ABSTRACT
This work explores the nanomechanics of sphere titanium oxide nanooils in reducing friction between two pieces of cast iron. A friction test is performed using an ATE-77 Reciprocal Tribological Tester made by Cameron-Plint Tribology Limited, England. The friction between two pieces of cast iron was determined 25-135 degrees C using home-made titanium oxide nanooils. In elastohydrodynamic lubrication (EHL), the lubricant is subjected to enormous pressures, there is considerable local heating, and the assumption of constant viscosity no longer holds up. The derivation of the governing equations for elastohydrodynamic lubrication, the pressure and temperature dependence of viscosity is recognized after the lubrication thin film approximation has been made. The viscosity of the nanooils consistently exceeded that of the paraffin oil enlarging the partial EHL area with a complete lubricating film between two move iron surfaces. The spherical geometry of TiO2 nanoparticles caused them to act as a rolling medium when the machine parts move which is in the solid friction area. Because they provide a rolling function, spherical titanium oxide nanoparticles have feasible tribological and lubrication applications in the mechanical industry to reduce noise, vibration and friction wear.
ABSTRACT
This study deals with the fabrication of three different morphologies of TiO2 nanoparticles to fabricate two-layer photoelectrode thin film for dye-sensitized solar cells (DSSC). The four different TiO2 morphologies are titania nanotubes (Tnt), TiO2 nanoparticles (H220), TiO2 nanoparticle (SP) and commercial DP-25 nanoparticles (P-25). To prepare the thin films of the photoelectrodes, the first layer is coated by H220 TiO2 nanoparticles, and the second is coated by 3 kinds of materials optimally proportionally mixed - P25, SP and Tnt. The photoelectric conversion efficiency of DSSCs with photoelectrodes fabricated using H220 reached 6.31%. Finally, the TiO2 nanaomaterials with four different morphologies were used to prepare a two layer photoelectrode with the structure of H220/P25-Tnt-SP which was combined with a Pt counter electrode to assemble DSSCs. These DSSCs had photoelectric conversion efficiencies of as high as 7.47%.
ABSTRACT
This study applies the thermoelectric grains of Sb2Te3 on conductive glass to evaporate Sb2Te3 thin films by the electron beam evaporation method. Through experimental tests with different evaporation process parameters and film annealing conditions, thin films with better Seebeck coefficient, resistivity (p) and power fact (PF) can be obtained. Experimental results show that when thin films are annealed, their defects can be decreased accordingly, and carrier mobility can be enhanced to further elevate the conductivity of thin films. When the substrate temperature is set at 200 degrees C to fabricate Sb2Te3 thin films by the evaporation process and by annealing at 220 degrees C for 60 minutes, the Seebeck coefficient of Sb2Te3 thin films increase from 87.6 microV/K to 177.7 microV/K; resistivity falls from 6.21 m ohms-cm to 2.53 m ohms-cm and PF can achieve the maximum value of 1.24 10(-3) W/K2 m. Finally, this study attempts to add indium (In) to Sb2Te3 thin films. Indium has been successfully fabricated In3SbTe, thin films. This study also analyzes the effects of In on the thermoelectric properties of In3SbTe2 thin films.
ABSTRACT
Using the polymer blending method, conductive materials and waterborne polyurethane (WPU) were mixed to fabricate conductive composite films for application in electromagnetic shielding. First, nitric acid was used to purify the multi-walled carbon nanotubes (MWCNT). Second, sodium dodecyl sulfate (SDS) was utilized to disperse the carbon nanotubes, and then they were mixed with 8 microm diameter and 2 mm long stainless steel fibers (SSF) in the WPU by the polymer blending method. Finally, the thickness of 0.25 mm of conductive composite film was fabricated by means of coating. According to the ASTM D4935-99 standard, a coaxial transmission line was used to measure the electromagnetic shielding effectiveness (EMSE) of conductive composite film within the range of 50 MHz approximately 3.0 GHz. Moreover, the influence of the prior and posterior dispersion of carbon nanotubes dispersed on electromagnetic shielding was dealt with in the paper. Results demonstrated that the conductive composite film, within 50 MHz approximately 3.0 GHz, fabricated by the 15 wt% of the multi-walled carbon nanotubes and 30 wt% of the stainless steel fibers can achieve the maximum of the electromagnetic shielding effectiveness, 34.86 dB, and its shielding effect, 99.9%.
ABSTRACT
This study uses the sol-gel method to prepare TiO2 nanoparticle, and further applies TiO2 nanoparticle coating on the surface of the multi-wall carbon nanotube (MWCNT). As a result, TiO2-CNT composite nanoparticles are prepared to serve as photoelectrode material in dye-sensitized solar cell (DSSC). First, after acid treatment of MWCNT is used to remove impurities. Then, the sol-gel method is employed to prepare TiO2-CNT composite nanopowder. X-ray diffraction (XRD) pattern shows that after the TiO2 in TiO2-CNT composite nanopowder has been thermally treated at 450 degrees C, it can be completely changed to anatase phase. Furthermore, as shown from the SEM image, TiO2 has been successfully coated on CNT. The photoelectrode of DSSC is prepared using the electrophoretic deposition method (EPD) to mix the Degassa P25 TiO2 nanoparticles with TiO2-CNT powder for deposition on the indium tin oxide (ITO) conductive glass. After secondary EPD, a thin film of TiO2/CNTs with thickness 17 microm can be acquired. For the prepared TiO2-CNT composite nanoparticles, since MWCNT can increase the short-circuit current density of DSSC, the light-to-electricity conversion efficiency of DSSC can be effectively increased. Experimental results show that the photoelectric conversion efficiency of DSSC using CNT/TiO2 photoelectrode and N719 dye is increased by 41% from the original 3.45% to 4.87%.
