Improving Scalability of copper recovery in saline microbial fuel cells with microtubular polypyrrole-based cathodic electrocatalysts.

Microbial fuel cells (MFC) are emerging energy-efficient systems for copper (Cu) electrowinning from waste streams by coupling it with anodic oxidation of organics in wastewater. However, there is a lack of research examining scalable electrocatalysts for Cu electrowinning at low cathodic overpotentials in highly saline catholytes often found in e-waste leachates. The challenge of developing resilient anodic biofilms that withstand the antagonistic effects of ions migrating from catholytes in saline MFC also needs to be addressed. In this study, polypyrrole (PPy) cathodic electrocatalysts were developed and coupled with a robust halophilic anodic biofilm in MFC to improve the kinetics of Cu electrowinning from acidic chloride-based catholytes. Electrochemical characterisation of these cathodes revealed shuttling of electrons by redox-active PPy via the formation of intermediate Cu+-complexes as an energy-efficient pathway for producing metallic Cu. High power densities ranging from 0.63 ± 0.17 to 0.73 ± 0.05 W m-2 were achieved with undoped-PPy and phytic acid doped-PPy cathodes with simultaneous recovery of ∼97% Cu. These electrocatalysts also exhibited low charge transfer resistance (3-8 mΩ m2) that met the requisites for scalable cathodes in MFC. However, a decrease in the efficiency of PPy cathodes was observed over 5 d due to competing reactions at their interfaces, including re-oxidation of deposited Cu and cathodic corrosion, with further studies suggested to enhance their corrosion resistance. Nonetheless, integrating PPy electrocatalysts for Cu electrowinning in saline MFC has advanced its outlooks as an energy-efficient downstream process for urban mining of Cu from e-waste.

Synergistic interaction between scrap tyre and plastics for the production of sulphur-free, light oil from fast co-pyrolysis.

Fast co-pyrolysis offers a sustainable solution for upcycling polymer waste, including scrap tyre and plastics. Previous studies primarily focused on slow heating rates, neglecting synergistic mechanisms and sulphur transformation in co-pyrolysis with tyre. This research explored fast co-pyrolysis of scrap tyre with polypropylene (PP), low-density polyethylene (LDPE), and polystyrene (PS) to understand synergistic effects and sulphur transformation mechanisms. A pronounced synergy was observed between scrap tyre and plastics, with the nature of the synergy being plastic-type dependent. Remarkably, blending 75 wt% PS or LDPE with tyre effectively eliminated sulphur-bearing compounds in the liquid product. This reduction in sulphur content can substantially mitigate the release of hazardous materials into the environment, emphasizing the environmental significance of co-pyrolysis. The synergy between PP or LDPE and tyre amplified the production of lighter hydrocarbons, while PS's interaction led to the creation of monocyclic aromatics. These findings offer insights into the intricate chemistry of scrap tyre and plastic interactions and highlight the potential of co-pyrolysis in waste management. By converting potential pollutants into valuable products, this method can significantly reduce the release of hazardous materials into the environment.

Scaling up of dual-chamber microbial electrochemical systems - An appraisal using systems design approach.

Impetus to minimise the energy and carbon footprints of evolving wastewater resource recovery facilities has promoted the development of microbial electrochemical systems (MES) as an emerging energy-neutral and sustainable platform technology. Using separators in dual-chamber MES to isolate anodic and cathodic environments creates endless opportunities for its myriad applications. Nevertheless, the high internal resistance and the complex interdependencies among various system factors have challenged its scale-up. This critical review employed a systems approach to examine the complex interdependencies and practical issues surrounding the implementation and scalability of dual-chamber MES, where the anodic and cathodic reactions are mutually appraised to improve the overall system efficiency. The robustness and stability of anodic biofilms in large-volume MES is dependent on its inoculum source, antecedent history and enrichment strategies. The composition and anode-respiring activity of these biofilms are modulated by the anolyte composition, while their performance demands a delicate balance between the electrode size, macrostructure and the availability of substrates, buffers and nutrients when using real wastewater as anolyte. Additionally, the catholyte governed the reduction environment and associated energy consumption of MES with scalable electrocatalysts needed to enhance the sluggish reaction kinetics for energy-efficient resource recovery. A comprehensive assessment of the dual-chamber reactor configuration revealed that the tubular, spiral-wound, or plug-in modular MES configurations are suitable for pilot-scale, where it could be designed more effectively using efficient electrode macrostructure, suitable membranes and bespoke strategies for continuous operation to maximise their performance. It is anticipated that the critical and analytical understanding gained through this review will support the continuous development and scaling-up of dual-chamber MES for prospective energy-neutral treatment of wastewater and simultaneous circular management of highly relevant environmental resources.

Biochemical trade-offs and opportunities of commercialized microalgae cultivation under increasing carbon dioxide.

Microalgae's exceptional photosynthetic prowess, CO2 adaptation, and high-value bioproduct accumulation make them prime candidates for microorganism-based biorefineries. However, most microalgae research emphasizes downstream processes and applications rather than fundamental biomass and biochemical balances and kinetic under the influence of greenhouse gases such as CO2. Therefore, three distinctly different microalgae species were cultivated under 0% to 20% CO2 treatments to examine their biochemical responses, biomass production and metabolite accumulations. Using a machine learning approach, it was found that Chlorella sorokiniana showed a positive relationship between biomass and chl a, chl b, carotenoids, and carbohydrates under increasing CO2 treatments, while Chlamydomonas angulosa too displayed positive relationships between biomass and all studied biochemical contents, with minimal trade-offs. Meanwhile, Nostoc sp. exhibited a negative correlation between biomass and lipid contents under increasing CO2 treatment. The study showed the potential of Chlorella, Chlamydomonas and Nostoc for commercialization in biorefineries and carbon capture systems where their trade-offs were identified for different CO2 treatments and could be prioritized based on commercial objectives. This study highlighted the importance of understanding trade-offs between biomass production and biochemical yields for informed decision-making in microalgae cultivation, in the direction of mass carbon capture for climate change mitigation.

Catalysing electrowinning of copper from E-waste: A critical review.

Smart technologies and digitalisation have increased the consumption of scarce metals that threaten the sustainability of intricated industries. Additionally, the growing streams of waste electrical and electronic equipment (e-waste) are significant hazards to public health and the environment. Thus, there is an escalating need to recover metals from e-waste for sustainable management of metal resources. Hydrometallurgical processing of e-waste, involving copper (Cu) leaching and its subsequent recovery from pregnant leach solution (PLS) via electrowinning, has emerged as an efficient strategy to close the recycling loop. Electrowinning from PLS demonstrated higher Cu recovery efficiency and operational feasibility with a lower reagent use and lesser waste generation. Nevertheless, multiple issues challenged its practical implementation, including selective recovery of Cu from PLS containing mixed metals and high energy consumption. This review (1) identifies the factors affecting Cu electrowinning from PLS; (2) evaluates the composition of lixiviants influencing Cu electrowinning; (3) appraises various catalysts developed for enhancing Cu electrodeposition; and (4) reviews coupled systems that minimised process energy consumption. From the literature review, electrocatalysts are prospective candidates for improving Cu electrowinning as they reduced the cathodic reduction overpotentials, enhanced surface reaction kinetics and increased current efficiency. Other catalysts, including bioelectrocatalysts and photoelectrocatalysts, are applicable for dilute electrolytes with further investigations required to validate their feasibility. The coupled systems, including slurry electrolysis, bioelectrochemical systems and coupled redox fuel cells, minimise process energy requirements by systematically coupling the cathodic reduction reaction with suitable anodic oxidation reactions having thermodynamically low overpotentials. Among these systems, slurry electrolysis utilising a single-step processing of e-waste is feasible for commericalisation though operational challenges must be addressed to improve its sustainability. The other systems require further studies to improve their scalability. It provides an important direction for energy-efficient Cu electrowinning from PLS, ultimately promoting a circular economy for the scarce metal resources.

Distinctive correlations between cell concentration and cell size to microalgae biomass under increasing carbon dioxide.

Carbon capture and storage (CCS) via microalgae cultivations is getting renewed interest as climate change mitigation effort, owing to its excellent photosynthetic and CO2 fixation capability. Microalgae growth is monitored based on their biomass, cell concentrations and cell sizes. The key parametric relationships on microalgae growth under CO2 are absent in previous studies and this inadequacy hampers the design and scale-up of microalgae-based CCS. In this study, three representative microalgae species, Chlorella, Nostoc and Chlamydomonas, were investigated for establishing key correlations of cell concentrations and sizes towards their biomass fluctuations under CO2 influences of 0% to 20% volume ratios (v/v). This revealed that Chlorella and Chlamydomonas cell concentrations significantly contributed towards increasing biomass concentration under CO2 elevations. Chlorella and Nostoc cell sizes were enhanced at 20% (v/v). These findings provided new perspectives on growth responses under increasing CO2 treatment, opening new avenues on CCS schemes engineering designs and biochemical production.

E-waste in the international context - A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery.

E-waste, or waste generated from electrical and electronic equipment, is considered as one of the fastest-growing waste categories, growing at a rate of 3-5% per year in the world. In 2016, 44.7 million tonnes of e-waste were generated in the world, which is equivalent to 6.1 kg for each person. E-waste is classified as a hazardous waste, but unlike other categories, e-waste also has significant potential for value recovery. As a result it is traded significantly between the developed and developing world, both as waste for disposal and as a resource for metal recovery. Only 20% of global e-waste in 2016 was properly recycled or disposed of, with the fate of the remaining 80% undocumented - likely to be dumped, traded or recycled under inferior conditions. This review paper provides an overview of the global e-waste resource and identifies the major challenges in the sector in terms of generation, global trade and waste management strategies. It lists the specific hazards associated with this type of waste that need to be taken into account in its management and includes a detailed overview of technologies employed or proposed for the recovery of value from e-waste. On the basis of this overview the paper identifies future directions for effective e-waste processing towards sustainable waste/resource management. It becomes clear that there is a strong divide between developed and developing countries with regard to this sector. While value recovery is practiced in centralised facilities employing advanced technologies in a highly regulated industrial environment in the developed world, in the developing world such recovery is practiced in a largely unregulated artisanal industry employing simplistic, labour intensive and environmentally hazardous approaches. Thus value is generated safely in the hi-tech environment of the developed world, whereas environmental burdens associated with exported waste and residual waste from simplistic processing remain largely in developing countries. It is argued that given the breadth of available technologies, a more systematic evaluation of the entire e-waste value chain needs to be conducted with a view to establishing integrated management of this resource (in terms of well-regulated value recovery and final residue disposal) at the appropriately local rather than global scale.