ABSTRACT
Buckling-driven delamination is considered among the most critical failure modes in composite laminates. This paper examines the propagation of delaminations in a beam under pure bending. A pre-developed analytical model to predict the critical buckling moment of a thin sub-laminate is extended to account for propagation prediction, using mixed-mode fracture analysis. Fractography analysis is performed to distinguish between mode I and mode II contributions to the final failure of specimens. Comparison between experimental results and analysis shows agreement to within 5 per cent in static propagation moment for two different materials. It is concluded that static fracture is almost entirely driven by mode II effects. This result was unexpected because it arises from a buckling mode that opens the delamination. For this reason, and because of the excellent repeatability of the experiments, the method of testing may be a promising means of establishing the critical value of mode II fracture toughness, G(IIC), of the material. Fatigue testing on similar samples showed that buckled delamination resulted in a fatigue threshold that was over 80 per cent lower than the static propagation moment. Such an outcome highlights the significance of predicting snap-buckling moment and subsequent propagation for design purposes.
ABSTRACT
Parallels are drawn between the response of a discrete strut on a linear elastic foundation and force-chain buckling in a constrained granular medium. Both systems buckle initially into periodic shapes, with wavelengths that depend on relative resistances to lateral displacement, and curvature in the buckled shape. Under increasing end shortening, the classical structural model evolves to a localized form extending over a finite number of contributing links. By analogy, it is conjectured that the granular model of force-chain buckling might follow much the same evolutionary route into a shear band.
ABSTRACT
Motivated by recent experimental results, an explanation is sought for the asymmetry in the radial profile of basilar membrane vibrations in the inner ear. A sequence of one-dimensional beam models is studied which take into account variations in the bending stiffness of the basilar membrane as well as the potential presence of structural hinges. The results suggest that the main cause of asymmetry is likely to be differences between the boundary conditions at the two extremes of the basilar membrane's width. This has fundamental implications for more detailed numerical simulations of the entire cochlea.
