Oyster mantle-derived exosomes alleviate osteoporosis by regulating bone homeostasis.

Osteoporosis is a major public health problem with an urgent need for safe and effective therapeutic interventions. The process of shell formation in oysters is similar to that of bone formation in mammals, and oyster extracts have been proven to exert osteoprotective effects. Oyster mantle is the most crucial organ regulating shell formation, in which exosomes play an important role. However, the effects of oyster mantle-derived exosomes (OMEs) on mammalian osteoporosis and the underlying mechanisms remain unknown. The OMEs investigated herein was found to carry abundant osteogenic cargos. They could also survive hostile gastrointestinal conditions and accumulate in the bones following oral administration. Moreover, they promoted osteoblastic differentiation and inhibited osteoclastic differentiation simultaneously. Further mechanistic examination revealed that OMEs likely promoted osteogenic activity by activating PI3K/Akt/ß-catenin pathway in osteoblasts and blunted osteoclastic activity by inhibiting NF-κB pathway in osteoclasts. These favorable pro-osteogenic effects of OMEs were also corroborated in a rat femur defect model. Importantly, oral administration of OMEs effectively attenuated bone loss and improved the bone microstructure in ovariectomy-induced osteoporotic mice, and demonstrating excellent biosafety. The mechanistic insights from our data support that OMEs possess promising therapeutic potential against osteoporosis.

Monolithic three-dimensional tier-by-tier integration via van der Waals lamination.

Two-dimensional (2D) semiconductors have shown great potential for monolithic three-dimensional (M3D) integration due to their dangling-bonds-free surface and the ability to integrate to various substrates without the conventional constraint of lattice matching1-10. However, with atomically thin body thickness, 2D semiconductors are not compatible with various high-energy processes in microelectronics11-13, where the M3D integration of multiple 2D circuit tiers is challenging. Here we report an alternative low-temperature M3D integration approach by van der Waals (vdW) lamination of entire prefabricated circuit tiers, where the processing temperature is controlled to 120 °C. By further repeating the vdW lamination process tier by tier, an M3D integrated system is achieved with 10 circuit tiers in the vertical direction, overcoming previous thermal budget limitations. Detailed electrical characterization demonstrates the bottom 2D transistor is not impacted after repetitively laminating vdW circuit tiers on top. Furthermore, by vertically connecting devices within different tiers through vdW inter-tier vias, various logic and heterogeneous structures are realized with desired system functions. Our demonstration provides a low-temperature route towards fabricating M3D circuits with increased numbers of tiers.

Volatile Organic Compounds Produced by a Deep-Sea Bacterium Efficiently Inhibit the Growth of Pseudomonas aeruginosa PAO1.

The deep-sea bacterium Spongiibacter nanhainus CSC3.9 has significant inhibitory effects on agricultural pathogenic fungi and human pathogenic bacteria, especially Pseudomonas aeruginosa, the notorious multidrug-resistant pathogen affecting human public health. We demonstrate that the corresponding antibacterial agents against P. aeruginosa PAO1 are volatile organic compounds (VOCs, namely VOC-3.9). Our findings show that VOC-3.9 leads to the abnormal cell division of P. aeruginosa PAO1 by disordering the expression of several essential division proteins associated with septal peptidoglycan synthesis. VOC-3.9 hinders the biofilm formation process and promotes the biofilm dispersion process of P. aeruginosa PAO1 by affecting its quorum sensing systems. VOC-3.9 also weakens the iron uptake capability of P. aeruginosa PAO1, leading to reduced enzymatic activity associated with key metabolic processes, such as reactive oxygen species (ROS) scavenging. Overall, our study paves the way to developing antimicrobial compounds against drug-resistant bacteria by using volatile organic compounds.

Effect of non-enzymatic browning on oysters during hot air drying process: Color and chemical changes and insights into mechanisms.

Hot air drying (HAD) is an extensive method used on oysters and it causes the most intuitive change, a color change. However, the mechanism of color change remains unclear. This study showed that oysters underwent browning during the HAD process. The colorimetric parameter L* decreased while a* and b* increased, all of which were well described by the first-order color kinetic model. Mechanistically, the HDA process induced the oxidative browning of phenols and the generation of Maillard reaction products (5-hydroxymethylfurfural and hydrophilic pyrrole). Meanwhile, the HAD process caused lipid oxidation, leading to the reduction of phosphatidylethanolamine and the generation of reactive carbonyl compounds (aldehydes and α-dicarbonyl compounds). Moreover, the accumulation of hydrophobic pyrroles, a lipid-induced Maillard-like reaction product, was observed. These results suggest that, in addition to phenolic oxidation, sugar- and amino acid-mediated non-enzymatic browning reactions, lipid-mediated Maillard-like reactions play important roles in oyster darkening during the HAD process.

Nickel-Catalyzed Cross-Coupling Reaction of Aryl Bromides/Nitriles with Imidazolium Salts Involving Inert C-N Bond Cleavage.

We herein present a nickel-catalyzed cross-coupling reaction of aryl halides and nitriles with imidazolium salts. A series of 2-arylated imidazoles could be obtained in moderate to good yields through inert C-N bond cleavage. The imidazolium salt in this reaction acts as both a coupling partner and N-heterocyclic carbene (NHC) ligand precursor. Mechanistic studies reveal that consecutive steps of migratory insertion of the NHC into the aryl C-Ni bond and ß-C elimination might be involved in the proposed reaction mechanism.

Breast cancer clinical outcomes and tumor immune microenvironment: cross-dialogue of multiple epigenetic modification profiles.

The discovery of RNA methylation alterations associated with cancer holds promise for their utilization as potential biomarkers in cancer diagnosis, prognosis, and prediction. RNA methylation has been found to impact the immunological microenvironment of tumors, but the specific role of methylation-related genes (MRGs), particularly in breast cancer (BC), the most common cancer among women globally, within the tumor microenvironment remains unknown. In this study, we obtained data from TCGA and GEO databases to investigate the expression patterns of MRGs in both genomic and transcriptional domains in BC. By analyzing the data, we identified two distinct genetic groupings that were correlated with clinicopathological characteristics, prognosis, degree of TME cell infiltration, and other abnormalities in MRGs among patients. Subsequently, an MRG model was developed to predict overall survival (OS) and its accuracy was evaluated in BC patients. Additionally, a highly precise nomogram was created to enhance the practical usability of the MRG model. In low-risk groups, we observed lower TBM values and higher TIDE scores. We further explored how MRGs influence a patient's prognosis, clinically significant characteristics, response to therapy, and the TME. These risk signatures have the potential to improve treatment strategies for BC patients and could be applied in future clinical settings. Moreover, they may also be utilized to determine prognosis and biological features in these patients.

Multidimensional Deep Ultraviolet (DUV) Synapses Based on Organic/Perovskite Semiconductor Heterojunction Transistors for Antispoofing Facial Recognition Systems.

Reliably discerning real human faces from fake ones, known as antispoofing, is crucial for facial recognition systems. While neuromorphic systems offer integrated sensing-memory-processing functions, they still struggle with efficient antispoofing techniques. Here we introduce a neuromorphic facial recognition system incorporating multidimensional deep ultraviolet (DUV) optoelectronic synapses to address these challenges. To overcome the complexity and high cost of producing DUV synapses using traditional wide-bandgap semiconductors, we developed a low-temperature (≤70 °C) solution process for fabricating DUV synapses based on PEA2PbBr4/C8-BTBT heterojunction field-effect transistors. This method enables the large-scale (4-in.), uniform, and transparent production of DUV synapses. These devices respond to both DUV and visible light, showing multidimensional features. Leveraging the unique ability of the multidimensional DUV synapse (MDUVS) to discriminate real human skin from artificial materials, we have achieved robust neuromorphic facial recognition with antispoofing capability, successfully identifying genuine human faces with an accuracy exceeding 92%.

Dopant-induced Morphology of Organic Semiconductors Resulting in High Doping Performance.

Doping plays a crucial role in modulating and enhancing the performance of organic semiconductor (OSC) devices. In this study, the critical role of dopants is underscored in shaping the morphology and structure of OSC films, which in turn profoundly influences their properties. Two dopants, trityl tetrakis(pentafluorophenyl) (TrTPFB) and N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate (DMA-TPFB), are examined for their doping effects on poly(3-hexylthiophene) (P3HT) and PBBT-2T host OSCs. It is found that although TrTPFB exhibits higher doping efficiency, OSCs doped with DMA-TPFB achieve comparable or even enhanced electrical conductivity. Indeed, the electrical conductivity of DMA-TPFB-doped P3HT reaches over 67 S cm-1, which is a record-high value for mixed-solution-doped P3HT. This can be attributed to DMA-TPFB inducing a higher degree of crystallinity and reduced structural disorder. Moreover, the beneficial impact of DMA-TPFB on the OSC films' morphology and structure results in superior thermoelectric performance in the doped OSCs. These findings highlight the significance of dopant-induced morphological and structural considerations in enhancing the film characteristics of OSCs, opening up a new avenue for optimization of dopant performance.

Identification of an IGHV3-53-Encoded RBD-Targeting Cross-Neutralizing Antibody from an Early COVID-19 Convalescent.

Since November 2021, Omicron has emerged as the dominant severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variant, and its sublineages continue to appear one after another, significantly reducing the effectiveness of existing therapeutic neutralizing antibodies (NAbs). It is urgent to develop effective NAbs against circulating Omicron variants. Here, we isolated receptor binding domain (RBD)-specific single memory B cells via flow cytometry from a COVID-19 convalescent. The antibody variable region genes of the heavy chain (VHs) and light chain (VLs) were amplified and cloned into expression vectors. After antibody expression, ELISA screening and neutralizing activity detection, we obtained an IGHV3-53-encoded RBD-targeting cross-neutralizing antibody D6, whose VL originated from the IGKV1-9*01 germlines. D6 could potently neutralize circulating Omicron variants (BA.1, BA.2, BA.4/5 and BF.7), with IC50 values of less than 0.04 µg/mL, and the neutralizing ability against XBB was reduced but still effective. The KD values of D6 binding with RBD of the prototype and BA.1 were both less than 1.0 × 10-12 M. The protein structure of the D6-RBD model indicates that D6 interacts with the RBD external subdomain and belongs to the RBD-1 community. The sufficient contact and deep interaction of D6 HCDR3 and LCDR3 with RBD may be the crucial reason for its cross-neutralizing activity. The sorting and analysis of mAb D6 will provide important information for the development of anti-COVID-19 reagents.

Primary adrenal epithelioid sarcoma (proximal type): a case report and literature review.

Primary adrenal epithelioid sarcoma is a rare lesion of the adrenal gland, and only seven cases have been reported in the domestic and international literature to date. We herein report a case involving a 65-year-old man with primary adrenal epithelioid sarcoma. After being admitted to the hospital with an adrenal mass found on physical examination, the patient underwent laparoscopic right adrenalectomy. Postoperative pathological findings indicated an epithelioid sarcoma (proximal type). Primary adrenal epithelioid sarcoma is a rare malignancy. Diagnosis is challenging and relies on histopathology and immunohistochemical staining.

Leaf Spot Disease of Michelia alba caused by Alternaria alternata in China.

The perennial deciduous tree Michelia alba is a widely cultivated street plant in China. In June 2021 and March 2022, M. alba trees with leaf spots were found in the green belt of the approximately 200,000 m2 community (32.62°N, 116.98°E) of Tianjia'an District, Huainan, Anhui, China, where approximately half of the M. alba trees had brown leaf spots surrounded with irregular yellow halos ranging from 2 to 6 mm in diameter (Fig S1A). The leaves of M. alba trees with multiple lesions became blighted. To isolate the potential pathogens causing leaf spot symptoms in M. alba trees, twenty fragments (2 cm2) were excised from the margin of the necrosis on symptomatic leaves, immersed in 1% sodium hypochlorite for 45 s, and then washed three times in sterile water. The fragments were plated and incubated on potato dextrose agar (PDA) at 25 °C and 15 dark green fungal colonies were obtained 5 days later. Single-spore isolates of the fungal colonies plated on potato carrot agar (PCA, Simmons 2007) produced gray, floccose colonies, which reached 71 mm after 7 days at 25 °C were obtained 5 days later (Fig S1C). Optical microscopy analysis showed that single-spore isolates formed sparsely branched chains with pale brown conidiophores on PCA after incubation at 25 °C in darkness for 7 days. The conidia were ellipsoidal, inverted rod, or ovoid, light brown, and 10.0 to 52.5 × 4.5 to 22.7 µm, with zero to four longitudinal or oblique and zero to eight transverse septa (n = 50). Partial conidia are 2.5 to 27.5 × 0.6 to 3.7 µm with cylindrical light brown beaks (n = 50) (Fig S1D, E). The cultural and morphological characteristics of the isolated fungi were consistent with the description of Alternaria alternata (Woudenberg et al. 2015). To further characterize the isolated fungi, the genomic DNA of three representative strains (BYL-1, BYL-2 and BYL-3) were extracted from their mycelia, respectively. ITS region and housekeeping genes GPD, and TEF, were amplified and sequenced using ITS4/ITS5 (White et al. 1990), Gpd1/Gpd2 (Berbee et al. 1999), and EF1-728F/EF1-986R (Carbone and Kohn 1999), primer pairs, respectively. BLAST analysis showed that the isolates BYL-1 (GenBank accession nos. OP325693, OP405008, and OP405009), BYL-2 (GenBank accession nos. PP057859, PP138442, and PP138444), and BYL-3 (GenBank accession nos. PP057860, PP138443, and PP138445) shared 99 to 100% identity with Alternaria alternata (GenBank accession nos. AF347032.1, AY278809.1, KC584693.1), which suggested that all the three isolates belong to A. alternata. The identifications were further confirmed by phylogenetic analysis based on combined DNA sequences data of ITS, GPD, and TEF. As showed in Fig S2, the strains of BYL-1 , BYL-2 and BYL-3 formed a robust clade with A. alternata CBS918.96. Taken together, the morphology and molecular assays suggest that strain BYL-1 is A. alternata. To test pathogenicity, the isolate BYL-1 was cultured on PCA for 7 days to prepare conidial suspensions, and the spore concentration was adjust to a final concentration of 105 spores/ml. The leaves of 3-5-leaf stage of six 5-years-old natural planting M. alba plants were sprayed with conidial suspensions and sterile distilled water, respectively. The petiole of each inoculated leaves of M. alba were secured with sterile wet cotton, and covered with plastic bags to prevent moisture evaporation after incubation. After a 3- to 5- day of inoculation, necrotic lesions appeared on the leaves inoculated with conidial suspensions, whereas no necrotic lesion was observed in the control leaves inoculated with sterile distilled water (Fig S1B). To fulfill the Koch,s postulates, fungi were re-isolated from the margin of necrotic lesions and identified as A. alternata by DNA sequencing the ITS gene. To our knowledge, this is the first report of A. alternata causing leaf spot on M. alba. Because the disease could cause damage to the foliage influencing the greening and ornamental effects of these trees, control measures may need to be implemented during daily management.

Recurrence complicated with peritoneal dissemination after single-port gasless myomectomy for cellular uterine leiomyoma: A case report and literature review.

RATIONALE: Cellular uterine leiomyomas (CL) represent the prevailing subtype among uterine leiomyomas. In this study, we report a case of recurrent peritoneal disseminated uterine fibroids 2 years after single-port laparoscopic gasless myomectomy. This article endeavors to examine the potential limitations of the aforementioned surgical procedure and outline the distinguishing features of recurrent cases with primary postoperative pathology as CL. Additionally, it aims to provide a summary of previous retrospective studies on CL and propose the existence of immunohistochemical molecules that may serve as predictors for the postoperative recurrence of cellular uterine fibroids. The ultimate objective is to enhance clinicians' comprehension of the disease. PATIENT CONCERNS: Two years ago, the patient underwent a single-port gasless laparoscopic myomectomy for uterine fibroids. Gynecological color Doppler ultrasound conducted 3 months ago revealed recurrence of uterine fibroids, and the patient experienced abdominal distension, mild urinary frequency, and constipation for the past month. DIAGNOSES: After the second surgical procedure, a comprehensive pathological examination and immunohistochemical analysis of both the uterine mass and metastatic lesions revealed that the definitive diagnosis was CLs. INTERVENTIONS: The patient underwent the total hysterectomy, bilateral salpingectomy, pelvic adhesiolysis, omental mass resection, mesenteric mass resection, and pelvic peritoneal mass resection. All specimens were sent for rapid frozen examination and showed to be leiomyomas. OUTCOMES: The patient was discharged from the hospital on the 10th day after the operation. At the date of writing the article, the patient had no recurrence for 1 year and 5 months. LESSONS: The single-port gasless approach did not achieve the desired reduction in fibroid recurrence, as anticipated by the surgeon. The act of pulling the tumor towards the abdominal incision for resection, on the contrary, may serve as an iatrogenic factor contributing to postoperative recurrence of CL into peritoneal dissemination leiomyomatosis. The single-port gasless assisted bag may be a more suitable option for myomectomy. The utmost effort should be made to prevent the potential recurrence of myoma caused by iatrogenic factors.

A Transpiration-Driven Electrokinetic Power Generator with a Salt Pathway for Extended Service Life in Saltwater.

To ensure prolonged functionality of transpiration-driven electrokinetic power generators (TEPGs) in saltwater environments, it is imperative to mitigate salt accumulation. This study presents a salt pathway transpiration-driven electrokinetic power generator (SPTEPG), incorporating MXene, graphene oxide (GO), and carbon nanotubes (CNTs) as active materials, along with cellulose nanofibers (CNF) and poly(vinyl alcohol) (PVA) as aqueous binders and nonwoven fabrics. This unique combination confers exceptional hydrophilicity and enhances the energy generation performance. When tested with deionized water, the SPTEPG achieved a maximum voltage of 0.6 V and a current of 4.2 µA. In simulated seawater conditions, the presence of conductive ions in the solution boosted these values to 0.64 V and 42 µA. The incorporation of the salt pathway mechanism facilitates the return of excess salt deposits to the bulk solution, thus extending the SPTEPG's service life in saltwater environments. This research offers a straightforward yet effective strategy for designing transpiration-driven power generators suitable for saline water applications.

Application of non-mydriatic fundus photography-assisted telemedicine in diabetic retinopathy screening.

BACKGROUND: Early screening and accurate staging of diabetic retinopathy (DR) can reduce blindness risk in type 2 diabetes patients. DR's complex pathogenesis involves many factors, making ophthalmologist screening alone insufficient for prevention and treatment. Often, endocrinologists are the first to see diabetic patients and thus should screen for retinopathy for early intervention. AIM: To explore the efficacy of non-mydriatic fundus photography (NMFP)-enhanced telemedicine in assessing DR and its various stages. METHODS: This retrospective study incorporated findings from an analysis of 93 diabetic patients, examining both NMFP-assisted telemedicine and fundus fluorescein angiography (FFA). It focused on assessing the concordance in DR detection between these two methodologies. Additionally, receiver operating characteristic (ROC) curves were generated to determine the optimal sensitivity and specificity of NMFP-assisted telemedicine, using FFA outcomes as the standard benchmark. RESULTS: In the context of DR diagnosis and staging, the kappa coefficients for NMFP-assisted telemedicine and FFA were recorded at 0.775 and 0.689 respectively, indicating substantial intermethod agreement. Moreover, the NMFP-assisted telemedicine's predictive accuracy for positive FFA outcomes, as denoted by the area under the ROC curve, was remarkably high at 0.955, within a confidence interval of 0.914 to 0.995 and a statistically significant P-value of less than 0.001. This predictive model exhibited a specificity of 100%, a sensitivity of 90.9%, and a Youden index of 0.909. CONCLUSION: NMFP-assisted telemedicine represents a pragmatic, objective, and precise modality for fundus examination, particularly applicable in the context of endocrinology inpatient care and primary healthcare settings for diabetic patients. Its implementation in these scenarios is of paramount significance, enhancing the clinical accuracy in the diagnosis and therapeutic management of DR. This methodology not only streamlines patient evaluation but also contributes substantially to the optimization of clinical outcomes in DR management.

Characterization of a Novel Antimicrobial Peptide Bacipeptin against Foodborne Pathogens.

The increasing emergence of multidrug-resistant pathogens and development of biopreservatives in food industries has increased the demand of novel and safe antimicrobial agents. In this study, a marine bacterial strain Bacillus licheniformis M1 was isolated and exhibited obvious antimicrobial activities against foodborne pathogens, especially against methicillin-resistant Staphylococcus aureus. The antimicrobial agent was purified and identified as a novel antimicrobial peptide, which was designated as bacipeptin, and the corresponding mechanism was further investigated by electron microscopy observation and transcriptomic analysis with biochemical validation. The results showed that bacipeptin could reduce the virulence of methicillin-resistant Staphylococcus aureus and exerted its antimicrobial activity by interfering with histidine metabolism, inducing the accumulation of reactive oxygen species and down-regulating genes related to Na+/H+ antiporter and the cell wall, thus causing damage to the cell wall and membrane. Overall, our study provides a novel natural product against foodborne pathogens and discloses the corresponding action mechanism.

Cross-layer transmission realized by light-emitting memristor for constructing ultra-deep neural network with transfer learning ability.

Deep neural networks have revolutionized several domains, including autonomous driving, cancer detection, and drug design, and are the foundation for massive artificial intelligence models. However, hardware neural network reports still mainly focus on shallow networks (2 to 5 layers). Implementing deep neural networks in hardware is challenging due to the layer-by-layer structure, resulting in long training times, signal interference, and low accuracy due to gradient explosion/vanishing. Here, we utilize negative ultraviolet photoconductive light-emitting memristors with intrinsic parallelism and hardware-software co-design to achieve electrical information's optical cross-layer transmission. We propose a hybrid ultra-deep photoelectric neural network and an ultra-deep super-resolution reconstruction neural network using light-emitting memristors and cross-layer block, expanding the networks to 54 and 135 layers, respectively. Further, two networks enable transfer learning, approaching or surpassing software-designed networks in multi-dataset recognition and high-resolution restoration tasks. These proposed strategies show great potential for high-precision multifunctional hardware neural networks and edge artificial intelligence.

Decreased PDLIM1 expression in endothelial cells contributes to the development of intracranial aneurysm.

INTRODUCTION: Intracranial aneurysm (IA) is a common vascular enlargement that occurs in the wall of cerebral vessels and frequently leads to fatal subarachnoid hemorrhage. PDZ and LIM domain protein 1 (PDLIM1) is a cytoskeletal protein that functions as a platform for multiple protein complex formation. However, whether PDLIM is involved in the pathogenesis of IA remains poorly understood. METHODS: Loss-of-function and gain-of-function strategies were employed to determine the in vitro roles of PDLIM1 in vascular endothelial cells (VECs). A rat model of IA was generated to study the role of PDLIM1 in vivo. Gene expression profiling, Western blotting, and dual luciferase reporter assays were performed to uncover the underlying cellular mechanism. Clinical IA samples were used to determine the expression of PDLIM1 and its downstream signaling molecules. RESULTS: PDLIM1 expression was reduced in the endothelial cells of IA and was regulated by Yes-associated protein 1 (YAP1). Genetic silencing of PDLIM1 inhibited the viability, migratory ability, and tube formation ability of VECs. Opposite results were obtained by ectopic expression of PDLIM1. Additionally, PDLIM1 overexpression mitigated IA in vivo. Mechanistic investigations revealed that PDLIM1 promoted the transcriptional activity of ß-catenin and induced the expression of v-myc myelocytomatosis viral oncogene homolog (MYC) and cyclin D1 (CCND1). In clinical settings, reduced expression of PDLIM1 and ß-catenin downstream target genes was observed in human IA samples. CONCLUSION: Our study indicates that YAP1-dependent expression of PDLIM1 can inhibit IA development by modulating the activity of the Wnt/ß-catenin signaling pathway and that PDLIM1 deficiency in VECs may represent a potential marker of aggressive disease.

Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete.

The rapid construction of prefabricated components of reinforced-concrete structures using three-dimensional (3D) printing of concrete as a permanent formwork is a promising way to combine 3D printing organically with traditional construction technology. The bonding property of the contact interface between the 3D-printed permanent formwork and internal postcast concrete is crucial for maintaining the overall mechanical performance of the 3D-printed structure. In this study, the roughness of contour formworks was quantified by using 3D scanning. A large-scale formwork was fabricated by using a robotic 3D printer, and four types of cast-in-place concrete were poured into the formwork to form solid components. The interfacial bonding properties between the formwork and cast material were evaluated by splitting tensile tests and antisymmetric four-point bending shear tests. The interfacial microstructure was analyzed by using computed tomography and scanning electron microscopy. The bond performance can mainly be attributed to the mechanical interlock at the interface between the contour formwork and cast aggregated concrete. The self-compacting concrete with the expansion agent contributes the most to the interface bonding.

Shrinkage and Cracking Properties of Cellulose Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing.

Compared with conventional formwork casting materials, 3D printed concrete (3DPC) is characterized by large amounts of cementitious materials, a low aggregate-binder ratio, and a large water evaporation area, which make the printed materials and structures highly prone to plastic shrinkage and cracking. In this study, cellulose fibers were incorporated into concrete to improve its moisture distribution and increase its early-age strength. The effects of both dry and prewet cellulose fibers on properties of 3DPC were experimentally investigated. To ensure consistency in the amounts of dry fibers used, 0.5-2% dry cellulose fibers and 1-4% prewet cellulose fibers were adopted. The effects of the added cellulose fibers on printability, mechanical strength, shrinkage, and cracking performance of the 3DPC were experimentally studied. Particularly, a constraint method was developed to access the cracking behavior of 3DPC. Favorable shrinkage resistance was achieved, and the 120-day shrinkage decreased by 17.9% and 23.3% by addition of 2% dry fibers and 4% prewet fibers, respectively. Cracking was eliminated with addition of 4% prewet fibers, without influencing the printability and mechanical properties.

Remediation of crude oil contaminated soil through an integrated biological-chemical-biological strategy.

A plausible approach to remediating petroleum contaminated soil is the integration of chemical and biological treatments. Using appropriate chemical oxidation, the integrated remediation can be effectively achieved to stimulate the biodegradation process, consequently bolstering the overall remediation effect. In this study, an integrated biological-chemical-biological strategy was proposed. Both conventional microbial degradation techniques and a modified Fenton method were employed, and the efficacy of this strategy on crude oil contaminated soil, as well as its impact on pollutant composition, soil environment, and soil microorganism, was assessed. The results showed that this integrated remediation realized an overall 68.3 % removal rate, a performance 1.7 times superior to bioremediation alone and 2.1 times more effective than chemical oxidation alone, elucidating that the biodegradation which had become sluggish was invigorated by the judicious application of chemical oxidation. By optimizing the positioning of chemical treatment, the oxidization was allowed to act predominantly on refractory substances like resins, thus effectively enhancing pollutant biodegradability. Concurrently, this oxidating maneuver contributed to a significant increase in concentrations of dissolvable nutrients while maintaining appropriate soil pH levels, thereby generating favorable growth conditions for microorganism. Moreover, attributed to the proliferation and accumulation of degrading bacteria during the initial bioremediation phase, the microbial growth subsequent to oxidation showed rapid resurgence and the relative abundance of typical petroleum-degrading bacteria, particularly Proteobacteria, was substantially increased, which played a significant role in enhancing overall remediation effect. Our research validated the feasibility of biological-chemical-biological strategy and elucidated its correlating mechanisms, presenting a salient reference for the further studies concerning the integrated remediation of petroleum contaminated soil.