Costal cartilage grafting in the treatment of concurrent osteochondral lesion of the talus in a trimalleolar fracture.

A 49-year-old female sustained a trimalleolar fracture concurrent with 10 years history of symptomatic osteochondral lesions of the talus. We performed a costal cartilage grafting for osteochondral lesions of the talus through the inherent medial malleolar fracture gap, followed by internal fixation of the fracture. During the follow-up, the fracture healed within the expected time, accompanied by favorable functional outcomes and pre-injury pain relief. At 3 years postoperatively, the graft merged with the bone bed of the talus, and progressive endochondral ossification was observed at the graft-bone interface. The case provides us a chance to verify whether the costal cartilage grafting is reliable for the treatment of osteochondral lesions of the talus.

Autologous Costal Cartilage Grafting for a Large Osteochondral Lesion of the Femoral Head: A 1-Year Single-Arm Study with 2 Additional Years of Follow-up.

BACKGROUND: There is currently no ideal treatment for osteochondral lesions of the femoral head (OLFH) in young patients. METHODS: We performed a 1-year single-arm study and 2 additional years of follow-up of patients with a large (defined as >3 cm 2 ) OLFH treated with insertion of autologous costal cartilage graft (ACCG) to restore femoral head congruity after lesion debridement. Twenty patients ≤40 years old who had substantial hip pain and/or dysfunction after nonoperative treatment were enrolled at a single center. The primary outcome was the change in Harris hip score (HHS) from baseline to 12 months postoperatively. Secondary outcomes included the EuroQol visual analogue scale (EQ VAS), hip joint space width, subchondral integrity on computed tomography scanning, repair tissue status evaluated with the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score, and evaluation of cartilage biochemistry by delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC) and T2 mapping. RESULTS: All 20 enrolled patients (31.02 ± 7.19 years old, 8 female and 12 male) completed the initial study and the 2 years of additional follow-up. The HHS improved from 61.89 ± 6.47 at baseline to 89.23 ± 2.62 at 12 months and 94.79 ± 2.72 at 36 months. The EQ VAS increased by 17.00 ± 8.77 at 12 months and by 21.70 ± 7.99 at 36 months (p < 0.001 for both). Complete integration of the ACCG with the bone was observed by 12 months in all 20 patients. The median MOCART score was 85 (interquartile range [IQR], 75 to 95) at 12 months and 75 (IQR, 65 to 85) at the last follow-up (range, 24 to 38 months). The ACCG demonstrated magnetic resonance properties very similar to hyaline cartilage; the median ratio between the relaxation times of the ACCG and recipient cartilage was 0.95 (IQR, 0.90 to 0.99) at 12 months and 0.97 (IQR, 0.92 to 1.00) at the last follow-up. CONCLUSIONS: ACCG is a feasible method for improving hip function and quality of life for at least 3 years in young patients who were unsatisfied with nonoperative treatment of an OLFH. Promising long-term outcomes may be possible because of the good integration between the recipient femoral head and the implanted ACCG. LEVEL OF EVIDENCE: Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.

Bone marrow lesion on magnetic resonance imaging indicates the last chance for hip osteonecrosis treated with vascularized fibular grafting before collapse.

PURPOSE: Timing of surgery is the most critical prognostic factor for hip osteonecrosis treated with free vascularized fibular grafting (FVFG). Bone marrow lesion (BML) on MRI usually occurs immediately before femoral head collapse. We conducted a retrospective cohort study to evaluate whether the noncollapsed hips with BML can benefit from FVFG. METHODS: Consecutive patients undergoing modified FVFG were identified from our clinical repository between January 2014 and December 2014. Based on whether BML was pre-operatively detected, the four year radiographic and clinical outcomes were compared. RESULTS: In the BML cohort, 22 of 53 hips (42%) showed radiographic signs of osteonecrosis progression, which was significantly higher than that in the control cohort (8 of 49, 16%; P = 0.005). The BML hips showed a significantly lower pre-operative Harris Hip Score (HHS) than those without BML (77.8 vs. 85.5, P = 0.046), whereas no such difference was observed in the final HHS or its post-operative improvement (HHS 90 vs. 94, P = 0.397; HHS improvement 12 vs. 8, P = 0.067). In the subgroup of patients with a pre-operative HHS lower than 80, BML hips were associated with a slightly lower final HHS than hips without BML. Four of 5 (80%) failed hips with BML had a poor pre-operative hip function. CONCLUSION: BML indicates the last chance for a reproducible improvement in the treatment of hip osteonecrosis with FVFG before collapse. However, the concomitant lower pre-operative HHS (< 80) is a poor prognostic factor for BML-positive hips.

The Delayed-Onset Mechanical Pain Behavior Induced by Infant Peripheral Nerve Injury Is Accompanied by Sympathetic Sprouting in the Dorsal Root Ganglion.

BACKGROUND: Sympathetic sprouting in the dorsal root ganglion (DRG) following nerve injuries had been proved to induce adult neuropathic pain. However, it is unclear whether the abnormal sprouting occurs in infant nerve injury. METHODS: L5 spinal nerve ligation (SNL) or sham surgery was performed on adult rats and 10-day-old pups, and mechanical thresholds and heat hyperalgesia were analyzed on 3, 7, 14, 28, and 56 postoperative days. Tyrosine hydroxylase-labeled sympathetic fibers were observed at each time point, and 2 neurotrophin receptors (p75NTR and TrkA) were identified to explore the mechanisms of sympathetic sprouting. RESULTS: Adult rats rapidly developed mechanical and heat hyperalgesia from postoperative day 3, with concurrent sympathetic sprouting in DRG. In contrast, the pup rats did not show a significantly lower mechanical threshold until postoperative day 28, at which time the sympathetic sprouting became evident in the DRG. No heat hyperalgesia was presented in pup rats at any time point. There was a late expression of glial p75NTR in DRG of pups from postoperative day 28, which was parallel to the occurrence of sympathetic sprouting. The expression of TrkA did not show such a postoperative syncing change. CONCLUSION: The delayed-onset mechanical allodynia in the infant nerve lesion was accompanied with parallel sympathetic sprouting in DRG. The late parallel expression of glial p75NTR injury may play an essential role in this process, which provides novel insight into the treatment of delayed adolescent neuropathic pain.

A circular RNA derived from DAB1 promotes cell proliferation and osteogenic differentiation of BMSCs via RBPJ/DAB1 axis.

Osteogenesis (OS) is a type of differentiation that is of great importance for bone homeostasis. Increasing studies suggest circular RNAs (circRNAs) as pivotal regulators in OS. This study proposed to investigate mechanism mediated by circRNAs in OS. Based on GEO data and qRT-PCR assay, we found that circ-DAB1 (has_circ_0113689) was significantly up-regulated during osteogenic differentiation in human BMSCs. Overexpressing circ-DAB1 proliferation and osteogenic differentiation of BMSCs, whereas silencing circ-DAB1 elicited opposite functions. Subsequently, recombination signal-binding protein for immunoglobulin kappa J region (RBPJ), an important transcription factor in NOTCH pathway, was found to interact with DAB1 promoter while not to combine with circ-DAB1. Interestingly, circ-DAB1 overexpression could result in the increasing binding between RBPJ and DAB adaptor protein 1 (DAB1) promoter. Overexpressing circ-DAB1 upregulated RBPJ in BMSCs to induce DAB1 level. Further, we uncovered that circ-DAB1 upregulated RBPJ through sequestering miR-1270 and miR-944. Restoration experiments demonstrated that knocking down either RBPJ or DAB1 partially recovered BMSC proliferation and osteogenic differentiation that was suppressed by circ-DAB1 overexpression. Conclusively, circ-DAB1 promotes cell proliferation and osteogenic differentiation of BMSCs via NOTCH/RBPJ pathway.

Simultaneous dislocation of the radial head and distal radio-ulnar joint without fracture in an adult patient: a case report and review of literature.

BACKGROUND: Simultaneous dislocation of the radial head and distal radio-ulnar joint without fracture (Criss-Cross Injury) in an adult patient is rarely reported in previous studies. The pathological changes and injury patterns have not been clearly demonstrated. CASE PRESENTATION: A 26-year-old woman presented with acute pain of the right wrist and elbow after a fall from cycling. Physical examination revealed an unstable elbow and wrist joint. Plain radiographs showed volar dislocation of the radial head and dorsal dislocation of the distal radius without associated fracture, forming a criss-cross appearance of the ulna and radius on the lateral radiograph. MRI images confirmed partial rupture of the proximal interosseous membrane from its dorsal attachment on the radius, as well as partial rupture of the medial collateral ligament. Conservative treatment failed because the radiocapitellar joint and distal radio-ulnar joint could not be simultaneously reduced. Surgical exploration revealed a highly unstable radial head, but the annular ligament was found to be intact. Manual force was applied to reduce the radial head and a percutaneous K-wire was used to stabilize the proximal radioulnar joint with the forearm in full supination. After surgery, the elbow was immobilized in 90° flexion by a long arm cast for 4 weeks. The K-wire was removed at 6 weeks postoperatively. At 18 months postoperatively, the patient had regained a full range of flexion and extension, with normal supination and a slight limitation in pronation. CONCLUSIONS: The proximal IOM, especially the dorsal band, was injured in Criss-Cross injuries, while the central part of the IOM remained intact. This injury pattern distinguished itself from Essex-Lopresti injury, which mainly involves rupture of the central band of the IOM.

Plate fixation for Letenneur type I Hoffa fracture: a biomechanical study.

BACKGROUND: A coronal fracture of the posterior femoral condyle, also known as a Hoffa fracture, is an unusual injury, and there are only a handful of case reports or series exploring it. The optimal fixation method of these intraarticular fractures remains controversial; improper or unstable fixation usually lead to an unsatisfactory prognosis. The use of posterior-anterior or reversed lag screw fixation is still a popular method. Additional buttress plating is also recommended for fixation of these difficult fractures. The purpose of this study was to compare the mechanical strength of four different fixation patterns for this uncommon fracture. MATERIAL AND METHODS: Sixteen sawbone simulated models of Letenneur type I Hoffa fractures were created with one of four fixation patterns: two screws implanted in the anterior-posterior (AP) direction or posterior-anterior (PA) direction; one screw in the PA direction with a plate implanted in the posterior position of the distal femoral condyle or with a plate in the lateral position. Biomechanical testing was performed to determine the post-fixation axial stiffness, the maximum load to failure and the fragment vertical displacement for each of the four constructs. RESULTS: The plate fixation patterns whether implanted in the posterior or lateral position were shown to provide higher overall axial stiffness and load to failure, and less vertical displacement than the other two patterns of pure screw fixation. Among these constructs, the lateral plate fixation was found to provide the highest stiffness and load to failure and the least displacement for the posterior condylar fragments, followed by the posterior plate fixation. The lowest overall stiffness and load to failure and the largest vertical displacement were found in the construct with the AP direction placed screws. CONCLUSION: It was concluded that the lateral position implanted plate is biomechanically the strongest fixation method for Letenneur type I Hoffa fractures. However, this plate fixation is not recommended for all cases. The choice of internal fixation pattern depends on the surgeons.

A Comparison of Surgical Invasions for Spinal Nerve Ligation with or without Paraspinal Muscle Removal in a Rat Neuropathic Pain Model.

L5 spinal nerve ligation (SNL) in rats is one of the most popular models for studying neuropathic pain because of its high reproducibility. During the surgery, a part of the L5 paraspinal muscle is usually removed, which produces extra trauma and may potentially affect the physiological processes involved in neuropathic pain. To reduce the surgical trauma, the paraspinal muscle retraction was developed for exposure of the spinal nerve. The current study was aimed at comparing the surgical invasions between the L5 SNL models with paraspinal muscle removal or retraction. The results showed that both methods induced similar neuropathic pain behavior. However, the paraspinal muscle retraction group exhibited an average of 2.7 mg less blood loss than the muscle removal group. This group also showed a significantly lower increase in serum myoglobin and creatine phosphokinase levels on postoperative days 1 and 2, as well as a lower increase in interleukin-1ß and interleukin-6 levels on postoperative day 1. The paraspinal muscle maintained normal morphological features following paraspinal muscle retraction. Our results indicate that the SNL rat model with paraspinal muscle retraction is a reliable physiological model that is reproducible, readily available, and less invasive than the model with muscle removal.

Dihydromethysticin kavalactone induces apoptosis in osteosarcoma cells through modulation of PI3K/Akt pathway, disruption of mitochondrial membrane potential and inducing cell cycle arrest.

The objective of the present study was to evaluate the tumor and apoptotic effects of dihydromethysticin kavalactone against human osteosarcoma (MG-63) cells. Antiproliferative activity was measured with the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Apoptosis induction by dihydromethysticin was demonstrated by fluorescence microscopy, quantitative videomicroscopy and Annexin V-FITC apoptosis detection kit. Mitochondrial membrane potential disruption was demonstrated by rhodamine-123 dye using flow cytometry. We also evaluated the effect of dihydromethysticin on PI3K/Akt pathway with an immunoblotting analysis. The results showed that the compound induced dose-dependent as well as time-dependent antiproliferative effects against MG-63 cell growth. Cell death and apoptotic body formation was noticed followed dihydromethysticin treatment at various doses. The percentage of apoptotic cells (early apoptosis+late apoptosis) increased from 6.63% in untreated control to 23.92%, 23.81% and 93.9% in 25 µM, 75 µM and 100 µ Mdihydromethysticin-treated cells respectively. Flow cytometric analysis showed dihydromethysticin induced an increase in G0/G1 cells (apoptotic cells). Furthermore, we observed mitochondrial transmembrane depolarization along with decreased phosphorylation levels for PI3K, AKT (Ser 473), AKT (Thr 308), GSK-3ß, and BAD. These reductions were associated with down regulation of AKT and upregulation of both GSK-3ß and BAD.

The femoral neck safe zone: a radiographic simulation study to prevent cortical perforation with multiple screw insertion.

OBJECTIVES: To calculate the probability of iatrogenic perforation when screws seem to be safe on radiographs. A risk zone (RZ) gradient is mapped to help surgeons determine the suitable screw positions. METHODS: Using computed tomography data and image-processing software, 24 proximal femurs were reconstructed. The anteroposterior, lateral, and axial views were then simulated, and the safe zone and RZ were identified and calculated on the axial graphs. Each original axial graph was zoomed and compiled to match a calculated average image, and a gradient figure of the RZs was visualized. RESULTS: All 24 femoral necks had cortical perforation RZs. The average risk percentage was 23.7%. The individual risk per quadrant was as follows: anterosuperior 2.5%, posteroinferior 3.8%, posterosuperior 6.7%, and anteroinferior 10.7%. Four safe and cortex-touching zones and a safe region were identified in femoral neck for 6.5-mm screws. CONCLUSIONS: Surgeons should be wary of screws that appear close to the cortex on both radiographs, especially in the posterosuperior and anteroinferior quadrants, because such screws probably perforate the cortex. To minimize iatrogenic perforation, screw position should be assessed using a gradient figure of the RZs.

Double crush syndrome due to plating of humeral shaft fracture.

Median nerve injury is rarely associated with the humeral shaft fracture. A Sixty two year old woman with a displaced humeral shaft fracture, developed a symptomatic carpal tunnel syndrome after plating with a screw protruding medially. 16 months later, the implants were removed and the symptoms gradually improved without carpal tunnel release surgery. A double crush syndrome resulted due to the proximal compression by the medially protruding screw and the distal compression by carpal tunnel. The proximal decompression produced by removal of the screw led to relief of the symptoms.

Anatomy and biomechanical properties of the plantar aponeurosis: a cadaveric study.

OBJECTIVES: To explore the anatomy of the plantar aponeurosis (PA) and its biomechanical effects on the first metatarsophalangeal (MTP) joint and foot arch. METHODS: Anatomic parameters (length, width and thickness of each central PA bundle and the main body of the central part) were measured in 8 cadaveric specimens. The ratios of the length and width of each bundle to the length and width of the central part were used to describe these bundles. Six cadaveric specimens were used to measure the range of motion of the first MTP joint before and after releasing the first bundle of the PA. Another 6 specimens were used to evaluate simulated static weight-bearing. Changes in foot arch height and plantar pressure were measured before and after dividing the first bundle. RESULTS: The average width and thickness of the origin of the central part at the calcaneal tubercle were 15.45 mm and 2.79 mm respectively. The ratio of the length of each bundle to the length of the central part was (from medial to lateral) 0.29, 0.30, 0.28, 0.25, and 0.27, respectively. Similarly, the ratio of the widths was 0.26, 0.25, 0.23, 0.19 and 0.17. The thickness of each bundle at the bifurcation of the PA into bundles was (from medial to lateral) 1.26 mm, 1.04 mm, 0.91 mm, 0.84 mm and 0.72 mm. The average dorsiflexion of the first MTP joint increased 10.16° after the first bundle was divided. Marked acute changes in the foot arch height and the plantar pressure were not observed after division. CONCLUSIONS: The first PA bundle was not the longest, widest, or the thickest bundle. Releasing the first bundle increased the range of motion of the first MTP joint, but did not acutely change foot arch height or plantar pressure during static load testing.

Distally based perforator propeller sural flap for foot and ankle reconstruction: a modified flap dissection technique.

BACKGROUND: Distally based perforator propeller sural flaps that pedicled on an isolated perforator from the peroneal artery or posterior tibial artery are a versatile local reconstructive option for defects of the foot and ankle region. However, flap venous congestion is yet a difficult problem after operation. We hypothesize that containing some adipofascial tissues around the axial perforator can preserve some tiny venous return routes, improve venous drainage, and ultimately enhance flap safety in distally based sural flaps. METHODS: A prospective case series of 12 patients undergoing distally based perforator sural flaps for foot and ankle coverage were included in this study from January 2008 to December 2010. There were 7 posterior tibial artery perforator flaps from the posteromedial sural region and 5 peroneal artery perforator flaps from the posterolateral sural region. After identifying the proper viable perforator during operation as the pivot point, the whole flap was designed in an eccentric propeller shape. The proximal larger blade was a fasciocutaneous flap, whereas the distal smaller blade was a subdermal vascular plexus flap, preserving at least a quarter area of adipofascial tissue intact around the perforator. Postoperatively, flap swelling was classified into a 5-grade assessment scale. Flap survival, complications, and patient functional recovery were evaluated. RESULTS: The proximal fasciocutaneous flap measured 4 × 8 to 6 × 18 cm (mean, 57.8 cm), and the distal subdermal cutaneous flap measured 2 × 2 to 4 × 4 cm (mean, 9.2 cm). The flaps were rotated 160 to 180 degrees. Postoperatively, flap swelling was noted under grade 2 in 9 cases, grade 3 in 2, and grade 4 in 1 with some distal superficial skin necrosis, which occurred in the largest flap in our series. All flaps survived uneventfully. After a mean of 13 months of follow-up, the wounds were cured successfully. All patients recovered walking and shoe wearing function. CONCLUSION: Keeping a quadrant adipofascial tissue around the distal pivot perforator to form a perforator-adipofascial-pedicle can preserve more venous return routes and relieve flap swelling. This technique should be recommended in distally perforator-pedicled propeller flaps because it enhances flap safety yet does not increase the difficulty of 180-degree rotation.

Posterior coronal plating of bicondylar tibial plateau fractures through posteromedial and anterolateral approaches in a healthy floating supine position.

Bicondylar tibial plateau fractures pose a significant challenge for treating surgeons. If the articular surface of the medial plateau has a second split component in the posterior coronal plane, it is difficult to get direct visualization and ensure plate fixation when the patient is in the supine position. Using a technique in which a single preparation and draping of both legs is needed, patients were operated on using a healthy floating supine position maneuver through dual posteromedial and anterolateral incisions and triple plate fixations. By flexing and adducting the contralateral healthy hip over the injured leg, more lateral rotation of the fractured knee can be achieved, providing better access and visualization of the posterior medial plateau using a posteromedial gastrocnemius approach.

Undeveloped semiconic posterosuperior ligament and susceptibility to avulsion of the C-7 spinal nerve in Erb palsy.

OBJECT: In Erb palsy, the C-7 spinal nerve has been found to be more subject to avulsion than the C-5 and C-6 spinal nerves. This study investigated the morphological and biomechanical characteristics of the semiconic posterosuperior ligaments (SPLs) at the C-5, C-6, and C-7 spinal nerves in neonates. METHODS: Twenty-four brachial plexuses from 12 fresh neonate cadavers were used in this study. In 12 brachial plexuses from 6 cadavers, the following studies were performed with respect to the SPLs at the C-5, C-6, and C-7 spinal nerves: gross observation of morphological and histological characteristics; measurement of length, thickness, and width; and a semiquantitative analysis of collagen. In the other 6 cadavers, biomechanical tension testing was performed bilaterally on the C5-7 SPLs to assess the tensile strength of the ligaments. RESULTS: The C5-7 spinal nerves are fixed to the transverse process through the SPL, a structure not observed at the C-8 and T-1 spinal nerves. Except for the width of the SPL insertion on the spinal nerve, which was found to increase gradually from C-5 to C-7, there was no statistically significant difference in the dimensions of the C-5, C-6, and C-7 SPLs. The sectional area percentage of collagen was 51% ± 10% in SPLs for C-5, 51% ± 11% for C-6, and 41% ± 10% for C-7; and this percentage was significantly lower in SPLs for C-7 than for C-5 or C-6 (1-way ANOVA, F = 4.3, p = 0.02; Tukey honestly significant difference test, p = 0.04 and 0.04, respectively). Sharpey fibers were observed at the transverse process origin of the SPL at C-5 and C-6 but not at C-7. Biomechanical tension testing showed that the mean failure load was 6.6 ± 0.9 N for the C-5 SPL, 6.4 ± 1.0 N for the C-6 SPL, and 5.4 ± 0.9 N for the C-7 SPL, and the failure load was significantly lower in SPLs at C-7 than in those at C-5 or C-6 (1-way ANOVA, F = 5.1, p = 0.01; Tukey honestly significant difference, p = 0.01 and 0.048, respectively). Nine of 12 C-7 SPLs failed at their origin from the transverse process, while only 4 of 12 C-5 SPLs and 3 of 12 C-6 SPLs failed at the origin site. CONCLUSIONS: These findings suggest that the lower density of collagen and absence of Sharpey fibers decrease the biomechanical properties of the C-7 SPL, and this may account for the higher frequency of avulsion of the C-7 spinal nerve (in comparison with the C-5 or C-6 nerve) in Erb palsy.