Degradation and biocompatibility of photoembossed PLGA-acrylate blend for improved cell adhesion.

We have shown previously that PMMA-acrylate photopolymers are biocomopatible and can exhibit improved cell adhesion compared to PMMA, due to an increase in negative surface charge caused by UV radiation PLGA has been used widely in soft tissue regeneration due to its high biocompatibility and cell adhesion. This polymer is also biodegradable and can be utilised in the field of vascular regeneration. In this study, PLGA is blended with a triacrylate monomer (TPETA) to create a degradable photopolymer blend. Surface relief structures are formed on this PLGA-TPETA by photoembossing. An optimum height of 950 nm was achieved for a 10 µm pitch with the height of these relief structures being controlled by changing UV intensity, processing temperature and time. Degradation studies of this blend revealed a bulk degradation mechanism with PLGA-TPETA degrading slower compared to pure PLGA. We also evaluated the adhesion of human umbilical vein endothelial cells (HUVECs) on both smooth and textured PLGA-TPETA films. Embossed PLGA-TPETA films showed improved cell adhesion compared to smooth substrates. Furthermore, HUVECs proliferated faster on the embossed surface compared to their smooth counterparts. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 163-171, 2018.

Human embryonic stem cell dispersion in electrospun PCL fiber scaffolds by coating with laminin-521 and E-cadherin-Fc.

Advances in human pluripotent cell cultivation and differentiation protocols have led to production of stem cell-derived progenitors as a promising cell source for replacement therapy. Three-dimensional (3-D) culture is a better mimic of the natural niche for stem cells and is widely used for disease modeling. Here, we describe a nonaggregate culture system of human embryonic stem cells inside electrospun polycaprolactone (PCL) fiber scaffolds combined with defined extracellular proteins naturally occurring in the stem cell niche. PCL fiber scaffolds coated with recombinant human laminin-521 readily supported initial stem cell attachment and growth from a single-cell suspension. The combination of recombinant E-cadherin-Fc and laminin-521 further improved cell dispersion rendering a uniform cell population. Finally, we showed that the cells cultured in E-cadherin-Fc- and laminin-521-coated PCL scaffolds could differentiate into all three germ layers. Importantly, we provided a chemically defined 3-D system in which pluripotent stem cells grown and differentiated avoiding the formation of cell aggregates. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1226-1236, 2018.

Responses of Vascular Endothelial Cells to Photoembossed Topographies on Poly(Methyl Methacrylate) Films.

Failures of vascular grafts are normally caused by the lack of a durable and adherent endothelium covering the graft which leads to thrombus and neointima formation. A promising approach to overcome these issues is to create a functional, quiescent monolayer of endothelial cells on the surface of implants. The present study reports for the first time on the use of photoembossing as a technique to create polymer films with different topographical features for improved cell interaction in biomedical applications. For this, a photopolymer is created by mixing poly(methyl methacrylate) (PMMA) and trimethylolpropane ethoxylate triacrylate (TPETA) at a 1:1 ratio. This photopolymer demonstrated an improvement in biocompatibility over PMMA which is already known to be biocompatible and has been extensively used in the biomedical field. Additionally, photoembossed films showed significantly improved cell attachment and proliferation compared to their non-embossed counterparts. Surface texturing consisted of grooves of different pitches (6, 10, and 20 µm) and heights (1 µm and 2.5 µm). The 20 µm pitch photoembossed films significantly accelerated cell migration in a wound-healing assay, while films with a 6 µm pitch inhibited cells from detaching. Additionally, the relief structure obtained by photoembossing also changed the surface wettability of the substrates. Photoembossed PMMA-TPETA systems benefited from this change as it improved their water contact angle to around 70°, making it well suited for cell adhesion.

Photoembossing of surface relief structures in polymer films for biomedical applications.

Photoembossing is a technique used to create relief structures using a patterned contact photo-mask exposure and a thermal development step. Typically, the photopolymer consists of a polymer binder and a monomer in a 1/1 ratio together with a photo-initiator, which results in a solid and non-tacky material at room temperature. Here, new mixtures for photoembossing are presented which are potentially biocompatible. Poly(methyl methacrylate) is used as a polymer binder and two different acrylate monomers trimethylolpropane ethoxylate triacrylate (TPETA) and dipentaerythritol penta-/hexa-acrylate (DPPHA) are tested. PMMA-TPETA had a higher surface relief features. Biocompatibility is evaluated by culturing human umbilical vein endothelial cells (HUVECs) on films of these photopolymer blends. PMMA with TPETA and PMMA-DPPHA films showed enhanced cell adhesion compared to PMMA. The cells also showed alignment on surface textured films with the highest degree of alignment on films with 20 µm pitch and 2 µm height. This study shows that photoembossing is a feasible method to produce surface textures on films that can be adopted in the field of tissue engineering to promote cell adhesion and alignment.