ABSTRACT
Thin layered mats comprised of an interconnected meandering network of multiwall carbon nanotubes (MWCNT) are subjected to a hypersonic micro-projectile impact test. The mat morphology is highly compliant and while this leads to rather modest quasi-static mechanical properties, at the extreme strain rates and large strains resulting from ballistic impact, the MWCNT structure has the ability to reconfigure resulting in extraordinary kinetic energy (KE) absorption. The KE of the projectile is dissipated via frictional interactions, adiabatic heating, tube stretching, and ultimately fracture of taut tubes and the newly formed fibrils. The energy absorbed per unit mass of the film can range from 7-12 MJ kg-1, much greater than any other material.
ABSTRACT
Matrix-free assemblies of polymer-grafted nanoparticles (PGNs) enable mechanically robust materials for a variety of structural, electronic, and optical applications. Recent quasi-static mechanical studies have identified the key parameters that enhance canopy entanglement and promote plasticity of the PGNs below Tg. Here we experimentally explore the high-strain-rate shock impact behavior of polystyrene grafted NPs and compare their energy absorption capabilities to that of homopolystyrene for film thicknesses ranging from 75 to 550 nm and for impact velocities from 350 to 800 m/s. Modeling reveals that the initial shock compression results in a rapid temperature increase at the impact site. The uniformity of this heating is consistent with observations of greater kinetic energy absorption per mass (Ep*) of thinner films due to extensive visco-plastic deformation of molten film around the penetration site. Adiabatic heating is insufficient to raise the temperature at the exit surface of the thickest films resulting in increased strain localization at the impact periphery with less melt elongation. The extent and distribution of entanglements also influence Ep*. Structurally, each NP acts as a giant cross-link node, coupling surrounding nodes via the number of canopy chains per NP and the nature and number of entanglements between canopies anchored to different NPs. Load sharing via this dual network, along with geometrical factors such as film thickness, lead to extreme Ep* arising from the sequence of instantaneous adiabatic shock heating followed by visco-plastic drawing of the film by the projectile. These observations elucidate the critical factors necessary to create robust polymer-nanocomposite multifunctional films.
ABSTRACT
Hyperuniform photonic structures (HPSs) have been doped with complex index materials to increase their reflectivity and colour expression range. HPSs synthesized using dielectric SiO2 nanoparticles have been mixed with a small amount of dopant nanoparticles (c d ≤ 1%) having a complex refractive index. Various dyes including Sudan I, Sudan Blue II, Alizarin yellow GG, Bromocresol purple and polydopamine (PDA) are used as dopants. Large reflectivity enhancements of HPSs (â¼100%) are observed by resonant interference of photonic band gaps (PBGs) and optical band gaps (OBGs). Reflectivity enhancements are observed only when PBGs of HPSs match with OBGs of dopants. The colour expression range of HPS increases by 600% by doping with melanine-like PDA nanoparticles, which have the imaginary part of the refractive index in whole visible range.
ABSTRACT
Manufacturing high-performance organic electronic circuits requires the effective heterogeneous integration of different nanoscale organic materials with uniform morphology and high crystallinity in a desired arrangement. In particular, the development of high-performance organic electronic and optoelectronic devices relies on high-quality single crystals that show optimal intrinsic charge-transport properties and electrical performance. Moreover, the heterogeneous integration of organic materials on a single substrate in a monolithic way is highly demanded for the production of fundamental organic electronic components as well as complex integrated circuits. Many of the various methods that have been designed to pattern multiple heterogeneous organic materials on a substrate and the heterogeneous integration of organic single crystals with their crystal growth are described here. Critical issues that have been encountered in the development of high-performance organic integrated electronics are also addressed.
ABSTRACT
Hetero-nanorods consisting of two charge-transfer (CT) complexes were fabricated by the strained melt-molding lithography. Utilizing the lowered melting temperature by the formation of eutectic mixture, various well-defined CT complex nanorods can be easily fabricated by soft-lithography-assisted melt crystallization below 100 degrees C. Hetero-nanorods were fabricated by selective doping of the secondary CT complex at defects induced by applying the uniaxial strain.
Subject(s)
Nanotubes , Calorimetry, Differential Scanning , Microscopy, Electron, Scanning , Microscopy, FluorescenceABSTRACT
Organic semiconductors including rubrene, Alq3, copper phthalocyanine and pentacene are crystallized by the eutectic melt crystallization. Those organic semiconductors form good eutectic systems with the various volatile crystallizable additives such as benzoic acid, salicylic acid, naphthalene and 1,3,5-trichlorobenzene. Due to the formation of the eutectic system, organic semiconductors having originally high melting point (Tm > 300 °C) are melted and crystallized at low temperature (Te = 40.8-133 °C). The volatile crystallizable additives are easily removed by sublimation. For a model system using rubrene, single crystalline rubrene nanowires are prepared by the eutectic melt crystallization and the eutectic-melt-assisted nanoimpinting (EMAN) technique. It is demonstrated that crystal structure and the growth direction of rubrene can be controlled by using different volatile crystallizable additives. The field effect mobility of rubrene nanowires prepared using several different crystallizable additives are measured and compared.
