Using hydrogenated and perfluorinated gases to probe the interactions and structure of fluorinated ionic liquids.

After studying the properties of a mixture of hydrogenated and fluorinated ionic liquids we have measured the solubility of perfluoromethane, perfluoroethane and perfluoropropane in 1-alkyl-3-methylimidazolium based ionic liquids with hydrogenated or fluorinated alkyl side-chains: 1-octyl-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8C1Im][NTf2]), 1-octyl-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8C1Im][BETI]), 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8H4F13C1Im][NTf2]), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8H4F13C1Im][BETI]). The ionic liquids expand on mixing and mix endothermally with a relatively high enthalpy of mixing (ΔmixH for [C8C1Im]x[C8H4F13C1Im](1-x)[NTf2] of ca. 0.85 kJ mol-1 for x = 0.5) when compared with other ionic mixtures. The solubility of the perfluorinated gases is larger in the fluorinated ionic liquids when compared with that of their hydrogenated counterparts and follows the order [C8H4F13C1Im][BETI] > [C8H4F13C1Im][NTf2] > [C8C1Im][BETI] > [C8C1Im][NTf2], a behaviour explained by a slightly more favourable enthalpy of solvation. The fluorinated ionic liquids nevertheless do not dissolve larger quantities of perfluorinated gases than their hydrogenated equivalents, as observed by comparing the results herein for perfluoroethane to those measured previously for ethane in the same ionic liquids. By using molecular simulations to study the microscopic structure of the solutions, we could show that the gases, hydrogenated and fluorinated, are always preferentially solvated in the apolar domains of the ionic liquids, and the hydrogenated hydrocarbon gases are always more soluble, independent of the fluorination of the ionic liquid.

Improving Cellulose Dissolution in Ionic Liquids by Tuning the Size of the Ions: Impact of the Length of the Alkyl Chains in Tetraalkylammonium Carboxylate.

Twenty ionic liquids based on tetraalkylammonium cations and carboxylate anions have been synthesized, characterized, and tested for cellulose dissolution. The amount of cellulose dissolved in these ionic liquids depends strongly on the size of the ions: from 0 to 22 wt % cellulose can be dissolved at 90 °C. The best ionic liquids are less viscous and ammonium carboxylate based ionic liquids can dissolve as much as imidazolium-based ones. The viscosity of an ionic liquid can be decreased by the addition of DMSO as a cosolvent. After the addition of cosolvent, similar amounts of cellulose per ions are reached for most ionic liquids. As observed by rheology, ionic liquids with the longest alkyl chains form a gel when a high amount of cellulose is dissolved; this drastically limits their potential. Molecular simulations and IR spectroscopy have also been used with the aim of understanding how molecular interactions differ between efficient and inefficient ionic liquids.

Interactions between water and 1-butyl-1-methylpyrrolidinium ionic liquids.

We report experimental results on the diffusivity of water in two ionic liquids obtained using the pulsed-gradient spin-echo NMR method. Both ionic liquids have the same cation, 1-butyl-1-methylpyrrolidinium, but different trifluoromethyl-containing anions. One has a strongly hydrophobic anion, bis(trifluoromethylsulfonyl)amide, while the second has a hydrophilic anion, trifluoromethylsulfonate. Transport of water in these ionic liquids is much faster than would be predicted from hydrodynamic laws, indicating that the neutral water molecules experience a very different friction than the anions and cations at the molecular level. Temperature-dependent viscosities, conductivities, and densities are reported as a function of water concentration to further analyze the properties of the ionic liquid-water mixtures. These results on the properties of water in ionic liquids should be of interest to researchers in diverse areas ranging from separations, solubilizing biomass and energy technologies.

Preliminary study on suitability of ionic liquids as potential passive-sampling media of polyaromatic-hydrocarbon (PAH) analyses in water.

Recently, ionic liquids (ILs) have been regarded as an attractive water-immiscible phase in liquid-liquid extraction. Because ILs have a wide range of polarity irrespective of their miscibility with water, the possibility of using them as an effective extraction phase for a broad range of contaminants means they are starting to be of particular interest. In this study we investigated a wide variety of ionic liquids, which are known to be hydrolytically stable and of a hydrophobic character, for their potential suitability as passive-sampling media for monitoring selected polyaromatic hydrocarbons. Preliminary research in this field has indicated very promising results using these novel extraction media. Because there is an enormous number of possible cation-anion combinations offering tuneable properties of ionic liquids with the potential for effective passive extraction, we hope this paper will encourage the scientific community to undertake further studies verifying the undoubted usefulness of these alternative solvents as passive samplers for many other groups of analytes. Additionally, because of the unusual solubility properties that have already been proved for ILs, it is very probable that it would soon be possible to deliver a very effective system able to extract analytes differing widely in polarity.

Relevant parameters for assessing the environmental impact of some pyridinium, ammonium and pyrrolidinium based ionic liquids.

Several physico-chemical properties relevant to determine the environmental impact of ionic liquids - aqueous solubility, octanol/water partition coefficient, chromatographically derived lipophilicity and infinite dilution diffusion coefficients in water - were measured in ionic liquids based on pyridinium, ammonium and pyrrolidinium cations with bis(trifluoromethylsulfonyl)imide anions. The influence of the presence of hydroxyl or ester groups in the physico-chemical properties of these liquids was checked. It appeared that the presence of functional oxygenated moieties reduces the lipophilicity of ionic liquids and so decreases the risk of bioaccumulation in environment.

Influence of oxygen functionalities on the environmental impact of imidazolium based ionic liquids.

Several physico-chemical properties relevant to determine the environmental impact of ionic liquids - aqueous solubility, octanol-water partition coefficient and diffusion coefficients in water at infinite dilution - together with toxicity and biodegradability of ionic liquids based on 1-alkyl-3-methylimidazolium cations with or without different oxygenated functional groups (hydroxyl, ester and ether) are studied in this work. The presence of oxygen groups on the imidazolium cation reduces the toxicity of ionic liquids 1-alkyl-3-methylimidazolium with bis(trifluoromethylsulfonyl)imide or octylsulfate anions and simultaneously decreases the value of their octanol-water partition coefficient. The presence of ester functions renders the ionic liquids more easily biodegradable, especially for long alkyl side-chains in the cation but leads to hydrolysis with the formation of reaction products that accumulate. The imidazolium ring is resistant to biodegradability and to abiotic degradation. The oxygen functionalised ionic liquids are more soluble in water and, diffuse more slowly in this medium.

Polarity, viscosity, and ionic conductivity of liquid mixtures containing [C4C1im][Ntf2] and a molecular component.

In this study, we have focused on binary mixtures composed of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)-imide, [C(4)C(1)im][Ntf(2)], and a selection of six molecular components (acetonitrile, dichloromethane, methanol, 1-butanol, t-butanol, and water) varying in polarity, size, and isomerism. Two Kamlet-Taft parameters, the polarizability π* and the hydrogen bond acceptor ß coefficient were determined by spectroscopic measurements. In most cases, the solvent power (dipolarity/polarizability) of the ionic liquid is only slightly modified by the presence of the molecular component unless large quantities of this component are present. The viscosity and electrical conductivity of these mixtures were measured as a function of composition and the relationship between these two properties were studied through Walden plot curves. The viscosity of the ionic liquid dramatically decreases with the addition of the molecular component. This decrease is not directly related to the volumetric properties of each mixture or its interactions. The conductivity presents a maximum as a function of the composition and, except for the case of water, the conductivity maxima decrease for more viscous systems. The Walden plots indicate enhanced ionic association as the ionic liquid gets more diluted, a situation that is the inverse of that usually found for conventional electrolyte solutions.

The presence of functional groups key for biodegradation in ionic liquids: effect on gas solubility.

The effect of the incorporation of either ester or ester and ether functions into the side chain of an 1-alkyl-3-methylimidazolium cation on the physico-chemical properties of ionic liquids containing bis(trifluoromethylsulfonyl)imide or octylsulfate anions is studied. It is believed that the introduction of an ester function into the cation of the ionic liquids greatly increases their biodegradability. The density of three such ionic liquids is measured as a function of temperature, and the solubility of four gases-carbon dioxide, ethane, methane, and hydrogen-is determined between 303 K and 343 K and at pressures close to atmospheric level. Carbon dioxide is the most soluble gas, followed by ethane and methane; the mole fraction solubilities vary from 1.8 x 10(-3) to 3.7 x 10(-2). These solubilities are of the same order of magnitude as those determined for alkylimidazolium-based ionic liquids. The chemical modification of the alkyl side chain does not result in a significant change of the solvation properties of the ionic liquid. All of the solubilities decrease with increasing temperature, corresponding to an exothermal solvation process. From the variation of this property with temperature, the thermodynamic functions of solvation (Gibbs energy, enthalpy, and entropy) are calculated and provide information about the solute-solvent interactions and the molecular structure of the solutions.