Combustion performance and emissions from torrefied and water washed biomass using a kg-scale burner.

This study investigates wastes and biomass as alternative fuels in a kg-scale burner in terms of combustion characteristics and emissions. Water washing, torrefaction, and their combination are used to improve the properties of the wastes and biomass. The air pollutants in the exhaust of the burner are also analyzed. It could be concluded that the reactivity and average heat supply from the pretreatment are improved significantly. The improvement ratio of average heat supply can be up to 103.5 %, stemming from water-soluble ash removal during water washing. Torrefaction can lift the average heat supply due to the increment of fixed carbon content in the fuels, but it reduces the reactivity owing to the decrement of volatile matters. Most of the raw or pretreated materials can be directly combusted, as a result of lower regulated air pollutants (e.g., NOx, SO2, CO) from them than from coal. Water washing can successfully remove chlorine in the wastes by dissolution since most of the chlorine in the wastes are in salt form. The chlorine reduction significantly reduces the HCl concentration (55-58 % reduction efficiency) and the toxicity concentration of polychlorinated dibenzo-p-dioxins and dibenzofurans (78-84 %), while torrefaction increases the toxicity concentration owing to the de novo synthesis.

Characterization of spent nickel-metal hydride batteries and a preliminary economic evaluation of the recovery processes.

UNLABELLED: Valuable metal materials can be recovered from spent nickel-metal hydride (NiMH) batteries. However, little attention has been paid to the metal compositions of individual components of NiMH batteries, although this is important for the selection of the appropriate recycling process. In this study, NiMH batteries were manually disassembled to identify the components and to characterize the metals in each of these. A preliminary economic analysis was also conducted to evaluate the recovery of valuable metals from spent NiMH batteries using thermal melting versus simple mechanical separation. The results of this study show that metallic components account for more than 60% of battery weight. The contents of Ni, Fe, Co, and rare earth elements (REEs) (i.e., valuable metals of interest for recovery) in a single battery were 17.9%, 15.4%, 4.41%, and 17.3%, respectively. Most of the Fe was in the battery components of the steel cathode collector, cathode cap, and anode metal grid, while Ni (>90%) and Co (>90%) were mainly in the electrode active materials (anode and cathode metal powders). About 1.88 g of REEs (Ce, La, and Y) could be obtained from one spent NiMH battery. The estimated profits from recovering valuable metals from spent NiMH batteries by using thermal melting and mechanical processes are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. The findings of this study are very useful for further research related to technical and economic evaluations of the recovery of valuable metals from spent NiMH batteries. IMPLICATIONS: The spent nickel-metal hydride (NiMH) batteries were manually disassembled and their components were identified. The metals account for more than 60% of battery weight, when Ni, Fe, Co, and rare earth elements (REEs) were 17.9%, 15.4%, 4.41%, and 17.3%, respectively, in a single battery. The estimated profits of recovering valuable metals from NiMH batteries by using thermal melting and mechanical processing are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. These findings are very useful to develop or select the recovery methods of valuable metals from spent NiMH batteries.

Spectroscopic and functional characterizations of cyanobacterium Synechocystis PCC 6803 mutants on and near the heme axial ligand of cytochrome b559 in photosystem II.

The functional role of cytochrome (cyt) b(559) in photosystem II (PSII) was investigated in H22K alpha and Y18S alpha cyt b(559) mutants of the cyanobacterium Synechocystis sp. PCC6803. H22K alpha and Y18S alpha cyt b(559) mutant carries one amino acid substitution on and near one of heme axial ligands of cyt b(559) in PSII, respectively. Both mutants grew photoautotrophically, assembled stable PSII, and exhibited the normal period-four oscillation in oxygen yield. However, both mutants showed several distinct chlorophyll a fluorescence properties and were more susceptible to photoinhibition than wild type. EPR results indicated the displacement of one of the two axial ligands to the heme of cyt b(559) in H22K alpha mutant reaction centers, at least in isolated reaction centers. The maximum absorption of cyt b(559) in Y18S alpha mutant PSII core complexes was shifted to 561 nm. Y18S alpha and H22K alpha mutant PSII core complexes contained predominately the low potential form of cyt b(559). The findings lend support to the concept that the redox properties of cyt b(559) are strongly influenced by the hydrophobicity and ligation environment of the heme. When the cyt b(559) mutations placed in a D1-D170A genetic background that prevents assembly of the manganese cluster, accumulation of PSII is almost completely abolished. Overall, our data support a functional role of cyt b(559) in protection of PSII under photoinhibition conditions in vivo.

Emissions in the exhaust of fishing boats after adding viscous agents into fuel oils.

In order to avoid the illegal use of fishing boat fuel A (FBFA) by traveling diesel vehicles (TDVs) in Taiwan, alternatives that are easily distinguished from premium diesel fuel (PDF) were prepared to evaluate their suitability. Two new ingredients, pyrolysis fuel oil (PFO) and residue of desulfurization unit (RDS), were added into FBFA and formed PFO0.5 and RDS0.5, respectively. Along with FBFA, these three fuels were analyzed for their chemical and physical properties. Furthermore, they were used by three fishing boats with different sizes, output powers, and weights. The engine performances and pollutant emissions were examined and monitored. Experimental results show that there are significant differences in appearance between PDF and the two new blended fuels (PFO0.5 and RDS0.5), and thus misuse or illegal use of FBFA could be substantially reduced. The fuel consumption, which is negatively related to the heating value of fuels, is in order of FBFA

Identification and characterization of a cytochrome b559 Synechocystis 6803 mutant spontaneously generated from DCMU-inhibited photoheterotrophical growth conditions.

We identified a spontaneously generated mutant from Synechocystis sp. PCC6803 wild-type cells grown in BG-11 agar plates containing 5 mM Glu and 10 microM DCMU. This mutant carries an R7L mutation on the alpha-subunit of cyt b559 in photosystem II (PSII). In the recent 2.9 A PSII crystal structural model, the side chain of this arginine residue is in close contact with the heme propionates of cyt b559. We called this mutant WR7Lalpha cyt b559. This mutant grew at about the same rate as wild-type cells under photoautotrophical conditions but grew faster than wild-type cells under photoheterotrophical conditions. In addition, 77 K fluorescence and 295 K chlorophyll a fluorescence spectral results indicated that the energy delivery from phycobilisomes to PSII reaction centers was partially inhibited or uncoupled in this mutant. Moreover, WR7Lalpha cyt b559 mutant cells were more susceptible to photoinhibition than wild-type cells under high light conditions. Furthermore, our EPR results indicated that in a significant fraction of mutant reaction centers, the R7Lalpha cyt b559 mutation induced the displacement of one of the axial histidine ligands to the heme of cyt b559. On the basis of these results, we propose that the Arg7Leu mutation on the alpha-subunit of cyt b559 alters the interaction between the APC core complex and PSII reaction centers, which reduces energy delivery from the antenna to the reaction center and thus protects mutant cells from DCMU-induced photo-oxidative stress.

Polychlorinated dibenzo-p-dioxin and dibenzofuran emissions from an industrial park clustered with metallurgical industries.

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from an industrial park operated as Taiwan's center of metallurgical industries were investigated. The characteristics of mean PCDD/F I-TEQ concentrations, congener profiles and emission factors of each source were studied over samples of stack flue gases of individual sources. Different characteristics of congener profiles and large variations of emission factors of secondary aluminum smelters (ALSs) were observed. The mean emission factors of electric arc furnaces were comparable to those for ALSs and much greater than those of municipal solid waste incinerators and sinter plants, but still less than that of clinical waste incinerators. Annual PCDD/F emission contribution of each source was estimated, raising critical concerns over the overall PCDD/F emissions from metallurgical processes. The metallurgical industries altogether contributed approximately 98.1% of the total annual emissions, while waste incinerators only 1.9%. The contributions by sinter plants and metallurgical industries to the total annual emissions of the Park were much higher than the corresponding national averages of Taiwan. The combined dioxin emissions from the entire metallurgical processes and their controls should be seriously envisaged by industrial parks devoted to metal productions.

A seasonality study of polychlorinated dibenzo-p-dioxins and dibenzofurans in ambient air in Kaohsiung (Taiwan) clustered with metallurgical industries.

As a comprehensive monitoring survey on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in Kaohsiung, 40 ambient air samples taken from 10 locations in four seasons were studied. PCDD/F concentrations at 0.312-4.58pgNm(-3) and I-TEQ values, ranging from 0.0319 to 0.256pgNm(-3) were determined for these samples, which were comparable to those of other urban cities. However, unlike studies on some other urban cities, the ambient air in Kaohsiung did not exhibit regular seasonality in PCDD/F concentrations. All samples were predominated, in common, by congeners OCDD, 1,2,3,4,6,7,8-HpCDF, 1,2,3,4,6,7,8-HpCDD, OCDF and 2,3,4,7,8-PeCDF. The congener profiles of the samples generally did not display any seasonal trend, either. The insignificant seasonality and constancy of congener profiles with time were attributed to the constant influence by emission sources in a metal-producing center, thereby resulting in high atmospheric dioxin levels in the nearby district. Principal component analyses identified that dioxin emissions in ambient air of the city originated from electric arc furnaces (EAFs) and sinter plants in the center. Concentration isopleth analyses assessing pollution sources and ambient air of the district also confirmed that its atmosphere was affected largely by the EAFs and sinter plants.

Characterization of polybrominated dibenzo-p-dioxins and dibenzofurans in different atmospheric environments.

Few studies have measured polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in the atmosphere. In this study,four categories of atmospheric environments, including rural (Kengting national park, Taitung county, and Yilan county), urban (north Kaohsiung city and south Taichung city), industrial (Lin-hai industrial park), and science park (Hsinchu science park) areas were investigated for their characteristics of 2,3,7,8-substituted PBDD/F and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The elevated PCDD/F I-TEQ concentrations and higher ratio of PCDFs to PCDDs in the industrial areas reveal that the metallurgical facilities, including sinter plants, electric arc furnaces, secondary aluminum smelters, and secondary copper smelters, significantly influence their surrounding atmospheric environments. The mean PBDD/F concentrations in the atmosphere of the rural, urban, industrial, and science park areas were 11, 24, 46, and 95 fg/Nm3, respectively, while the corresponding mean TEQ concentrations were 2.7, 6.4, 12, and 31 fg TEQ/Nm3, respectively. The significantly high correlation (r = 0.85, p = 0.034)found betweenthe PBDD/F and PCDD/F concentrations in the atmospheres of the industrial areas reveals that the metallurgical facilities are also the most likely PBDD/F emission sources in the industrial areas. The PBDD/F concentration in the science park area was approximately 2-fold higher than that in the industrial areas, whereas PCDD/F I-TEQ concentration in the area was only 23% of that in the industrial areas. The elevated PBDD/F concentrations in the science park areas may be attributed to the use of polybrominated diphenyl ethers as brominated flame retardants in the electrical and electronics industries, which contribute to direct PBDD/F emissions into the environment. PBDFs were all much more dominant than PBDDs in the atmosphere, and their mass fractions increase with PBDD/F concentrations.

Polychlorinated dibenzo-p-dioxins/dibenzofurans distributions in ash from different units in a municipal solid waste incinerator.

This study determined the polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) contents in ash in the super heater (SH), economizer (EC), semi-dryer absorber (SDA), fabric filter (FF), fly ash pit (FAP) and bottom residue (BR) in a municipal solid waste incinerator (MSWI). A high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS) was utilized for analyzing 17 PCDD/F species. Experimental results showed that average PCDD/F contents in ash samples from the SH, EC, SDA, FF, FAP and BR were 0.102, 0.788, 0.210, 1.95, 2.04 and 0.0218 ng I-TEQ g(-1), respectively. PCDD/F content was very low in the SH and BR due to high temperatures (around 461 degrees C in the SH and 914 degrees C in combustion chamber). Conversely, total PCDD/F content was significantly high in ash samples from the EC (around 340 degrees C), mainly because the temperature is within the favorable range of 250-400 degrees C for PCDD/F formation due to de nova reformation mechanisms. Although the SDA operated at 245 degrees C, the PCDD/F content decreased very significantly, mainly because the temperature was relatively low and because calcium carbonate was introduced into flue gases to dechlorinate and dilute chlorine-containing species. PCDD/Fs were captured by the active carbon in the FF. Furthermore, the duration that fly ash remained in the FF was longer than that for other incinerator units, and thus causing an increasing trend of PCDD/Fs level downstream (except the SDA). Total PCDD/Fs emission factors (microg tonnes-waste(-1); microg I-TEQ tonnes-waste(-1)) in ash samples from different units were: SH (42.3; 0.846), EC (326; 6.12), SDA (58.1; 1.10), FF (1540; 61.3), FAP (2950; 107) and BR (537; 4.31). Most PCDD/Fs in ash were contributed by the FF (about 56%), and the generation of PCDD/Fs in ash was significant (about 35%) during the transfer process from different units to the FAP. A strong and positive correlation in a logarithmic form existed between PCDD/Fs and chlorine (Cl(-1)) contents in ash. In Taiwan, the government policy for incineration residues advocates their reuse as road sub-bases or secondary building materials provided that total PCDD/Fs content is below the legal limit (1 ng I-TEQ g(-1)). Thus, ash with total PCDD/Fs content below the legal limit, such as that from the SH, EC, SDA and BR, can be collected and transferred to the FAP and reused. Ash with total PCDD/Fs content exceeding the legal limit, such as that from the FF, should be collected separately and be treated properly before being disposal in a landfill.

Site-directed mutagenesis on the heme axial-ligands of cytochrome b559 in photosystem II by using cyanobacteria Synechocystis PCC 6803.

Cytochrome (cyt) b559 has been proposed to play an important role in the cyclic electron flow processes that protect photosystem II (PSII) from light-induced damage during photoinhibitory conditions. However, the exact role(s) of cyt b559 in the cyclic electron transfer pathway(s) in PSII remains unclear. To study the exact role(s) of cyt b559, we have constructed a series of site-directed mutants, each carrying a single amino acid substitution of one of the heme axial-ligands, in the cyanobacterium Synechocystis sp. PCC6803. In these mutants, His-22 of the alpha or the beta subunit of cyt b559 was replaced with either Met, Glu, Tyr, Lys, Arg, Cys or Gln. On the basis of oxygen-evolution and chlorophyll a fluorescence measurements, we found that, among all mutants that were constructed, only the H22Kalpha mutant grew photoautotrophically, and accumulated stable PSII reaction centers ( approximately 81% compared to wild-type cells). In addition, we isolated one pseudorevertant of the H22Ybeta mutant that regained the ability to grow photoautotrophically and to assemble stable PSII reaction centers ( approximately 79% compared to wild-type cells). On the basis of 77 K fluorescence emission measurements, we found that energy transfer from the phycobilisomes to PSII reaction centers was uncoupled in those cyt b559 mutants that assembled little or no stable PSII. Furthermore, on the basis of immunoblot analyses, we found that in thylakoid membranes of cyt b559 mutants that assembled little or no PSII, the amounts of the D1, D2, cyt b559alpha and beta polypeptides were very low or undetectable but their CP47 and PsaC polypeptides were accumulated to the wild-type level. We also found that the amounts of cyt b559beta polypeptide were significantly increased (larger than two folds) in thylakoid membranes of cyt b559 H22YbetaPS+ mutant cells. We suspected that the increase in the amounts of cyt b559 H22YbetaPS+ mutant polypeptides in thylakoid membranes might facilitate the assembly of functional PSII in cyt b559 H22YbetaPS+ mutant cells. Moreover, we found that isolated His-tagged PSII particles from H22Kalpha mutant cells gave rise to redox-induced optical absorption difference spectra of cyt b559. Therefore, our results concluded that significant fractions of H22Kalpha mutant PSII particles retained the heme of cyt b559. Finally, this work is the first report of cyt b559 mutants having substitutions of an axial heme-ligands that retain the ability to grow photoautotrophically and to assemble stable PSII reaction centers. These two cyt b559 mutants (H22Kalpha and H22YbetaPS+) and their PSII reaction centers will be very suitable for further biophysical and biochemical studies of the functional role(s) of cyt b559 in PSII.

Effects of ethylene glycol and methanol on ammonia-induced structural changes of the oxygen-evolving complex in photosystem II.

Ammonia is an inhibitor of water oxidation and a structural analogue for substrate water, making it a valuable probe for the structural properties of the possible substrate-binding site on the oxygen-evolving complex (OEC) in photosystem II (PSII). By using the NH(3)-induced upshift of the 1365 cm(-)(1) IR mode in the S(2)Q(A)(-)/S(1)Q(A) spectrum and the NH(3)-modified S(2) state EPR signals of PSII as spectral probes, we found that ethylene glycol has clear effects on the binding properties of the NH(3)-specific site on the OEC. Our results show that in PSII samples containing 30% (v/v) ethylene glycol, the affinity of the NH(3)-specific binding site on the OEC is estimated to be more than 10 times lower than that in PSII samples containing 0.4 M sucrose. In addition, our results show that the NH(3)-induced upshift of the 1365 cm(-)(1) IR mode in the S(2)Q(A)(-)/S(1)Q(A) spectrum is dependent on the concentration of ethylene glycol, but not dependent on the concentration of sucrose (up to 1.5 M) or methanol (up to 5.4 M). By comparing the concentration dependence of sucrose and ethylene glycol on NH(3)-induced spectral change and also by comparing the sucrose and ethylene glycol data at similar concentrations ( approximately 1 M), we conclude that ethylene glycol has a clear effect on the NH(3)-induced spectral changes. Furthermore, our results also show that ethylene glycol alters the steric requirement of the amine effect on the upshift of the 1365 cm(-)(1) mode in the S(2)Q(A)(-)/S(1)Q(A) spectrum. In PSII samples containing 30% (v/v) ethylene glycol, only NH(3), not other bulkier amines (e.g., Tris, AEPD, and CH(3)NH(2)), has a clear effect on the upshift of the 1365 cm(-)(1) mode in the S(2)Q(A)(-)/S(1)Q(A) spectrum; in contrast, in PSII samples containing 0.4 M sucrose, both NH(3) and CH(3)NH(2) have a clear effect. On the basis of the results mentioned above, we propose that ethylene glycol acts directly or indirectly to decrease the affinity or limit the accessibility of NH(3) and CH(3)NH(2) to the NH(3)-specific binding site on the OEC in PSII. Finally, we also applied the same approach to test whether methanol is able to compete with ammonia on its binding site on the OEC. We found that 4% (v/v) methanol does not have any significant effect on the NH(3)-induced upshift of the 1365 cm(-)(1) mode in the S(2)Q(A)(-)/S(1)Q(A) spectrum and the NH(3)-modified S(2) state g = 2 multiline EPR signal. Our results suggest that methanol is unable to compete with NH(3) upon binding to the Mn site of the OEC that gives rise to the altered S(2) state g = 2 multiline EPR signal.