Comparison of thermal and chemical enhanced recovery of DNAPL in saturated porous media: 2D tank pumping experiments and two-phase flow modelling.

Pumping experiments were performed in a 2D tank in order to estimate the recovery yield of pure heavy chlorinated organic compounds (DNAPL; dense non-aqueous phase liquids) by varying different parameters: permeability of the saturated zone, pumping flow rates, addition of surfactant and heating. Surfactant was added to decrease capillary forces involved in the entrapment of DNAPL in porous media while temperature was increased to reduce DNAPL viscosity (and hence increase its mobility). Chemical enhancement was performed with the addition of Sodium Dodecyl Benzene Sulfonate (SDBS) (at its Critical Micelle Concentration, to avoid DNAPL dissolution) and thermal enhancement was performed at 50 °C (to avoid DNAPL volatilization). The experiments were monitored with photography allowing, on the basis of image interpretation, to convert optical densities (OD) into water saturations (Sw). Image interpretations were compared with modelling results. The two-phase flow modelling was performed with the pressure-pressure formulation using capillary pressure and relative permeability functions based on the van Genuchten-Mualem equations. Measured volumes of DNAPL recovered as well as the displacement of the DNAPL-water interface (radius and height of the cone of depression) are consistent with the modelling results. Furthermore, chemical enhancement results in a significant increase in the recovery rates of DNAPL. The observed improvement in the recovery of DNAPL with chemical enhancement is due to the fact that: (i) the residual saturation inside the cone of depression is lower and (ii) the cone of depression radius and height increase. Thermal enhancement had no beneficial effect on DNAPL recovery rate or yield. This study shows that it is possible to accurately determine water and DNAPL saturations by image interpretation during pumping tests in a 2D tank in the laboratory. For field-scale applications, the two-phase flow model allows to determine remediation yields as well as the volumes of the cone of depression according to the different operating conditions.

Thermal and chemical enhanced recovery of heavy chlorinated organic compounds in saturated porous media: 1D cell drainage-imbibition experiments.

Chemical and thermal enhanced recovery of pure heavy chlorinated organic compounds (DNAPL; dense non-aqueous phase liquids) was investigated by using lab-scale 1D cells. Temperature was increased to reduce DNAPL viscosity (and hence increase its mobility), while surfactant was added to decrease capillary forces involved in the entrapment of DNAPL in porous media. Laboratory scale experiments, based on mass balance and indirect monitoring methods (i.e., permittivity, electrical resistivity and optical density), were conducted to quantify the effects of these enhancements. Heating the DNAPL up to 50 °C decreased its viscosity by a factor of two. The addition of a surfactant; i.e., Sodium Dodecyl Benzene Sulfonate (SDBS), at its Critical Micelle Concentration (to prevent DNAPL solubilization), decreased interfacial tensions by a factor of 12. Drainage-imbibition experiments performed in 1D cells provided retention curves (capillary pressure as a function of water saturation) of a two-phase (DNAPL-water) system in experimental glass bead porous media. The observed reduction of residual saturation (Srn) obtained with SDBS was 28% for 0.5 mm-diameter glass beads (GB) and 46% for 0.1 mm GB. No significant decrease in Sm was observed with thermal enhancement. The van Genuchten - Mualem model was found to satisfactorily reproduce the measured retention curves. Indirect measurements of water saturations (Sw) showed that: i. measured permittivities were very close to values modeled with the Complex Refractive Index Model (CRIM); ii. Archie's Law was less successful in reproducing measured electrical resistivities; iii. optical densities provide accurate estimations of Sw. At field scale, the combined monitoring of electrical resistivity (which provides a global picture) and permittivity (which yields locally precise but spatially limited information) is expected to significantly improve the collection of information on residual saturations Srn.

Novel CeO2-based screen-printed potentiometric electrodes for pH monitoring.

Nuclear waste repositories are being installed in deep excavated rock formations in some places in Europe to isolate and store radioactive waste. In France, the Callovo-Oxfordian formation (COx) is a possible candidate for nuclear waste storage. This work investigates the applicability of CeO(2)-based oxides (CeO(2), Ce(0.8)Sm(0.2)O(2) and Ce(0.8)Zr(0.2)O(2)) for monitoring the pH of the COx pore water (T=25°C). The study is limited to the pH range between 5.5 and 13.2, which includes the pH values that have been encountered or are anticipated in the COx formation during its evolution as radioactive waste repository due mainly to alkalinisation, an increase in salinity, and a decrease in redox potential. Screen-printing was done to assemble electrodes and rapidly generate data sets. The electrochemical behavior of CeO(2)-based screen-printed electrodes (CeO(2)-based SPEs) was determined by cyclic voltammetry and electrochemical impedance spectroscopy. The use of the electrodes for pH sensing was then evaluated by potentiometric measurements. The feasibility of measuring pH with CeO(2)-based SPEs was first tested in NH(4)Cl/NH(3) buffer solutions, leading to electrode calibration over the widest range of pH, from around neutral to basic pH. Experiments were then conducted in NaHCO(3)/Na(2)CO(3) buffer samples similar to conditions prevailing in the COx formation. Ce(0.8)Zr(0.2)O(2) SPEs exhibit a near-Nernstian behavior (sensitivity -(51±2)mV/pH) in the pH range of 5.5-13.2 at 25°C. Electrode response was slightly affected by the direction of the pH change. Electrode reliability was clearly demonstrated for pH monitoring. Probes based on the same components, but more durably designed, could be considered for pH measurements in radioactive waste repositories.

Posttraumatic neuroma of the radial nerve treated with an autogenous epineural conduit technique. A case report.

We present the outcome of the first clinical application of a new technique using an epineural flap to bridge a short nerve defect. A 28-year-old male had suffered a radial nerve laceration at the lower third of the arm, proximal to the brachioradialis branch, 3 weeks before surgery. During surgery, a neuroma-in-continuity was excised preserving the epineural sleeve. Two longitudinal epineural flaps were created, one from the proximal and one from the distal nerve stump and used to bridge a 1-cm-long nerve defect. Each epineurium flap was sutured to the intact epineurium of the other side and additionally to each other. An electromagnetic nerve stimulator was used to enhance the nerve regeneration process. Nerve regeneration was followed up for 17 months with excellent functional results.

The place of local/regional perforator flaps in complex traumas of the forearm.

BACKGROUND: Our aim was to conduct a retrospective study regarding the advantages of doing the all-in-one reconstruction in the same step with the debridement, and the possibility of using the local/regional perforator flaps to cover the tissue defects. METHODS: We reviewed a series of 137 cases from 1999 until now, for acute traumas with tissue defects of the forearm. We performed a regional perforator flap in 16 cases, and a local perforator flap in 121 cases. These flaps were used for both simple and complex defects coverage, including 26 cases with fractures and devascularization. RESULTS: The follow-up was between 2 months and 2 years. In all the cases the extremity was salvaged and an useful functional recovery was obtained. A very good evolution, with complete survival of the flap was recorded in 133 cases. We completely lost only one flap, and registered minor complications in three cases. CONCLUSION: The local perforator flaps represent a good and safe indication for small and medium defects in the forearm.

A new technique of autogenous conduits for bridging short nerve defects. An experimental study in the rabbit.

BACKGROUND: [corrected] Nerve grafting is the most reliable used procedure to bridge a neural defect, but it is associated with donor site morbidity. In experimental surgery the search for an optimal nerve conduit led to the use of biological and artificial material. Nerve regeneration through epineural conduits for bridging short nerve defect was examined. METHODS: Four groups including 126 New Zealand rabbits were used. There were 3 study groups (A, B and C) and 1 control group (D). A 10-mm long sciatic nerve defect was bridged either with 3 variations of an epineural flap (Groups A, B and C) or with a nerve graft (Group D). Animals from all groups were examined 21, 42 and 91 days postoperatively to evaluate nerve regeneration employing light microscopy and immunocytochemistry. Nerve regeneration was studied in transverse sections at 3, 6 and 9 mm from the proximal stump. Using muscle stimulator the gastrocnemius contractility was examined at 91 days post surgery in all groups. FINDINGS: Immunohistochemical and functional evaluation showed nerve regeneration resembling the control group, especially in group A, were an advancement epineural flap was used. CONCLUSION: An epineurial flap can be used to bridge a nerve defect with success.

Chromate reduction at low sulphate concentration in hydrogen-fed bioreactors.

Aimed at developing a bioremediation process to treat Cr(VI)-bearing water at low sulphate concentration in order to reduce excess sulphide production, the highly toxic, mutagenic, and soluble Cr(VI) was reduced to the less toxic and insoluble Cr(III) in 2-litre fixed-bed reactors inoculated with the sulphate-reducing bacterium (SRB) Desulfomicrobium norvegicum, capable of performing direct enzymatic Cr(VI) reduction. H2 was used as the electron source. The fixed-films were developed on three different supports: a PVC cross-flow material, a pozzolana, and a ceramic granulate. The phased experiments began with a progressive increase of the Cr(VI) concentration in the feed to the column reactors, followed by a progressive decrease of the sulphate concentration. Inhibition by Cr(VI) was less pronounced with pozzolana than with the other supports; when the pozzolana column was fed with a medium containing 100 mg l(-1) Cr(VI) and only 250 mg l(-1) sulphate, the lowest residence time that could be applied for complete Cr(VI) reduction was 16 h. The molar ratio between the sulphate and Cr(VI) reduction rates was decreased down to 1.5, suggesting that indirect reaction with HS was not the sole mechanism of Cr(VI) reduction.

Reduction of chromate by fixed films of sulfate-reducing bacteria using hydrogen as an electron source.

The ability of sulfate-reducing bacteria (SRB) to reduce chromate, Cr(VI), was evaluated using fixed-film growth systems and H2 as the electron source. A main objective of the experiment was to distinguish between direct enzymatic reduction and indirect reduction by hydrogen sulfide, in order to subsequently verify and control the synergy of these two mechanisms. In batch experiments with the sulfate-reducing consortium CH10 selected from a mining site, 50 mg l(-1) Cr(VI) was reduced in 15 min in the presence of 500 mg l(-1) hydrogen sulfide compared to 16 mg l(-1) reduced in 1 h without hydrogen sulfide. Fixed films of a CH10 population and Desulfomicrobium norvegicum were fed-batch grown in a column bioreactor. After development of the biofilm, hydrogen sulfide was removed and the column was fed continuously with a 13-mg l(-1) Cr(VI) solution. Specific Cr(VI) reduction rates on pozzolana were close to 90 mg Cr(VI) h(-1) per gram of protein. Exposure to Cr(VI) had a negative effect on the subsequent ability of CH10 to reduce sulfate, but the inhibited bacteria remained viable.

Microcomputer system for data acquisition and software handling in chromatography.

A complete, powerful yet simple and inexpensive microcomputer system for chromatography is described. It consists of an electronic interface card and an exploiting software, both controlled by an independent microcomputer. The interface includes all necessary circuits for digitizing the chromatographic signal and for controlling the actuators and the sensors connected with the chromatograph. The software, clock-interrupted, allows simultaneous data acquisition, mathematical treatment, connected plotting, and printing, and drives injection valves and gradient elution pumps. This system is both suitable for high-speed capillary gas chromatography and for high-performance liquid chromatography.