively with VO(2)peak after age adjustment (r = -0.336, p = 0.024). In addition, HbA(1c), and triglyceride also correlated negatively with VO(2)peak (r = -0.377, -0.307, respectively, p < 0.05). CONCLUSIONS: Diabetics after CABG had more advanced diastolic dysfunction and oxygen extraction impairment than non-DM. It suggests these factors could contribute to lower exercise capacity, risk of developing heart failure despite preserved systolic function and poorer long-term survival of diabetic patients after CABG.