ABSTRACT
Improving the stability of large-area organic light-emitting diodes is very important for practical applications. The interfacial layer plays a crucial role to improve the electron injection characteristic. In this work, devices prepared by various solution-processed interfacial materials and thermal-evaporated CsF were compared. In the devices with active area of 2.25 mm × 2.25 mm, we found that the performance and lifetime of the device with solution-processed Liq interfacial layer was comparable with the device with thermal-evaporated CsF. However, for the devices with active area of 2.4 cm × 3.7 cm, the device based on thermal-evaporated CsF was the champion in both performance and lifetime. The influence of the thickness of CsF on the stability was investigated. The most stable blue fluorescent devices can be achieved when the thickness of CsF is about 0.1 nm, while the most stable green phosphorescent devices can be obtained by depositing 0.2 nm CsF. The best current efficiency for the blue fluorescent device is 4 cd A-1, while the best one for the green phosphorescent device is 22 cd A-1. Furthermore, burning points causing the failure of the devices were investigated by scanning electron microscopy, atomic force microscopy, thermography and secondary ion mass spectrometry. We demonstrated that burning points are defects, which can be observed after long-time operation, showing higher local temperature and fragmentary electrode.
ABSTRACT
The instability of the organic light-emitting diodes (OLEDs) during operation can be attributed to the existence of point defects on the organic layers. In this work, the effect of mixed-host emissive layer and the thermal annealing treatment were investigated to eliminate defects and to boost the device performance. The mixed-host system includes 4,4',4''-tri (9-carbazoyl) triphenylamine (TCTA) and 2,7-bis(diphenylphosphoryl)-9, 9'-spirobi[fluorene] (SPPO13). The mixed-host emissive layer with thermal annealing treatment showed low roughness and few pinholes, and the devices fabricated from this emissive layer exhibited high efficiencies, high stabilities, and long lifetimes. The red and orange-red OLEDs exhibited efficiencies of 13.9â cd/A and 24.35â cd/A, respectively. The longest half-lifetime (L0 =500â cd/m2 ) of the red and orange-red OLEDs were 158â h and 180â h, respectively. Efforts were made to solve problems in large-area coating and to reduce the number of defects on in organic layer. Large-active-area (active area=3â cm×4â cm) red phosphorescent OLEDs (PhOLEDs) devices were realized with very high current efficiency up to 9â cd/A.
ABSTRACT
We report the synthesis of chiral furanyl and pyranyl dienes 1 and 2 based on cycloalkenation of chiral tungsten alkynol complexes. These two dienes bear a chiral 1,3-dioxolane group to control diastereoselective Diels-Alder reactions with electron-deficient olefins. The chiral 1,3-dioxolane substituents of the cycloadducts were degraded into hydrogen atoms to make these molecules possess common furan and pyran rings. Dienes 1 and 2 are good building blocks for enantiopure forms of tricyclic oxygen compounds.
ABSTRACT
We report a ruthenium-catalyzed reaction for various 3-benzyl but-1-ynyl ethers with suitable functionalities. Treatment of these substrates with TpRu(PPh3)(CH3CN)2PF6 (8.0 mol %) catalyst in 1,2-dichloroethane (80 degrees C, 12 h) afforded functionalized 1,3-dienes and benzyl aldehyde in good yields. This process is considered to be a tandem dealkoxylation and transfer hydrogenation. Deuterium-labeling experiments reveal that the migration of different hydrogen atoms proceeds regiospecifically. A plausible mechanism is proposed on the basis of the results of isotope experiment.
