Control of Magnetic Shape Anisotropy by Nanopillar Dimensionality in Vertically Aligned Nanocomposites.

Perpendicular magnetic anisotropy forms the foundation of the current data storage technology. However, there is an ever-increasing demand for higher density data storage, faster read-write access times, and lower power consuming storage devices, which requires new materials to reduce the switching current, improve bit-to-bit distributions, and improve reliability of writing with scalability below 10 nm. Here, vertically aligned nanocomposites (VANs) composed of self-assembled ferromagnetic La0.7Sr0.3MnO3 (LSMO) nanopillars in a surrounding ZnO matrix are investigated for controllable magnetic anisotropy. Confinement of LSMO into nanopillar dimensions down to 15 nm in such VAN films aligns the magnetic easy axis along the out-of-plane (i.e., perpendicular) direction, in strong contrast to the typical in-plane easy axis for strained, phase pure LSMO thin films. The dominant contribution to the magnetic anisotropy in these (LSMO)0.1(ZnO)0.9 VAN films comes from the shape of the nanopillars, while the epitaxial strain at the vertical LSMO:ZnO interfaces exhibits a negligible effect. These VAN films with their large, out-of-plane remnant magnetization of 2.6 µB/Mn and bit density of 0.77 Tbits/inch2 offer an interesting strategy for enhanced data storage applications.

Simultaneous Enhancement of Lithium Transfer Kinetics and Structural Stability in Dual-Phase TiO2 Electrodes by Ruthenium Doping.

Dual-phase TiO2 consisting of bronze and anatase phases is an attractive electrode material for fast-charging lithium-ion batteries due to the unique phase boundaries present. However, further enhancement of its lithium storage performance has been hindered by limited knowledge on the impact of cation doping as an efficient modification strategy. Here, the effects of Ru4+ doping on the dual-phase structure and the related lithium storage performance are demonstrated for the first time. Structural analysis reveals that an optimized doping ratio of Ru:Ti = 0.01:0.99 (1-RTO) is vital to maintain the dual-phase configuration because the further increment of Ru4+ fraction would compromise the crystallinity of the bronze phase. Various electrochemical tests and density functional theory calculations indicate that Ru4+ doping in 1-RTO enables more favorable lithium diffusion in the bulk for the bronze phase as compared to the undoped TiO2 (TO) counterpart, while lithium kinetics in the anatase phase are found to remain similar. Furthermore, Ru4+ doping leads to a better cycling stability for 1-RTO-based electrodes with a capacity retention of 82.1% after 1200 cycles at 8 C as compared to only 56.1% for TO-based electrodes. In situ X-ray diffraction reveals a reduced phase separation in the lithiated anatase phase, which is thought to stabilize the dual-phase architecture during extended cycling. The simultaneous enhancement of rate ability and cycling stability of dual-phase TiO2 enabled by Ru4+ doping provides a new strategy toward fast-charging lithium-ion batteries.

Stabilizing Crystal Framework of an Overlithiated Li1+xMn2O4 Cathode by Heterointerfacial Epitaxial Strain for High-Performance Microbatteries.

To meet the increasing demands of high-energy and high-power-density lithium-ion microbatteries, overlithiated Li1+xMn2O4 (0 ≤ x ≤ 1) is an attractive cathode candidate due to the high theoretical capacity of 296 mAh g-1 and the interconnected lithium-ion diffusion pathways. However, overlithiation triggers the irreversible cubic-tetragonal phase transition due to Jahn-Teller distortion, causing rapid capacity degradation. In contrast to conventional lithium-ion batteries, microbatteries offer the opportunity to develop specific thin-film-based modification strategies. Here, heterointerfacial lattice strain is proposed to stabilize the spinel crystal framework of an overlithiated Li1+xMn2O4 (LMO) cathode by epitaxial thin film growth on an underlying SrRuO3 (SRO) electronic conductor layer. It is demonstrated that the lattice misfit at the LMO/SRO heterointerface results in an in-plane epitaxial constraint in the full LMO film. This suppresses the lattice expansion during overlithiation that typically occurs in the in-plane direction. It is proposed by density functional theory modeling that the epitaxial constraint can accommodate the internal lattice stress originating from the cubic-tetragonal transition during overlithiation. As a result, a doubling of the capacity is achieved by reversibly intercalating a second lithium ion in a LiMn2O4 epitaxial cathode with a complete reversible phase transition. An impressive cycling stability can be obtained with reversible capacity retentions of above 90.3 and 77.4% for the 4 and 3 V range, respectively. This provides an effective strategy toward a stable overlithiated Li1+xMn2O4 epitaxial cathode for high-performance microbatteries.

A broad-spectrum gas sensor based on correlated two-dimensional electron gas.

Designing a broad-spectrum gas sensor capable of identifying gas components in complex environments, such as mixed atmospheres or extreme temperatures, is a significant concern for various technologies, including energy, geological science, and planetary exploration. The main challenge lies in finding materials that exhibit high chemical stability and wide working temperature range. Materials that amplify signals through non-chemical methods could open up new sensing avenues. Here, we present the discovery of a broad-spectrum gas sensor utilizing correlated two-dimensional electron gas at a delta-doped LaAlO3/SrTiO3 interface with LaFeO3. Our study reveals that a back-gating on this two-dimensional electron gas can induce a non-volatile metal to insulator transition, which consequently can activate the two-dimensional electron gas to sensitively and quantitatively probe very broad gas species, no matter whether they are polar, non-polar, or inert gases. Different gas species cause resistance change at their sublimation or boiling temperature and a well-defined phase transition angle can quantitatively determine their partial pressures. Such unique correlated two-dimensional electron gas sensor is not affected by gas mixtures and maintains a wide operating temperature range. Furthermore, its readout is a simple measurement of electric resistance change, thus providing a very low-cost and high-efficient broad-spectrum sensing technique.

Discovery of lead quinone cathode materials for Li-ion batteries.

Organic cathode materials are attractive candidates for the development of high-performance Li-ion batteries (LIBs). The chemical space of candidate molecules is too vast to be explored solely by experiments; however, it can be systematically explored by a high-throughput computational search that incorporates a spectrum of screening techniques. Here, we present a time- and resource-efficient computational scheme that incorporates machine learning and semi-empirical quantum mechanical methods to study the chemical space of approximately 200 000 quinone-based molecules for use as cathode materials in LIBs. By performing an automated search on a commercial vendor database, computing battery-relevant properties such as redox potential, gravimetric charge capacity, gravimetric energy density, and synthetic complexity score, and evaluating the structural integrity upon the lithiation process, a total of 349 molecules were identified as potentially high-performing cathode materials for LIBs. The chemical space of the screened candidates was visualized using dimensionality reduction methods with the aim of further downselecting the best candidates for experimental validation. One such directly purchasable candidate, 1,4,9,10-anthracenetetraone, was analyzed through cyclic voltammetry experiments. The measured redox potentials of the two lithiation steps, , of 3.3 and 2.4 V, were in good agreement with the predicted redox potentials, , of 3.2 and 2.3 V vs. Li/Li+, respectively. Lastly, to lay out the principles for rational design of quinone-based cathode materials beyond the current work, we constructed and discussed the quantitative structure property relationships of quinones based on the data generated from the calculations.

Nanostructured Thermoelectric Films Synthesised by Spark Ablation and Their Oxidation Behaviour.

Reducing the thermal conductivity of thermoelectric materials has been a field of intense research to improve the efficiency of thermoelectric devices. One approach is to create a nanostructured thermoelectric material that has a low thermal conductivity due to its high number of grain boundaries or voids, which scatter phonons. Here, we present a new method based on spark ablation nanoparticle generation to create nanostructured thermoelectric materials, demonstrated using Bi2Te3. The lowest achieved thermal conductivity was <0.1 W m-1 K-1 at room temperature with a mean nanoparticle size of 8±2 nm and a porosity of 44%. This is comparable to the best published nanostructured Bi2Te3 films. Oxidation is also shown to be a major issue for nanoporous materials such as the one here, illustrating the importance of immediate, air-tight packaging of such materials after synthesis and deposition.

Fast and Durable Lithium Storage Enabled by Tuning Entropy in Wadsley-Roth Phase Titanium Niobium Oxides.

Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lithium storage in entropy-stabilized Fe0.4 Ti1.6 Nb10 O28.8 (FTNO) is enabled by tuning entropy via Fe substitution. By increasing the entropy, a reduction of the calcination temperature to form a phase pure material is achieved, leading to a reduced grain size and, therefore, a shortening of Li+ pathway along the diffusion channels. Furthermore, in situ X-ray diffraction reveals that the increased entropy leads to the decreased expansion along a-axis, which stabilizes the lithium intercalation channel. Density functional theory modeling indicates the origin to be the more stable FeO bond as compared to TiO bond. As a result, the rate performance is significantly enhanced exhibiting a reversible capacity of 73.7 mAh g-1 at 50 C for FTNO as compared to 37.9 mAh g-1 for its TNO counterpart. Besides, durable cycling is achieved by FTNO, which delivers a discharge capacity of 130.0 mAh g-1 after 6000 cycles at 10 C. Finally, the potential impact for practical application of FTNO anodes has been demonstrated by successfully constructing fast charging and stable LiFePO4 ‖FTNO full cells.

Self-Assembled Epitaxial Cathode-Electrolyte Nanocomposites for 3D Microbatteries.

The downscaling of electronic devices requires rechargeable microbatteries with enhanced energy and power densities. Here, we evaluate self-assembled vertically aligned nanocomposite (VAN) thin films as a platform to create high-performance three-dimensional (3D) microelectrodes. This study focuses on controlling the VAN formation to enable interface engineering between the LiMn2O4 cathode and the (Li,La)TiO3 solid electrolyte. Electrochemical analysis in a half cell against lithium metal showed the absence of sharp redox peaks due to the confinement in the electrode pillars at the nanoscale. The (100)-oriented VAN thin films showed better rate capability and stability during extensive cycling due to the better alignment to the Li-diffusion channels. However, an enhanced pseudocapacitive contribution was observed for the increased total surface area within the (110)-oriented VAN thin films. These results demonstrate for the first time the electrochemical behavior of cathode-electrolyte VANs for lithium-ion 3D microbatteries while pointing out the importance of control over the vertical interfaces.

Signatures of enhanced out-of-plane polarization in asymmetric BaTiO3 superlattices integrated on silicon.

In order to bring the diverse functionalities of transition metal oxides into modern electronics, it is imperative to integrate oxide films with controllable properties onto the silicon platform. Here, we present asymmetric LaMnO3/BaTiO3/SrTiO3 superlattices fabricated on silicon with layer thickness control at the unit-cell level. By harnessing the coherent strain between the constituent layers, we overcome the biaxial thermal tension from silicon and stabilize c-axis oriented BaTiO3 layers with substantially enhanced tetragonality, as revealed by atomically resolved scanning transmission electron microscopy. Optical second harmonic generation measurements signify a predominant out-of-plane polarized state with strongly enhanced net polarization in the tricolor superlattices, as compared to the BaTiO3 single film and conventional BaTiO3/SrTiO3 superlattice grown on silicon. Meanwhile, this coherent strain in turn suppresses the magnetism of LaMnO3 as the thickness of BaTiO3 increases. Our study raises the prospect of designing artificial oxide superlattices on silicon with tailored functionalities.

Enhanced Cycling and Rate Capability by Epitaxially Matched Conductive Cubic TiO Coating on LiCoO2 Cathode Films.

Layered lithium transition-metal oxides, such as LiCoO2 and its doped and lithium-rich analogues, have become the most attractive cathode material for current lithium-ion batteries due to their excellent power and energy densities. However, parasitic reactions at the cathode-electrolyte interface, such as metal-ion dissolution and electrolyte degradation, instigate major safety and performance issues. Although metal oxide coatings can enhance the chemical and structural stability, their insulating nature and lattice mismatch with the adjacent cathode material can act as a physical barrier for ion transport, which increases the charge-transfer resistance across the interface and impedes cell performance at high rates. Here, epitaxial engineering is applied to stabilize a cubic (100)-oriented TiO layer on top of single (104)-oriented LiCoO2 thin films to study the effect of a conductive coating on the electrochemical performance. Lattice matching between the (104) LiCoO2 surface facets and the (100) TiO plane enables the formation of the titanium mono-oxide phase, which dramatically enhances the cycling stability as well as the rate capability of LiCoO2. This cubic TiO coating enhances the preservation of the phase and structural stability across the (104) LiCoO2 surface. The results suggest a more stable Co3+ oxidation state, which not only limits the cobalt-ion dissolution into the electrolyte but also suppresses the catalytic degradation of the liquid electrolyte. Furthermore, the high c-rate performance combined with high Columbic efficiency indicates that interstitial sites in the cubic TiO lattice offer facile pathways for fast lithium-ion transport.

Long-range ordering of two-dimensional wide bandgap tantalum oxide nanosheets in printed films.

Two-dimensional oxide materials are a well-studied, interesting class of materials, enabled by the fact that their bulk layered metal oxides, such as titanates and niobates, can be easily exfoliated within minutes into 2D nanosheets. However, some promising oxide materials, such tantalum oxide, are much more difficult to delaminate, taking several weeks, due to the higher charge density resulting in stronger Coulombic interactions between the layers. This intrinsic constraint has limited detailed studies for exploiting the promising properties of tantalum oxide 2D nanosheets towards enhanced catalysis and energy storage. Here, we have studied in detail the exfoliation mechanism of high charge density 2D materials, specifically tantalum oxide (TaO3) nanosheets. Optimization of tetrabutylphosphonium hydroxide (TBPOH) as the exfoliation agent in a 2 : 1 ratio to HTaO3 has resulted in a dramatic reduction of the exfoliation time down to only 36 hours at 80 °C. Furthermore, single monolayers of TaO3 nanosheets with >95% coverage have been achieved by Langmuir-Blodgett deposition, while thicker layers (ranging from several tens of nanometers up to microns) exhibiting long-range ordering of the present nanosheets have been realized through inkjet printing. Interestingly, scanning tunneling microscopy analysis indicated a wide bandgap of ∼5 eV for the single TaO3 nanosheets. This value is significantly higher than the reported values between 3.5 and 4.3 eV for the layered RbTaO3 parent compound, and opens up new opportunities for 2D oxide materials.

Spatially Controlled Octahedral Rotations and Metal-Insulator Transitions in Nickelate Superlattices.

The properties of correlated oxides can be manipulated by forming short-period superlattices since the layer thicknesses are comparable with the typical length scales of the involved correlations and interface effects. Herein, we studied the metal-insulator transitions (MITs) in tetragonal NdNiO3/SrTiO3 superlattices by controlling the NdNiO3 layer thickness, n in the unit cell, spanning the length scale of the interfacial octahedral coupling. Scanning transmission electron microscopy reveals a crossover from a modulated octahedral superstructure at n = 8 to a uniform nontilt pattern at n = 4, accompanied by a drastically weakened insulating ground state. Upon further reducing n the predominant dimensionality effect continuously raises the MIT temperature, while leaving the antiferromagnetic transition temperature unaltered down to n = 2. Remarkably, the MIT can be enhanced by imposing a sufficiently large strain even with strongly suppressed octahedral rotations. Our results demonstrate the relevance for the control of oxide functionalities at reduced dimensions.

Strain-Engineered Metal-to-Insulator Transition and Orbital Polarization in Nickelate Superlattices Integrated on Silicon.

Epitaxial growth of SrTiO3 (STO) on silicon greatly accelerates the monolithic integration of multifunctional oxides into the mainstream semiconductor electronics. However, oxide superlattices (SLs), the birthplace of many exciting discoveries, remain largely unexplored on silicon. In this work, LaNiO3 /LaFeO3 SLs are synthesized on STO-buffered silicon (Si/STO) and STO single-crystal substrates, and their electronic properties are compared using dc transport and X-ray absorption spectroscopy. Both sets of SLs show a similar thickness-driven metal-to-insulator transition, albeit with resistivity and transition temperature modified by the different amounts of strain. In particular, the large tensile strain promotes a pronounced Ni 3 d x 2 - y 2 orbital polarization for the SL grown on Si/STO, comparable to that reported for LaNiO3 SL epitaxially strained to DyScO3 substrate. Those results illustrate the ability to integrate oxide SLs on silicon with structure and property approaching their counterparts grown on STO single crystal, and also open up new prospects of strain engineering in functional oxides based on the Si platform.

Morphology Evolution during Lithium-Based Vertically Aligned Nanocomposite Growth.

Ceramic-based nanocomposites are a rapidly evolving research area as they are currently being used in a wide range of applications. Epitaxial vertically aligned nanocomposites (VANs) offer promising advantages over conventional planar multilayers as key functionalities are tailored by the strong coupling at their vertical interfaces. However, limited knowledge exists of which material systems are compatible in composite films and which types of structures are optimal for a given functionality. No lithium-based VANs have yet been explored for energy storage, while 3D solid-state batteries offer great promise for enhanced energy and power densities. Although solid-on-solid kinetic Monte Carlo simulation (KMCS) models of VAN growth have previously been developed, phase separation was forced into the systems by limiting hopping directions and/or tuning the activation energies for hopping. Here, we study the influence of the temperature and deposition rate on the morphology evolution of lithium-based VANs, consisting of a promising LiMn2O4 cathode and a Li0.5La0.5TiO3 electrolyte, by applying a KMCS model with activation energies for hopping obtained experimentally and with minimum restrictions for hopping directions. Although the model considers only the kinetic processes away from thermodynamic equilibrium, which would determine the final shape of the pillars within the matrix, the trends in pillar size and distribution within the simulated VANs are in good agreement with experiments. This provides an elegant tool to predict the growth of VAN materials as the experimental activation energies and higher degrees of freedom for hopping result in a more realistic and low computational cost model to obtain accurate simulations of VAN materials.

Growing a LaAlO3/SrTiO3 heterostructure on Ca2Nb3O10 nanosheets.

The two-dimensional electron liquid which forms between the band insulators LaAlO3 (LAO) and SrTiO3 (STO) is a promising component for oxide electronics, but the requirement of using single crystal SrTiO3 substrates for the growth limits its applications in terms of device fabrication. It is therefore important to find ways to deposit these materials on other substrates, preferably Si, or Si-based, in order to facilitate integration with existing technology. Interesting candidates are micron-sized nanosheets of Ca2Nb3O10 which can be used as seed layers for perovskite materials on any substrate. We have used low-energy electron microscopy (LEEM) with in-situ pulsed laser deposition to study the subsequent growth of STO and LAO on such flakes which were deposited on Si. We can follow the morphology and crystallinity of the layers during growth, as well as fingerprint their electronic properties with angle resolved reflected electron spectroscopy. We find that STO layers, deposited on the nanosheets, can be made crystalline and flat; that LAO can be grown in a layer-by-layer fashion; and that the full heterostructure shows the signature of the formation of a conducting interface.

Metal-insulator-transition engineering by modulation tilt-control in perovskite nickelates for room temperature optical switching.

In transition metal perovskites ABO3, the physical properties are largely driven by the rotations of the BO6 octahedra, which can be tuned in thin films through strain and dimensionality control. However, both approaches have fundamental and practical limitations due to discrete and indirect variations in bond angles, bond lengths, and film symmetry by using commercially available substrates. Here, we introduce modulation tilt control as an approach to tune the ground state of perovskite oxide thin films by acting explicitly on the oxygen octahedra rotation modes-that is, directly on the bond angles. By intercalating the prototype SmNiO3 target material with a tilt-control layer, we cause the system to change the natural amplitude of a given rotation mode without affecting the interactions. In contrast to strain and dimensionality engineering, our method enables a continuous fine-tuning of the materials' properties. This is achieved through two independent adjustable parameters: the nature of the tilt-control material (through its symmetry, elastic constants, and oxygen rotation angles), and the relative thicknesses of the target and tilt-control materials. As a result, a magnetic and electronic phase diagram can be obtained, normally only accessible by A-site element substitution, within the single SmNiO3 compound. With this unique approach, we successfully adjusted the metal-insulator transition (MIT) to room temperature to fulfill the desired conditions for optical switching applications.

Enhanced Lithium Transport by Control of Crystal Orientation in Spinel LiMn2O4 Thin Film Cathodes.

A promising cathode material for rechargeable batteries is LiMn2O4, which exhibits higher operating voltage, reduced toxicity and lower costs as compared to commonly used LiCoO2 cathodes. However, LiMn2O4 suffers from limited cycle life, as excessive capacity fading occurs during battery cycling due to dissolution of Mn into the acidic electrolyte. Here, we show that by structural engineering of stable, epitaxial LiMn2O4 thin films the electrochemical properties can be enhanced as compared to polycrystalline samples. Control of the specific crystal orientation of the LiMn2O4 thin films resulted in dramatic differences in surface morphology with pyramidal, rooftop or flat features for respectively (100), (110), and (111) orientations. All three types of LiMn2O4 films expose predominantly  ⟨111⟩ crystal facets, which is the lowest energy state surface for this spinel structure. The (100)-oriented LiMn2O4 films exhibited the highest capacities and (dis)charging rates up to 33C, and good cyclability over a thousand cycles, demonstrating enhanced cycle life without excessive capacity fading as compared to previous polycrystalline studies.

Transport limits in defect-engineered LaAlO3/SrTiO3 bilayers.

The electrical properties of the metallic interface in LaAlO3/SrTiO3 (LAO/STO) bilayers are investigated with focus on the role of cationic defects in thin film STO. Systematic growth-control of the STO thin film cation stoichiometry (defect-engineering) yields a relation between cationic defects in the STO layer and electronic properties of the bilayer-interface. Hall measurements reveal a stoichiometry-effect primarily on the electron mobility. The results indicate an enhancement of scattering processes in as-grown non-stoichiometric samples indicating an increased density of defects. Furthermore, we discuss the thermodynamic processes and defect-exchange reactions at the LAO/STO-bilayer interface determined in high temperature equilibrium. By quenching defined defect states from high temperature equilibrium, we finally connect equilibrium thermodynamics with room temperature transport. The results are consistent with the defect-chemistry model suggested for LAO/STO interfaces. Moreover, they reveal an additional healing process of extended defects in thin film STO.

Selective hydrothermal method to create patterned and photoelectrochemically effective Pt/WO3 interfaces.

A hydrothermal method based on the use of hydrogen peroxide is described to grow a homogeneous layer of tungsten oxide (WO3) on a platinum (Pt) film supported on a silicon wafer. WO3 growth is highly selective for Pt when present on silicon in a patterned arrangement, demonstrating that Pt catalyzes decomposition of the WO3 precursor in solution. The obtained Pt/WO3 interface yields high photocurrents of 1.1 mA/cm(2) in photoelectrochemical water splitting when illuminated by a solar simulator. The photocurrents are significantly higher than most previously reported values for hydrothermally grown layers on indium-tin oxide and fluorine-tin oxide glasses. The selective growth method thus provides new options to effectively implement WO3 in photoelectrochemical devices.

High-temperature magnetic insulating phase in ultrathin La0.67Sr0.33MnO3 films.

We present a study of the thickness dependence of magnetism and electrical conductivity in ultrathin La0.67Sr0.33MnO3 films grown on SrTiO3 (110) substrates. We found a critical thickness of 10 unit cells below which the conductivity of the films disappeared and simultaneously the Curie temperature increased, indicating a magnetic insulating phase at room temperature. These samples have a Curie temperature of about 560 K with a significant saturation magnetization of 1.2±0.2µ(B)/Mn. The canted antiferromagnetic insulating phase in ultra thin films of n<10 coincides with the occurrence of a higher symmetry structural phase with a different oxygen octahedra rotation pattern. Such a strain engineered phase is an interesting candidate for an insulating tunneling barrier in room temperature spin polarized tunneling devices.