Demonstration of In-Memory Biosignal Analysis: Novel High-Density and Low-Power 3D Flash Memory Array for Arrhythmia Detection.

Smart healthcare systems integrated with advanced deep neural networks enable real-time health monitoring, early disease detection, and personalized treatment. In this work, a novel 3D AND-type flash memory array with a rounded double channel for computing-in-memory (CIM) architecture to overcome the limitations of conventional smart healthcare systems: the necessity of high area and energy efficiency while maintaining high classification accuracy is proposed. The fabricated array, characterized by low-power operations and high scalability with double independent channels per floor, exhibits enhanced cell density and energy efficiency while effectively emulating the features of biological synapses. The CIM architecture leveraging the fabricated array achieves high classification accuracy (93.5%) for electrocardiogram signals, ensuring timely detection of potentially life-threatening arrhythmias. Incorporated with a simplified spike-timing-dependent plasticity learning rule, the CIM architecture is suitable for robust, area- and energy-efficient in-memory arrhythmia detection systems. This work effectively addresses the challenges of conventional smart healthcare systems, paving the way for a more refined healthcare paradigm.

Proposition of Adaptive Read Bias: A Solution to Overcome Power and Scaling Limitations in Ferroelectric-Based Neuromorphic System.

Hardware neuromorphic systems are crucial for the energy-efficient processing of massive amounts of data. Among various candidates, hafnium oxide ferroelectric tunnel junctions (FTJs) are highly promising for artificial synaptic devices. However, FTJs exhibit non-ideal characteristics that introduce variations in synaptic weights, presenting a considerable challenge in achieving high-performance neuromorphic systems. The primary objective of this study is to analyze the origin and impact of these variations in neuromorphic systems. The analysis reveals that the major bottleneck in achieving a high-performance neuromorphic system is the dynamic variation, primarily caused by the intrinsic 1/f noise of the device. As the device area is reduced and the read bias (VRead ) is lowered, the intrinsic noise of the FTJs increases, presenting an inherent limitation for implementing area- and power-efficient neuromorphic systems. To overcome this limitation, an adaptive read-biasing (ARB) scheme is proposed that applies a different VRead to each layer of the neuromorphic system. By exploiting the different noise sensitivities of each layer, the ARB method demonstrates significant power savings of 61.3% and a scaling effect of 91.9% compared with conventional biasing methods. These findings contribute significantly to the development of more accurate, efficient, and scalable neuromorphic systems.

In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops.

The elastic-to-plastic transition during the deformation of a dislocation-free nanoscale volume is accompanied by displacement bursts associated with dislocation nucleation. The dislocations that nucleate during the so-called "pop-in" burst take the form of prismatic dislocation loops (PDLs) and exhibit characteristic burst-like emission and plastic recovery. Here, we report the in-situ transmission electron microscopy (TEM) observation of the initial plasticity ensued by burst-like emission of PDLs on nanoindentation of dislocation-free Au nanowires. The in-situ TEM nanoindentation showed that the nucleation and subsequent cross slip of shear loop(s) are the rate-limiting steps. As the indentation size increases, the cross slip of shear loop becomes favored, resulting in a transition from PDLs to open half-loops to helical dislocations. In the present case of nanoindentation of dislocation-free volumes, the PDLs glide out of the indentation stress field while spreading the plastic zone, as opposed to the underlying assumption of the Nix-Gao model.

Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM.

Mechanical response of metal nanowires has recently attracted a lot of interest due to their ultra-high strengths and unique deformation behaviours. Atomistic simulations have predicted that face-centered cubic metal nanowires deform in different modes depending on the orientation between wire axis and loading direction. Here we report, by combination of in situ transmission electron microscopy and molecular dynamic simulation, the conditions under which particular deformation mechanisms take place during the uniaxial loading of [110]-oriented Au nanowires. Furthermore, by performing cyclic uniaxial loading, we show reversible plastic deformation by twinning and consecutive detwinning in tension and compression, respectively. Molecular dynamics simulations rationalize the observed behaviours in terms of the orientation-dependent resolved shear stress on the leading and trailing partial dislocations, their potential nucleation sites and energy barriers. This reversible twinning-detwinning process accommodates large strains that can be beneficially utilized in applications requiring high ductility in addition to ultra-high strength.

A near single crystalline TiO2 nanohelix array: enhanced gas sensing performance and its application as a monolithically integrated electronic nose.

We present high performance gas sensors based on an array of near single crystalline TiO(2) nanohelices fabricated by rotating oblique angle deposition (OAD). The combination of large surface-to-volume ratio, extremely small size (<30 nm) comparable to the Debye length, a near single crystallinity of TiO(2) nanohelices, together with the unique top-and-bottom electrode configuration hugely improves the H(2)-sensing performance, including ∼10 times higher response at 50 ppm, approximately a factor of 5 lower detection limit, and much faster response time than the conventional TiO(2) thin film devices. Beyond such remarkable performance enhancement, the excellent compatibility of the OAD method compared with the conventional micro-fabrication technology opens a new avenue for monolithic integration of high-performance chemoresistive sensors to fabricate a simple, low cost, reliable, yet fully functional electronic nose and multi-functional smart chips for in situ environmental monitoring.