Vibrant reflective sensors with percolation film Fabry-Pérot nanocavities.

Dynamically reconfigurable structural colors are promising materials for new smart optical systems. However, improved reflected color quality (e.g., saturation, optical contrast, angular invariance) and larger tuning range/sensitivity are needed. Here, we demonstrate a vibrant, actively tunable system which meets these needs via coupling broadband plasmonic resonators to a responsive polymer film. Our structure consists of near-percolation gold nanoislands deposited on a poly[methyl methacrylate] (PMMA) spacer above a gold mirror, forming a Fabry-Pérot nanocavity. Broadband absorption in this system creates vivid reflected colors, while the polymer spacer enables continuous tuning over a wide color space. By exploiting swelling effects in PMMA, we show fast, reversible color switching in response to organic vapors. Our sensitive optical structure amplifies small vapor-induced changes in the spacer thickness, enabling naked-eye detection of changes as small as 10 nm. Additionally, optical absorption >99% yields modulation contrasts up to 80:1, opening the door to ultra-sensitive on-chip signal measurements, complementing the visual colorimetric readout. This structure has immediate implications for colorimetric bio/chemical sensing and may also find application to reflective displays and flexible/adaptive optical coatings.

Metallic photonic crystal-based sensor for cryogenic environments.

We investigate the design, characterization, and application of metallic photonic crystal (MPC) structures, consisting of plasmonic gold nanogratings on top of a photonic waveguide, as transducers for lab-on-chip biosensing in cryogenic environments. The compact design offers a promising approach to sensitive, in situ biosensing platforms for astrobiology applications (e.g., on the "icy moons" of the outer solar system). We fabricated and experimentally characterized three MPC sensor geometries, with variable nanograting width, at temperatures ranging from 300 K to 180 K. Sensors with wider nanogratings were more sensitive to changes in the local dielectric environment. Temperature-dependent experiments revealed an increase in plasmonic resonance intensity of around 13% at 180 K (compared with 300 K), while the coupled plasmonic-photonic resonance was less sensitive to temperature, varying by less than 5%. Simulation results confirm the relative temperature stability of the plasmonic-photonic mode and, combined with its high sensitivity, suggest a novel application of this mode as the sensing transduction mechanism over wide temperature ranges. To our knowledge, this is among the first reports of the design and characterization of a nanoplasmonic sensor specifically for low-temperature sensing operation.

Shape-controlled synthesis of palladium and copper superlattice nanowires for high-stability hydrogen sensors.

For hydrogen sensors built with pure Pd nanowires, the instabilities causing baseline drifting and temperature-driven sensing behavior are limiting factors when working within a wide temperature range. To enhance the material stability, we have developed superlattice-structured palladium and copper nanowires (PdCu NWs) with random-gapped, screw-threaded, and spiral shapes achieved by wet-chemical approaches. The microstructure of the PdCu NWs reveals novel superlattices composed of lattice groups structured by four-atomic layers of alternating Pd and Cu. Sensors built with these modified NWs show significantly reduced baseline drifting and lower critical temperature (259.4 K and 261 K depending on the PdCu structure) for the reverse sensing behavior than those with pure Pd NWs (287 K). Moreover, the response and recovery times of the PdCu NWs sensor were of ~9 and ~7 times faster than for Pd NWs sensors, respectively.

Synthesis methods, microscopy characterization and device integration of nanoscale metal oxide semiconductors for gas sensing.

A comparison is made between SnO(2), ZnO, and TiO(2) single-crystal nanowires and SnO(2) polycrystalline nanofibers for gas sensing. Both nanostructures possess a one-dimensional morphology. Different synthesis methods are used to produce these materials: thermal evaporation-condensation (TEC), controlled oxidation, and electrospinning. Advantages and limitations of each technique are listed. Practical issues associated with harvesting, purification, and integration of these materials into sensing devices are detailed. For comparison to the nascent form, these sensing materials are surface coated with Pd and Pt nanoparticles. Gas sensing tests, with respect to H(2), are conducted at ambient and elevated temperatures. Comparative normalized responses and time constants for the catalyst and noncatalyst systems provide a basis for identification of the superior metal-oxide nanostructure and catalyst combination. With temperature-dependent data, Arrhenius analyses are made to determine activation energies for the catalyst-assisted systems.

Applied breath analysis: an overview of the challenges and opportunities in developing and testing sensor technology for human health monitoring in aerospace and clinical applications.

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A family of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption, and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity. However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This paper gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology. Clinical applications and the potential impact to the biomedical field of miniaturized smart gas sensor technology are discussed.