Volumetric analysis of artifacts from fiducial markers under cone beam computed tomography.

Abstract Background/purpose: Computer aided implant surgery has been widely adopted in modern implant dentistry. However, absence of reliable anatomic landmarks for superimposing digital data sets for patients with terminal dentition or complete edentulism remained challenging. Utilization of additional fiducial markers intraorally as the reference points for the improvement of accuracy became crucial in implant digital workflow. Nevertheless, the choice of the material for fiducial markers should present the least radiographic artifacts under cone beam computed tomography (CBCT) for better accuracy. The aim of this in vitro study was to investigate the volume of radiographic artifacts generated through different materials under the image of CBCT. Materials and methods: Fifteen dental materials were selected and configured into cubic shape. All the materials were scanned initially with the laboratory scanner as the control groups. The samples were scanned by CBCT machine as test groups and the volume of artifact generated under CBCT images were compared and analyzed using 3D modeling software. Results: Eleven out of fifteen materials could be recognized under CBCT images. Volumetric analysis reported that statistically significant differences among the materials could be noted, and the flowable composite resin presented the least volumetric difference. Lithium disilicate glass-ceramic, flowable composite resin, and gutta-percha presented the least deformation and maintained their cubic shapes. Conclusion: The results of the present study may imply that flowable composite resin compared to all ceramic materials, amalgam and gutta-percha may be a preferable choice when utilized as fiducial markers under CBCT images.

Accuracy comparison of scan segmental sequential ranges with two intraoral scanners for maxilla and mandible.

Background/purpose: The accuracy of a full-arch scan by using an intraoral scanner should be validated under clinical conditions. This study aimed to compare the accuracy of full-arch digital impressions in the maxilla and mandible using two intra oral scanners with three different scan segmental sequential ranges. Materials and methods: A dental model with 28 teeth in their normal positions served as the reference. Sixty full-arch scans were performed using Trios 3 and Trios 4, employing scanning strategy O (manufacturer's original method), OH (segmental sequential ranges one half), and TQ (segmental sequential ranges third quarter). Trueness was evaluated by comparing digital impressions with a reference dataset using specialized software. One-way ANOVA and Tukey tests assessed differences between the groups. Results: For Trios 3 on the maxilla, no significant difference was found among the groups of trueness; in the mandible, strategy O exhibited a significant difference (P = 0.008) with the highest deviation. For Trios 4 on the maxilla, strategy TQ demonstrated the lowest deviation with a significant difference (P = 0.006); in the mandible, no significant difference was found among the groups of trueness. Conclusion: Strategy TQ exhibited the best trueness for Trios 3 and Trios 4, suggesting it may be preferred for higher accuracy. Clinicians should consider these findings when selecting scanning strategies and intraoral scanners for specific cases.

Silica-based silver nanocomposite 80S/Ag as Aggregatibacter actinomycetemcomitans inhibitor and its in vitro bioactivity.

Background/purpose: As a commonly-found pathogen in periodontal disease, Aggregatibacter actinomycetemcomitans has been reported with several antibiotic resistance. Thus, to develop an alternative and protective therapy for A. actinomycetemcomitans infections is urgently needed in dentistry. In this study, we sought to synthesize a silica-based material to deliver silver nanoparticles for antibacterial purposes. Also, the bioactivities were examined via analyzing the formation of hydroxyapatite. Materials and methods: The 80S/Ag powders were prepared by the evaporation-induced self-assembly method, with Si, Ca, P, and Ag composition ratios of 80, 15, 5, and 1/5/10 (mole percentage), respectively. The nitrogen adsorption-desorption isotherms, transmission electron microscope, selected area electron diffraction, and Fourier transform infrared spectroscopy were conducted for textural analyses. The disk diffusion test was carried out against A. actinomycetemcomitans strain ATCC 29523. In vitro bioactivity assessment involved soaking 80S/Ag membrane powders in acellular simulated body fluid. Results: We successfully developed a material consisting of Si, Ca, P, and Ag, namely the 80S/Ag. In the antibacterial testing, the 80S/Ag demonstrated antibacterial activity against the commonly-found oral pathogen, A. actinomycetemcomitans, with a long-lasting effect for 168h. The formation of hydroxyapatite in simulated body fluid highlighted the characteristic of dentine remineralization for the 80S/Ag. The increased pH values after immersion in simulated body fluid would help neutralize the acidic oral environment. Conclusion: Our results indicate that 80S/Ag possesses remarkable antibacterial properties, hydroxyapatite formation, and increased pH values after immersion in simulated body fluid, supporting the potential therapeutic application of 80S/Ag for treating periodontal disease.

Trueness of intraoral scanning for different tooth-size arch-length deficiencies.

Background/purpose: As science and technology continue to advance, the utilization of intraoral scanners (IOSs) has become increasingly popular in the orthodontic workflow. The aim of this study was to discuss whether the degree of crowded arches affects scan accuracy. Materials and methods: Three different crowding levels of dental models (model MI: mild, model MO: moderate, and model SE: severe) were scanned using both an IOS and desktop scanner. Stereolithographic files were obtained and superimposed via CAD software to calculate differences between each measuring point of a model and the farthest corresponding point. The deviations from three models were compared with statistical analysis. Results: The trueness of different crowding arches showed that the deviation value of model SE was the maximum, followed by model MI, and model MO in the maxillary arch. In the mandibular arch, the order of the deviation from greatest to least was firstly model SE, then model MO, and model MI. Significant differences were observed among the maxillary models (P < 0.001), but there was no significant difference between models in the mandible (P = 0.669). Conclusion: The trueness of the three crowded arches is in the clinically acceptable range. The degree of crowding increases, the trueness of scanning at each position decreases. In the maxillary arch, more severe crowding corresponds to higher deviations. In the mandible, the degree of crowding is not explicitly related to the maximum deviation; therefore, the clinician should notice the deviation when using IOSs for crowding cases.

Survival assessment of fractured porcelain-fused-to-metal crowns surface roughened by sandblasted and repaired by composite resin after in vitro thermal fatigue.

Background/purpose: Intraoral repair usually takes the convenience of the patient's daily life as the starting point, taking into account the bonding strength, operational feasibility, and safety. This study aimed to evaluate the survival of composite resin by simulating cavity fracture repair in porcelain-fused-to-metal (PFM) crowns and referring to the G.V. Black classification of caries as ceramic- and metal-site exposure. Materials and methods: Mechanical sandblast experimental and a nonsandblast control groups comprised 120 samples, and interfacial locking was enhanced through acid etching, bonding, and light-curing composite resin restoration. Classes of VI buccal (B), III mesial (M), and IV mesiobuccal (MB) types, were investigated. Load tests were performed on two sets, with one set at room temperature for 24 h and the other via thermal cycling at 5 °C/50 °C 720 times. Loading was gradually applied to the samples until a maximum of 450 N was reached. Results: Results showed that 24 h survival rates of B-, M - , and MB-repaired PFM crowns were 88%, 84%, and 88%, respectively. The repaired PFM survival rates for B, M, and MB were 52%, 44%, and 28%, respectively, after thermal cycling and loading tests. Multiple logistic regression and chi-square test (α = 0.05) showed that the regression results of factors affecting survival assessment were only significant between groups after thermal fatigue (P < 0.05). Survival rate of repairing metal-site in the MB model was significantly higher than that of ceramic-sites repairing in non-blasted samples. For the MB cavity model, sandblasting can significantly improve the survival rate of the repair of ceramic parts in the MB model (P < 0.05). Conclusion: Our results suggest that sandblasting can be further considered, especially for MB cavity fractures when ceramic-site restorations are required.

Immediate implant placement with and without provisionalization: A comparison of a one-year longitudinal study.

Background/purpose: Immediate implant placement (IIP) with and without immediate provisionalization (Ipro) may yield satisfactory results in appropriate indications and treatment, especially in the esthetic zone. The aim of this study was to compare implant stability, marginal bone loss (MBL), survival rates, and patient satisfaction between IIP with Ipro and IIP without Ipro. Materials and methods: Seventy patients, each with a failed maxillary anterior tooth, were randomly assigned to IIP with Ipro (Group A: n = 35) or IIP without Ipro (Group B: n = 35). Implant stability quotient (ISQ) and standardized periapical radiographs were performed at surgery and at 3, 6, 9, and 12 months postoperatively to investigate implant stability and MBL, respectively. Survival was assessed 1 year after surgery. Patient satisfaction was evaluated with a visual analogue scale (VAS). Results: Primary ISQ and MBL were not significantly different between groups A and B immediately after surgery (P ＞ 0.05). Implant survival was 100% in both groups, and only one mechanical complication was observed. Patient satisfaction was good at definitive crown delivery and postoperatively 1-year in both groups. However, the immediate postoperative VAS score in Group A was significantly higher than that in Group B (P < 0.05). Conclusion: Group A revealed significantly higher secondary ISQ than Group B at postoperatively 3, 6, 9, and 12 months. There were no significant differences between groups A and B in terms of MBL and survival. Notably, patient satisfaction in Group A was significantly higher than in Group B immediately after surgery.

Implant stability and marginal bone level changes: A 2-year prospective pilot study.

Background/purpose: Implant stability is crucial for successful osseointegration. Marginal bone level is considered an important indicator of long-term implant success and stability. The purposes of this study were to investigate 1) the effect of age, gender, bone density, implant length, and implant diameter on insertion torque (IT), primary implant stability quotient (ISQ), and secondary ISQ, 2) the impact of age, gender, bone density, implant length, implant diameter, IT, and ISQ on marginal bone loss (MBL). Materials and methods: Ninety patients who needed implant therapy were enrolled and overall 156 implants were installed to support single crowns. IT and ISQ were recorded for all implants during surgery and ISQ measurements were performed at follow-up visits. Age, gender, bone density, implant length and diameter were also registered. Radiographic evaluation of MBL was performed postoperative immediate (baseline), 3, 6, 9, 12, 18, and 24 months using digital periapical radiographs. Results: Age had little effect on IT and primary ISQ (P > 0.05). Generally, males had higher IT and primary ISQ, but no significant differences between genders were detected. Bone density showed significant effects on IT and primary ISQ. Correlation analysis revealed high positive correlations between IT/bone density and primary ISQ/implant diameter. Significant impacts of bone density and IT on MBL were found. Conclusion: Implant diameter had a more profound impact than length on IT/primary ISQ. Bone density played a considerable role in IT/primary ISQ determination. Bone density and IT had more impacts than primary ISQ on MBL.

Total solution of a smart shade matching.

Background/purpose: The simulated color of restorations plays an important role in improving patient satisfaction. The aim of this study was to test a new intelligent colorimetric solution using the Advanced Reflectionless Technology (ART) monitor and compare them using commercially available shade systems. Materials and methods: Six participants' right maxillary central incisors were tested with three devices, including the AUO Display Plus (Group A), a Canon single-lens reflex camera with eLAB's polar eyes filter (Group E), and the VITA Easyshade V (Group V). Each porcelain tooth was divided into three areas, and was assigned a CIELAB L∗a∗b∗ value by using the VITA Easyshade V. The original data were compared with the CIELAB L∗a∗b∗ obtained using the VITA Easyshade V. A prosthodontist compared the color of the porcelain veneers by eyes and gave the scores from 1 to 3. Results: For the ΔE, the three areas of Group A had the smallest differences between the color of the fabricated teeth and that of the original teeth. Colorimetric analysis indicated that Groups A and V did not differ much in the color of the three areas of the tooth. Groups E and A exhibited significant differences between the cervical third and middle third of the tooth, and Groups E and V exhibited significant differences between the middle third and incisal third of the tooth. Conclusion: Compared with traditional monitors, ART is closer to real images in terms of color, contrast, and detail grayscale. Technicians are able to produce realistic and pleasing colors.

Stress analysis and risk of failure during clenching in ceramic assembly models: 3-dimensional finite element analysis.

Background/purpose: Clenching is a dental parafunctional disorder that jeopardizes the life of teeth and/or dental prostheses. Computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated or 3-dimensional-printed dental prostheses are aesthetic, strong, and of good quality, but noticeable damage can still be observed after clenching. Stress analysis of synthetic ceramic assemblies with various parameters was conducted to provide data that may be used to improve the fabrication of CAD/CAM-fabricated dental prostheses. Materials and methods: Abaqus software was used to run the simulations. A total of 96 axisymmetric finite element ceramic assembly models were simulated under 800 N vertical loading and different contact radii (0.25, 0.5, 0.75, 1.0 mm), materials (IPS e.max CAD and Vita Enamic), layer thicknesses and combinations. Results: Four-layered ceramic assembly models produced promising results with the following parameters: contact radius of at least 0.5 mm, total thickness of at least 0.5 mm, and use of IPS e.max CAD as the first layer and Vita Enamic as the second layer without cement. Conclusion: The ideal four-layered assembly model design uses 0.25-mm-thick IPS e.max CAD as its outer layer to simulate enamel binding and 0.25-mm-thick Vita Enamic as its inner layer to imitate the natural tooth. This design may be used as reference for prosthodontic treatment.

Investigation on the effect of recasting palladium-silver alloy by argon arc vacuum pressure casting process.

Background/purpose: Palladium-silver (Pd-Ag) alloys are important as an alternative to gold-based alloys. The purpose of this study was to investigate the effect of an argon-arc vacuum pressure casting process on the recasting of the Pd-Ag alloy. Materials and methods: The recasting Pd-Ag alloys were compared with conventional horizontal centrifugal (HC) casting to an argon (Ar)-arc vacuum pressure (Ar-arc/VP) casting. The first-generation castings were made from a Pd-Ag alloy purchased from a supplier. Next-generation castings were made from 50 wt% Pd-Ag alloy before casting and 50 wt% from previous castings. This sequence was repeated over three generations to form the 2nd, 3rd and 4th recasting ingots. The ingots were then measured for marginal accuracy, interfacial oxidation, hardness and phase identification. Results: The recasting success rate of recastibility reached 100%. Compared with the HC group, the Ar-arc/VP group had better edge precision, smaller oxide layer thickness and lower hardness. The comparison of X-ray diffraction intensity showed that the relative intensities of Pd and Ag in the first, second and third generations recasting of the Ar-arc/VP group were significantly higher than those of the HC group. Phase analysis showed that the trace elements of indium and tin contents in the Pd-Ag recasting ingots of the Ar-arc/VP group were higher than those of the HC group. Conclusion: The results showed that the casting process used for recasting affected the quality of the Pd-Ag alloy. Therefore, Ar-arc/VP casting process could improve the effect of Pd-Ag recasting and maintain the alloy properties in comparison with HC casting.

Accuracy of intraoral scanning methods for maxillary Kennedy class I arch.

Background/purpose: The optimal strategy for scanning removable partial dentures remains unknown. This study investigated scanning strategies for patients with a maxillary Kennedy Class I arch as well as the measurement deviations of three scanning strategies. Materials and methods: A standard maxilla model was positioned with a holder in a dental chair to simulate a natural patient position and posture. Standard Tessellation Language files for reference models were formatted with a desktop scanner, and model operation files were obtained with a TRIOS 3 Pod intraoral scanner and superimposed using Exocad computer-aided design software. The three scanning strategies evaluated in this study (Strategy M, T-R, and R-T) were used for nine scans each, and the resulting data were recorded. The deviation of the three strategies was statistically analyzed through one-way ANOVA and Tukey post hoc testing. Results: The trueness of Strategy M, T-R, and R-T was 52.6 ± 31.0, 54.9 ± 27.6, and 50.1 ± 22.3 µm, respectively. No statistically significant differences in trueness were detected among the three groups (P > 0.05). However, Strategy T-R had the evenest distribution of all measuring points. The deviations of the measurements obtained by three scanning strategies were mostly between 30 and 70 µm. The precision of the three strategies was similar as well. Conclusion: Trueness did not differ significantly among the three strategies. However, Strategy T-R is recommended for use with a TRIOS 3 Pod scanner because of its reduction of the seesaw effect and high stabilization of the RPD framework.

Preliminary comparison of the remineralization and desensitization effects of a novel mineralized ion-releasing toothpaste and commercially available competitive products.

Background/purpose: Toothpaste plays an important role in brushing teeth to maintain oral hygiene and health. The purpose of this study was to develop a new toothpaste containing surface nanocrystal-rich dicalcium phosphate anhydrous (DCPA) powder and to investigate its effect on tooth samples. Materials and methods: The innovative toothpaste (REALCaP®/Group R) was compared with two commercial toothpastes (BioRepair®/Group B and Sensodyne®/Group S). Brushing cycle tests were performed on bovine tooth slices coated with individual toothpaste and a control group without toothpaste (Group C). Microhardness, roughness, surface structure observation, and X-ray diffraction (XRD) were performed on cycle days 4, 7, and 14 to analyze the impact of the toothpastes on tooth samples. Reults: Microhardness in the Group R was higher than that of the other groups regardless of the cycle days. Roughness in the Group R increased on days 4 and 7 but decreased on day 14. Roughness in the groups S and B increased with days. Microstructural observation revealed that most exposed dentinal tubules had been sealed in the Group R on day 14. Overlay thickness in the Group R was significantly higher than that in the groups S and B on days 4, 7, and 14. XRD analysis showed no hydroxyapatite (HA) peak in the Group S. The HA peak in the Group R was higher than that in the Group B on day 14. Conclusion: The innovative toothpaste has better properties than the commercially available products in terms of microhardness, roughness, and effectiveness in sealing dentinal tubules.

Questionnaire survey on the satisfaction of SimEx dental education system.

Background/purpose: The SimEx is dental training system that applies new technology in a computerized dental simulator. The purpose of this study was to understand the usability satisfaction of the SimEx dental education and evaluation system by dental students and dentists at Tohoku University. Materials and methods: In this study, the Tohoku University IRB execution number was 2020-3-33. The number of subjects accepted was 59 at Tohoku University and divided into 4 groups based on years of clinical experience (Group A: 0 years; Group B: 1-2 years; Group C: 2-5 years; Group D: at least 5 years), and a total of 58 usability questionnaires were collected. Subjects completed the SimEx Usability Satisfaction Questionnaire after operating the SimEx (EPED Inc., Kaohsiung, Taiwan) course, which contained 16 questions. Results: Among the 58 questionnaires collected by Tohoku University, there were 19 undergraduate students (4th∼6th grade), 12 post-graduate students, 14 residents, and 13 dentists. Significant differences between Group A and Group B, and between Group A and Group D were found (P < 0.05). The same results were obtained for the "experience satisfaction index". In the items where significant differences were found, longer clinical experience tended to result in lower scores. Conclusion: From these results, we can conclude that the SimEx education and evaluation system facilitates students' self-learning, and this system is very useful for continued study and clinical skill training for dentists, especially for students and junior dentists with high usability satisfaction.

The influence of cone beam computed tomography on IRIS-100 implant navigation system.

Background/purpose: Cone beam computed tomography (CBCT) is frequently used in dental diagnosis and treatment. Comparative studies of the effects of CBCT on implant navigation, however, are still limited. The objective of this study was to evaluate whether the computed tomography images of the four commercial brands will affect the accuracy of the new version of IRIS implant navigation system. Materials and methods: In the first part, the accuracy of the IRIS implant navigation system was evaluated by a precision confirmation jig whose position is confirmed. In the second part, the IRIS implant navigation system was used in conjunction with 4 brands of CBCT scans analyzed by its effect on accuracy. Results: The results showed that the mean deviation of the new version of IRIS-100 system accuracy was less than 1 mm. Among the four groups, the overall average deviation caused by CBCT images showed that the 3D eXam group had the smallest error of approximately 0.94 ± 0.12 mm and the AZ 3000 CT group had the largest error of approximately 1.34 ± 0.10 mm. Conclusion: Based on the study, the accuracy of the IRIS implant navigation system will vary with the CBCT image resolution and the status of the CBCT machine.

The stability of tetracalcium phosphate/titanium implants: A short-term follow-up study.

Background/purpose: Bioceramic tetracalcium phosphate (TTCP) is used as a surface modifier on the implant surface and the clinical studies on this surface modification are still limited. The objective of this clinical study was to investigate short-term implant stability of titanium implant surfaces being modified through sandblasting and acid etching (SLA), followed by TTCP sintered bioceramic anchoring. Materials and methods: A total of 20 patients who had single tooth space were included in this study. Surface modification by SLA plus with TTCP on Ti implants with a diameter of 4.0 mm and lengths of 10 and 11.5 mm were placed. Implant stability quotient (ISQ) value was measured immediately (ISQ0) and one month (ISQ1), two months (ISQ2), three months (ISQ3), and four months (ISQ4) after implantation. Subgroup analysis was defined to location (maxilla, mandible) and bone density (soft or hard bone). Statistical analysis was performed using Friedman test and Mann-Whitney U test. Results: The mean ISQ values with standard deviation at the different time points of ISQ0 to ISQ4 were 60.03 ± 14.12, 53.48 ± 15.24, 58.91 ± 14.43, 63.14 ± 12.22, and 63.50 ± 13.61, respectively. The results showed significant differences between the ISQ1 and ISQ3 groups and between the ISQ1 and ISQ4 groups. On the other hand, there was no statistical differences between the maxilla and mandible as well as between soft and hard bone types in all implant groups. Conclusion: TTCP/titanium implant showed favorable stability in short-term ISQ values over 4 months. The locations and bone types demonstrated no effect on implant stability.

Biodegradable Hydrogel Beads Combined with Calcium Phosphate Bone Cement for Bone Repair: In Vitro and In Vivo Characterization.

This study evaluated the in vitro characterizations of biodegradable hydrogel beads with calcium phosphate bone cement (CPC). Commercial fast-setting CPC and hydrogel beads were compared with 25%-volume hydrogel in CPC (C/0.25) in vivo. The histological behaviors and absorption rates of CPC only, hydrogel beads, and hydrogel/CPC composite were measured and compared at 4, 8, and 12 weeks. The results indicated that the C/0.25 composite can be molded and does not disintegrate when immersed in the solution, but this delays the phase transition of the CPC into the product in the early reaction process. The osteoprogenitor D1 cell affinity of the C/0.25 composite was equally competitive with that of the CPC-only. Adding hydrogel beads to CPC did not inhibit cell proliferation as well as differentiation of osteoprogenitor cells. In vivo histological evaluations did not indicate any significant difference in the CPC-only, hydrogel-only, and C/0.25 composite after 4 weeks of implantation; however, significantly less residue was observed in the C/0.25 composite relative to the CPC-only after 8 weeks. After 12 weeks of hydrogel beads implantation, the hydrogel degraded substantially, creating vacancies that were subsequently occupied by a large amount of soft tissue. New bone was formed in large quantities in the C/0.25; therefore, the C/0.25 composite is a promising option for a wide range of dental, craniofacial, and orthopedic applications.

Comparison of optical and crystal properties of three translucent yttria-stabilized tetragonal zirconia polycrystals with those of lithium disilicate glass-ceramic material.

BACKGROUND/PURPOSE: Among the ceramic materials used for all-ceramic crowns, zirconia has high biocompatibility and favorable mechanical properties, but its main drawbacks include low translucency and stress-induced phase transformation. To stabilize high-strength tetragonal zirconia polycrystal (TZP), 3-5 mol% yttria is usually added to prepare yttria-stabilized TZP (Y-TZP). In this study, the optical properties of three commercial Y-TZP ceramics were compared with those of the clinically available glass-ceramic material of lithium disilicate, and the relationship between translucency and crystal properties was analyzed in vitro. MATERIALS AND METHODS: Twelve 5-mm-thick standardized disks were prepared from three Y-TZP ceramics and one lithium disilicate block. Absolute translucency was measured using a spectrophotometer with an integrating sphere. X-ray diffraction was used to quantify the main structural parameters (i.e., preferred plane, quantitative phase, and grain size) of Y-TZP crystals. RESULTS: The product-dominated phase of Y-TZP exhibited a tetragonal lattice pattern, and the preferred planes had minor variations. The diffraction patterns of the three Y-TZP ceramics demonstrated minor effects on translucency, without significant differences (p > 0.05). The grain size of 54-70 nm was negatively related to translucency in Y-TZP. Lithium disilicate specimens had significantly higher translucency than the three Y-TZP specimens (p < 0.001). CONCLUSION: Grain size reduction played an essential role in developing highly translucent Y-TZP ceramics. The three Y-TZP ceramics were essentially opaque but exhibited poorer translucency than lithium disilicate in terms of esthetics.

Effects of Gamma Radiation on the Sterility Assurance, Antibacterial Ability, and Biocompatibility of Impregnated Hydrogel Macrosphere Protein and Drug Release.

Devices and medicines used in the medical field must be sterile. Gamma (γ)-irradiation is commonly used for sterilization because its high rate of penetration ensures uniform sterilization. To confirm that hydrogel macrosphere carriers inherit excellent liquid absorption with no cytotoxicity after γ-irradiation sterilization, investigating whether the physiochemical properties of hydrogel macrospheres differ before and after sterilization is essential. The present study evaluated the influence of the recommended 25-kGy γ-irradiation dose on the physicochemical characteristics and in vitro release of bovine serum albumin and vancomycin (an antibiotic medication) from alginate/gelatin with a w/w ratio of 1/4 crosslinking gel macrospheres. Gel macrosphere properties before and after sterilization were compared according to optical and scanning electron microscopy, infrared spectroscopy analysis, the amino residual crosslinking index, water absorption, degradation, sterility assurance, in vitro drug release, antibacterial ability, and cytotoxicity. The crosslinking index was almost unchanged; however, the γ-irradiation caused in situ hydrogel debonding and recrosslinking, which led to a decrease in the water absorption and increase in the degradation rate of the macrospheres after immersion. The release of gel macrospheres carrying vancomycin did not significantly affect antibacterial ability or biocompatibility after γ-irradiation. Accordingly, we conclude that γ-irradiation is suitable for macrospherical formulation.

Effect of different firing atmospheres on debonding strength of dental porcelain fused to commercially pure titanium.

An in vitro investigation was performed to evaluate the bonding characteristics of porcelain fused to metal (PFM)/commercially pure titanium (cp Ti, grade II) in three firing atmospheres of under vacuum and using two noble gases argon (Ar) and helium (He). Three groups of porcelain veneers firing under vacuum, Ar, and He were prepared to evaluate the bonding of porcelain fused to the cold-rolled cp Ti. The bond strength of PFM durability by a three-point bending test, phases, microhardness of cp Ti after firing processes, and fractures were measured and evaluated. Results show the microhardness of cp Ti in group of porcelain firing under He atmosphere was significantly lower than that of the two other groups, which were in vacuum and Ar (P < .05). X-ray diffraction showed the He group produced in relatively small amounts of TiO2 and TiO oxides than other groups but featured relatively high quantity of airhole defects in the porcelain body leading to the lowest bond strength. The Ar group presented the highest bond strength of comparing with the groups under vacuum and using He (P < .05). Although the firing processes in He could efficiently prevent the diffusion of oxygen into Ti, the porcelain-cp Ti bond strength using Ar protective atmosphere presented the advantage to achieve clinical requirement because porcelain firing under He revealed prominent voids and defects within the body of porcelain.

Effects of pontic span and fiber reinforcement on fracture strength of multi-unit provisional fixed partial dentures.

BACKGROUND/PURPOSE: Clinically, PMMA resin is extensively used for fabricating provisional FPDs. However, fracture often occurs due to the unsatisfactory mechanical strength, especially within connectors of long-span provisional FPDs. The purpose of this study is to evaluate the fracture load of fiber-reinforced provisional FPDs with various pontic span lengths, and to identify the most suitable span length for fiber-reinforced long-span provisional FPDs. MATERIALS AND METHODS: Fifty-six provisional FPDs with various pontic span lengths were fabricated. Seven samples from each group were reinforced with glass fibers. Unreinforced counterparts served as control. The samples were fixed on the abutments after thermocycling and then received a fatigue test. Subsequently, they were mechanically loaded until fracture, and the initial fracture load and fracture patterns were recorded. Statistical analysis, including two-sample t-test, one-way, two-way ANOVA, Tukey-Kramer HSD post hoc analysis and χ2 test were used to evaluate mechanical performance. RESULTS: The mean fracture load of FPDs with 14 mm pontic span length is significantly higher than the other lengths. The fracture load of each reinforced group is significantly higher than each counterpart control. There is no interaction between two variables, pontic span and fiber reinforcement. With fiber reinforcement, the fracture patterns were altered from catastrophic fracture to bent or partial fracture. But, the fracture patterns were not affected by pontic span. CONCLUSION: The fracture load of acrylic FPDs decreases significantly when pontic span length is greater than 17 mm. Adding glass fibers into long-span provisional FPDs can significantly improve the fracture resistance and fracture patterns.