ABSTRACT
OBJECTIVES: This study aims to assess the risk of peri-implantitis (PI) onset among different implant systems and evaluate the severity of the disease from a population of patients treated in a university clinic. Furthermore, this study intends to thoroughly examine the surface properties of the implant systems that have been identified and investigated. MATERIAL AND METHODS: Data from a total of six hundred and 14 patients were extracted from the Institute of Clinical Dentistry, Dental Faculty, University of Oslo. Subject- and implant-based variables were collected, including the type of implant, date of implant installation, medical records, recall appointments up to 2022, periodontal measurements, information on diabetes, smoking status, sex, and age. The outcome of interest was the diagnosis of PI, defined as the occurrence of bleeding on probing (BoP), peri-implant probing depth (PD) ≥ 5 mm, and bone loss (BL). Data were analyzed using multivariate linear and logistic regression. Scanning electron microscopy, light laser profilometer, and X-ray photoelectron spectroscopy were utilized for surface and chemical analyses. RESULTS: Among the patients evaluated, 6.8% were diagnosed with PI. A comparison was made between two different implant systems: Dentsply Sirona, OsseospeedTM and Straumann SLActive, with mean follow-up times of 3.84 years (SE: 0.15) and 3.34 years (SE: 0.15), respectively. The surfaces have different topographies and surface chemistry. However, no significant association was found between PI and implant surface/system, including no difference in the onset or severity of the disease. Nonetheless, plaque control was associated with an increased risk of developing PI, along with the gender of the patient. Furthermore, patients suffering from PI exhibited increased BL in the anterior region. CONCLUSION: No differences were observed among the evaluated implant systems, although the surfaces have different topography and chemistry. Factors that affected the risk of developing PI were plaque index and male gender. The severity of BL in patients with PI was more pronounced in the anterior region. Consequently, our findings show that success in implantology is less contingent on selecting implant systems and more on a better understanding of patient-specific risk factors, as well as on implementing biomaterials that can more effectively debride dental implants.
Subject(s)
Dental Implants , Peri-Implantitis , Surface Properties , Humans , Male , Female , Peri-Implantitis/etiology , Dental Implants/adverse effects , Middle Aged , Aged , AdultABSTRACT
Eradicating biofouling from implant surfaces is essential in treating peri-implant infections, as it directly addresses the microbial source for infection and inflammation around dental implants. This controlled laboratory study examines the effectiveness of the four commercially available debridement solutions '(EDTA (Prefgel®), NaOCl (Perisolv®), H2O2 (Sigma-Aldrich) and Chlorhexidine (GUM® Paroex®))' in removing the acquired pellicle, preventing pellicle re-formation and removing of a multi-species oral biofilm growing on a titanium implant surface, and compare the results with the effect of a novel formulation of a peroxide-activated 'Poloxamer gel (Nubone® Clean)'. Evaluation of pellicle removal and re-formation was conducted using scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy to assess the surface morphology, elemental composition and chemical surface composition. Hydrophilicity was assessed through contact angle measurements. The multi-species biofilm model included Streptococcus oralis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans, reflecting the natural oral microbiome's complexity. Biofilm biomass was quantified using safranin staining, biofilm viability was evaluated using confocal laser scanning microscopy, and SEM was used for morphological analyses of the biofilm. Results indicated that while no single agent completely eradicated the biofilm, the 'Poloxamer gel' activated with 'H2O2' exhibited promising results. It minimized re-contamination of the pellicle by significantly lowering the contact angle, indicating enhanced hydrophilicity. This combination also showed a notable reduction in carbon contaminants, suggesting the effective removal of organic residues from the titanium surface, in addition to effectively reducing viable bacterial counts. In conclusion, the 'Poloxamer gel + H2O2' combination emerged as a promising chemical decontamination strategy for peri-implant diseases. It underlines the importance of tailoring treatment methods to the unique microbial challenges in peri-implant diseases and the necessity of combining chemical decontaminating strategies with established mechanical cleaning procedures for optimal management of peri-implant diseases.
ABSTRACT
OBJECTIVES: This study aimed to determine the degree of similarity and symmetry in the anatomy of contralateral mandibular incisors. Three-dimensional (3D) models of extracted teeth were obtained from microtomography (micro-CT) scans. Qualitative and quantitative assessments of the morphology and comparison of contralateral pairs were made. The null hypothesis was that contralateral mandibular incisors could not be considered identical in simple morphometric measurements. METHODS: Sixty pairs of mandibular incisors were extracted from 30 patients and scanned with micro-CT. Virtual models of the cemento-enamel junction to the root apex were rendered. Parameters such as length, canal width, dentinal thicknesses, tortuosity, centerline length, accessory canals, root canal configurations, and root canal orifice cross-sections were used to compare the teeth. Width and thickness comparisons between paired teeth in the same individual were made by paired t-test (Wilcoxon signed-rank test for variables not normally distributed). An online randomization tool generated randomized pairs (independent of the individual/patient). Subsequently, an unpaired t-test (or Mann-Whitney U test for non-normally distributed parameters) and a correlation analysis were conducted. Canal configurations were classified according to preexisting classification schemes. The number and location of accessory canals and apical foramina were registered and compared. RESULTS: Utilizing advanced imaging techniques and quantitative analyses, our study establishes that contralateral mandibular incisors exhibit a remarkable degree of symmetry in multiple morphological parameters, including length, canal width, and dentinal thicknesses. The apical third showed a high degree of inter-variability for the contralateral pairs. The rigorous statistical analysis of the normalized parameters by Z-score showed no statistically significant differences between the contralateral mandibular incisors. Comparisons between central and lateral teeth revealed differences in root length but no significant disparity in the distribution of accessory canals. Central teeth, on average, were longer, while accessory canals were distributed relatively evenly between central and lateral teeth. CONCLUSIONS: The findings of this study further establish the significant similarities between contralateral mandibular incisors, reinforcing their suitability as a reliable substrate for root canal comparison studies. CLINICAL RELEVANCE: The absence of statistically significant differences between contralateral pairs in normalized parameters underscores their potential as a reliable reference point for root canal comparison studies in clinical dentistry. Furthermore, our findings emphasize the importance of individualized treatment planning, considering the natural symmetry in mandibular incisors to enhance clinical decision-making. This research contributes valuable insights to the field of endodontics, offering a standardized approach to sample selection and enriching the understanding of dental anatomy.
Subject(s)
Endodontics , Incisor , Humans , Incisor/diagnostic imaging , X-Ray Microtomography , Dental Pulp Cavity , Root Canal TherapyABSTRACT
Surface chemistry evaluation is crucial in assessing the efficacy of chemical decontamination products for titanium implants. This study aimed to investigate the effectiveness of chemical decontamination solutions in cleaning a contaminated dental implant surface and to evaluate the potential of combining Pluronic gel with hydrogen peroxide (NuBone®Clean) by evaluating pellicle disruption and re-formation on implant surfaces. In addition, ensuring safety with in vitro and human testing protocols. X-ray Photoelectron Spectroscopy (XPS) was utilised for surface analysis. All the tested gels had some effect on the surface cleanness except for PrefGel®. Among the tested chemical decontamination candidates, NuBone®Clean demonstrated effectiveness in providing a cleaner titanium surface. Furthermore, none of the tested chemical agents exhibited cytotoxic effects, and the safety assessment showed no adverse events. The results of this study highlight the significance of conducting comprehensive evaluations, encompassing safety and efficacy, before introducing new chemical agents for dental treatments. The findings suggest that NuBone®Clean shows potential as a chemical decontamination solution for implant surfaces. However, further investigation through randomised clinical trials is necessary. By adhering to rigorous testing protocols, the development of safe and efficient chemical decontamination strategies can be advanced, benefiting patients and promoting progress in implant dentistry.
ABSTRACT
Nanotechnology has become an emerging research field with numerous biomedical scientific applications. Silver possesses bactericidal activities that have been harnessed for centuries; however, there is a concern about the toxic effects of silver nanoparticles. This paper aims to provide an overview of silver-treated dental implants and discuss their potential to reduce the prevalence of peri-implant diseases. An electronic search was performed using PubMed. After screening, data extraction was performed on the 45 remaining articles using inclusion and exclusion criteria. Most of the articles demonstrated that silver nanoparticles embedded in a coating layer and/or on surface-treated titanium exhibit sound antibacterial effects and biocompatibility. Most of the reviewed studies revealed that silver nanoparticles on dental implant surfaces reduced cytotoxicity but provided a prolonged antibacterial effect. The cytotoxicity and antibacterial effect are closely linked to how the silver nanoparticles are released from the titanium surfaces, where a slower release increases cell viability and proliferation. However, to improve the clinical translation, there is still a need for more studies, especially evaluating the long-term systemic effects and studies recreating the conditions in the oral cavity.
ABSTRACT
BACKGROUND: A brush made of chitosan has shown to be an effective and harmless device for non-surgical treatment of mild to moderate peri-implantitis. To date, no study has evaluated the use of a chitosan brush in the non-surgical treatment of residual pockets in periodontal treatment. METHODS: Seventy-eight patients with periodontitis were included in this multicenter, randomized, examiner-blind clinical trial of 6 months duration. Patients with residual probing pocket depth (PPD) of ≥5 mm and ≤7 mm following previous active periodontal treatment were included. Patients were assigned either subgingival treatment with curettes (control) or an oscillating chitosan brush (test). Changes in bleeding on probing (BoP) and PPD between baseline and terminal evaluation at 6 months were evaluated. RESULTS: A significant reduction in both PPD and BoP was seen within both groups. There was no significant difference in BoP between test and control groups after 6 months, but the reduction in PPD was significantly improved in the test group (P ≤ 0.01). The combined outcome of no BOP and PPD ≤4 mm was significantly better in the test group (P ≤ 0.01). No adverse reactions were seen. CONCLUSION: Treatment of residual periodontal pockets (PPD = 5 to 7 mm) with a chitosan brush disclosed equal or better clinical results as compared to regular curettes. This study supports that a chitosan brush can be used for subgingival biofilm removal and soft tissue curretage in the treatment of periodontitis.
Subject(s)
Chitosan , Periodontitis , Humans , Chitosan/therapeutic use , Feasibility Studies , Periodontal Pocket/therapy , Periodontitis/therapy , Treatment OutcomeABSTRACT
OBJECTIVE: Dentists are facing a myriad of new CAD/CAM product for dental filling therapies. Are the new materials any worthwhile using? Are they succeeding the standard filling materials? Here we compare for the first time the new resin-composite blocks (RCBs) with conventional materials (Filtek Z250 and Tetric EvoCeram). METHODS: The material were tested for residual monomer elution by HPLC, thermogravimetric analysis (TG) was used to determine the percentage of fillers by weight, hardness was evaluated by Vickers method, morphology of fillers and distribution in the matrix were examined by scanning electron microscopy (SEM), elemental analysis for elemental determination of the filler particles was performed by energy-dispersive X-ray spectroscopy (EDX) cytotoxicity using human gingival fibroblasts and an epithelial cell line. RESULTS: The RBC outperformed conventional composite regarding mechanical characteristics (hardness) and monomer eluation, but showed some worrisome results regarding cytotoxicity. SIGNIFICANCE: The cost benefit is not in favour of RBCs in comparison to conventional composites, as the cytotoxicity was found higher for RBCs.
Subject(s)
Composite Resins/chemistry , Computer-Aided Design , Cell Line , Ceramics/chemistry , Ceramics/toxicity , Chromatography, High Pressure Liquid , Composite Resins/toxicity , Dental Materials/chemistry , Epithelial Cells/drug effects , Fibroblasts/drug effects , Gingiva/cytology , Hardness , Humans , Light-Curing of Dental Adhesives , Materials Testing , Microscopy, Electron, Scanning , Spectrometry, X-Ray Emission , Surface Properties , Thermogravimetry , Zirconium/chemistry , Zirconium/toxicityABSTRACT
OBJECTIVES: This study aims at evaluating and comparing mechanical, chemical, and cytotoxicological parameters of a commercial brand name composite material against two 'own brand label' (OBL) composites. METHODS: Parameters included depth of cure, flexural strength, degree of conversion, polymerization shrinkage, filler particle morphology and elemental analyzes, Vickers hardness, surface roughness parameters after abrasion, monomer elution, and cytotoxicity. RESULTS: The conventional composite outperformed the OBLS in terms of depth of cure (p<0.001), degree of cure at the first and last time intervals (p<0.001), hardness (p<0.001), and post-abrasion roughness (p<0.05). The polymerization volumetric shrinkage ranged from 2.86% to 4.13%, with the highest shrinkage seen among the OBLs. Both Monomer elution from the OBLs was statistically significantly higher (p<0.001). Statistically significantly higher cytotoxicity combined with altered morphology and loss of confluence was detected in the cells exposed to extracts from the OBLs. CONCLUSIONS: The OBLs were in general outdone by the conventional composite. CLINICAL SIGNIFICANCE: OBLs restorative materials have become pervasive in the dental market. Manufacturers often promise equal or better characteristics than existing brand-name composites, but at a lower price. Dentists are highly recommended to reconsider utilization of OBLs lacking sound scientific scrutiny, and our findings underscore this recommendation.