ABSTRACT
A tunable single- and dual-wavelength thulium-doped all-fiber laser is demonstrated based on the implementation of an in-fiber acousto-optic tunable bandpass filter (AOTBF). The AOTBF is fabricated to be operated in the 1.9 µm region, and takes advantage of the intermodal coupling effect produced by traveling flexural acoustic waves in an optical fiber. It exhibits a 3-dB bandwidth of 2.04 nm with an insertion loss of 4.75 dB. The tuning properties of the AO device allows a continuous-wave operation with characteristics of wide tuning range (211.5 nm), narrow linewidth (50 pm) and high signal-to-noise ratio (60 dB). In the dual-wavelength regime, the laser is capable of independent tuning of each of the laser lines, achieving a tunable dual-wavelength emission that extends from 1802.67 to 1932.75 nm. A controllable wavelength spacing with minimum and maximum separations of 1.04 and 130.08 nm is obtained.
ABSTRACT
A long-cavity passively mode-locked thulium-doped all-fiber laser is reported incorporating a tapered acousto-optic tunable bandpass filter (AOTBF). The operation of the AOTBF relies on the intermodal coupling between core and cladding modes when a flexural acoustic wave propagates along an 80 µm tapered fiber. The filter works in transmission and exhibits a 3 dB bandwidth of 9.02 nm with an insertion loss of 3.4 dB. The laser supports ultrashort pulse generation at a low repetition rate of 784.93 kHz. Optical pulses with 2.43 nm of optical bandwidth and 2.1 ps pulse duration were obtained in a broad tuning range from 1824.77 to 1905.16 nm.
ABSTRACT
We investigate a new configuration of a mode-locked fiber laser by using a nonlinear polarization rotation-based design to generate soliton pulses with low repetition rate. Unlike with previously reported configurations, we introduce a Faraday mirror after the first half of the cavity length to counteract the nonlinear polarization rotation effects. The total cavity length is 437 m including a 400-m long twisted SMF-28 fiber. The fiber was twisted to cancel the linear birefringence and to ensure that the polarization ellipticity is not altered as the pulse travels along the fiber. The strict control of polarization yields a stable relation between the polarization state of the pulses propagating in the cavity and the regimes of generation. Depending on the polarization state we observed three different emission regimes, the single soliton regime (SR), conventional noise-like pulses (NLP) and noise-like square-waveform pulse (NLSWP). In the SR, a 467.2 kHz train of solitons was obtained with pulse duration of 2.9 ps at 1558.7 nm.
ABSTRACT
We report an experimental study of passive harmonic mode-locking in an all-fiber switchable dual-wavelength Er/Yb double-clad laser. The proposed scheme supports single- and dual-wavelength operation of mode-locked pulses with rectangular, h-like and trapezoidal shapes in a noise-like pulse regime. Single-wavelength emissions at λ1 = 1545.1 and λ2 = 1563.6 nm were obtained for pump power values of 9.42 and 6.31 W, achieving pulse durations of up to 18 and 11.8 ns, respectively. At an intermediary pump power of 7.5 W, dual-wavelength emission is obtained and pulses of around 3.59 ns are generated. Additionally, the transition dynamics until 4th-order harmonic mode-locking is also observed. Different laser operation regimes of fundamental and different orders of harmonic mode-locking, with rectangular, h-shaped or trapezoidal shaped pulses are obtained with the same laser configuration with simple and well-defined plates and pump power adjustments.
ABSTRACT
A switchable and tunable multi-wavelength Tm-doped fiber laser is successfully demonstrated using a filter constructed with two tapered fiber elements in the cavity. The proposed system design uses a low-cost simple filter that allows stable dual, triple, quadruple, and quintuple-wavelength emission operation in the region around 1.9 µm. In the dual wavelength regime, the laser is capable of independently tuning each wavelength. For switching and tuning, a curvature is applied to the tapered fibers.
ABSTRACT
We report the dynamics of dissipative solitons in a ring cavity passively mode-locked fiber laser with a strict control of the polarization state. We study the relation between the polarization state of the pulses propagating in the cavity and the regimes of generation. We have found that at pulse ellipticities between 5° and 15°, the laser generates one bunch of pulses in the cavity, while at higher ellipticities the laser generates multiple bunches. At constant ellipticity we rotated the polarization azimuth and observed a regime transition from the generation of noise-like pulses (NLP) to that of soliton crystal. The NLP regime was found when the azimuth was rotated towards smaller low-power transmission through the polarizer. The number of solitons in the soliton crystal also depended on the azimuth in a straightforward way: the higher the initial transmission, the bigger the number of solitons.
ABSTRACT
A compact, highly sensitive optical fiber displacement and curvature radius sensor is presented. The device consists of an adiabatic bi-conical fused fiber taper spliced to a single-mode fiber (SMF) segment with a flat face end. The bi-conical taper structure acts as a modal coupling device between core and cladding modes for the SMF segment. When the bi-conical taper is bent by an axial displacement, the symmetrical bi-conical shape of the tapered structure is stressed, causing a change in the refractive index profile which becomes asymmetric. As a result, the taper adiabaticity is lost, and interference between modes appears. As the bending increases, a small change in the fringe visibility and a wavelength shift on the periodical reflection spectrum of the in-fiber interferometer is produced. The displacement sensitivity and the spectral periodicity of the device can be adjusted by the proper selection of the SMF length. Sensitivities from around 1.93 to 3.4 nm/mm were obtained for SMF length between 7.5 and 12.5 cm. Both sensor interrogations, wavelength shift and visibility contrast, can be used to measure displacement and curvature radius magnitudes.
ABSTRACT
Nonlinear polarization dynamics of single and paired pulses in twisted fibers is experimentally and numerically studied. Accompanying a dramatic difference in the output spectrum when a single- or double-amplified soliton pulse is launched in the fiber, the output polarization for the two cases also reveals very different characteristics.
ABSTRACT
We report an original noise-like pulse dynamics observed in a figure-eight fiber laser, in which fragments are continually released from a main waveform that circulates in the cavity. Particularly, we report two representative cases of the dynamics: in the first case the released fragments drift away from the main bunch and decay over a fraction of the round-trip time, and then vanish suddenly; in the second case, the sub-packets drift without decaying over the complete cavity round-trip time, until they eventually merge again with the main waveform. The most intriguing result is that these fragments, as well as the main waveform, are formed of units with sub-ns duration and roughly the same energy.
ABSTRACT
Vector soliton propagation in circularly birefringent fibers was studied by perturbation analysis and numerically. The results show that in presence of both Raman self-frequency shift and group velocity difference between circularly polarized components the Raman cross-polarization term causes an energy transfer from the slower to the faster circular component of vector solitons. This effect leads to polarization stabilization of circularly polarized vector solitons.
ABSTRACT
We present detailed investigations of the spectral dependencies of the transmission of a fiber optical loop mirror (FOLM) consisting of a coupler with output ports spliced at arbitrary angles to a high-birefringence (Hi-Bi) fiber. The application for dual-wavelength lasers is discussed. For this aim, the spectral dependence of the reflection is tuned by the temperature of the Hi-Bi fiber that allows a fine adjustment of the cavity loss for generated wavelengths. The ratio between maximum and minimum reflection can be adjusted by the twist angle of the fiber at the splices, which also provides useful possibilities for the adjustment of cavity losses. We used the twist and temperature variation of the Hi-Bi fiber to change the operation from single wavelength to stable dual-wavelength generation with either equal or unequal powers of wavelengths.
ABSTRACT
We demonstrate the extraction of a single soliton from a bunch of solitons generated by the pulse breakup effect. The bunch of solitons was generated in a 500-m fiber pumped by 25-ps pulses. For the extraction of single soliton from the bunch we use a nonlinear optical loop mirror (NOLM). At its output we detected a pulse with full width at half-maximum (FWHM) of 0.99 ps whose autocorrelation trace corresponds to that of a soliton. Our results demonstrate that the suggested method can be useful for soliton generation, and also for investigations of the initial stage of the soliton formation process.
ABSTRACT
We propose and compare with experimental data a two-stage model of supercontinuum formation in a fiber for nanosecond-long pulse with intensities in 10 W range. As a result of the first stage, the sea of solitons is formed. The second stage is spectrum modification because of Raman interaction.
ABSTRACT
Four procedures for simultaneous high-quality amplitude jitter reduction and extinction ratio enhancement of optical data streams are presented and studied using numerical simulations. They all rely on the use of a power-balanced NOLM, optionally followed by a polarizer. The setup can be operated in various regimes, leading to several switching characteristics with different merits in the frame of the proposed application. These are discussed and compared with the results obtained using other NOLM configurations.
ABSTRACT
We examine the transmission characteristics of a NOLM device using a symmetrical coupler, highly twisted fiber, and a quarter-wave (QW) retarder plate introducing a polarization asymmetry in the loop. We demonstrate high dynamic range with controllable transmissivity, and good stability over long times. We experimentally study the transmission behavior for different input polarization states and distinguish between different polarization components of the output beam. Experiments are in good agreement with our theoretical approach previously published. Appropriate choice of the input and output polarizations allows a very high dynamic range. The adjustment of the QW retarder and input polarization enables tuning the critical power over a wide range.
ABSTRACT
The operation of an unconventional, power-symmetric nonlinear optical loop mirror (NOLM) is investigated. Its principle is based on the creation of a polarization asymmetry between the counterpropagating beams, through the use of a quarter-wave plate and highly twisted fiber in the loop. Using a very intuitive approach, we propose a simple although comprehensive description of the NOLM operation. By adjusting the angle of the quarter-wave plate, the interferometer can be tuned continuously from non-power-dependent operation to nonlinear switching, in a very convenient way. Experimental results confirm theoretical predictions. The properties of the proposed NOLM design make it very attractive for various applications, like pedestal suppression and amplitude regularization of optical pulse trains.
ABSTRACT
We describe a new experimental method of determining low birefringence in fibers, based on adjusting the fiber twist in a fiber-optic loop mirror. The method allows simple birefringence measurement in fibers with beat length within the range 0.05-100 m.
ABSTRACT
We describe a new fiber laser configuration based on a nonlinear optical loop mirror with a symmetrical coupler, a quarter-wave retarder, and highly twisted, birefringent fiber in the loop. The nonlinear optical loop mirror configuration operates by nonlinear polarization rotation. We have achieved stable generation of subpicosecond pulses with milliwatts of average output power.