Solid-State Reaction Heterogeneity During Calcination of Lithium-Ion Battery Cathode.

During solid-state calcination, with increasing temperature, materials undergo complex phase transitions with heterogeneous solid-state reactions and mass transport. Precise control of the calcination chemistry is therefore crucial for synthesizing state-of-the-art Ni-rich layered oxides (LiNi1-x-y Cox Mny O2 , NRNCM) as cathode materials for lithium-ion batteries. Although the battery performance depends on the chemical heterogeneity during NRNCM calcination, it has not yet been elucidated. Herein, through synchrotron-based X-ray, mass spectrometry microscopy, and structural analyses, it is revealed that the temperature-dependent reaction kinetics, the diffusivity of solid-state lithium sources, and the ambient oxygen control the local chemical compositions of the reaction intermediates within a calcined particle. Additionally, it is found that the variations in the reducing power of the transition metals (i.e., Ni, Co, and Mn) determine the local structures at the nanoscale. The investigation of the reaction mechanism via imaging analysis provides valuable information for tuning the calcination chemistry and developing high-energy/power density lithium-ion batteries.

Homogenizing Silicon Domains in SiOx Anode during Cycling and Enhancing Battery Performance via Magnesium Doping.

SiOx (x ≈ 1) is one of the most promising anode materials for application in secondary lithium-ion batteries because of its high theoretical capacity. Despite this merit, SiOx has a poor initial Coulombic efficiency, which impedes its widespread use. To overcome this limitation, in this work, we successfully demonstrate a novel synthesis of Mg-doped SiOx via a mass-producible physical vapor deposition method. The solid-state reaction between Mg and SiOx produces Si and electrochemically inert magnesium silicate, thus increasing the initial Coulombic efficiency. The Mg doping concentration determines the phase of the magnesium silicate domains, the size of the Si domains, and the heterogeneity of these two domains. Detailed electron microscopy and synchrotron-based analysis revealed that the nanoscale homogeneity of magnesium silicates driven by cycling significantly affected the lifetime. We found that 8 wt % Mg is the most optimized concentration for enhanced cyclability because MgSiO3, which is the dominant magnesium silicate composition, can be homogeneously mixed with silicon clusters, preventing their aggregation during cycling and suppressing void formation.

Suppressing High-Current-Induced Phase Separation in Ni-Rich Layered Oxides by Electrochemically Manipulating Dynamic Lithium Distribution.

Understanding the cycling rate-dependent kinetics is crucial for managing the performance of batteries in high-power applications. Although high cycling rates may induce reaction heterogeneity and affect battery lifetime and capacity utilization, such phase transformation dynamics are poorly understood and uncontrollable. In this study, synchrotron-based operando X-ray diffraction is performed to monitor the high-current-induced phase transformation kinetics of LiNi0.6 Co0.2 Mn0.2 O2 . The sluggish Li diffusion at high Li content induces different phase transformations during charging and discharging, with strong phase separation and homogeneous phase transformation during charging and discharging, respectively. Moreover, by exploiting the dependence of Li diffusivity on the Li content and electrochemically tuning the initial Li content and distribution, phase separation pathway can be redirected to solid solution kinetics at a high charging rate of 7 C. Finite element analysis further elucidates the effect of the Li-content-dependent diffusion kinetics on the phase transformation pathway. The findings suggest a new direction for optimizing fast-cycling protocols based on the intrinsic properties of the materials.

Data on the effect of particle size, porosity and discharging rate on the performance of lithium-ion battery with NMC 622 cathode through numerical analysis.

The data presented in this article are related to the computed results reported in the article entitled "A modeling approach to study the performance of Ni-rich layered oxide cathode for lithium-ion battery" [1]. The lithium-ion battery (LIB) employed in the simulation is made up of a LiNi0.6Mn0.2Co0.2O2 (NMC 622) cathode and lithium metal foil anode. The numerical simulations were carried out using COMSOL Multiphysics 5.4 software which is based on the finite element (FE) method. The data presented in this manuscript shows how varying particle size and porosity affect the performance of the battery as the discharging rate is varied. Four different particle sizes and six different porosities were varied for the purpose of understanding the above behavior. The data presented can be used to further the analysis reported in the accompanying manuscript and aid in design of other cathode materials for LIB and other battery systems. It can also be used to compare some measured results for validation purposes. A comprehensive analysis of the data is found in [1].

Critical differences in 3D atomic structure of individual ligand-protected nanocrystals in solution.

Precise three-dimensional (3D) atomic structure determination of individual nanocrystals is a prerequisite for understanding and predicting their physical properties. Nanocrystals from the same synthesis batch display what are often presumed to be small but possibly important differences in size, lattice distortions, and defects, which can only be understood by structural characterization with high spatial 3D resolution. We solved the structures of individual colloidal platinum nanocrystals by developing atomic-resolution 3D liquid-cell electron microscopy to reveal critical intrinsic heterogeneity of ligand-protected platinum nanocrystals in solution, including structural degeneracies, lattice parameter deviations, internal defects, and strain. These differences in structure lead to substantial contributions to free energies, consequential enough that they must be considered in any discussion of fundamental nanocrystal properties or applications.

Stable and High-Power Calcium-Ion Batteries Enabled by Calcium Intercalation into Graphite.

Calcium-ion batteries (CIBs) are considered to be promising next-generation energy storage systems because of the natural abundance of calcium and the multivalent calcium ions with low redox potential close to that of lithium. However, the practical realization of high-energy and high-power CIBs is elusive owing to the lack of suitable electrodes and the sluggish diffusion of calcium ions in most intercalation hosts. Herein, it is demonstrated that calcium-ion intercalation can be remarkably fast and reversible in natural graphite, constituting the first step toward the realization of high-power calcium electrodes. It is shown that a graphite electrode exhibits an exceptionally high rate capability up to 2 A g-1 , delivering ≈75% of the specific capacity at 50 mA g-1 with full calcium intercalation in graphite corresponding to ≈97 mAh g-1 . Moreover, the capacity stably maintains over 200 cycles without notable cycle degradation. It is found that the calcium ions are intercalated into graphite galleries with a staging process. The intercalation mechanisms of the "calciated" graphite are elucidated using a suite of techniques including synchrotron in situ X-ray diffraction, nuclear magnetic resonance, and first-principles calculations. The versatile intercalation chemistry of graphite observed here is expected to spur the development of high-power CIBs.