Water Leaching Kinetics of Boron from the Alkali-Activated Ludwigite Ore.

The primary aim of this study was to investigate the boron leaching process from alkali-activated ludwigite ore. Initially, the ore underwent activation through roasting at 1050 °C for 60 min with 20% sodium carbonate. Subsequently, the study examined the influence of leaching parameters, including temperature, time, liquid-to-solid ratio, and particle size, using the activated ore as the raw material. Additionally, water leaching characteristics of the residues and boron kinetics were analyzed. The results demonstrated that boron leaching efficiency reached 93.71% from the reduced ludwigite ore under specific conditions: leaching temperature of 180 °C, leaching time of 6 h, liquid-to-solid ratio of 8:1, and feed particle size of 52.31 µm (average particle size). Leach residue characteristics indicated the dissolution of minerals during the process. The boron behavior during water leaching followed the Avrami Equation, and the kinetics equation was derived by fitting the leaching data. Moreover, the activation energy (Ea) value for boron leaching was determined to be 8.812 kJ·mol-1 using the Arrhenius Equation, indicating that the leaching process is controlled by diffusion.

Fabrication of a large computer-generated hologram with high diffraction efficiency and high accuracy by scanning homogenization etching.

The diffraction efficiency, defined as the ratio of diffracted power to incident power, is one of the key working indicators for a computer-generated hologram (CGH). The CGH with high diffraction efficiency could suppress stray light and eliminate ghost images, thus improving interferometric performance in aspherical testing of low-reflectivity or large off-axis distance surfaces. However, the high-efficiency CGH is hard to precisely fabricate by traditional reactive ion etching and focusing ion beam, because it requires high etching depth with a high uniformity and sub-nanometric roughness in the glass, especially in the fabrication of a large CGH with an aperture of up to 300 mm. In this study, fabrication of the above-mentioned CGH was demonstrated via what we believe to be a new method called scanning homogenization etching (SHE), in which the ion source with a Gaussian energy distribution accurately scans the glass surface to realize homogenization etching. Different from controlling dwell time at each etching point, this paper proposes to control the scanning rate to achieve not only uniform but also quantitative depth removal in a single scan. Moreover, the depth errors in deep etching across the whole glass surface can be remarkably reduced due to homogenization effects introduced by multiple scanning etching. Finally, the target etching depth of 692.3 nm with an etching uniformity of 2.2% in the etching of a 300 mm CGH was achieved. The roughness of the etched and unetched area both have Ra values of 0.3 nm. The diffraction efficiency of working order is 39.998%, achieving 98.6% of the theoretical diffraction efficiency. In addition, the SHE is not limited by the aperture of the ion source, so it can achieve even larger diffractive optical elements with high diffraction efficiency and high accuracy.

Preparation of chitosan mesoporous membrane/halloysite composite for efficiently selective adsorption of Al(III) from rare earth ions solution through constructing pore structure on substrate.

The removal of impurity Al(III) from rare earth ion solution by selective adsorption method was one of the challenging tasks. Herein, calcination and acid dissolution treatment were used to construct the pore structure for the halloysite substrate (Hal-650-H) and provide conditions for the formation of the chitosan mesoporous membrane to prepare composite (Hal-H-2CS). The selective adsorption properties and mechanism of the Hal-H-2CS for Al(III) in the rare earth ion solution were studied. The results showed that the formation of mesoporous structures for chitosan provided abundant sites for the adsorption of Al(III). Hal-H-2CS showed remarkable selective adsorption properties for Al(III) in a wide pH range and the binary mixtures with high content of Al(III) or La(III). The maximum adsorption capacity of Al(III) was 106 mg/g, while the adsorption capacity of La(III) was only 1.41 mg/g at pH 4.0. In addition, the Hal-H-2CS exhibited excellent regeneration and structural stability. The remarkable selective properties of Hal-H-2CS was achieved by the synergistic effect between chitosan mesoporous membrane and Hal-650-H, the main adsorption sites were the OH, NH2, CONH2 of chitosan and the oxygen sites of the Hal-650-H. This work provides a new strategy for the design and preparation of outstanding selective adsorbent for Al(III).

Elastoplastic contact model of pitch-based rough surface and its polishing characteristics.

Fused silica glass is widely used in optical systems, including astronomical telescopes, laser systems, optical communications, and the semiconductor industry. At the same time, the surface quality of the fused silica directly determines the performance and precision of the system. In order to analyze the microscopic surface interaction based on the basis of tribology, a roughness contact model of pitch and fused silica glass surfaces was established. Analyze the performance parameters of contact materials, surface roughness, and the relationship between load and contact area. Pitch materials with a higher plasticity index have a larger elastoplastic contact area with the fused silica surface during the polishing process. The experimental results demonstrate that the surface quality of the polished fused silica improves as the plasticity index of the pitch material increases. At the same time, judging from the PSD curve results, the polished surface of the No. 55 pitch on the spatial-frequency band curve (100-101/mm) is significantly lower than the other two brands of pitch. Additionally, the Ra value of the workpiece surface roughness reaches 0.091 nm. The results of this study provide important theoretical guidance for achieving full-diameter, full-frequency ultra-smooth polishing of large-diameter complex curved surfaces.

Study on the Thermophysical Properties of 80% 10B Enrichment of B4C.

In this paper, a specific type of Boron Carbide (B4C) with a high enrichment of 80 ± 0.3 at% 10B was prepared as an absorbing material for control rods in nuclear reactors. The enrichment of 10B was achieved using a chemical exchange method, followed by obtaining boron carbide powder through a carbothermal reduction method. Finally, B4C with a high enrichment of 68.3~74.2% theoretical density was obtained using a hot-pressed sintering process. This study focused on investigating the basic out-of-pile thermophysical properties of the high enrichment B4C compared to natural B4C reference pellets under non-irradiated conditions. These properties included the thermal expansion coefficient, thermal conductivity, emissivity, elastic limit, elastic modulus, and Poisson's ratio. The research results indicate that the enriched B4C pellet exhibits good thermal stability and meets the technical requirements for mechanical capability. It was observed that porosity plays a significant role in determining the out-of-pile mechanical capability of B4C, with higher porosity samples having a lower thermal conductivity, elastic-plastic limit, and elastic modulus. In short, all the technical indexes studied meet the requirements of nuclear-grade Boron Carbide pellets for Pressurized Water Reactors.

Transient simulation of SO2 absorption into water in a bubbling reactor.

A bubbling reactor is an important type of gas scrubber to reduce SO2 emissions in maritime shipping. Both experiments and simulations were conducted to study the relationship between the periodic gas bubbling process and SO2 concentration at the outlet of the reactor, and the entrainment of liquid droplets on SO2 absorption. The accuracy of the model was verified by comparing the bubble size, the depth of bubbles injected into the water, and the SO2 concentration obtained in both experiments and simulations. The gas bubbling process is accompanied by bubble formation, rise, and collapse. The gas bubbling period is affected by the disturbance of the liquid level. The period of the SO2 concentration at the outlet of the gas bubbling reactor is smaller than that at the gas jar outlet which acts as the gas buffering region. The amounts of water carried out of the bubbling reactor by the gas bubbling process increase with the gas flow rates. The droplets and liquid film in the gas jar and the connecting tube play an important role in the absorption of SO2. This study encourages more research to reduce the fluctuation of SO2 concentration and consider droplet entrainment in the design of bubbling reactors.

Sirtuin 3 controls cardiac energetics and protects against oxidative stress in electromagnetic radiation-induced cardiomyopathy.

Electromagnetic radiation can cause injuries to both the structures and functions of the heart. No therapy is currently available to inhibit these untoward effects. Mitochondrial energetic damage and oxidative stress are drivers of electromagnetic radiation-induced cardiomyopathy (eRIC); however, the pathways that mediate these events are poorly defined. Sirtuin 3 (SIRT3) has been emerged as a key target for maintaining mitochondrial redox potential and metabolism, but its role in eRIC remains unknown. Here, Sirt3-KO mice and cardiac-specific SIRT3 transgenic mice were subjected to the investigation of eRIC. We found that Sirt3 protein expression level was down-regulated in eRIC mice model. Sirt3-KO markedly exaggerated decreases in cardiac energetics and increases in oxidative stress in microwave irradiation (MWI)-stressed mice. Conversely, cardiac-specific SIRT3 overexpression protected the hearts from these effects and rescued cardiac malfunction. Mechanistically, Sirt3 maintained AMP-activated protein kinase (AMPK) signaling pathway in MWI-stressed hearts in vivo. In conclusion, electromagnetic radiation repressed SIRT3 expression and disturbed cardiac energetics and redox homeostasis. The increased SIRT3 expression and AMPK activation in vivo prevented eRIC, indicating that SIRT3 will be a potential therapeutic target for curative interventions in eRIC.

Study on the Damage Model of Non-Persistent Jointed Rock Mass under the Coupling of Freeze-Thaw and Shear.

Considering that a jointed rock mass in a cold area is often affected by periodic freeze-thaw cycles and shear failure, definitions for the mesoscopic and macroscopic damage to a jointed rock mass under the coupling of freeze-thaw and shear are proposed, and the damage mechanism is verified according to experimental results. The results show that: (1) the jointed rock specimens increase macro-joints and meso-defects, the mechanical properties deteriorate significantly under freeze-thaw cycles, and the damage degree becomes more and more significant with the increases in freeze-thaw cycles and joint persistency. (2) When the number of freeze-thaw cycles is constant, the total damage variable value gradually increases with the increase in joint persistency. The damage variable difference in specimens with different persistency is distinct, which is gradually reduced in the later cycles, indicating a weakening influence of persistency on the total damage variable. (3) The shear resistance of non-persistent jointed rock mass in a cold area is determined by the coupling effect of meso-damage and frost heaving macro-damage. The coupling damage variable can accurately describe the damage variation law of jointed rock mass under freeze-thaw cycles and shear load.

Adsorption of Polyetheramine-230 on Expansive Clay and Structure Properties Investigation.

Polyetheramine (PEA) is a swelling inhibitor used to address engineering challenges arising from the interaction between montmorillonite (Mt) and water. This study comprehensively investigates the adsorption characteristics of PEA on three representative expansive clay samples: Na-Mt, Ca-Mt, and engineered expansive soil. Additionally, the desorption of exchangeable ions is examined. The findings reveal that a two-stage adsorption kinetic model and a pseudo-second-order kinetic model can properly describe the adsorption kinetics of PEA on expansive clays. PEA exhibits a strong capacity for ion exchange with sodium ions, while the exchange capacity for calcium ions is limited. Both protonated and non-protonated PEA contribute to rapid adsorption processes. The adsorption isotherms are well-fitted by the Langmuir and Freundlich models, with the Langmuir model being reasonable. At lower equilibrium concentrations, a higher proportion of the adsorption amount is attributed to ion exchange compared to higher equilibrium concentrations. Ion exchange emerges as the primary factor contributing to the adsorption of PEA on Na-Mt, whereas the adsorption of PEA on Ca-Mt and expansive soil is primarily attributed to physical adsorption by non-protonated PEA. X-ray diffraction results reveal significant intercalation effects of PEA as they penetrate the interlayer space and hinder interlayer ion hydration. Fourier transform infrared spectrum results demonstrate that the adsorption of PEA minimally impacts the framework of Mt structural units but primarily reduces the adsorbed water content. Clay-PEA composites exhibit a decreased affinity for water. Zeta potential experiments indicate that the adsorption of PEA significantly diminishes the surface potential of clay-PEA composite particles, effectively inhibiting their hydration dispersion.

Discontinuous phase unwrapping based on the minimization of Zernike gradient polynomial residual.

In many certain optical metrology cases, the pupil is usually divided into multiple connected domains by secondary mirror spiders, thus producing segment piston errors and leaving a false phase unwrapping result. In this paper, a method based on minimization of Zernike gradient polynomial residual (MZGR) is proposed to estimate segment piston errors and correct erroneous phase unwrapping results. Simulations and experiments demonstrated that this method can obtain the segment piston errors precisely under complex aberration forms and varied obscurations, indicating reliable practicality. Comparison to the 4D commercial solution, the RMS (root-mean-square) of the residual decreased from 0.154 λ to 0.020 λ.

Modeling and suppressing the wavefront degeneration in a CGH interferometric null test.

The computer-generated hologram (CGH) enables the ultra-high accuracy of surface measurement but causes the wavefront degeneration in the optical system. In this article, we give a high-accuracy analytical simulation of the wavefront degeneration in null test by the elliptical Gaussian model. We propose an analytical expression of instrumental transfer function (ITF) for the CGH null test without knowing the phase distribution of CGH, which gives an efficient instruction to suppress the wavefront degeneration. The ITF of the interferometric null test for a ∅3m aspheric mirror can be optimized from 0 to 0.65 at 0.4 Nyquist frequency.

Challenges and strategies in high-accuracy manufacturing of the world's largest SiC aspheric mirror.

In the process of manufacturing the world's largest silicon carbide (SiC) aspheric mirror, the primary difficulties are mirror blank preparation, asphere fabrication, and testing, as well as cladding and coating. Specifically, the challenges include the homogeneity of the complicated structure casting, accuracy and efficiency of the fabrication process, print-through effect, fidelity and precision of test procedure, stress and denseness of cladding process, the dynamic range of interferometric measurement, and air turbulence error due to the long optical path. To break through such a barrier of difficulties, we proposed the water-soluble room temperature vanishing mold and gel casting technology, homogeneous microstructure reaction-formed joint technology, nano-accuracy efficient compound fabrication, gravity unloading technology, high-denseness low-defect physical vapor deposition (PVD) Si-cladding technology, test data fusion method, and time-domain averaging method, etc. Based on the proposed technologies and methods, we have accomplished the world's largest SiC aspheric mirror with a size of ⌀4.03 m. The impressive performance of the SiC aspheric mirror is validated by the characteristics of the fabricated SiC aspheric mirror. The aerial density of the SiC blank is less than 120 kg/m2, surface shape test accuracy is better than 6 nm RMS, thickness inhomogeneity of the cladding layer is less than 5%, and the final surface figure error and roughness are 15.2 nm RMS and 0.8 nm RMS, respectively.

Pose-varied swing arm profilometer test for off-axis aspheric surfaces with strong asphericity.

The swing arm profilometer (SAP) has been widely used to test large aspheric optics by measuring the asphericity from its best-fitting sphere (BFS). To further improve the test accuracy, we propose a pose-varied test mode for the SAP with a shorter-range probe to measure off-axis aspheric surfaces with stronger asphericity. In contrast to the classical SAP mode in which the air-table is fixed in a stationary position during measurement, we adjust the pose of each scan arc to match the local BFS and the measurement range of the probe decreases to half that of the global asphericity. To verify the effectiveness, we conduct experiments on an off-axis asphere with a diameter of 3 and 2 m. Compared with a classical SAP mode, it achieved an improved performance of 50% higher repeatability and 32% higher accuracy.

Stress-induced deformation of the coating on large lightweight freeform optics.

Large aperture, lightweight optics are frequently utilized in modern optical systems. However, despite the use of advanced techniques for developing their materials, fabrication, and mechanical structure, the coatings placed on the substrates induce slight lattice mismatches and increase the thin film stress on polished surfaces. This significantly distorts nano-accuracy optical surfaces, especially on lightweight freeform surfaces. In this study, we construct a finite element model (FEM) and a ray tracing model to estimate the impact of the stress-induced deformation of the coating on a 1.5m class lightweight silicon carbine (SiC) mirror with a freeform surface. Our simulation results are within 10% deviation from the experimental results, and the deformation texture map matches these results as well. We discuss several possible strategies to overcome stress-induced deformation, including fabrication pre-compensation, lightweight structure redesign, and an inverse print-through effect.

Distribution model of the surface roughness in magnetorheological jet polishing.

Magnetorheological jet polishing (MJP) plays an important role in polishing complex cavities and special optical elements with high precision. However, the roughness distribution function that describes the variation with polishing time of the roughness value of every area in the polishing area has not been studied deeply. In this paper, the influence of the roughness distribution on the removal function of MJP in optics (with a roughness of less than 10 nm) and its evolution model in the spatial and time domains are studied. With the increase of polishing time, the surface roughness of the central area linearly increases, forming surface defects, such as pits. The roughness of the polishing area exhibits a limited growth trend. Verification experiments are carried out on BK7 glass. The results of the roughness distribution on the removal function prove the correctness of the model. The model laid a foundation; therefore, it has important guidance and reference value for the application to the whole aperture polishing.

Study on low-order aberration measurements of large-aperture flats based on scanning pentaprism technology.

Pentaprism scanning technology (PPS) is an absolute testing method that has the advantages of a simple structure and absolute testing without an extra reference flat, as well as being able to provide in situ surface measurements, and more. It plays an important role in the manufacturing process of large flat mirrors. For calibrating the PPS's uncertainty, this paper describes a multi-mode scanning method to implement the measurement of low-order aberrations and introduces the concept of an autocorrelation coefficient to evaluate the data processing progress. These improvements were applied to the measurement of a large flat mirror (1630 mm in diameter), which demonstrates that the measuring uncertainty of PPS can be about 20 nm rms. Furthermore, in regard to the special requirements of M3MP, the prototype mirror of M3M (the tertiary mirror) in the Thirty Meter Telescope project with a non-circular aperture, we analyzed the slope distribution of low-order aberrations, power, and astigmatism. The sample route lines of PPS are then reorganized and a new data process algorithm is implemented. This work was performed in order to improve the PPS's performance in measuring low-order aberrations of large flat mirrors.

Effect of Modified Wuzi Yanzong Pill () on Tip60-Mediated Apoptosis in Testis of Male Rats after Microwave Radiation.

OBJECTIVE: To investigate the effect of a modified Wuzi Yanzong Pill (, WZYZP) on the male rats' testis after microwave radiation, as well as its potential mechanism. METHODS: Forty-five male rats were randomly assigned to three groups: the control group, the radiation group, and the WZYZP group. The rats in the radiation group and WZYZP group were exposed to microwave radiation for 15 min once, while the rats in the control group were not exposed to any radiation. The rats in the WZYZP group were given a modified of WZYZP by gavage daily for 7 days. Apoptosis in the testis was evaluated using terminal-deoxynucleoitidyl transferase mediated nick end labeling (TUNEL) assay. Histopathological alterations of the testis were observed by haematoxylin-eosin (HE) staining. Tat-interactive protein, 60kD (Tip60) and p53 expressions were determined by Western blotting. RESULTS: The apoptosis index (AI) in the radiation group was higher than that of the WZYZP group and control group on day 1 (D1), day 7 (D7) day 14 (D14) after radiation (P<0.05). The seminiferous tubules were of normal morphology in the control group. In the radiation group, the partial seminiferous tubules were collapsed, basement membranes of the seminiferous epithelia became detached. WZYZP could restore the morphological changes. There was no expression of Tip60 among the three groups on D7 and D14. The expression of p53 was higher in the radiation group than in the control group (P<0.05). WZYZP could down-regulate the rising p53 induced by radiation on D7 and D14 (P<0.05). CONCLUSION: A modified WZYZP may affect germ cells, and its protective effects may partly result from its ability to intervene in Tip60 mediated apoptosis.

Multi-beam array stitching method based on scanning Hartmann for imaging quality evaluation of large space telescopes.

To test large-aperture space optical systems in a simple and highly efficient manner, the scanning Hartmann test (SHT) has been used to measure the sub-aperture wavefront slopes of optical systems by scanning with a collimated beam followed by retrieval of the overall wavefront form. However, the use of such a method contains a crucial flaw in that pointing errors of the translation stage can severely affect the test accuracy. Therefore, a multi-beam stitching method is proposed to correct pointing errors by stitching together data obtained by successive sub-aperture acquisition. In this paper, a test principle and a data processing method are detailed. Simulation results theoretically verify a high precision for the stitching algorithm. Furthermore, a multi-beam array stitching test system (MASTS) is developed and used to successfully test an actual space optical system of ∅800 mm. The MASTS shows a deviation of 1/50 λ (λ = 632.8 nm) root mean square (RMS) from the interferometric results and a repeatability of 1/80 λ RMS, which demonstrates high precision, high repeatability and low sensitivity to air turbulence compared to interferometric measurement. In future engineering applications, the MASTS has great potential to solve the test problems of space optical systems using ultra-large apertures.

Rapid fabrication strategy for Ø1.5 m off-axis parabolic parts using computer-controlled optical surfacing.

Off-axis parabolic parts (OAPs) or quasi-OAPs are mostly frequently used in large optical telescopes. Compared to the stressed mirror polishing, computer-controlled optical surfacing (CCOS) or other computer-controlled subaperture tools provide more flexibility. However, the fabrication efficiency needs to be promoted in tactical ways. In this paper, we present a large aperture CCOS lap equipped with a compound motion unit and go through the grinding and pre-polishing with its figure errors. A CCOS-based heterocercal tool is first used in large optics to restrain the edge effects. In the fine polishing stage, corrective polishing, smoothing, and ion beam figuring are applied in combination to finish. We experimentally test this strategy on an Ø1.5 m OAP, as a part of giant steerable science mirror (GSSM) in the Thirty Meter Telescope. Finally, the surface error of Ø1.5 m OAP is better than 1/50λ RMS (full aperture), and the mid-spatial frequency part is better than 0.64 µrad in slope RMS (effective aperture). The effective fabrication duration is reduced to 2 months.

Effects of the gap slope on the distribution of removal rate in Belt-MRF.

Belt magnetorheological finishing (Belt-MRF) is a promising tool for large-optics processing. However, before using a spot, its shape should be designed and controlled by the polishing gap. Previous research revealed a remarkably nonlinear relationship between the removal function and normal pressure distribution. The pressure is nonlinearly related to the gap geometry, precluding prediction of the removal function given the polishing gap. Here, we used the concepts of gap slope and virtual ribbon to develop a model of removal profiles in Belt-MRF. Between the belt and the workpiece in the main polishing area, a gap which changes linearly along the flow direction was created using a flat-bottom magnet box. The pressure distribution and removal function were calculated. Simulations were consistent with experiments. Different removal functions, consistent with theoretical calculations, were obtained by adjusting the gap slope. This approach allows to predict removal functions in Belt-MRF.