ABSTRACT
Creating a high-frequency electron system demands a high saturation velocity (υsat). Herein, we report the high-field transport properties of multilayer van der Waals (vdW) indium selenide (InSe). The InSe is on a hexagonal boron nitride substrate and encapsulated by a thin, noncontinuous In layer, resulting in an impressive electron mobility reaching 2600 cm2/(V s) at room temperature. The high-mobility InSe achieves υsat exceeding 2 × 107 cm/s, which is superior to those of other gapped vdW semiconductors, and exhibits a 50-60% improvement in υsat when cooled to 80 K. The temperature dependence of υsat suggests an optical phonon energy (âωop) for InSe in the range of 23-27 meV, previously reported values for InSe. It is also notable that the measured υsat values exceed what is expected according to the optical phonon emission model due to weak electron-phonon scattering. The superior υsat of our InSe, despite its relatively small âωop, reveals its potential for high-frequency electronics, including applications to control cryogenic quantum computers in close proximity.
ABSTRACT
Low- or self-powered infrared sensors can be used in a broad range of applications, including networking mobile edge devices and image recognition for autonomous driving technology. Here, we show state-of-the-art self-powered near-infrared (NIR) sensors using graphene/In/InSe/Au as a photoactive region. The self-powered NIR sensors show outstanding performance, achieving a photoresponsivity of â¼8.5 A W-1 and a detectivity of â¼1012 Jones at 850 nm light. Multiple self-powered InSe photodetectors with different device structures and contacts were systematically investigated. In particular, the asymmetrically assembled graphene/In/InSe/Au vertical heterostructure offers a high built-in field, which gives rise to efficient electron-hole pair separation and transit time that is shorter than the photocarrier lifetime. The built-in potential across the InSe was estimated using the Schottky barrier height at each metal contact with InSe, obtained using density functional theory calculations. We also demonstrate InSe vertical field-effect transistors and provide an out-of-plane carrier mobility of InSe. Using the out-of-plane mobility and structural parameters of each device, the built-in field, drift velocity, and corresponding transit time are estimated.
ABSTRACT
Van der Waals (vdW) heterostructures, consisting of a variety of low-dimensional materials, have great potential use in the design of a wide range of functional devices thanks to their atomically thin body and strong electrostatic tunability. Here, we demonstrate multi-functional indium selenide (InSe)/black phosphorous (BP) heterostructures encapsulated by hexagonal boron nitride. At a positive drain bias (VD), applied on the BP while the InSe is grounded, our heterostructures show an intermediate gate voltage (VBG) regime where the current hardly changes, working as a ternary transistor. By contrast, at a negative VD, the device shows strong negative differential transconductance characteristics; the peak current increases up to ~5 µA and the peak-to-valley current ratio reaches 1600 at VD = -2 V. Four-terminal measurements were performed on each layer, allowing us to separate the contributions of contact resistances and channel resistance. Moreover, multiple devices with different device structures and contacts were investigated, providing insight into the operation principle and performance optimization. We systematically investigated the influence of contact resistances, heterojunction resistance, channel resistance, and the thickness of BP on the detailed operational characteristics at different VD and VBG regimes.
