Synthesis of organic solvent-free nitrogen-doped carbon quantum dots as unique green fluorimetric probes for analysis of abrocitinib in human plasma.

Atopic dermatitis (AD) is a persistent, inflammatory skin condition that impacts approximately 15 to 20% of children and 1 to 3% of adults globally. Common skin manifestations include papules, papulovesicular, and brown or red patches with swelling, crusting, and flaking. Therefore, the drug abrocitinib (ABR) was approved by the US FDA as an oral treatment for atopic dermatitis. The present study outlines the development of innovative, thermostable, and pH-stable organic solvent-free nitrogen-doped carbon dots (N@CQDs) synthesized through a one-step method for evaluating ABR with a notable quantum yield of 33.84% to minimize the use of organic solvents. Their cost-effectiveness, eco-friendly characteristics, and outstanding photocatalytic properties have established them as a promising alternative to conventional luminescent techniques like fluorescent dyes and luminous derivatization technique. The reaction of ABR with N@CQDs led to a significant decrease in the luminescent response of the produced green and stable carbon quantum dots at 513 nm. The detection range was determined to be 1.0-150.0 ng mL-1, with a lower limit of quantitation (LOQ) equal to 0.52 ng mL-1 based on the linear graph. The green method effectively used for analysis of ABR in pharmaceutical tablets and pharmacokinetic study with high sensitivity.

Verapamil-Loaded Cubosomes for Enhancing Intranasal Drug Delivery: Development, Characterization, Ex Vivo Permeation, and Brain Biodistribution Studies.

Verapamil hydrochloride (VRP), an antihypertensive calcium channel blocker drug has limited bioavailability and short half-life when taken orally. The present study was aimed at developing cubosomes containing VRP for enhancing its bioavailability and targeting to brain for cluster headache (CH) treatment as an off-label use. Factorial design was conducted to analyze the impact of different components on entrapment efficiency (EE%), particle size (PS), zeta potential (ZP), and percent drug release. Various in-vitro characterizations were performed followed by pharmacokinetic and brain targeting studies. The results revealed the significant impact of glyceryl monooleate (GMO) on increasing EE%, PS, and ZP of cubosomes with a negative influence on VRP release. The remarkable effect of Poloxamer 407 (P407) on decreasing EE%, PS, and ZP of cubosomes was observed besides its influence on accelerating VRP release%. The DSC thermograms indicated the successful entrapment of the amorphous state of VRP inside the cubosomes. The design suggested an optimized formulation containing GMO (50% w/w) and P407 (5.5% w/w). Such formulation showed a significant increase in drug permeation through nasal mucosa with high Er value (2.26) when compared to VRP solution. Also, the histopathological study revealed the safety of the utilized components used in the cubosomes preparation. There was a significant enhancement in the VRP bioavailability when loaded in cubosomes owing to its sustained release favored by its direct transport to brain. The I.N optimized formulation had greater BTE% and DTP% at 183.53% and 90.19%, respectively in comparison of 41.80% and 59% for the I.N VRP solution.

Tracking the Variations in Trace and Heavy Elements in Smoking Products Marketed in Oman and Egypt: Risk Assessment After Implementation of Constraining Protocols.

Tobacco smoking is becoming one of the major worldwide concerns regarding environmental pollution as well as health threats. In 2005, the World Health Organization (WHO) released the Framework Convention On Tobacco Control (FCTC), which outlined protocols for controlling tobacco products. Oman was one of the leading countries to follow these protocols; however, Egypt has only followed these protocols recently in 2020. One of the main challenges in tobacco product control is the variation in their trace element's types and amounts from country to country owing to differences in agriculture techniques and used chemical additives. Smoking releases different toxic metal ions found in them into the air, and hence, analyzing trace amounts of metals in tobacco smoking products is becoming more critical. The proposed research aims to evaluate the current levels of 11 heavy metals (namely, As, Pb, Cd, Co, Cr, Be, Ba, Mn, Ni, Fe, and Hg) in 22 tobacco products available in Egypt and Oman using inductively coupled plasma optical emission spectroscopy and a direct mercury analyzer. Although some elements such as Be, Co, and Cd were absent, the positive detection of As and Pb and the levels of Ba, Cr, and Ni are still alarming, especially for heavy smokers. The obtained results were then statistically related to previously published data in 2017 to explore the effectiveness of implementing the FCTC protocols within the Egyptian market. The outcomes suggested a positive impact of FCTC protocol implementation in Egypt, besides the lower levels of elemental content for Omani products compared to the Egyptian market.

A new green fluorimetric micelle complexation approach for reduction of the consumed solvent and quantification of avapritinib in biological fluids.

Avapritinib (AVA) is the first medication authorized by the US-FDA in 2020 for the management of gastrointestinal stromal tumours (GISTs) that can't be treated by surgery. Cancer is among the most common causes of death worldwide and is the second most common cause of death after cardiovascular disease. Therefore, a quick, easy, sensitive, and straightforward fluorimetric approach was used to analyse AVA in pharmaceutical materials and blood plasma (pharmacokinetic). The suggested technique relies on 2% sodium dodecyl sulphate (SDS, pH 4) micellar system augmentation of the fluorescence of the tested drug. The technique demonstrated high relative fluorescence intensity (RFI) at 430 nm after excitation at 340 nm. Concentrations ranging from 20.0-400.0 ng mL-1 with a limit of quantitation of 9.47 ng mL-1 were used to obtain luminescence data for the studied medicine. In addition, the quantum yield of the AVA fluorescence was increased with the gradual addition of a surfactant at a concentration above its critical micellar level. This knowledge has been exploited to enhance the effectiveness of a spectrofluorometric technique for the estimation of AVA in human plasma (98.95 ± 1.22%) and uniformity tests with greenness assessments. The conditions for enhanced fluorescence were optimized and fully validated using US-FDA and International Conference on Harmonization (ICH) rules. This innovative strategy was expanded for AVA stability research in human plasma across various circumstances. This approach is an eco-friendly solution compared to traditional testing methods that use hazardous chemicals.

Application of 32 factorial design for loratadine-loaded nanosponge in topical gel formulation: comprehensive in-vitro and ex vivo evaluations.

Loratadine (LoR) is a highly lipophilic and practically insoluble in water, hence having a low oral bioavailability. As it is formulated as topical gel, it competitively binds with the receptors, thus reducing the side-effects. The objective of this study was to prepare LoR loaded nanosponge (LoR-NS) in gel for topical delivery. Nine different formulations of emulsion were prepared by solvent evaporation method with polyvinyl alcohol (PVA), ethyl cellulose (EC), and dichloromethane (DCM). Based on 32 Full Factorial Design (FFD), optimization was carried out by varying the concentration of LOR:EC ratio and stirring rate. The preparations were subjected for the evaluation of particle size (PS), in vitro release, zeta potential (ZP) and entrapment efficiency (EE). The results revealed that the NS dispersion was nanosized with sustained release profiles and significant PS. The optimised formulation was formulated and incorporated into carbopol 934P hydrogel. The formulation was then examined to surface morphological characterizations using scanning electron microscopy (SEM) which depicted spherical NS. Stability studies, undertaken for 2 months at 40 ± 2 °C/75 ± 5% RH, concluded to the stability of the formulation. The formulation did not cause skin irritation. Therefore, the prepared NS hydrogel proved to be a promising applicant for LoR as a novel drug delivery system (NDDS) for safe, sustained and controlled topical application.

Design, Characterization, and Bioanalytical Applications of Green Terbium- and Nitrogen-Doped Carbon Quantum Dots as a Fluorescent Nanoprobe for Omadacycline Analysis.

Terbium- and nitrogen-doped carbon quantum dots (Tb,N@CQDs) were greenly created employing microwave synthesis from plum juice with terbium nitrate. The synthesis of Tb,N@CQDs was fast (7 min) with a high quantum yield (35.44%). Tb,N@CQDs were fully characterized using transmission electron microscopy, Zeta potential analysis, fluorescence, and ultraviolet spectroscopy. Omadacycline (OMC) is a broad-spectrum tetracycline that has been recently approved by the United States Food and Drug Act (FDA) in October 2018. OMC is the first oral aminomethylcycline class antibiotic drug that was authorized for the treatment of acute skin structure infections and community-acquired pneumonia. Tb,N@CQDs exhibited emission at 440 nm after excitation at 360 nm, where their fluorescence intensity showed a reduction upon addition of OMC. The experimental parameters were further studied and optimized. The linear range was between 40 and 60 parts per billion (ppb), with (limit of quantitation) equal to 34.78 ppb. The proposed approach was validated for bioanalytical purposes using FDA guidelines and proved to be straightforward, cheap, highly sensitive, and very selective, which can be used in clinical studies. The developed approach proved to be green using some current assessment metrics and was applied successfully for the determination of OMC in human plasma, milk, and pharmaceutical formulations as well as pharmacokinetic study.

SUMO protease SENP6 protects the nucleus from hyperSUMOylation-induced laminopathy-like alterations.

The small ubiquitin-like modifier (SUMO) protease SENP6 disassembles SUMO chains from cellular substrate proteins. We use a proteomic method to identify putative SENP6 substrates based on increased apparent molecular weight after SENP6 depletion. Proteins of the lamin family of intermediate filaments show substantially increased SUMO modification after SENP6 depletion. This is accompanied by nuclear structural changes remarkably like those associated with laminopathies. Two SUMO attachment sites on lamin A/C are close to sites of mutations in Emery-Driefuss and limb girdle muscular dystrophy. To establish a direct link between lamin SUMOylation and the observed phenotype, we developed proximity-induced SUMO modification (PISM), which fuses a lamin A/C targeting DARPin to a SUMO E3 ligase domain. This directly targets lamin A/C for SUMO conjugation and demonstrates that enhanced lamin SUMO modification recapitulates the altered nuclear structure manifest after SENP6 depletion. This shows SENP6 activity protects the nucleus against hyperSUMOylation-induced laminopathy-like alterations.

The Expression of Stem Cell Marker LGR5 and Its Coexpression with Β-Catenin in Sporadic Colorectal Carcinoma and Adenoma: A Comparative Immunohistochemical Study.

Background: LGR5 is one of the most important stem cell markers for colorectal cancer (CRC), as it potentiates Wnt/Β-catenin signaling. The well-characterized deregulation of Wnt/Β-catenin signaling that occurs during adenoma/carcinoma sequence in CRC renders LGR5 a hopeful therapeutic target. We assessed the immunohistochemical expression of LGR5 and Β-catenin in normal colonic and tumorous lesions with a clinicopathological correlation. Methods: Tissue blocks and clinical data of 50 selected cases were included: 8 from normal mucosa, 12 cases of adenoma, and 30 cases of CRC, where sections were cut and re-examined and the immunohistochemical technique was conducted using anti-LGR5 and anti-Β-catenin to measure the staining density. Results: There was no expression of LGR5 in normal mucosa compared to samples of adenoma and CRC samples. The association analysis showed that CRC specimens were more likely to have strong LGR5 and Β-catenin expressions than the other two groups (p = 0.048 and p < 0.001, respectively). Specimens with high-grade dysplastic adenoma were more likely to express moderate-to-strong expression of LGR5 and Β-catenin (p = 0.013 and p = 0.036, respectively). In contrast, there were no statistically significant associations between LGR5 and Β-catenin expression with grade and stage. Conclusion: These results suggest and support the possible role of LGR5 as a potential marker of cancer stem cells in sporadic colorectal carcinogenesis in addition to a prognostic value for LGR5 and Β-catenin in adenomatous lesions according to immunohistochemical expression density. A potential therapeutic role of LGR5 in CRC is suggested for future studies based on its role in pathogenesis.

Fast and Sensitive Bioanalytical Method for the Determination of Deucravacitinib in Human Plasma Using HPLC-MS/MS: Application and Greenness Evaluation.

Plaque psoriasis is a common, long-lasting illness that affects the immune system and causes significant negative impacts on a patient's physical health, well-being, and ability to work effectively. Deucravacitinib (DEU) is the first oral medication used in the treatment of plaque psoriasis, a chronic skin condition that causes red, scaly patches on the skin. DEU is a type of medication called an oral Janus kinase (JAK) inhibitor, which works by blocking specific enzymes that play a role in the inflammation and immune response associated with psoriasis. Therefore, a quick, easy, novel, reliable, sensitive, and straightforward liquid chromatography-tandem mass spectrometry (LC-MS/MS) approach was used to analyze DEU in plasma samples. The LC-MS/MS method for the determination of DEU in human plasma was based on using trimethoprim as an internal standard (IS). The separation of DEU and IS was carried out via liquid-liquid extraction (LLE). The extract was then subjected to the chromatographic system separation using the ACE-C18 column (4.6 × 100 mm, 5 µm). The mobile phase employed consisted of methanol and a solution of 2 mM ammonium formate (80:20 v/v, respectively). The flow rate used was set at 0.9 mL min-1. The creative strategy was performed by running an ABSCIEX API 4000 mass spectrometer with an electron spray ionization source in multiple reaction monitoring (MRM) mode. The ion transitions m/z 426.3 → 358.2 were used for DEU quantitation, while the ion transitions m/z 291.1 → 261.1 were used for trimethoprim quantitation. The accuracy, precision, linearity, recovery, and selectivity of DEU were deemed acceptable when validated for a concentration range between 0.500 and 601.050 ng/mL, utilizing a weighting factor of 1/x2.

Development of cysteine-doped MnO2 quantum dots for spectrofluorimetric estimation of copper: applications in different matrices.

Copper (Cu) plays a role in maintaining healthy nerve cells and the immune system. Osteoporosis is a high-risk factor for Cu deficiency. In the proposed research, unique green, fluorescent cysteine-doped MnO2 quantum dots (Cys@MnO2 QDs) were synthesized and assessed for the determination of Cu in different food and hair samples. The developed quantum dots were synthesized with the help of cysteine using a straightforward ultrasonic approach to create 3D fluorescent Cys@MnO2 QDs. The resulting QDs' morphological and optical characteristics were carefully characterized. By adding Cu ions, the intensity of fluorescence for the produced Cys@MnO2 QDs was found to be dramatically reduced. Additionally, the applicability of Cys@MnO2 QDs as a new luminous nanoprobe was found to be strengthened by the quenching effect grounded on the Cu-S bonding. The concentrations of Cu2+ ions were estimated within the range of 0.06 to 7.00 µg mL-1, with limit of quantitation equal to 33.33 ng mL-1 and detection limit equal to 10.97 ng mL-1. The Cys@MnO2 QD technique was applied successfully for the quantification of Cu in a variety of foods, including chicken meat, turkey, and tinned fish, as well as in human hair samples. The chance that this novel technique could be a useful tool for figuring out the amount of cysteine in bio-samples is increased by the sensing system's remarkable advantages, which include being rapid, simple, and economical.

Recent advances in chiral selectors immobilization and chiral mobile phase additives in liquid chromatographic enantio-separations: A review.

For decades now, the separation of chiral enantiomers of drugs has been gaining the interest and attention of researchers. In 1991, the first guidelines for development of chiral drugs were firstly released by the US-FDA. Since then, the development in chromatographic enantioseparation tools has been fast and variable, aiming at creating a suitable environment where the physically and chemically identical enantiomers can be separated. Among those tools, the immobilization of chiral selectors (CS) on different stationary phases and the chiral mobile phase additives (CMPA) which have been progressed and studied extensively. This review article highlights the major advances in immobilization of CS together with their different recognition mechanisms as well as CMPA as a cheaper and successful alternative for chiral stationary phases. Moreover, the role of molecular modeling tool as a pre-step in the choice of CS for evaluating possible interactions with different ligands has been pointed up. Illustrations of reported methods and updates for immobilized CS and CMPA have been included.

Zinc(II) complexation strategy for ultra-sensitive fluorimetric estimation of molnupiravir: Applications and greenness evaluation.

The endemicity of the pandemic coronavirus disease 2019 (COVID-19) infection proved to be transitional only. Spikes are forming again in 2023, and high expectations are returning for reinfections and viral mutations. Molnupiravir (MOL) has been approved as an oral antiviral drug for the treatment of the COVID-19 causative virion. Therefore, the development of an ultrasensitive, instantaneous, and cost-effective method for the quantification of MOL in real plasma samples and formulated dosage form are mandatory. The proposed approach is based on the synthesis of a MOL metal-chelation product. MOL as a ligand was chelated with 1.0 mM zinc(II) in an acetate buffer (pH 5.3). After illumination at 340 nm, the intensity of the MOL fluorescence measured at 386 nm was increased by about 10-fold. The linearity range was found to be from 60.0 to 800.0 ng mL-1 with limit of quantitation (LOQ) of 28.6 ng mL-1 . Two methods were utilized for measuring the greenness of the proposed method (Green Analytical Procedure Index [GAPI] and analytical greenness metric [AGREE] methods), with results equal to 0.8. The binding stoichiometry of MOL with the zinc(II) ion was found to be 2:1. All the experimental parameters were optimized and validated using International Conference on Harmonization (ICH) and United States Food and Drug Administration (US-FDA) recommendations. Furthermore, the fluorescent probes were successfully utilized in real human plasma with high percentages of recovery (95.6%-97.1%) without any matrix interferences. The mechanism of fluorescent complex formation was confirmed using 1 H NMR in the presence and absence of Zn(II). The method was further utilized for testing content uniformity of MOL in its marketed capsule dosage forms.

Studying molecular interactions via capillary electrophoresis and microscale thermophoresis: A review.

The process of choosing the most proper technique for studying the molecular interactions is based on critical factors such as instrumentation complexity, automation, experimental procedures, analysis time, consumables, and cost-value. This review has tracked the use of affinity capillary electrophoresis (ACE) and microscale thermophoresis (MST) techniques in the evaluation of molecular binding among different molecules during the 5 years 2016-2021. ACE has proved to be an attractive technique for biomolecular characterization with high resolution efficiency where small variations in several controlling factors can much improve such efficiency compared to other analytical techniques. Meanwhile, MST has proved its higher sensitivity for smaller amounts of complex non-purified biosamples without affecting its robustness while providing high through output. However, the main motivation to review both techniques in the proposed review was their capability to carry out all experiments without the need for immobilizing one interacting partner, besides a great flexibility in the use of buffering systems. The proposed review demonstrates the importance of both techniques in different areas of life sciences. Moreover, the recent advances in exploiting ACE and MST in other research interests have been discussed.

Green Chemometric Determination of Cefotaxime Sodium in the Presence of Its Degradation Impurities Using Different Multivariate Data Processing Tools; GAPI and AGREE Greenness Evaluation.

Four eco-friendly, cost-effective, and fast stability-indicating UV-VIS spectrophotometric methods were validated for cefotaxime sodium (CFX) determination either in the presence of its acidic or alkaline degradation products. The applied methods used multivariate chemometry, namely, classical least square (CLS), principal component regression (PCR), partial least square (PLS), and genetic algorithm-partial least square (GA-PLS), to resolve the analytes' spectral overlap. The spectral zone for the studied mixtures was within the range from 220 to 320 nm at a 1 nm interval. The selected region showed severe overlap in the UV spectra of cefotaxime sodium and its acidic or alkaline degradation products. Seventeen mixtures were used for the models' construction, and eight were used as an external validation set. For the PLS and GA-PLS models, a number of latent factors were determined as a pre-step before the models' construction and found to be three for the (CFX/acidic degradants) mixture and two for the (CFX/alkaline degradants) mixture. For GA-PLS, spectral points were minimized to around 45% of the PLS models. The root mean square errors of prediction were found to be (0.19, 0.29, 0.47, and 0.20) for the (CFX/acidic degradants) mixture and (0.21, 0.21, 0.21, and 0.22) for the (CFX/alkaline degradants) mixture for CLS, PCR, PLS, and GA-PLS, respectively, indicating the excellent accuracy and precision of the developed models. The linear concentration range was studied within 12-20 µg mL-1 for CFX in both mixtures. The validity of the developed models was also judged using other different calculated tools such as root mean square error of cross validation, percentage recoveries, standard deviations, and correlation coefficients, which indicated excellent results. The developed methods were also applied to the determination of cefotaxime sodium in marketed vials, with satisfactory results. The results were statistically compared to the reported method, revealing no significant differences. Furthermore, the greenness profiles of the proposed methods were assessed using the GAPI and AGREE metrics.

Toxic Elemental Impurities in Herbal Weight Loss Supplements; A Study Using ICP-OES Microwave-Assisted Digestion.

The tendency of using weight loss herbal preparations is continuously increasing, especially for the widespread consumption of junk food that is characterized by high calories. Weight loss herbal preparations are considered a type of food supplement product, and, as such, the regulations governing their quality control might be minimal. These products could be locally formulated in any country or internationally imported. Being non-controlled products, the herbal weight-loss products may contain high levels of elemental impurities that might exceed the permissible ranges. Moreover, these products contribute to the total daily intake (TDI) of such elements, which might represent concerns about their potential toxicological danger. In this research, the elemental contents in such products were investigated. The inductively coupled plasma with optical emission spectrometer (ICP-OES) was used to determine the levels of 15 elemental contents, namely, Na, K, Ca, Mg, Al, Cu, Fe, Li, Mn, As, Co, Cr, Cd, Ni and Pb. The results showed that seven micro-elements, namely Cd, Co, Ni, Cr, Pb, Li and Cu, were either not detectable or at a concentration much lower than their tolerable limits. However, all studied macro-elements (Na, K, Ca and Mg), together with Fe, were found at considerable, yet safe levels. On the other hand, Mn, Al and As contents showed perturbing levels in some of the studied products. Finally, a conclusion was highlighted for the necessity for stricter surveillance of such herbal products.

An Innovative Polymer-Based Electrochemical Sensor Encrusted with Tb Nanoparticles for the Detection of Favipiravir: A Potential Antiviral Drug for the Treatment of COVID-19.

An innovative polymer-based electro-sensor decorated with Tb nanoparticles has been developed for the first time. The fabricated sensor was utilized for trace determination of favipiravir (FAV), a recently US FDA-approved antiviral drug for the treatment of COVID-19. Different techniques, including ultraviolet-visible spectrophotometry (UV-VIS), cyclic voltammetry (CV), scanning electron microscope (SEM), X-ray Diffraction (XRD) and electrochemical impedance spectroscopy (EIS), were applied for the characterization of the developed electrode TbNPs@ poly m-THB/PGE. Various experimental variables, including pH, potential range, polymer concentration, number of cycles, scan rate and deposition time, were optimized. Moreover, different voltammetric parameters were examined and optimized. The presented SWV method showed linearity over the range of 10-150 × 10-9 M with a good correlation coefficient (R = 0.9994), and the detection limit (LOD) reached 3.1 × 10-9 M. The proposed method was applied for the quantification of FAV in tablet dosage forms and in human plasma without any interference from complex matrices, obtaining good % recovery results (98.58-101.93%).

Comparative Evaluation of Reversed Stationary Phase Geometries and Greener Systems on HPLC and UHPLC Using Five Recent Hepatitis-C Antivirals.

BACKGROUND: Being the most widely used LC mode, reversed-phase (RP)-HPLC accounts for the highest percentage of HPLC separations. The main aim of the green analytical chromatographer is to enhance the efficiency of separations in short analysis times, using the ecologically safest materials and lowest energy consumption. OBJECTIVE: Being the heart of any chromatography where the actual separations take place, LC columns have diverse varieties which include different stationary phase geometries as well as different particles sizes. The rationale for column choice is quite complicated. Totally porous, core-shell particles, and monolithic rods are stationary phase types manufactured in RP-mode. The main objective of this research study is to aid in the selection of HPLC or ultra-high performance lquid chromatography (UHPLC) instrumentation. METHODS: In this research article, three different column packing phases were evaluated and compared by both HPLC and UHPLC techniques. The purpose was to explore the best rational choice of column packing as well as LC instrumentation, when using greener chromatographic conditions. RESULTS: The study showed core-shell particles were superior in both HPLC and UHPLC techniques. CONCLUSION: Core-shell particles enabled the utilization of greener mobile phase compositions. Monolithic columns showed better tolerance of greener mobile phase flow rates, without considerable loss of performance. HIGHLIGHTS: The use of greener organic solvents was assessed on different stationary phase geometries. The separation efficiency for five recent antiviral drugs was evaluated, in order to give better understanding of the way for column choice according to the underlying experimental conditions. UHPLC and HPLC were compared comprehensively for applicability and cost-effectiveness.

Variation in the ovine FOXP3 gene and its effect on growth traits in Egyptian Barki sheep.

The aim of the present study was to detect the FOXP3 gene polymorphisms in Barki sheep at a variable region covering exon 13, intron 13 and the coding sequence in exon 14 and to test the association of these polymorphisms with growth traits. 122 Barki lambs were phenotyped for various growth traits, viz., birth weight (BW), weaning weight (WW), pre-weaning daily gain in weight (ADG1), post-weaning daily gain in weight (ADG2) and marketing bodyweight (MW). The polymerase chain reaction - single-strand conformational polymorphisms (PCR-SSCP) and DNA sequencing methods were used to identify the genetic variants in the FOXP3 gene. The associations between the variation in FOXP3 gene and growth traits were tested using a general linear model. Two variants (F1 and F2 with gene frequencies of 0.64 and 0.36, respectively), and three genotypes (F1F1, F1F2 and F2F2 with frequencies of 0.37, 0.53 and 0.10, respectively) were detected. The association of FOXP3 genotype was significant (p < 0.05) with ADG2 and MW. It is concluded that FOXP3 genotype might be helpful for sheep breeders to produce fast-growing lambs. However, further studies are needed in a large population to confirm the association we found.

Antitrypanosomal, Antitopoisomerase-I, and Cytotoxic Biological Evaluation of Some African Plants Belonging to Crassulaceae; Chemical Profiling of Extract Using UHPLC/QTOF-MS/MS.

In our continuous study for some African plants as a source for antitrypanosomally and cytotoxic active drugs, nine different plants belonging to the Crassulaceae family have been selected for the present study. Sedum sieboldii leaves extract showed an antitrypanosomal activity against Trypanosoma brucei with an IC50 value of 8.5 µg/mL. In addition, they have cytotoxic activities against (HCT-116), (HEPG-2) and (MCF-7), with IC50 values of 28.18 ± 0.24, 22.05 ± 0.66, and 26.47 ± 0.85 µg/mL, respectively. Furthermore, the extract displayed inhibition against Topoisomerase-1 with an IC50 value of 1.31 µg/mL. It showed the highest phenolics and flavonoids content among the other plants' extracts. In order to identify the secondary metabolites which may be responsible for such activities, profiling of the polar secondary metabolites of S. sieboldii extract via Ultra-Performance Liquid Chromatography coupled to High-Resolution QTOF-MS operated in negative and positive ionization modes, which revealed the presence of 46 metabolites, including flavonoids, phenolic acids, anthocyanidins, coumarin, and other metabolites.