Infrared drying of dill leaves: Drying characteristics, temperature distributions, performance analyses and colour changes.

Thin-layer drying behaviour of dill leaves samples under three different infrared radiation power intensities was investigated. Diffusion Approach was found to be the best model that describes the drying behaviour of dill leaves. Effective diffusivity values were 6.97 × 10-9, 6.84 × 10-9 and 8.96 × 10-9 m2/s for power intensities of 1790, 1970 and 2070 W/m2, respectively. According to the first and second law efficiencies, the infrared drying system was more efficient at higher power intensities (p < 0.05). However, the total colour change was maximum at the highest power intensity. For the investigated infrared drying conditions, 1970 W/m2 was recommended as the best-infrared power intensity applied for drying of dill leaves by taking into account both performance analyses and quality changes.

Characterization of viscoelastic properties of minced beef meat thawed by ohmic and conventional methods.

Frozen minced meat samples having fat contents of 2%, 10% and 18% were thawed using different methods (refrigeration thawing at ambient temperature of +4 ℃, under running cold water (+4 ℃) thawing, ohmic thawing for 10, 13 and 16 V/cm). Viscoelastic properties were determined by using rheological tests (oscillation and creep/recovery tests). Storage modulus, loss modulus, complex modulus, loss tangent, dynamic viscosity and complex viscosity values of minced meat samples increased as fat content increased. As frequency value increased, the modulus values of meat samples increased but dynamic and complex viscosity values of the samples decreased. The minced meat samples thawed by different methods had recoverable compliance values. The compliance values of meat samples during creep region can be well characterized by Burgers model. Ohmic thawing can be used as an alternative thawing method since it resulted in similar rheological properties of minced meat samples compared to refrigeration thawing at ambient temperature of +4 ℃ and under running cold water (+4℃) thawing.

Effect of voltage gradient on ohmic thawing characteristics of sour cherry juice concentrates for the temperature range of -18℃ to +4℃.

Frozen sour cherry juice concentrates having 15%, 30%, 40% and 50% total soluble solid (TSS) contents were thawed by ohmic thawing (OT; 10 V/cm, 15 V/cm and 20 V/cm) and conventional thawing (CT; at 4 ℃). To enhance the electrode-sample contact during OT, the thawing cell was custom-designed. Thawing times were shortened about 90% by OT. Thermal images were taken to determine temperature homogeneity. As OT proceeded, a small amount of frozen sample having a relatively lower density raised up to the surface of the sample. It resulted in temperature heterogeneity in the surface due to relatively rapid temperature increment in thawed regions during OT. The change of effective electrical conductivity (EEC) in the temperature range of -18 ℃ and 4 ℃ was determined and it varied between 0.005 and 0.25 s/m. For the same temperature, EEC increased as TSS increased up to 40% (p<0.05). EEC-temperature relations were characterized by a polynomial model.

Quality characteristics of pomegranate juice concentrates produced by ohmic heating assisted vacuum evaporation.

BACKGROUND: Vacuum evaporation (VE) process is widely utilized in fruit juice evaporation to preserve quality attributes of final product. However, it has some disadvantages such as possible degradation of aroma components or volatile fatty acids due to long process time, and low energy efficiency of process. Pomegranate juice having 17.5% total soluble solid (TSS) content was evaporated to 40% TSS by ohmic heating assisted vacuum evaporation (OVE; 7.5, 10 and 12.5 V cm-1 ) and VE in the present study. The effects of the evaporation methods on pH, titratable acidity and colour values, antioxidant activity (AA), total monomeric anthocyanin (TMA), total phenolic content (TPC), hydroxymethylfurfural (HMF) and invert sugar content of pomegranate juice concentrates were compared. RESULTS: The colour properties, TMA, TPC and AA values of pomegranate juice concentrates evaporated by OVE were more influenced than those evaporated by VE. The degradation of sugars was minimized for OVE processes at high voltage gradients (10 and 12.5 V cm-1 ), and HMF content of pomegranate juice concentrated by OVE was lower than VE. CONCLUSION: It is thought that electrochemical reactions occurred because of the use of titanium electrodes during the OVE process caused these quality changes in pomegranate juice concentrates having high acidity. Hence, it was concluded that the utilization of relatively more electrochemically inert electrodes should be investigated in further studies to better evaluate the of influence of OVE method on quality attributes of different fruit juices. © 2018 Society of Chemical Industry.

Influence of infrared final cooking on color, texture and cooking characteristics of ohmically pre-cooked meatball.

The objective of the current study was to improve the quality characteristics of ohmically pre-cooked beef meatballs via infrared cooking as a final stage. Samples were pre-cooked in a specially designed-continuous type ohmic cooker at a voltage gradient of 15.26 V/cm for 92 s. Infrared cooking was then applied to the pre-cooked samples at different combinations of heat fluxes (3.706, 5.678, and 8.475 kW/m(2)), application distances (10.5, 13.5, and 16.5 cm) and application durations (4, 8, and 12min). Effects of these parameters on color, texture and cooking characteristics of ohmically pre-cooked beef meatballs were investigated. The appearance of ohmically pre-cooked meatball samples was improved via infrared heating. A dark brown layer desired in cooked meatballs formed on the surface of the meatballs with lowest application distance (10.5 cm) and longest application duration (12 min). The texture of the samples was also improved with these parameters. However the cooking yield of the samples decreased at the longest application duration of infrared heating.

Influence of infrared final cooking on polycyclic aromatic hydrocarbon formation in ohmically pre-cooked beef meatballs.

Effects of infrared cooking on polycyclic aromatic hydrocarbon (PAH) formation in ohmically pre-cooked beef meatballs were investigated. Samples were pre-cooked in a specially designed-continuous type ohmic cooking at a voltage gradient of 15.26V/cm for 92s. Infrared cooking was applied as a final cooking method at different combinations of heat fluxes (3.706, 5.678, 8.475kW/m(2)), application distances (10.5, 13.5, 16.5cm) and application durations (4, 8, 12min). PAHs were analyzed by using high performance liquid chromatography (HPLC) equipped with a fluorescence detector. The total PAH levels were detected to be between 4.47 and 64µg/kg. Benzo[a] pyrene (B[a]P) and PAH4 (sum of B[a]P, chrysene (Chr), benzo[a]anthracene (B[a]A) and benzo[b]fluoranthene (B[b]F)) levels detected in meatballs were below the EC limits. Ohmic pre-cooking followed by infrared cooking may be regarded as a safe cooking procedure of meatballs from a PAH contamination point of view.

Effects of process variables on some quality properties of meatballs semi-cooked in a continuous type ohmic cooking system.

Ohmic cooking of meatballs was conducted in a continuous type ohmic cooker using different voltage gradients (15, 20 and 25 V/cm) and holding times (0, 15 and 30 s). The color and textural properties and log reductions in total microbial count of the meatballs were assessed. The effects of process variables on these responses were evaluated by linear and quadratic mathematical models. Desirability function was used to determine the optimum ohmic pre-cooking condition by considering the criteria of minimizing hardness ratio, and maximizing chewiness ratio, resilience ratio, log reduction in microbial load, outside chroma ratio, inside chroma ratio and in range of springiness, gumminess and inside L ratios. The optimum ohmic pre-cooking condition was found to be a 15.26 V/cm voltage gradient with no holding time. It is concluded that application of the optimum condition in the related ohmic system offers potential for the production of high quality and safe semi-cooked meat products.

A review of thin layer drying of foods: theory, modeling, and experimental results.

Drying is a complicated process with simultaneous heat and mass transfer, and food drying is especially very complex because of the differential structure of products. In practice, a food dryer is considerably more complex than a device that merely removes moisture, and effective models are necessary for process design, optimization, energy integration, and control. Although modeling studies in food drying are important, there is no theoretical model which neither is practical nor can it unify the calculations. Therefore the experimental studies prevent their importance in drying and thin layer drying equations are important tools in mathematical modeling of food drying. They are practical and give sufficiently good results. In this study first, the theory of drying was given briefly. Next, general modeling approaches for food drying were explained. Then, commonly used or newly developed thin layer drying equations were shown, and determination of the appropriate model was explained. Afterwards, effective moisture diffusivity and activation energy calculations were expressed. Finally, experimental studies conducted in the last 10 years were reviewed, tabulated, and discussed. It is expected that this comprehensive study will be beneficial to those involved or interested in modeling, design, optimization, and analysis of food drying.

Inactivation kinetics of Alicyclobacillus acidoterrestris spores in orange juice by ohmic heating: effects of voltage gradient and temperature on inactivation.

The effectiveness of ohmic and conventional heating for reducing spores of Alicyclobacillus acidoterrestris was investigated in commercial pasteurized orange juice. The kinetic parameters (D- and z-values) were determined during ohmic and conventional heating. The effects of temperature (70, 80, and 90 degrees C) and heating time (0, 10, 15, 20, and 30 min) on inactivation of A. acidoterrestris spores during ohmic heating in orange juice were significant (P < 0.05). For 70 degrees C, the voltage gradient also had an effect on inactivation kinetics. At 30 V/cm, D-values at 70, 80, and 90 degrees C were 58.48, 12.24, and 5.97 min, respectively. D-values at corresponding temperatures for conventionally heated spores were 83.33, 15.11, and 7.84 min, respectively. Results showed significantly higher lethality for spores treated with ohmic heating than for spores treated with conventional heating. Conventional heating was ineffective for pasteurizing orange juice, whereas the maximum ohmic heating treatment applied at 30 V/cm was sufficient to inactivate 5 log units of A. acidoterrestris spores.

Dielectrical properties of food materials--1: factors affecting and industrial uses.

The electrical properties of foods and biological products have been the most valuable factors in the novel food technology. They have been defined both from electromagnetic field concepts and from the electrical-circuit point of view. Recently, these properties are used to assess the characterization of the processes based on electrical methods: electromagnetic, electro-processes. This article is a review of dielectrical properties of food materials. It also includes factors affecting the dielectrical properties of foods and their industrial uses.

Dielectrical properties of food materials--2: measurement techniques.

The knowledge of the electrical properties of the materials to be processed or measured is important in the design of the equipment. Dielectric properties determine the behavior of the materials, when subjected to high frequency or microwave fields in dielectric heating processes or cooking. This article is a review of the measurement techniques of the dielectrical properties of food materials. This study also includes the classification of electrical properties and their importance in food processing.