Salophen-type Organocatalysts for the Cycloaddition of CO2 and Epoxides under Solvent, Halide, and Metal-Free Conditions.

8-Formyl-7-hydroxycoumarin (A) and their derived salophen-type organocatalysts L1, L2, and L3 were used for the synthesis of cyclic carbonates from carbon dioxide (CO2) and epoxides under solvent-, halide-, and metal-free conditions. According to previous optimization tests, L1 and L2 had the best catalytic activity presenting 89 and 92% conversion toward the synthesis of 3-chloropropylene carbonate (2c) using 8 bar CO2, 100 °C at 9 h. Therefore, they were used as organocatalysts to complete the catalytic screening with 11 terminal epoxides (1a-k) exhibiting the highest TOF values of 20 and 22 h-1 using 1c and 1b, respectively. Similarly, they were tested with an internal epoxide, such as cyclohexene oxide (1l) exhibiting 72% conversion, becoming the first salophen organocatalyst to obtain cis-cyclohexane carbonate (2l) in the absence of a cocatalyst. In addition, a reaction mechanism was proposed for the formation of cyclic carbonates based on experimental data and computational techniques; these contributed in establishing a probable role of CO2 pressure along the catalysis and the hydrogen bonds that favor the stabilization of the different intermediates of the reaction.

Air-Stable Cobalt(III) and Chromium(III) Complexes as Single-Component Catalysts for the Activation of Carbon Dioxide and Epoxides.

Cobalt(III) and chromium(III) salophen chloride complexes were synthesized and tested for the cycloaddition of carbon dioxide (CO2) with epoxides to obtain cyclic carbonates. The cat1, cat2, cat4, and cat5 complexes presented high catalytic activity without cocatalysts and are solvent-free at 100 °C, 8 bar, and 9 h. At these conditions, the terminal epoxides (1a-1k) were successfully converted into the corresponding cyclic carbonates with a maximum conversion of ∼99%. Moreover, cat5 was highlighted due to its capability of opening internal epoxides such as limonene oxide (1l) with a 36% conversion to limonene carbonate (2l), and from cyclohexene oxide (1m), cyclic trans-cyclohexene carbonate (2m) and poly(cyclohexene carbonate) were obtained with 15% and 85% selectivity, respectively. A study of the coupling reaction mechanism was proposed with the aid of electrospray ionization mass spectrometry (ESI-MS) analysis, confirming the single-component behavior of the complexes through their ionization due to epoxide coordination. In addition, crystallographic analysis of cat1 single crystals grown in a saturated solution of pyridine helped to demonstrate that the substitution of chloride ion by pyridine ligands to form an octahedral coordination occurs (Py-cat1), supporting the proposed mechanism. Also, a recyclability study was performed for cat5, and a total turnover number of 952 was obtained with only minor losses in catalytic activity after five cycles.

Antifungal activity of Co(II) and Cu(II) complexes containing 1,3-bis(benzotriazol-1-yl)-propan-2-ol on the growth and virulence traits of fluconazole-resistant Candida species: synthesis, DFT calculations, and biological activity.

Relevant virulence traits in Candida spp. are associated with dimorphic change and biofilm formation, which became an important target to reduce antifungal resistance. In this work, Co(II) complexes containing a benzotriazole derivative ligand showed a promising capacity of reducing these virulence traits. These complexes exhibited higher antifungal activities than the free ligands against all the Candida albicans and non-albicans strains tested, where compounds 2 and 4 showed minimum inhibitory concentration values between 15.62 and 125 µg mL-1. Moreover, four complexes (2-5) of Co(II) and Cu(II) with benzotriazole ligand were synthesized. These compounds were obtained as air-stable solids and characterized by melting point, thermogravimetric analysis, infrared, Raman and ultraviolet/visible spectroscopy. The analysis of the characterization data allowed us to identify that all the complexes had 1:1 (M:L) stoichiometries. Additionally, Density Functional Theory calculations were carried out for 2 and 3 to propose a probable geometry of both compounds. The conformer Da of 2 was the most stable conformer according to the Energy Decomposition Analysis; while the conformers of 3 have a fluxional behavior in this analysis that did not allow us to determine the most probable conformer. These results provide an important platform for the design of new compounds with antifungal activities and the capacity to attack other target of relevance to reduce antimicrobial resistance.

Electrochemical Determination of Morin in Natural Food Using a Chitosan-Graphene Glassy Carbon Modified Electrode.

This report presents a new application for the chitosan-graphene glassy carbon electrode (Ch-G/GCE) system in the determination of the hydroxyflavonoid morin (MR), one of the flavonoids with the highest favorable activity for people, due to its natural properties by square-wave voltammetry (SWV). The anodic peak current for MR was observed at 0.50 V with an increase of 73% compared with the glassy carbon electrode unmodified. The surface areas of Ch-G/GCE, Ch/GCE and GCE evaluated by cyclic voltammetry were 0.140, 0.053 and 0.011 cm2, respectively. Additionally, an increase greater than 100% compared to the electrode without modification was observed. The detection limit was 0.30 µmol/L for MR, and the relative standard deviations (RSDs) were 1.8% (n = 6). Possible interferences as quercetin, rutin, and applications in real samples were also evaluated with very acceptable results.

Enantioselective Reductive Oligomerization of Carbon Dioxide into l-Erythrulose via a Chemoenzymatic Catalysis.

A cell-free enantioselective transformation of the carbon atom of CO2 has never been reported. In the urgent context of transforming CO2 into products of high value, the enantiocontrolled synthesis of chiral compounds from CO2 would be highly desirable. Using an original hybrid chemoenzymatic catalytic process, we report herein the reductive oligomerization of CO2 into C3 (dihydroxyacetone, DHA) and C4 (l-erythrulose) carbohydrates, with perfect enantioselectivity of the latter chiral product. This was achieved with the key intermediacy of formaldehyde. CO2 is first reduced selectively by 4e- by an iron-catalyzed hydroboration reaction, leading to the isolation and complete characterization of a new bis(boryl)acetal compound derived from dimesitylborane. In an aqueous buffer solution at 30 °C, this compound readily releases formaldehyde, which is then involved in selective enzymatic transformations, giving rise either (i) to DHA using a formolase (FLS) catalysis or (ii) to l-erythrulose with a cascade reaction combining FLS and d-fructose-6-phosphate aldolase (FSA) A129S variant. Finally, the nature of the synthesized products is noteworthy, since carbohydrates are of high interest for the chemical and pharmaceutical industries. The present results prove that the cell-free de novo synthesis of carbohydrates from CO2 as a sustainable carbon source is a possible alternative pathway in addition to the intensely studied biomass extraction and de novo syntheses from fossil resources.

Photoelectrochemical Stability under Anodic and Cathodic Conditions of Meso-Tetra-(4-Sulfonatophenyl)-Porphyrinato Cobalt (II) Immobilized in Polypyrrole Thin Films.

Cobalt porphyrins have emerged as promising catalysts for electrochemical and photoelectrochemical applications because of their good performance, low cost and the abundance of cobalt in the earth. Herein, a negatively charged porphyrin meso-tetra-(4-sulfonatophenyl)-porphin (TPPS) was immobilized in polypyrrole (PPy) during the electro-polymerization, and then it was metallized with cobalt to obtain meso-tetra-(4-sulfonatophenyl)-porphyrinato cobalt (II) (CoTPPS) as a dopant in PPy. The coatings were evaluated as photoelectrodes towards thiosulfate oxidation and oxygen reduction. For comparison purposes, the photoelectrochemical behavior of ClO4--doped polypyrrole films was also evaluated. Characterizations by chronoamperometry, UV-Vis spectroscopy and Raman spectroscopy showed that polypyrrole is stable under anodic and cathodic conditions, but CoTPPS and TPPS immobilized in PPy are degraded during the anodic process. Thus, decreases in photocurrent of up to 87% and 97% for CoTPPS-doped PPy and TPPS-doped PPy were observed after a 30-min chronoamperometry test. On the other hand, good stability of CoTPPS and TPPS immobilized in PPy was observed during photoelectrochemical oxygen reduction, which was reflected in almost constant photocurrents obtained by chronoamperometry. These findings are relevant to understanding the role of CoTPPS as a catalyst or pre-catalyst in photoelectrochemical applications such as water splitting. In addition, these results could pave the way for further research to include CoTPPS-doped PPy in the design of novel photocathodes.

Novel complexes with ONNO tetradentate coumarin schiff-base donor ligands: x-ray structures, DFT calculations, molecular dynamics and potential anticarcinogenic activity.

The synthesis of eight novel Zn(II), Co(II), Cu(II), Ni(II) and Pt(II) complexes (2-9) derived from the ONNO tetradentate coumarin Schiff-Base donor ligands, L1 and the novel L2, was performed. All compounds were characterized by analytical, spectrometry and spectroscopy techniques. Complexes 2-4 were also characterized by DFT calculations and the structures of 5 and 6 were determined by single-crystal X-ray diffraction analysis. A cytotoxicity study was carried out through an MTT assay in the carcinogenic cell line HeLa and the noncarcinogenic cell lines HFF-1 and HaCaT. The results indicated that among all the evaluated compounds, 2 and 6 presented the best anticarcinogenic potential against HeLa cells with an IC50 of 3.5 and 4.1 µM, respectively. In addition, classical molecular dynamics simulations were performed on the synthesized coordination compounds bound to G4 DNA architectures in the scope of shedding light on their inhibition mode and the most conserved interactions that may lead to the biological activity of the compounds.

Water-Compatible Synthesis of 1,2,3-Triazoles under Ultrasonic Conditions by a Cu(I) Complex-Mediated Click Reaction.

A new monophosphine Cu(I) complex bearing bis(pyrazolyl)methane (L 1 ) (CuIL 1 PPh 3 ) was synthesized and used as a catalyst for the three-component click reaction from an alkyl halide, sodium azide, and terminal alkyne to furnish 1,4-disubstituted 1,2,3-triazoles in up to 93% yield. The catalyst is highly stable, compatible with oxygen/water, and works with total efficiency under ultrasonic condition. The structure of the complex was studied and confirmed by X-ray crystallography, finding a riveting relationship with its catalytic activity. This sustainable triazoles synthesis is distinguished by its high atom economy, low catalyst loading (up to 0.5 mol %), broad substrate scope, short reaction times, operational simplicity, and an easy gram-scale supply of a functionalized product for subsequent synthetic applications.

Electrochemical determination of paracetamol in a pharmaceutical dose by adsorptive voltammetry with a carbon paste/La2O3 microcomposite.

This paper presents a new application for microcomposites based on carbon paste (CP) and La2O3 (LaOX). This simple and versatile microcomposite (LaOX/CPE) was applied toward the determination of paracetamol (PCM) through proton oxidation by square wave adsorptive voltammetry (SWAdV). The anodic peak current for PCM increased by nearly 70.0% compared with an unmodified CP, and the detection limit was 0.020 µmol L-1. The relative standard deviations (RSDs) were 1.0% (n = 7). The accuracy of the new method was evaluated with tap water spiked with known quantities of PCM, while ascorbic acid, caffeine, and acetylsalicylic acid were used for interference studies. Finally, the usefulness of the microcomposite was shown to have acceptable results when applied to detect and quantify PCM in various forms of a pharmaceutical dose, such as solid tablets, fruit-flavored powders for colds and syrups for children.

Intermolecular interaction energies and magnetic properties of spin-isolated multinuclear CuII complexes.

Dinuclear CuII complexes with 3,5-dinitrobenzoates and 2,2'-bipyridine (2) or 1,10-phenanthroline (3) were synthesized and characterized. A complete energy framework analysis using the HF/3-21G energy model was performed which found that dispersion forces and C-H...O interactions are responsible for the crystal structure features. The magnetic properties of the complexes show a weak magnetic exchange between spins, resulting in low exchange constants of -2.72 (1) cm-1 and -1.10 (1) cm-1 for complexes (2) and (3), respectively. This results from the low overlap between magnetic orbitals induced by 3,5-dinitrobenzoate bridges and the arrangement of the magnetic orbitals. Consequently, the dinuclear complexes (2) and (3) behave as spin-isolated multinuclear CuII species in contrast to the trinuclear complex with similar ligands.

Inhibition of C. albicans Dimorphic Switch by Cobalt(II) Complexes with Ligands Derived from Pyrazoles and Dinitrobenzoate: Synthesis, Characterization and Biological Activity.

Seven cobalt(II) complexes of pyrazole derivatives and dinitrobenzoate ligands were synthesized and characterized. The single-crystal X-ray diffraction structure was determined for one of the ligands and one of the complexes. The analysis and spectral data showed that all the cobalt complexes had octahedral geometries, which was supported by DFT calculations. The complexes and their free ligands were evaluated against fungal strains of Candida albicans and emerging non-albicans species and epimastigotes of Trypanosoma cruzi. We obtained antifungal activity with a minimum inhibitory concentration (MIC) ranging from 31.3 to 250 µg mL-1. The complexes were more active against C. krusei, showing MIC values between 31.25 and 62.5 µg mL-1. In addition, some ligands (L1-L6) and complexes (5 and Co(OAc)2 · 4H2O) significantly reduced the yeast to hypha transition of C. albicans at 500 µg mL-1 (inhibition ranging from 30 to 54%). Finally, the complexes and ligands did not present trypanocidal activity and were not toxic to Vero cells. Our results suggest that complexes of cobalt(II) with ligands derived from pyrazoles and dinitrobenzoate may be an attractive alternative for the treatment of diseases caused by fungi, especially because they target one of the most important virulence factors of C. albicans.

Development of a microcomposite with single-walled carbon nanotubes and Nd2O3 for determination of paracetamol in pharmaceutical dosage by adsorptive voltammetry.

This study presents for the first time a new composite of carbon paste (CP), single-walled carbon nanotubes (SWCNTs) and Nd2O3 (NdOX). This versatile composite (NdOX-SWCNT/CPE) was applied to the oxidation of paracetamol (PCM). The newly formed surface was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The results showed greater conductivity and a higher surface area for the composite than those of the carbon paste alone. Moreover, the anodic peak currents for PCM increased from 1.6 to 3.6 µA with CPE and NdOX-SWCNT/CPE, indicating an increase of nearly 51.0% for the anodic peak current. On the other hand, the anodic peak potentials shifted from 0.67 to 0.57 V. The detection limits were 0.05 µmol/L with NdOX-SWCNT/CPE and 0.50 µmol/L with SWCNT/CPE. The relative standard deviations (RSDs) were 1.5% (n = 7). The accuracy and interference of the methods were evaluated with a urine chemistry control spiked with known quantities of PCM, uric acid, dopamine, ascorbic acid, caffeine, acetylsalicylic acid, tartrazine, sunset yellow, allure red, rutin, morin and metal ions. Finally, the novelty and usefulness of the composite were evaluated to quantify PCM in pharmaceutical dosage forms such as tablets, powders and syrups for children.

Electrocomposite Developed with Chitosan and Ionic Liquids Using Screen-Printed Carbon Electrodes Useful to Detect Rutin in Tropical Fruits.

This work reports the development of a composite of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BP4) and chitosan (CS) described in previous reports through a new method using cyclic voltammetry with 10 cycles at a scan rate of 50.0 mV s-1. This method is different from usual methods such as casting, deposition, and constant potential, and it allows the development of an electroactive surface toward the oxidation of rutin by stripping voltammetry applied to the detection in tropical fruits such as orange, lemon, and agraz (Vaccinium meridionale Swartz), with results similar to those reported in previous studies. In addition, the surface was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and Raman spectroscopy. The limit of detection was 0.07 µmol L-1 and the relative standard deviation (RSD) of 10 measurements using the same modified electrode was 0.86%. Moreover, the stability of the sensor was studied for six days using the same modified electrode, where the variation of the signal using a known concentration of rutin (RT) was found to be less than 5.0%. The method was validated using a urine chemistry control spiked with known amounts of RT and possible interference was studied using ten substances including organic and biological compounds, metal ions, and dyes. The results obtained in this study demonstrated that this electrodeveloped composite was sensitive, selective, and stable.

Development of Antibacterial and Antifungal Triazole Chromium(III) and Cobalt(II) Complexes: Synthesis and Biological Activity Evaluations.

In this work, six complexes (2⁻7) of Cr(III) and Co(II) transition metals with triazole ligands were synthesized and characterized. In addition, a new ligand, 3,5-bis(1,2,4-triazol-1-ylmethyl)toluene (1), was synthesized and full characterized. The complexes were obtained as air-stable solids and characterized by melting point, electrical conductivity, thermogravimetric analysis, and Raman, infrared and ultraviolet/visible spectroscopy. The analyses and spectral data showed that complexes 3⁻7 had 1:1 (M:L) stoichiometries and octahedral geometries, while 2 had a 1:2 (M:L) ratio, which was supported by DFT calculations. The complexes and their respective ligands were evaluated against bacterial and fungal strains with clinical relevance. All the complexes showed higher antibacterial and antifungal activities than the free ligands. The complexes were more active against fungi than against bacteria. The activities of the chromium complexes against Candida tropicalis are of great interest, as they showed minimum inhibitory concentration 50 (MIC50) values between 7.8 and 15.6 µg mL-1. Complexes 5 and 6 showed little effect on Vero cells, indicating that they are not cytotoxic. These results can provide an important platform for the design of new compounds with antibacterial and antifungal activities.

Study of the Effect of Metal Complexes on Morphology and Viability of Embryonated Toxocara canis Eggs.

An organic salt and four metal complexes derived from azole were evaluated against embryonated Toxocara canis eggs (TCE). The new organic salt, (LH)+(FeCl4)-, where L = 3,5-bis(3,5-dimethylpyrazole-1-ylmethyl)toluene (5), a potential environmental disinfectant, was isolated as an air-stable yellow solid and characterized by elemental analysis, electrical conductivity, mass spectrometry, and infrared and ultraviolet/visible spectroscopy. In addition, the structure of 5 was determined by single-crystal X-ray diffraction. Compound 2 showed high anti-TCE activity. Interestingly, these compounds showed little effect on hepatocytes, indicating that they are not cytotoxic. These results will assist in the design of anti-TCE compounds.

Antibacterial Activities of Azole Complexes Combined with Silver Nanoparticles.

Growing antimicrobial resistance is considered a potential threat for human health security by health organizations, such as the WHO, CDC and FDA, pointing to MRSA as an example. New antibacterial drugs and complex derivatives are needed to combat the development of bacterial resistance. Six new copper and cobalt complexes of azole derivatives were synthesized and isolated as air-stable solids and characterized by melting point analyses, elemental analyses, thermogravimetric analyses (TGA), and infrared and ultraviolet/visible spectroscopy. The analyses and spectral data showed that the complexes had 1:1 (M:L) stoichiometries and tetrahedral geometries, the latter being supported by DFT calculations. The antibacterial activities of the metal complexes by themselves and combined with silver nanoparticles (AgNPs; 2 µg mL-1) were assessed in vitro by broth microdilution assays against eight bacterial strains of clinical relevance. The results showed that the complexes alone exhibited moderate antibacterial activities. However, when the metal complexes were combined with AgNPs, their antibacterial activities increased (up to 10-fold in the case of complex 5), while human cell viabilities were maintained. The minimum inhibitory concentration (MIC50) values were in the range of 25-500 µg mL-1. This study thus presents novel approaches for the design of materials for fighting bacterial resistance. The use of azole complexes combined with AgNPs provides a new alternative against bacterial infections, especially when current treatments are associated with the rapid development of antibiotic resistance.

Polymers of ε-Caprolactone Using New Copper(II) and Zinc(II) Complexes as Initiators: Synthesis, Characterization and X-Ray Crystal Structures.

Five of six new Zn(II) and Cu(II) complexes were active in the ring-opening polymerization (ROP) of ε-caprolactone (CL) under solvent-free conditions, producing polycaprolactones (PCLs) of high crystallinity with molecular weights between 22,900 and 38,700 g mol-1 and decomposition temperatures above 260 °C. ¹H NMR analysis demonstrated that the PCLs obtained were mainly linear, having hydroxymethylene groups at the chain ends. The results obtained indicated a significant improvement in terms of the ratio of monomer:initiator compared to related Cu(II) and Zn(II) complexes. In addition, the structures of the complexes 1 and 4 were determined by single-crystal X-ray diffraction. The synthesis and full characterization of all complexes are described in this paper.

Coordination Polymers Containing 1,3-Phenylenebis-((1H-1,2,4-triazol-1-yl)methanone) Ligand: Synthesis and ε-Caprolactone Polymerization Behavior.

The reaction of isophthaloyl dichloride with 1H-1,2,4-triazole afforded the new ligand 1,3-phenylenebis(1,2,4-triazole-1-yl)methanone (1). A series of Co(II), Cu(II), Zn(II) and Ni(II) complexes were synthesized using 1 and then characterized by melting point analysis, elemental analysis, theoretical calculations, thermogravimetric analysis, X-ray powder diffraction, nuclear magnetic resonance, infrared and Raman spectroscopy. Experimental and computational studies predict the formation of coordination polymers (CPs). The cobalt and copper CPs and zinc(II) complex were found to be good initiators for the ring-opening polymerization of ε-caprolactone (CL) under solvent-free conditions. ¹H-NMR analysis showed that the obtained polymers of CL were mainly linear and had terminal hydroxymethylene groups. Differential scanning calorimetry showed that the obtained polycaprolactones had high crystallinity, and TGA showed that they had decomposition temperatures above 400 °C. These results provide insight and guidance for the design of metal complexes with potential applications in the polymerization of CL.

Crystal structure of 1,3-bis-(1H-benzotriazol-1-yl-meth-yl)benzene.

The mol-ecular structure of the title compound, C20H16N6, contains two benzotriazole units bonded to a benzene nucleus in a meta configuration, forming dihedral angles of 88.74 (11) and 85.83 (10)° with the central aromatic ring and 57.08 (9)° with each other. The three-dimensional structure is controlled mainly by weak C-H⋯N and C-H⋯π inter-actions. The mol-ecules are connected in inversion-related pairs, forming the slabs of infinite chains that run along the [-110] and [110] directions.