Spatial distribution and migration of lead and zinc and the influence of parent materials in typical paddy soils of Hunan Province, China.

This study aimed to investigate the distribution and migration characteristics of lead (Pb) and zinc (Zn) in paddy soils in Hunan Province, China. A total of 343 soil samples from 63 profiles were collected from typical regions. The concentration, spatial distribution, and migration behaviors of Pb and Zn in the paddy soils were examined. The results showed that (1) the concentration ranges of Pb and Zn in the surface layer were 17.62-114.07 mg/kg and 44.98-146.84 mg/kg, respectively. (2) The content was higher in the middle and lower reaches of the Xiangjiang River basin horizontally and exhibited shallow enrichment characteristics vertically. (3) Pb migration was weaker than Zn migration, and the parent material had the most significant influence on Pb and Zn content in the bottom soil layer. The research results will clarify the characteristics of Pb and Zn contents in paddy soils in Hunan Province, further understand the horizontal distribution and vertical migration and transformation characteristics of Pb and Zn contents in paddy soils, and provide basic data for scientific rice cultivation and safe food production.

Field to laboratory comparison of metal accumulation on aged microplastics in coastal waters.

The ubiquity of microplastics in the environment has attracted much attention on their risks. Though newly produced plastics were considered inert to aqueous metals, a few studies suggest aged microplastics can accumulate metals. Still, knowledge gap exists on the comparability of metal accumulation in field condition and that acquired in controlled laboratory settings. Accordingly, we comparatively assessed the field accumulation and laboratory adsorption of metals on aged microplastics in coastal waters. Microplastics of different polymeric types were aged for 8 weeks at three coastal sites with different contamination levels. Microplastics accumulated metals to substantial concentrations during ageing (median concentrations, µg g-1: Fe = 950, Mn = 94, Zn = 19, Cu = 2.8, Ni = 1.7, Pb = 1.6, and Cd = 0.005). Adsorption capacity of (aged) microplastics was evaluated in laboratory using a stable isotope tracer method. At environmentally realistic concentrations (µg L-1, 114Cd = 1.7, 65Cu = 4.4, 62Ni = 5.4, 206Pb = 0.5, and 68Zn = 13), the median concentrations of newly adsorbed isotopes on the aged microplastics were 0.01, 1.4, 0.07, 0.56, and 1.1 µg g-1, respectively, one to two orders of magnitude higher than those adsorbed on pristine microplastics. However, the composition pattern of metals accumulated on aged microplastics differed from the composition of metals newly adsorbed in laboratory: the prior one reflected the contamination status of ageing sites and varied by polymeric types; whereas the laboratory newly adsorbed metals on aged microplastics were uniformly correlated to particulate Fe and Mn concentrations, suggesting Fe and Mn mineral coatings mediated the ensuing metal adsorption. Such discrepancy unveiled the complexity of metal accumulation behavior in the real environment and highlighted that cares should be taken when translating laboratory findings to risk assessment of metal contaminated microplastics in the real environment.

Ga-doped TiZnO transparent conductive oxide used as an alternative anode in blue, green, and red phosphorescent OLEDs.

X-ray diffraction was used to study the optoelectronic characteristics of Ga-doped TiZnO (GTZO) thin film and revealed increased crystallinity with annealing temperatures ranging from as-grown to 450 °C. The low thin film resistivity of 6.1 × 10(-4) Ω cm and the average high optical transmittance of 93% in the wavelength range between 350 and 800 nm make GTZO an alternative candidate for application in organic light-emitting diodes (OLEDs). Both GTZO and indium-tin-oxide (ITO) anodes are employed for the successful fabrication of blue, green, and red phosphorescent OLEDs. The similar device electrical characteristics observed could be interpreted as evidence of the effectiveness of doping Ga in TiZnO. The simplified tri-layer blue, green, and red phosphorescent OLEDs demonstrated high performance with respective maximum efficiencies of 19.0%, 14.5%, and 9.1%, representing an improvement over ITO-based OLEDs. Furthermore, the OLEDs with the GTZO anode exhibited superior performance at higher current densities, demonstrating high potential for OLED display and lighting applications.