Primordial aqueous alteration recorded in water-soluble organic molecules from the carbonaceous asteroid (162173) Ryugu.

We report primordial aqueous alteration signatures in water-soluble organic molecules from the carbonaceous asteroid (162173) Ryugu by the Hayabusa2 spacecraft of JAXA. Newly identified low-molecular-weight hydroxy acids (HO-R-COOH) and dicarboxylic acids (HOOC-R-COOH), such as glycolic acid, lactic acid, glyceric acid, oxalic acid, and succinic acid, are predominant in samples from the two touchdown locations at Ryugu. The quantitative and qualitative profiles for the hydrophilic molecules between the two sampling locations shows similar trends within the order of ppb (parts per billion) to ppm (parts per million). A wide variety of structural isomers, including α- and ß-hydroxy acids, are observed among the hydrophilic molecules. We also identify pyruvic acid and dihydroxy and tricarboxylic acids, which are biochemically important intermediates relevant to molecular evolution, such as the primordial TCA (tricarboxylic acid) cycle. Here, we find evidence that the asteroid Ryugu samples underwent substantial aqueous alteration, as revealed by the presence of malonic acid during keto-enol tautomerism in the dicarboxylic acid profile. The comprehensive data suggest the presence of a series for water-soluble organic molecules in the regolith of Ryugu and evidence of signatures in coevolutionary aqueous alteration between water and organics in this carbonaceous asteroid.

Programmable Computational RNA Droplets Assembled via Kissing-Loop Interaction.

DNA droplets, artificial liquid-like condensates of well-engineered DNA sequences, allow the critical aspects of phase-separated biological condensates to be harnessed programmably, such as molecular sensing and phase-state regulation. In contrast, their RNA-based counterparts remain less explored despite more diverse molecular structures and functions ranging from DNA-like to protein-like features. Here, we design and demonstrate computational RNA droplets capable of two-input AND logic operations. We use a multibranched RNA nanostructure as a building block comprising multiple single-stranded RNAs. Its branches engaged in RNA-specific kissing-loop (KL) interaction enables the self-assembly into a network-like microstructure. Upon two inputs of target miRNAs, the nanostructure is programmed to break up into lower-valency structures that are interconnected in a chain-like manner. We optimize KL sequences adapted from viral sequences by numerically and experimentally studying the base-wise adjustability of the interaction strength. Only upon receiving cognate microRNAs, RNA droplets selectively show a drastic phase-state change from liquid to dispersed states due to dismantling of the network-like microstructure. This demonstration strongly suggests that the multistranded motif design offers a flexible means to bottom-up programming of condensate phase behavior. Unlike submicroscopic RNA-based logic operators, the macroscopic phase change provides a naked-eye-distinguishable readout of molecular sensing. Our computational RNA droplets can be applied to in situ programmable assembly of computational biomolecular devices and artificial cells from transcriptionally derived RNA within biological/artificial cells.

Autonomous assembly and disassembly of gliding molecular robots regulated by a DNA-based molecular controller.

In recent years, there has been a growing interest in engineering dynamic and autonomous systems with robotic functionalities using biomolecules. Specifically, the ability of molecular motors to convert chemical energy to mechanical forces and the programmability of DNA are regarded as promising components for these systems. However, current systems rely on the manual addition of external stimuli, limiting the potential for autonomous molecular systems. Here, we show that DNA-based cascade reactions can act as a molecular controller that drives the autonomous assembly and disassembly of DNA-functionalized microtubules propelled by kinesins. The DNA controller is designed to produce two different DNA strands that program the interaction between the microtubules. The gliding microtubules integrated with the controller autonomously assemble to bundle-like structures and disassemble into discrete filaments without external stimuli, which is observable by fluorescence microscopy. We believe this approach to be a starting point toward more autonomous behavior of motor protein-based multicomponent systems with robotic functionalities.

Region-based analysis of sensory processing using diffusion tensor imaging.

The caudate nucleus has been thought to be involved in the control of motor commands by the cerebrum, and recent studies suggest that it may play a role in the control of attachment behavior, cognition, emotion, and mental functions. Implied by the basal ganglia's involvement in the execution, planning and control of movement, the caudate nucleus functions in a situation-dependent manner where processing of external stimuli is important on the basis of learning and memory. Sensory processing, which determines the response to external stimuli, has been shown to be related to various brain regions but it remains unknown how sensory processing is associated with the structure of the caudate nucleus and white matter microstructures of the caudate. Using four diffusion parameters derived from diffusion tensor imaging (DTI) (i.e., fractional anisotropy (FA), mean diffusivity (MD), axonal diffusivity (AD), and radial diffusivity (RD)) and the Adolescent/Adult Sensory Profile (AASP) questionnaire of 99 healthy subjects [42 males and 57 females; mean age:26.9 years, standard deviation 6.9], we investigated the relationship between white matter structure in the caudate nucleus and sensory processing. In consistent with what had been suggested by the results of previous studies, we found significant correlations between AD, MD and tactile sensation. Furthermore, we found a significant correlation between AD, MD and tactile sensory avoidance, the AASP sub-scores regarding the tactile senses. To the best of our knowledge, this is the first study to show that DTI diffusion parameters correlate with AASP scores in specific brain regions.

Scalable Synthesis of Planar Macroscopic Lipid-Based Multi-Compartment Structures.

As life evolved, the path from simple single cell organisms to multicellular enabled increasingly complex functionalities. The spatial separation of reactions at the micron scale achieved by cellular structures allowed diverse and scalable implementation in biomolecular systems. Mimicking such spatially separated domains in a scalable approach could open a route to creating synthetic cell-like structured systems. Here, we report a facile and scalable method to create multicellular-like, multi-compartment (MC) structures. Aqueous droplet-based compartments ranging from 50 to 400 µm were stabilized and connected together by hydrophobic layers composed of phospholipids and an emulsifier. Planar centimeter-scale MC structures were formed by droplet deposition on a water interface. Further, the resulting macroscopic shapes were shown to be achieved by spatially controlled deposition. To demonstrate configurability and potential versatility, MC assemblies of both homogeneous and mixed compartment types were shown. Notably, magnetically heterogeneous systems were achieved by the inclusion of magnetic nanoparticles in defined sections. Such structures demonstrated actuated motion with structurally imparted directionality. These novel and functionalized structures exemplify a route toward future applications including compartmentally assembled "multicellular" molecular robots.

Surfactant-Assisted Purification of Hydrophobic DNA Nanostructures.

Purification of functional DNA nanostructures is an essential step in achieving intended functions because misfolded structures and the remaining free DNA strands in a solution can interact and affect their behavior. However, due to hydrophobicity-mediated aggregation, it is difficult to purify DNA nanostructures modified with hydrophobic molecules by conventional methods. Herein, we report the purification of cholesterol-modified DNA nanostructures by using a novel surfactant-assisted gel extraction. The addition of sodium cholate (SC) to the sample solution before structure folding prevented aggregation; this was confirmed by gel electrophoresis. We also found that adding sodium dodecyl sulfate (SDS) to the sample inhibited structural folding. The cholesterol-modified DNA nanostructures prepared with SC were successfully purified by gel extraction, and their ability to bind to the lipid membrane surfaces was maintained. This method will facilitate the purification of DNA nanostructures modified with hydrophobic molecules and expand their applicability in the construction of artificial cell-like systems.

Guided internet-based cognitive behavioral therapy for obsessive-compulsive disorder: A multicenter randomized controlled trial in Japan.

Few studies have compared the effectiveness of internet-based cognitive behavior therapy (ICBT) for obsessive-compulsive disorder (OCD) with treatment as usual (TAU). We investigated the effectiveness of guided ICBT for patients with OCD. This prospective, randomized, controlled, assessor-blinded, multicenter clinical trial was conducted at three facilities in Japan from January 2020 to March 2021. Thirty-one patients with OCD as the primary diagnosis participated in the trial and were randomly assigned to either the intervention group or the control group. The primary outcome was the Yale-Brown obsessive-compulsive scale score; the assessors were blinded. Results of the analysis of covariance among the groups were significantly different between the groups (p < 0.01, effect size Cohen's d = 1.05), indicating the superiority of guided ICBT. The results suggest that guided ICBT is more effective than TAU for treating OCD. RCT REGISTRATION: UMIN Clinical Trials Registry (UMIN000039375).

The effects of epigenetic age and its acceleration on surface area, cortical thickness, and volume in young adults.

DNA methylation age has been used in recent studies as an epigenetic marker of accelerated cellular aging, whose contribution to the brain structural changes was lately acknowledged. We aimed to characterize the association of epigenetic age (i.e. estimated DNA methylation age) and its acceleration with surface area, cortical thickness, and volume in healthy young adults. Using the multi-tissue method (Horvath S. DNA methylation age of human tissues and cell types. 2013. Genome Biol 14), epigenetic age was computed with saliva sample. Epigenetic age acceleration was derived from residuals after adjusting epigenetic age for chronological age. Multiple regression models were computed for 148 brain regions for surface area, cortical thickness, and volume using epigenetic age or accelerated epigenetic age as a predictor and controlling for sex. Epigenetic age was associated with surface area reduction of the left insula. It was also associated with cortical thinning and volume reduction in multiple regions, with prominent changes of cortical thickness in the left temporal regions and of volume in the bilateral orbital gyri. Finally, accelerated epigenetic age was negatively associated with right cuneus gyrus volume. Our findings suggest that understanding the mechanisms of epigenetic age acceleration in young individuals may yield valuable insights into the relationship between epigenetic aging and the cortical change and on the early development of neurocognitive pathology among young adults.

Relationship between sensory characteristics and cortical thickness/volume in autism spectrum disorders.

Individuals with autism spectrum disorders (ASDs) exhibit atypical sensory characteristics, impaired social skills, deficits in verbal and nonverbal communication, and restricted and repetitive behaviors. The relationship between sensory characteristics and brain morphological changes in ASD remains unclear. In this study, we investigated the association between brain morphological changes and sensory characteristics in individuals with ASD using brain image analysis and a sensory profile test. Forty-three adults with ASD and 84 adults with typical development underwent brain image analysis using FreeSurfer. The brain cortex was divided into 64 regions, and the cortical thickness and volume of the limbic system were calculated. The sensory characteristics of the participants were evaluated using the Adolescent/Adult Sensory Profile (AASP). Correlation analysis was performed for cortical thickness, limbic area volume, and AASP scores. In the ASD group, there was a significant positive correlation between visual sensory sensitivity scores and the right lingual cortical thickness (r = 0.500). There were also significant negative correlations between visual sensation avoiding scores and the right lateral orbitofrontal cortical thickness (r = -0.513), taste/smell sensation avoiding scores and the right hippocampal volume (r = -0.510), and taste/smell sensation avoiding scores and the left hippocampal volume (r = -0.540). The study identified associations among the lingual cortical thickness, lateral orbitofrontal cortical thickness, and hippocampal volume and sensory characteristics. These findings suggest that brain morphological changes may trigger sensory symptoms in adults with ASD.

System concentration shift as a regulator of transcription-translation system within liposomes.

Biochemical systems in living cells have their optimum concentration ratio among each constituent element to maintain their functionality. However, in the case of the biochemical system with complex interactions and feedbacks among elements, their activity as a system greatly changes by the concentration shift of the entire system irrespective of the concentration ratio among elements. In this study, by using a transcription-translation (TX-TL) system as the subject, we illustrate the principle of the nonlinear relationship between the system concentration and the activity of the system. Our experiment and simulation showed that shifts of the system concentration of TX-TL by dilution and concentration works as a switch of activity and demonstrated its ability to induce a biochemical system to confer the permeability of small molecules to liposomes. These results contribute to the creation of artificial cells with the switch and provide an insight into the emergence of protocells.

Elucidation of the relationship between sensory processing and white matter using diffusion tensor imaging tractography in young adults.

Sensory processing and behaviors are altered during the development of connectivity between the sensory cortices and multiple brain regions in an experience-dependent manner. To reveal the relationship between sensory processing and brain white matter, we investigated the association between the Adolescent/Adult Sensory Profile (AASP) and neural connectivity in the white matter tracts of 84 healthy young adults using diffusion tensor imaging (DTI). We observed a positive relationship between AASP scores (i.e., sensory sensitivity, sensation avoiding, activity level)/subscores (i.e., sensory sensitivity-activity level, sensation avoiding-touch) and DTI parameters in the cingulum-cingulate gyrus bundle (CCG) and between AASP subscores (i.e., sensory sensitivity-auditory) and a diffusion parameter in the uncinate fasciculus (UNC). The diffusion parameters that correlated with AASP scores/subscores and AASP quadrant scores (i.e., sensory avoiding and sensitivity) were axonal diffusivity (AD) and mean diffusivity (MD) in the CCG and MD in the UNC. Moreover, the increased sensory avoiding and sensitivity scores represent the sensitization of sensory processing, and the level of diffusivity parameters indicates white matter microstructure variability, such as axons and myelin from diffusivity of water molecules. Thus, the present study suggests that the CCG and UNC are critical white matter microstructures for determining the level of sensory processing in young adults.

A large, square-shaped, DNA origami nanopore with sealing function on a giant vesicle membrane.

Intaking molecular information from the external environment is essential for the normal functioning of artificial cells/molecular robots. Herein, we report the design and function of a membrane nanopore using a DNA origami square tube with a cross-section of 100 nm2. When the nanopore is added to a giant vesicle that mimics a cell membrane, the permeation of large external hydrophilic fluorescent molecules is observed. Furthermore, the addition of up to four ssDNA strands enables size-based selective transport of molecules. A controllable artificial nanopore should facilitate the communication between the vesicle components and their environment.

DNA Origami "Quick" Refolding Inside of a Micron-Sized Compartment.

Investigations into the refolding of DNA origami leads to the creation of reconstructable nanostructures and deepens our understanding of the sustainability of life. Here, we report the refolding of the DNA origami structure inside a micron-sized compartment. In our experiments, conventional DNA origami and truss-type DNA origami were annealed and purified to remove the excess staples in a test tube. The DNA origami was then encapsulated inside of a micron-sized compartment of water-in-oil droplets, composed of neutral surfactants. The re-annealing process was then performed to initiate refolding in the compartment. The resulting 100-nm-sized DNA nanostructures were observed using atomic force microscopy (AFM), and the qualities of their structures were evaluated based on their shape. We found that the refolding of the DNA origami structure was favored inside the droplets compared with refolding in bulk solution. The refolded structures were able to fold even under "quick" one-minute annealing conditions. In addition, the smaller droplets (average diameter: 1.2 µm) appeared to be more advantageous for the refolding of the origamis than larger droplets. These results are expected to contribute to understanding the principles of life phenomena based on multimolecular polymer self-assembly in a micron-sized compartment, and for the production and maintenance of artificially designed molecules.

Isothermal amplification of specific DNA molecules inside giant unilamellar vesicles.

An isothermal amplification circuit for specific DNA molecules was implemented in giant unilamellar vesicles. Using this circuit, over 5000-fold amplification of output DNAs was achieved, and the amplification behaviour depended on the concentration of input signal DNAs in a cell-sized compartment. Moreover, initiation of the amplification by photo-stimulation was demonstrated.

Large-Scale Preparation of Giant Vesicles by Squeezing a Lipid-Coated Marshmallow-like Silicone Gel in a Buffer.

Giant vesicles were efficiently produced by squeezing a lipid (l-α-phosphatidylcholine from egg yolk)-coated marshmallow-like flexible macroporous silicone monolith in a buffer. The mean diameter of the obtained vesicles was 2 µm, showing a wide distribution, up to tens of micrometers, which was similar to that of vesicles formed by a natural swelling method. It was possible to prepare vesicle dispersions on a scale from several microliters to several hundred milliliters. A protein synthesis system (PURE system) contained in vesicles prepared using this method functioned effectively. Our absorbing-squeezing method is expected to help in studies that use giant vesicles such as artificial cells and drug delivery systems.

Construction of T-Motif-Based DNA Nanostructures through Enzymatic Reactions.

The most common way to fabricate DNA nanostructures is to mix individually synthesized DNA oligomers in one pot. However, if DNA nanostructures could be produced through enzymatic reactions, they could be applied in various environments, including in vivo. Herein, an enzymatic method developed to construct a DNA nanostructure from a simple motif called a T-motif is reported. A long, repeated structure was replicated from a circular template by rolling circle amplification and then cleaved into T-motif segments by restriction enzymes. These motifs have been successfully assembled into a ladder-like nanostructure without purification or controlled annealing. This approach is widely applicable to constructing a variety of DNA nanostructures through enzymatic reactions.

In vitro transcription-translation using bacterial genome as a template to reconstitute intracellular profile.

In vitro transcription-translation systems (TX-TL) can synthesize most of individual genes encoded in genomes by using strong promoters and translation initiation sequences. This fact raises a possibility that TX-TL using genome as a template can reconstitute the profile of RNA and proteins in living cells. By using cell extracts and genome prepared from different organisms, here we developed a system for in vitro genome transcription-translation (iGeTT) using bacterial genome and cell extracts, and surveyed de novo synthesis of RNA and proteins. Two-dimensional electrophoresis and nano LC-MS/MS showed that proteins were actually expressed by iGeTT. Quantitation of transcription levels of 50 genes for intracellular homeostasis revealed that the levels of RNA synthesis by iGeTT are highly correlated with those in growth phase cells. Furthermore, activity of iGeTT was influenced by transcription derived from genome structure and gene location in genome. These results suggest that intracellular profiles and characters of genome can be emulated by TX-TL using genome as a template.

Revolving Vernier Mechanism Controls Size of Linear Homomultimer.

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.

DNA cytoskeleton for stabilizing artificial cells.

Cell-sized liposomes and droplets coated with lipid layers have been used as platforms for understanding live cells, constructing artificial cells, and implementing functional biomedical tools such as biosensing platforms and drug delivery systems. However, these systems are very fragile, which results from the absence of cytoskeletons in these systems. Here, we construct an artificial cytoskeleton using DNA nanostructures. The designed DNA oligomers form a Y-shaped nanostructure and connect to each other with their complementary sticky ends to form networks. To undercoat lipid membranes with this DNA network, we used cationic lipids that attract negatively charged DNA. By encapsulating the DNA into the droplets, we successfully created a DNA shell underneath the membrane. The DNA shells increased interfacial tension, elastic modulus, and shear modulus of the droplet surface, consequently stabilizing the lipid droplets. Such drastic changes in stability were detected only when the DNA shell was in the gel phase. Furthermore, we demonstrate that liposomes with the DNA gel shell are substantially tolerant against outer osmotic shock. These results clearly show the DNA gel shell is a stabilizer of the lipid membrane akin to the cytoskeleton in live cells.

Stepping operation of a rotary DNA origami device.

We constructed a rotary DNA origami device and tested its stepping operation on a mica substrate by sequential strand displacement with four different sets of signal DNA strands. This work paves the way for building a variety of dynamic rotary DNA nanodevices which respond to multiple signals.