ABSTRACT
Polymeric based composites have gained considerable attention as potential candidates for advanced radiation shielding applications due to their unique combination of high-density, radiation attenuation properties and improved mechanical strength. This study focuses on the comprehensive characterisation of polymeric based composites for radiation shielding applications. The objective of this study was to evaluate the physical, mechanical and microstructural properties of tungsten carbide-based epoxy resin and tungsten carbide cobalt-based epoxy resin for its efficiency in shielding against gamma-rays ranging from 0.6 up to 1.33 MeV. Polymeric composites with different weight percentages of epoxy resin (40 wt%, 35 wt%, 30 wt%, 25 wt%, 20 wt%, 15 wt% and 10 wt%) were fabricated, investigated and compared to conventional lead shield. The attenuation of the composites was performed using NaI (Tl) gamma-ray spectrometer to investigate the linear and mass attenuation coefficients, half value layer, and mean free path. High filler loadings into epoxy resin matrix (90% filler/10% epoxy) exhibited excellent gamma shielding properties. Mechanical properties, such as hardness were examined to assess the structural integrity and durability of the composites under various conditions. The fabricated composites showed a good resistance, the maximum hardness was attributed to composites with small thickness. The high loading of fillers in the epoxy matrix improved the microhardness of the composites. The distribution of the filler powder within the epoxy matrix was investigated using FESEM/EDX. The results revealed the successful incorporation of tungsten carbide and cobalt particles into the polymer matrix, leading to increased composite density and enhanced radiation attenuation. The unique combination of high-density, radiation attenuation, and improved mechanical properties positions polymeric based composites as promising candidates for radiation protection field.
ABSTRACT
The study aims to assess long-term radiological exposure risks and effects to both industrial workers and occupants living in the near vicinity of local tailing processing plants. The detrimental effects of licensing exemption were studied by comparing contaminated soil collected from 7 unlicensed-by the Atomic Energy Licensing Board-tailing processing plants with soil from control location. It was found that the average concentration of 226Ra, 232Th, and 40 K for all seven processing plants fell between the range of 0.1 ± 0.0-7.21 ± 0.1 Bqg-1, 0.1 ± 0.0-16.34 ± 0.27 Bqg-1, and 0.18 ± 0.01-1.74 ± 0.01 Bqg-1, respectively, showing observable indication of soil contamination with Technologically Enhanced Naturally Occurring Radioactive (TENORM) material. The annual effective dose was calculated which showed that most samples exceeded the recommended value of the ICRP of 1 mSvy-1 for non-radiation workers. Assessment of radiological hazards in the environment was done by calculating the radium equivalent value; revealing the exposure risk posed by the contaminated soil is substantial. Using the relatable inputs, the RESRAD-ONSITE computed code revealed that the dose due to internal exposure via inhalation of radon gas contributes the most to the overall exposure. The covering of the contaminated soil with a clean layer is effective in reducing external dose but ineffective for radon inhalation. RESRAD-OFFSITE computer code also revealed that the contribution of exposure via contaminated soil in the neighbouring vicinity is below the recommended 1 mSvy-1 threshold but still contributes to a significant amount cumulatively when considering other exposure pathways as well. The study proposes the introduction of clean cover soil as a viable option in reducing external dose from contaminated soil as 1 m of clean cover soil is able to reduce dose exposure by 23.8-30.5%.
Subject(s)
Radium , Radon , Humans , Environmental Monitoring , Environmental Pollution , SoilABSTRACT
Nuclear energy offers a wide range of applications, which include power generation, X-ray imaging, and non-destructive tests, in many economic sectors. However, such applications come with the risk of harmful radiation, thereby requiring shielding to prevent harmful effects on the surrounding environment and users. Concrete has long been used as part of structures in nuclear power plants, X-ray imaging rooms, and radioactive storage. The direction of recent research is headed toward concrete's ability in attenuating harmful energy radiated from nuclear sources through various alterations to its composition. Radiation shielding concrete (RSC) is a composite-based concrete that was developed in the last few years with heavy natural aggregates such as magnetite or barites. RSC is deemed a superior alternative to many types of traditional normal concrete in terms of shielding against the harmful radiation, and being economical and moldable. Given the merits of RSCs, this article presents a comprehensive review on the subject, considering the classifications, alternative materials, design additives, and type of heavy aggregates used. This literature review also provides critical reviews on RSC performance in terms of radiation shielding characteristics, mechanical strength, and durability. In addition, this work extensively reviews the trends of development research toward a broad understanding of the application possibilities of RSC as an advanced concrete product for producing a robust and green concrete composite for the construction of radiation shielding facilities as a better solution for protection from sources of radiation. Furthermore, this critical review provides a view of the progress made on RSCs and proposes avenues for future research on this hotspot research topic.
