A novel method for identifying aerobic granular sludge state using sorting, densification and clarification dynamics during the settling process.

Aerobic granular sludge is one of the most promising biological wastewater treatment technologies, yet maintaining its stability is still a challenge for its application, and predicting the state of the granules is essential in addressing this issue. This study explored the potential of dynamic texture entropy, derived from settling images, as a predictive tool for the state of granular sludge. Three processes, traditional thickening, often overlooked clarification, and innovative particle sorting, were used to capture the complexity and diversity of granules. It was found that rapid sorting during settling indicates stable granules, which helps to identify the state of granules. Furthermore, a relationship between sorting time and granule heterogeneity was identified, helping to adjust selection pressure. Features of the dynamic texture entropy well correlated with the respirogram, i.e., R2 were 0.86 and 0.91 for the specific endogenous respiration rate (SOURe) and the specific quasi-endogenous respiration rate (SOURq), respectively, providing a biologically based approach for monitoring the state of granules. The classification accuracy of models using features of dynamic texture entropy as an input was greater than 0.90, significantly higher than the input of conventional features, demonstrating the significant advantage of this approach. These findings contributed to developing robust monitoring tools that facilitate the maintenance of stable granular sludge operations.

γ-Cyclodextrin metal-organic frameworks as the promising carrier for pulmonary delivery of cyclosporine A.

γ-Cyclodextrin metal-organic frameworks (CD-MOFs) are considered as a green and biocompatible material with great potential in drug delivery systems. Original CD-MOFs show the poor aerosol properties, which limit the application in pulmonary drug delivery. To improve the in vitro deposition properties, herein, we synthesized CD-MOFs by the vapor diffusion method using a series of modulators to achieve better pulmonary delivery of cyclosporine A (CsA). The results showed that blank CD-MOFs and drug loaded CD-MOFs prepared with different modulators all preserved the cubical shape, and exhibited the similar crystal form, structural characteristics, thermal behaviors and release properties. In addition, drug loaded CD-MOFs prepared with polyethylene glycol 10000 (PEG 10000) as a modulator exhibited better in vitro aerosol performance than those of synthesized using other modulators, and the in vivo pharmacokinetics data demonstrated that the bioavailability of CsA could be significantly enhanced by inhalation administration of drug loaded CD-MOFs compared with oral administration of Neoral®. The repeated dose inhalation toxicity also confirmed the fine biocompatibility of CD-MOFs as the carrier for pulmonary drug delivery. Therefore, the results demonstrated CD-MOFs as the promising carrier could be used for pulmonary drug delivery.

Development of Large Hollow Particles for Pulmonary Delivery of Cyclosporine A.

The purpose of this study was to prepare large hollow particles (LHPs) by spray drying for pulmonary delivery of cyclosporine A (CsA), using L-Leucine (LEU) and hydroxypropyl methylcellulose (HPMC) as excipients and ammonium bicarbonate (AB) as a porogen. The prepared LHPs were spherical particles composed of both CsA and LEU on the surface and HPMC on the inner layer. The formulation of CsA-LEU-0.8HPMC-AB as typical LHPs showed excellent in vitro aerodynamic performance with a minimum mass median aerodynamic diameter (MMAD) of 1.15 µm. The solubility of CsA-LEU-0.8HPMC-AB was about 5.5-fold higher than that of raw CsA, and the dissolution of CsA-LEU-0.8HPMC-AB suggested that the drug was released within 1 h. The cell viability of the A549 cell line showed that CsA-LEU-0.8HPMC-AB was safe for delivering CsA to the lungs. In addition, inhalation administration of CsA-LEU-0.8HPMC-AB with the Cmax and AUC0-∞ increasing by about 2-fold and 2.8-fold compared with the oral administration of Neoral® could achieve therapeutic drug concentrations with lower systemic exposure and significantly improve the in vivo bioavailability of CsA. From these findings, the LHPs, with the advantage of avoiding alveolar macrophage clearance, could be a viable choice for delivering CsA by inhalation administration relative to oral administration.

Cyclosporine A-loaded chitosan extra-fine particles for deep pulmonary drug delivery: In vitro and in vivo evaluation.

In this study, the extra-fine dry powder inhalers (DPIs) with chitosan (CS) as carrier were successfully prepared by ionic gel method combined with spray drying technique for deep pulmonary drug delivery of Cyclosporine A (CsA), using sodium hyaluronate (SHA) and sodium polyglutamate (SPGA) as polyanions. The CsA-loaded DPIs of CS-SHA-CsA and CS-SPGA-CsA were spherical particles with wrinkles on the surface, which were more conducive to improving the aerosol properties. The aerodynamic evaluation of CS-SHA-CsA and CS-SPGA-CsA showed that the fine particle fraction (FPF) reached up to 79.22 ± 2.12% and 81.55 ± 0.43%, while the emitted fraction (EF) reached 77.15 ± 1.46% and 78.29 ± 2.10%. In addition, the mass median aerodynamic diameter (MMAD) was calculated as 1.58 ± 0.04 µm and 1.94 ± 0.02 µm for CS-SHA-CsA and CS-SPGA-CsA, indicating that they were all extra-fine particles (d < 2 µm). These in vitro aerodynamic results showed that CS-SHA-CsA and CS-SPGA-CsA could reach the smaller airways, further improving therapeutic efficiency. The cell viability on A549 cell line results showed that CS-SHA-CsA and CS-SPGA-CsA were safe to deliver CsA to lungs. The in vivo pharmacokinetics consequence proved that inhalation administration of CS-SHA-CsA and CS-SPGA-CsA could significantly improve the bioavailability of CsA in vivo compared with oral administration of Neoral®, effectively reducing the risk of a series of adverse effects caused by systemic overexposure. In addition, the safety and compatibility of DPIs using SHA, SPGA, and CS as carriers for pulmonary drug delivery was verified by in vivo repeated dose inhalation toxicity. From these findings, the extra-fine DPIs with CS as carrier could be a viable delivery option for the deep pulmonary drug delivery of CsA relative to orally administered drug.

[Rapid and simultaneous determination of two immunosuppressants in whole blood by high performance liquid chromatography].

Cyclosporine A and sirolimus are immunosuppressants that are widely used in many organ transplantation procedures. They exhibit some complementary mechanisms of action and interact synergistically when used together. However， they are critical-dose drugs and have a narrow therapeutic index. They provide the desired therapeutic effect with acceptable tolerability only within a specific range of blood concentrations. Therefore， the rapid and simultaneous detection of the concentrations of cyclosporine A and sirolimus in whole blood could provide valuable information on planning medicine administration after organ transplantations. In this study， firstly， the chromatographic behaviors of cyclosporine A and sirolimus on a biological liquid chromatography （BioLC） column and traditional liquid chromatography （TraLC） columns were investigated systematically under the same chromatographic conditions. The results suggested that the peak height and peak width of cyclosporine A and sirolimus on the BioLC column， ZORBAX 300SB C8 （250 mm×4.6 mm， 5.0 µm）， were the highest and narrowest， respectively. The number of theoretical plates of cyclosporine A and sirolimus on the ZORBAX 300SB C8 column increased significantly when the volume ratio of acetonitrile in the mobile phases was greater than 70%. Their retention time on the BioLC and TraLC columns was negligibly affected by the use of formic acid and trifluoroacetic acid as the mobile phases. In the range of the experimental column temperature， the number of theoretical plates of cyclosporine A and sirolimus on the ZORBAX 300SB C8 column was significantly higher than that on the two TraLC columns. Furthermore， the relationship between the retention factor and column temperature of cyclosporine A on the ZORBAX 300SB C8 column was different from that on the two TraLC columns. Subsequently， a high performance liquid chromatography method based on the ZORBAX 300SB C8 column was established for the rapid separation and determination of cyclosporin A and sirolimus in whole blood. A sample of whole blood with a volume of 50 µL was prepared by protein precipitation with 1 mol/L sodium hydroxide and then extracted into 500 µL of ether-methanol （95∶5， v/v）. After centrifugation at 14000 r/min for 10 min， the organic layer was removed and evaporated under a stream of nitrogen at 50 ℃. The residue was then reconstituted in 200 µL of methanol for use. Cyclosporin A and sirolimus were separated through isocratic elution on the ZORBAX 300SB C8 column. The column temperature was set at 60 ℃. The mobile phase was acetonitrile-water （70∶30， v/v） and the flow rate was 1.0 mL/min. The detection wavelengths were 205 nm for cyclosporine A and 278 nm for sirolimus. The injection volume was 20 µL. The external standard method was used to quantify cyclosporine A and sirolimus. Under the optimized conditions， cyclosporine A and sirolimus were well-separated within 6 min with a resolution of 3.7 at 205 nm. In addition， the endogenous substances in whole blood negligibly interfered in the detection of sirolimus， while two endogenous substances slightly affected the detection of cyclosporine A. Cyclosporine A and sirolimus both showed good linear relationships in their respective concentration （r>0.997）. The limits of detection （LODs） of cyclosporine A and sirolimus were respectively calculated to be 10 ng/mL and 1 ng/mL based on a signal-to-noise ratio of 3， and the limits of quantification （LOQs） were 30 ng/mL and 2 ng/mL based on a signal-to-noise ratio of 10. In the whole blood samples， the recoveries of cyclosporine A and sirolimus at three spiked levels were in the ranges of 83.5%-89.7% and 95.8%-97.8% with relative standard deviations （RSDs） of 3.2%-9.0% and 3.4%-6.7% （n=5）， respectively. The established method is simple in operation， can be performed with a simple mobile phase， has a short analysis time， and provides a wide linear range and high sensitivity； hence， it can be applied to the determination of cyclosporine A and sirolimus in whole blood.

[Separation of budesonide enantiomers with amylose-tris-[(S)-1-phenylethyl carbamate] chiral stationary phase and determination of its contents in pharmaceutical preparations].

The drug budesonide exists as 22R and 22S enantiomers. However, the drug activity of 22R-budesonide is 2-3 times stronger than that of 22S-budesonide. The development of enantiomeric separation and quantitative analysis methods for budesonide can provide an important basis for its drug development and quality control. At present, the enantiomers of budesonide are separated on a reversed C18 solid phase column. However, chiral stationary phases are rarely reported for the separation of the enantiomers of budesonide. In this study, a high performance liquid chromatography (HPLC) method with a chiral stationary phase was developed for the rapid separation and determination of budesonide enantiomers. The effects of the type of chiral stationary phase, mobile phase additives, and column temperature on the resolution of the budesonide enantiomers were also investigated. The results showed that the chiral stationary phase amylose-tris-[(S)-1-phenylethyl carbamate] was more suitable for the separation of budesonide enantiomers. The mobile phase additives used in the experiment had no significant effect on the chromatographic parameters (peak height, peak width, and resolution) of the budesonide enantiomers. However, with an increase in the column temperature, the peak width of the budesonide enantiomers decreased, while the peak height and resolution increased. The optimized HPLC conditions were as follows: column, Chiralpak AS-RH (150 mm×4.6 mm, 5.0 µm); mobile phase, acetonitrile-water (45∶55, v/v); column temperature, 40 ℃; flow rate, 1.0 mL/min; detector, diode array detector (DAD); detection wavelength, 246 nm; injection volume, 10 µL. The external standard method was used to quantify the budesonide enantiomers. Under the optimized conditions, the enantiomers were well separated, and the retention times of 22R-budesonide and 22S-budesonide were 6.40 min and 7.77 min, respectively. The resolution of the enantiomers was 4.64. The linear ranges of 22R-budesonide and 22S-budesonide were 0.16-1000 µg/mL and 0.20-1000 µg/mL, respectively. The peak area of the enantiomers showed a good linear relationship with the corresponding concentration, and the correlation coefficients (R2) were 0.9999. The limits of detection (LODs) of 22R-budesonide and 22S-budesonide were 0.05 µg/mL and 0.07 µg/mL, respectively, based on a signal-to-noise ratio of 3. The limits of quantification (LOQs) were calculated to be 0.16 µg/mL and 0.20 µg/mL, respectively, based on a signal-to-noise ratio of 10. The recoveries at four spiked levels were in the range of 102.63% to 104.17%, with the relative standard deviations (RSDs) of 0.08% to 0.57% (n=6). The budesonide solution was stored in dark at 4 ℃ for 24 h, and no obvious degradation was observed. Finally, the method was applied to determine four actual samples of budesonide suspension for inhalation in a batch. The samples were dissolved in methanol, filtered through a 0.45 µm microporous membrane, and then analyzed. The amounts of 22R-budesonide and 22S-budesonide in the samples were in the ranges of 283.15-284.63 µg/mL and 259.86-261.51 µg/mL, respectively. This method is simple and rapid, in addition to having good repeatability and high accuracy. It can be used for the resolution of budesonide enantiomers and for quality control in budesonide preparations.

[Simultaneous determination of three quaternary ammonium muscle relaxants in blood by high performance liquid chromatography-tandem mass spectrometry].

Vecuronium, rocuronium, and pancuronium are widely used as non-depolarizing muscle relaxants. There have been occasional cases of allergic reactions and even death when using such muscle relaxants. Rapid determination of the concentration of these muscle relaxants in blood can provide valuable information for early clinical diagnosis. As quaternary ammonium compounds, these muscle relaxants are highly polar. Hence, they cannot be retained effectively on reversed-phase chromatographic columns with conventional mobile phases. These quaternary ammonium muscle relaxants are mainly separated by ion-pair chromatography. Using an ion-pairing reagent can help improve the retention capabilities of quaternary ammonium muscle relaxants. Nevertheless, the sensitivity of MS detection is significantly decreased because of ionic inhibition caused by the ion-pairing reagent in the mobile phase. Furthermore, ion-pairing reagents can pollute the MS system. A method based on high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established for the simultaneous determination of the three quaternary ammonium muscle relaxants in blood. The blood samples were diluted and subjected to high-speed centrifugation. The supernatant was purified on a Bond Elut AL-N solid phase extraction column and then filtered through a 0.45 µm microporous membrane. The quaternary ammonium muscle relaxants were separated on a ZIC-cHILIC analytical column (50 mm×2.1 mm, 3.0 µm) with gradient elution. Acetonitrile and 0.1% formic acid aqueous solution were used as mobile phases. The separated compounds were analyzed by tandem MS with an electrospray ionization (ESI) source in positive and multiple reaction monitoring (MRM) modes. The matrix effects of vecuronium, rocuronium, and pancuronium in blood were 88.1% to 95.4%. The calibration curves for vecuronium, rocuronium, and pancuronium showed good linear relationships in each range, and all correlation coefficients (R2) were > 0.996. The limits of detection of vecuronium, rocuronium, and pancuronium were 0.2-0.8 ng/mL, with the corresponding limits of quantification being 0.5-2.0 ng/mL. The recoveries of vecuronium, rocuronium, and pancuronium were 92.8% to 110.6%, with relative standard deviations (RSDs) of 3.2%-9.4%. This method is sensitive, accurate, and easy to operate, and it can be used to rapidly determine vecuronium, rocuronium, and pancuronium in blood.

An in vitro study on the antitumor effect of sonodynamic therapy using sinoporphyrin sodium on human glioblastoma cells.

Sonodynamic therapy (SDT) is a promising modality for cancer treatment. Sinoporphyrin sodium (DVDMS), purified from Photofrin II, shows great potential in SDT evidenced by growing studies. The purpose of the current study was to investigate the antitumor effect of SDT combined with DVDMS on human glioblastoma (U87 MG) cell line in vitro. The cellular uptake of DVDMS was investigated by confocal microscopy and IVIS spectrum imaging system. In addition, DVDMS toxicity and anti-tumor effect of SDT were assessed by flow cytometry. The generation of intracellular reactive oxygen species (ROS) was determined using DCFH-DA staining. Simultaneously, fluorescence microscopy was performed to access the destabilization of mitochondrial membrane potential (MMP). The results showed that DVDMS could easily enter the cells and accumulated in the cytoplasm, especially the mitochondria. And the intracellular DVDMS increased with incubation time or concentrations. The results also showed remarkable cytotoxicity of DVDMS-mediated SDT (center frequency: 0.970 MHz; peak-rarefactional pressure: 0.52-MPa; acoustic power: 0.32 W; pulse repetition frequency: 1 Hz; duty cycle: 1-30%; duration: 3 min) on U87 MG cells, while DVDMS alone was non-toxic to the cells. In comparison with the control group, the SDT-treated group showed significant generation of intracellular ROS and loss of MMP at 1 h post-treatment. These results indicated that DVDMS-mediated SDT could induce great cytotoxicity in U87 MG cells via the production of ROS and showed potentials in the treatment for glioblastoma.

Sonodynamic Therapy on Intracranial Glioblastoma Xenografts Using Sinoporphyrin Sodium Delivered by Ultrasound with Microbubbles.

Sonodynamic therapy (SDT) is a promising noninvasive method for cancer treatment. The anti-tumor effect of sinoporphyrin sodium (DVDMS)-mediated SDT on nude mice bearing intracranial U87 MG-Red-FLuc human glioblastoma was investigated. Focused ultrasound (FUS) with microbubbles (MBs) was utilized to open the blood-brain barrier for enhancing the delivery of the sonosensitizer DVDMS to the brain tumor first, and then the SDT treatment was performed. The in vitro study showed obvious cytotoxicity of DVDMS-mediated SDT (center frequency: 0.996 MHz, acoustic power: 1.7 W, pulse repletion frequency: 1 Hz, duty cycle: 30%, duration: 1 min) on U87 MG-Red-FLuc cells. The results indicated that more DVDMS accumulation in the tumor sites was induced by FUS with MBs by 3.43 folds of unsonicated ones. Longitudinal bioluminescence imaging illustrated that the intracranial glioblastoma progression in nude mice treated with SDT was retarded compared to the untreated group. The median survival time was prolonged to 30.25 days after SDT treatment by 27.37%. The anti-proliferation effect and cell apoptosis induction was further confirmed by immunohistochemical examinations. These results of the study suggested that SDT using the sonosensitizer DVDMS delivered by FUS with MBs may provide a new promising therapeutic strategy against glioblastoma.

Effects of bisoprolol in combination with trimetazidine on the treatment of heart failure and concomitant chronic obstructive pulmonary disease.

OBJECTIVE: To evaluate the effects of bisoprolol combined with trimetazidine on the treatment of heart failure patients having concomitant chronic obstructive pulmonary disease (COPD); in comparison with control group treated with standard therapy only. METHODS: A total of 120 heart failure patients having concomitant COPD were selected and randomly divided into a control group and a treatment group according to different treatment methods (n=60). The control group was given continuous low flow oxygen inhalation and inotropic agents, and their cardiac stress was also reduced. The treatment group was treated with bisoprolol fumarate and trimetazidine in addition to treatment for COPD. For all patients, blood gas analysis and parameters reflecting cardiac function were measured respectively before and after treatment. The respiratory symptoms (cough, sputum, polypnea, gasp, dyspnea), limitation of motion (daily life, household duties, entertainment, sports), disease impacts (social contact, emotion, anxiety) and St. George's Respiratory Questionnaire (SGRQ) total scores were observed using SGRQ. RESULTS: The oxygen partial pressure (PaO2) and partial pressure of carbon dioxide (PaCO2) of the treatment group after treatment were significantly different from those before treatment. After treatment, peak E, E/A and IVEF were increased by 41%, 44% and 16% respectively, but peak A, LVPWT/mm and IVST/mm were significantly reduced. The differences in the respiratory symptoms, limitation of motion, disease impacts and SGRQ total scores were statistically significant compared with those before treatment (P<0.05) and those of the control group (P<0.05). CONCLUSION: Combining bisoprolol with trimetazidine in the treatment of heart failure complicating COPD can effectively improve blood gas indices, left ventricular systolic and diastolic functions and the quality of life, thereby alleviating clinical symptoms.