2D Tungsten Borides Induced Interfacial Modulation Engineering Toward High-Rate Performance Zinc-Iodine Battery.

Aqueous zinc-iodine batteries are promising candidates for large-scale energy storage due to their high energy density and low cost. However, their development is hindered by several drawbacks, including zinc dendrites, anode corrosion, and the shuttle of polyiodides. Here, the design of 2D-shaped tungsten boride nanosheets with abundant borophene subunits-based active sites is reported to guide the (002) plane-dominated deposition of zinc while suppressing side reactions, which facilitates interfacial nucleation and uniform growth of zinc. Meanwhile, the interfacial d-band orbits of tungsten sites can further enhance the anchoring of polyiodides on the surface, to promote the electrocatalytic redox conversion of iodine. The resulting tungsten boride-based I2 cathodes in zinc-iodine cells exhibit impressive cyclic stability after 5000 cycles at 50 C, which accelerates the practical applications of zinc-iodine batteries.

Fundamentally Manipulating the Electronic Structure of Polar Bifunctional Catalysts for Lithium-Sulfur Batteries: Heterojunction Design versus Doping Engineering.

Heterogeneous structures and doping strategies have been intensively used to manipulate the catalytic conversion of polysulfides to enhance reaction kinetics and suppress the shuttle effect in lithium-sulfur (Li-S) batteries. However, understanding how to select suitable strategies for engineering the electronic structure of polar catalysts is lacking. Here, a comparative investigation between heterogeneous structures and doping strategies is conducted to assess their impact on the modulation of the electronic structures and their effectiveness in catalyzing the conversion of polysulfides. These findings reveal that Co0.125Zn0.875Se, with metal-cation dopants, exhibits superior performance compared to CoSe2/ZnSe heterogeneous structures. The incorporation of low Co2+ dopants induces the subtle lattice strain in Co0.125Zn0.875Se, resulting in the increased exposure of active sites. As a result, Co0.125Zn0.875Se demonstrates enhanced electron accumulation on surface Se sites, improved charge carrier mobility, and optimized both p-band and d-band centers. The Li-S cells employing Co0.125Zn0.875Se catalyst demonstrate significantly improved capacity (1261.3 mAh g-1 at 0.5 C) and cycle stability (0.048% capacity delay rate within 1000 cycles at 2 C). This study provides valuable guidance for the modulation of the electronic structure of typical polar catalysts, serving as a design directive to tailor the catalytic activity of advanced Li-S catalysts.

Interfacial "Double-Terminal Binding Sites" Catalysts Synergistically Boosting the Electrocatalytic Li2S Redox for Durable Lithium-Sulfur Batteries.

Catalytic conversion of polysulfides emerges as a promising approach to improve the kinetics and mitigate polysulfide shuttling in lithium-sulfur (Li-S) batteries, especially under conditions of high sulfur loading and lean electrolyte. Herein, we present a separator architecture that incorporates double-terminal binding (DTB) sites within a nitrogen-doped carbon framework, consisting of polar Co0.85Se and Co clusters (Co/Co0.85Se@NC), to enhance the durability of Li-S batteries. The uniformly dispersed clusters of polar Co0.85Se and Co offer abundant active sites for lithium polysulfides (LiPSs), enabling efficient LiPS conversion while also serving as anchors through a combination of chemical interactions. Density functional theory calculations, along with in situ Raman and X-ray diffraction characterizations, reveal that the DTB effect strengthens the binding energy to polysulfides and lowers the energy barriers of polysulfide redox reactions. Li-S batteries utilizing the Co/Co0.85Se@NC-modified separator demonstrate exceptional cycling stability (0.042% per cycle over 1000 cycles at 2 C) and rate capability (849 mAh g-1 at 3 C), as well as deliver an impressive areal capacity of 10.0 mAh cm-2 even in challenging conditions with a high sulfur loading (10.7 mg cm-2) and lean electrolyte environments (5.8 µL mg-1). The DTB site strategy offers valuable insights into the development of high-performance Li-S batteries.

The impact of sprint, middle-distance, and long-distance orienteering races on perceived mental fatigue in national level orienteers.

Experiencing mental fatigue (MF) before an orienteering race can lead to a slower completion time. This study aimed to explore the changes in perceived MF, mood and other psychological responses during an orienteering competition. Sixteen national level orienteering athletes (20.8 ± 4.9 years) provided informed consent and completed the online surveys, before and immediately after each race, and 24- and 48-hours post competition (48POST). This study measured MF, physical fatigue, stress, tiredness and motivation using 0-100 Visual Analogue Scale, and the mood was assessed using The Brunel Mood Scale (BRUMS). A moderate to large increase in MF (ES = 0.93 [0.54 to 1.31]), BRUMS fatigue (ES = 0.61 [0.3 to 0.92]), and PF (ES = 1.21 [0.81 to 1.61]) was reported following orienteering races. A small increase in tiredness and BRUMS confusion, and a small decrease in motivation, stress and BRUMS vigour was also reported. There was a delay in recovering from the MF elicited by competition, with a small increase in MF (ES = 0.54 [0.08 to 1.15]) at 48POST compared to the pre-competition value. This study found that orienteers experience MF during competition and have a delayed recovery that can last up to two days after the competition.

Insights into Electrode Architectures and Lithium-Ion Transport in Polycrystalline V2 O5 Cathodes of Solid-State Batteries.

Polymer-based solid-state batteries (SSBs) have received increasing attentions due to the absence of interfacial problems in sulfide/oxide-type SSBs, but the lower oxidation potential of polymer-based electrolytes greatly limits the application of conventional high-voltage cathode such as LiNix Coy Mnz O2 (NCM) and lithium-rich NCM. Herein, this study reports on a lithium-free V2 O5 cathode that enables the applications of polymer-based solid-state electrolyte (SSE) with high energy density due to the microstructured transport channels and suitable operational voltage. Using a synergistic combination of structural inspection and non-destructive X-ray computed tomography (X-CT), it interprets the chemo-mechanical behavior that determines the electrochemical performance of the V2 O5 cathode. Through detailed kinetic analyses such as differential capacity and galvanostatic intermittent titration technique (GITT), it is elucidated that the hierarchical V2 O5 constructed through microstructural engineering exhibits smaller electrochemical polarization and faster Li-ion diffusion rates in polymer-based SSBs than those in the liquid lithium batteries (LLBs). By the hierarchical ion transport channels created by the nanoparticles against each other, superior cycling stability (≈91.7% capacity retention after 100 cycles at 1 C) is achieved at 60 °C in polyoxyethylene (PEO)-based SSBs. The results highlight the crucial role of microstructure engineering in designing Li-free cathodes for polymer-based SSBs.

Zinc-Doping Strategy on P2-Type Mn-Based Layered Oxide Cathode for High-Performance Potassium-ion Batteries.

Mn-based layered oxide is extensively investigated as a promising cathode material for potassium-ion batteries due to its high theoretical capacity and natural abundance of manganese. However, the Jahn-Teller distortion caused by high-spin Mn3+ (t2g 3 eg 1 ) destabilizes the host structure and reduces the cycling stability. Here, K0.02 Na0.55 Mn0.70 Ni0.25 Zn0.05 O2 (denoted as KNMNO-Z) is reported to inhibit the Jahn-Teller effect and reduce the irreversible phase transition. Through the implementation of a Zn-doping strategy, higher Mn valence is achieved in the KNMNO-Z electrode, resulting in a reduction of Mn3+ amount and subsequently leading to an improvement in cyclic stability. Specifically, after 1000 cycles, a high retention rate of 97% is observed. Density functional theory calculations reveals that low-valence Zn2+ ions substituting the transition metal position of Mn regulated the electronic structure around the MnO bonding, thereby alleviating the anisotropic coupling between oxidized O2- and Mn4+ and improving the structural stability. K0.02 Na0.55 Mn0.70 Ni0.25 Zn0.05 O2 provided an initial discharge capacity of 57 mAh g-1 at 100 mA g-1 and a decay rate of only 0.003% per cycle, indicating that the Zn-doped strategy is effective for developing high-performance Mn-based layered oxide cathode materials in PIBs.

Novel Synthesis of 3D Mesoporous FePO4 from Electroflocculation of Iron Filings as a Precursor of High-Performance LiFePO4/C Cathode for Lithium-Ion Batteries.

This study presents an economic and environmentally friendly method for the synthesis of microspherical FePO4·2H2O precursors with secondary nanostructures by the electroflocculation of low-cost iron fillers in a hot solution. The morphology and crystalline shape of the precursors were adjusted by gradient co-precipitation of pH conditions. The effect of precursor structure and morphology on the electrochemical performance of the synthesized LiFePO4/C was investigated. Electrochemical analysis showed that the assembly of FePO4·2H2O submicron spherical particles from primary nanoparticles and nanorods resulted in LiFePO4/C exhibiting excellent multiplicity and cycling performance with first discharge capacities at 0.2C, 1C, 5C, and 10C of 162.8, 134.7, 85.5, and 47.7 mAh·g-1, respectively, and the capacity of LiFePO4/C was maintained at 85.5% after 300 cycles at 1C. The significant improvement in the electrochemical performance of LiFePO4/C was attributed to the enhanced Li+ diffusion rate and the crystallinity of LiFePO4/C. Thus, this work shows a new three-dimensional mesoporous FePO4 synthesized from the iron flake electroflocculation as a precursor for high-performance LiFePO4/C cathodes for lithium-ion batteries.

Interface Coordination Stabilizing Reversible Redox of Zinc for High-Performance Zinc-Iodine Batteries.

Aqueous Zn batteries (AZBs) have attracted extensive attention due to good safety, cost-effectiveness, and environmental benignity. However, the sluggish kinetics of divalent zinc ion and the growth of Zn dendrites severely deteriorate the cycling stability and specific capacity. The authors demonstrate modulation of the interfacial redox process of zinc via the dynamic coordination chemistry of phytic acid with zinc ions. The experimental results and theoretical calculation reveal that the in-situ formation of such inorganic-organic films as a dynamic solid-electrolyte interlayer is efficient to buffer the zinc ion transfer via the energy favorable coordinated hopping mechanism for the reversible zinc redox reactions. Especially, along the interfacial coating layer with porous channel structure is able to regulate the solvation structure of zinc ions along the dynamic coordination of the phytic acid skeleton, efficiently inhibiting the surface corrosion of zinc and dendrite growth. Therefore, the resultant Zn anode achieves low voltage hysteresis and long cycle life at rigorous charge and discharge circulation for fabricating highly robust rechargeable batteries. Such an advanced strategy for modulating ion transport demonstrates a highly promising approach to addressing the basic challenges for zinc-based rechargeable batteries, which can potentially be extended to other aqueous batteries.

Electrochemical nitrate removal by magnetically immobilized nZVI anode on ammonia-oxidizing plate of RuO2-IrO2/Ti.

Ammonium as the major reduction intermediate has always been the limitation of nitrate reduction by cathodic reduction or nano zero-valent iron (nZVI). In this work, we report the electrochemical nitrate removal by magnetically immobilized nZVI anode on RuO2-IrO2/Ti plate with ammonia-oxidizing function. This system shows maximum nitrate removal efficiency of 94.6% and nitrogen selectivity up to 72.8% at pH of 3.0, and it has also high nitrate removal efficiency (90.2%) and nitrogen selectivity (70.6%) near neutral medium (pH = 6). As the increase of the applied anodic potentials, both nitrate removal efficiency (from 27.2% to 94.6%) and nitrogen selectivity (70.4%-72.8%) increase. The incorpration of RuO2-IrO2/Ti plate with ammonia-oxidizing function on the nZVI anode enhances the nitrate reduction. The dosage of nZVI on RuO2-IrO2/Ti plate (from 0.2 g to 0.6 g) has a slight effect (the variance is no more than 10.0%) on the removal performance. Cyclic voltammetry, Tafel analysis and electrochemical impedance spectroscopy (EIS) were further used to investigate the reaction mechanisms occurring on the nZVI surfaces in terms of CV curve area, corrosion voltage, corrosion current density and charge-transfer resistance. In conclusion, high nitrate removal performance of magnetically immobilized nZVI anode coupled with RuO2-IrO2/Ti plate may guide the design of improved electrochemical reduction by nZVI-based anode for practical nitrate remediation.

International orienteering experts' consensus on the definition, development, cause, impact and methods to reduce mental fatigue in orienteering: A Delphi study.

Orienteering is an outdoor activity wherein participants use a map and compass to locate control points and choose the quickest path to the next control point in a natural environment. Attentional focus, rapid decision-making, and high aerobic fitness may influence orienteering performance. Therefore, this research aimed to seek international orienteering expert consensus regarding the definition, development, causes, influences and methods to reduce mental fatigue (MF) in orienteering based on practical experience. Following ethical approval, a three-round Delphi survey was conducted online with twenty-four orienteering coaches and athletes (or former athletes) from 10 different countries with international orienteering competition experience. The threshold of consensus was ≥ 70% agreement among respondents. The experts agreed that MF exists in daily life and orienteering with a substantial negative effect on their conscious decision-making performance and psychological responses. The experts disagreed that the form of MF that athletes experienced in orienteering training are similar to the competition. However, there was no agreement that MF would impact endurance and high-speed running performance during orienteering. This research refines the definition of MF and summarises the distinctions in what causes MF in orienteering training and competition, implying that MF should be addressed separately.

Electrocatalytic desalination with CO2 reduction and O2 evolution.

Multifunctional electrocatalytic desalination is a promising method to increase the production of additional valuable chemicals during the desalination process. In this work, a multifunctional desalination device was demonstrated to effectively desalinate brackish water (15 000 ppm) to 9 ppm while generating formate from captured CO2 at the Bi nanoparticle cathode and releasing oxygen at the Ir/C anode. The salt feed channel is sandwiched between two electrode chambers and separated by ion-exchange membranes. The electrocatalytic process accelerates the transportation of sodium ions and chloride ions in the brine to the cathode and anode chamber, respectively. The fastest salt removal rate to date was obtained, reaching up to 228.41 µg cm-2 min-1 with a removal efficiency of 99.94%. The influences of applied potential and the concentrations of salt feed and electrolyte were investigated in detail. The current research provides a new route towards an electrochemical desalination system.

Sub-Nanometer Pt Clusters on Defective NiFe LDH Nanosheets as Trifunctional Electrocatalysts for Water Splitting and Rechargeable Hybrid Sodium-Air Batteries.

It is challenging to develop highly efficient and stable multifunctional electrocatalysts for improving the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the oxygen reduction reaction (ORR) for sustainable energy conversion and storage systems such as water-alkali electrolyzers (WAEs) and hybrid sodium-air batteries (HSABs). In this work, sub-nm Pt nanoclusters (NCs) on defective NiFe layered double hydroxide nanosheets (NixFe LDHs) are synthesized by a facile electrodeposition method. Due to the synergistic effect between Pt NCs and abundant atomic M(II) defects, along with hierarchical porous nanostructures, the Pt/NixFe LDHs catalysts exhibit superior trifunctional electrocatalytic activity and durability toward the HER/OER/ORR. A WAE fabricated with Pt/NixFe LDHs electrodes needs 1.47 V to reach a current density of 10 mA cm-2, much lower than that of the mixed 20% Pt/C and 20% Ir/C catalysts. An HSAB assembled by Pt/NixFe LDHs as a binder-free air cathode displays a high open-circuit voltage, a narrow overpotential gap, and remarkable rechargeability. This work provides a feasible strategy for constructing freestanding efficient trifunctional electrocatalysts for sustainable energy conversion and storage systems.

Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application.

Graphene or chemically modified graphene, because of its high specific surface area and abundant functional groups, provides an ideal template for the controllable growth of metal-organic framework (MOF) particles. The nanocomposite assembled from graphene and MOFs can effectively overcome the limitations of low stability and poor conductivity of MOFs, greatly widening their application in the field of electrochemistry. Furthermore, it can also be utilized as a versatile precursor due to the tunable structure and composition for various derivatives with sophisticated structures, showing their unique advantages and great potential in many applications, especially energy storage and conversion. Therefore, the related studies have been becoming a hot research topic and have achieved great progress. This review summarizes comprehensively the latest methods of synthesizing MOFs/graphene and their derivatives, and their application in energy storage and conversion with a detailed analysis of the structure-property relationship. Additionally, the current challenges and opportunities in this field will be discussed with an outlook also provided.

P2P lending platforms in Malaysia: What do we know?

Background - With the recent evolution of Financial Technology (FinTech), 11 peers to peer (P2P) lending platforms have been regulated by the Securities Commission in Malaysia since 2016. P2P lending platforms offer new investment opportunities to individual investors to earn higher rates on return than what traditional lenders usually provide. However, individual investors may face higher potential risks of default from their borrowers. Therefore, individual investors need to understand the potential exposure to such P2P lending platforms to make an effective investment decision. This study aims to explore the potential risk exposures that individual investors may experience at Malaysia's licensed P2P lending platforms.   Methods - Based on data collected manually from nine P2P lending platforms over five months, relationships between interest rates and various risk classifying factors such as credit rating, industry, business stage, loan purpose, and loan duration are examined.    Results- This study shows that loans with a similar credit rating and with or without similar loan purpose; and a business stage may offer investors significantly different interest rates. In addition, loans with shorter durations may provide investors with higher interest rates than those with longer durations. Finally, loans issued by companies from the same industry appeared to be charged with similar interest. These findings are valuable to investors to prepare themselves before making their investments at the P2P lending platforms.   Conclusion- With first hand-collected data, this study provides an original insight into Malaysia's current P2P lending platforms. Findings obtained for relationships between interest rates and risk classifying factors such as credit rating, industry, business stage, loan purpose and loan duration are valuable to investors of Malaysian P2P lending platforms.

Lessons Learnt from the Second Generation of Anti-Amyloid Monoclonal Antibodies Clinical Trials.

BACKGROUND: Alzheimer disease (AD) is a chronic neurodegenerative disorder with complex pathophysiology that affects over 50 million people worldwide. Most drug therapies, to date, have focused on targeting the amyloid-beta (Aß) pathway, but clinical outcomes of anti-Aß antibodies have been unsuccessful and unable to meet their primary endpoints. Similar trends have also been observed in treatments that target the tau pathway. SUMMARY: This paper reviews recent anti-Aß passive monotherapies, since Bapineuzumab, that have progressed to phase 3 clinical trials. Specifically, we discuss the 4 clinical trial programs of Solanezumab (targets Aß monomers), Aducanumab (targets Aß oligomers and plaques), Crenezumab (targets Aß oligomers), and Gantenerumab (targets Aß fibrils) which are all exogenous monoclonal antibodies. We conclude with potential reasons for why they have not met their primary endpoints and discuss lessons learnt from these trials. Key Message: Future disease-modifying trials (DMTs) for AD should be conducted in asymptomatic, Aß-positive individuals. Moreover, potential additive and/or synergistic benefits focusing on anti-Aß and anti-tau drug combinations merit further investigation.

Supercapacitor Performance of Nickel-Cobalt Sulfide Nanotubes Decorated Using Ni Co-Layered Double Hydroxide Nanosheets Grown in Situ on Ni Foam.

In this study, to fabricate a non-binder electrode, we grew nickel-cobalt sulfide (NCS) nanotubes (NTs) on a Ni foam substrate using a hydrothermal method through a two-step approach, namely in situ growth and an anion-exchange reaction. This was followed by the electrodeposition of double-layered nickel-cobalt hydroxide (NCOH) over a nanotube-coated substrate to fabricate NCOH core-shell nanotubes. The final product is called NCS@NCOH herein. Structural and morphological analyses of the synthesized electrode materials were conducted via SEM and XRD. Different electrodeposition times were selected, including 10, 20, 40, and 80 s. The results indicate that the NCSNTs electrodeposited with NCOH nanosheets for 40 s have the highest specific capacitance (SC), cycling stability (2105 Fg-1 at a current density of 2 Ag-1), and capacitance retention (65.1% after 3,000 cycles), in comparison with those electrodeposited for 10, 20, and 80 s. Furthermore, for practical applications, a device with negative and positive electrodes made of active carbon and NCS@NCOH was fabricated, achieving a high-energy density of 23.73 Whkg-1 at a power density of 400 Wkg-1.

Phosphorus Regulated Cobalt Oxide@Nitrogen-Doped Carbon Nanowires for Flexible Quasi-Solid-State Supercapacitors.

Battery-type materials are promising candidates for achieving high specific capacity for supercapacitors. However, their slow reaction kinetics hinders the improvement in electrochemical performance. Herein, a hybrid structure of P-doped Co3 O4 (P-Co3 O4 ) ultrafine nanoparticles in situ encapsulated into P, N co-doped carbon (P, N-C) nanowires by a pyrolysis-oxidation-phosphorization of 1D metal-organic frameworks derived from Co-layered double hydroxide as self-template and reactant is reported. This hybrid structure prevents active material agglomeration and maintains a 1D oriented arrangement, which exhibits a large accessible surface area and hierarchically porous feature, enabling sufficient permeation and transfer of electrolyte ions. Theoretical calculations demonstrate that the P dopants in P-Co3 O4 @P, N-C could reduce the adsorption energy of OH- and regulate the electrical properties. Accordingly, the P-Co3 O4 @P, N-C delivers a high specific capacity of 669 mC cm-2 at 1 mA cm-2 and an ultralong cycle life with only 4.8% loss over 5000 cycles at 30 mA cm-2 . During the fabrication of P-Co3 O4 @P, N-C, Co@P, N-C is simultaneously developed, which can be integrated with P-Co3 O4 @P, N-C for the assembly of asymmetric supercapacitors. These devices achieve a high energy density of 47.6 W h kg-1 at 750 W kg-1 and impressive flexibility, exhibiting a great potential in practical applications.

Phosphorus-Mediated MoS2 Nanowires as a High-Performance Electrode Material for Quasi-Solid-State Sodium-Ion Intercalation Supercapacitors.

Molybdenum disulfide (MoS2 ) is a promising electrode material for electrochemical energy storage owing to its high theoretical specific capacity and fascinating 2D layered structure. However, its sluggish kinetics for ionic diffusion and charge transfer limits its practical applications. Here, a promising strategy is reported for enhancing the Na+ -ion charge storage kinetics of MoS2 for supercapacitors. In this strategy, electrical conductivity is enhanced and the diffusion barrier of Na+ ion is lowered by a facile phosphorus-doping treatment. Density functional theory results reveal that the lowest energy barrier of dilute Na-vacancy diffusion on P-doped MoS2 (0.11 eV) is considerably lower than that on pure MoS2 (0.19 eV), thereby signifying a prominent rate performance at high Na intercalation stages upon P-doping. Moreover, the Na-vacancy diffusion coefficient of the P-doped MoS2 at room temperatures can be enhanced substantially by approximately two orders of magnitude (10-6 -10-4 cm2 s-1 ) compared with pure MoS2 . Finally, the quasi-solid-state asymmetrical supercapacitor assembled with P-doped MoS2 and MnO2 , as the positive and negative electrode materials, respectively, exhibits an ultrahigh energy density of 67.4 W h kg-1 at 850 W kg-1 and excellent cycling stability with 93.4% capacitance retention after 5000 cycles at 8 A g-1 .

High-Performance Flexible Quasi-Solid-State Supercapacitors Realized by Molybdenum Dioxide@Nitrogen-Doped Carbon and Copper Cobalt Sulfide Tubular Nanostructures.

Flexible quasi-/all-solid-state supercapacitors have elicited scientific attention to fulfill the explosive demand for portable and wearable electronic devices. However, the use of electrode materials faces several challenges, such as intrinsically slow kinetics and volume change upon cycling, which impede the energy output and electrochemical stability. This study presents well-aligned molybdenum dioxide@nitrogen-doped carbon (MoO2@NC) and copper cobalt sulfide (CuCo2S4) tubular nanostructures grown on flexible carbon fiber for use as electrode materials in supercapacitors. Benefiting from the chemically stable interfaces, affluent active sites, and efficient 1D electron transport, the MoO2@NC and CuCo2S4 nanostructures integrated on conductive substrates deliver excellent electrochemical performance. A flexible quasi-solid-state asymmetric supercapacitor composed of MoO2@NC as the negative electrode and CuCo2S4 as the positive electrode achieves an ultrahigh energy density of 65.1 W h kg-1 at a power density of 800 W kg-1 and retains a favorable energy density of 27.6 W h kg-1 at an ultrahigh power density of 12.8 kW kg-1. Moreover, it demonstrates good cycling performance with 90.6% capacitance retention after 5000 cycles and excellent mechanical flexibility by enabling 92.2% capacitance retention after 2000 bending cycles. This study provides an effective strategy to develop electrode materials with superior electrochemical performance for flexible supercapacitors.