Spontaneous Avascular Necrosis of the Humeral Head Following COVID-19 Vaccination.

We report a case of a 40-year-old man who presented with left shoulder pain and marked functional impairment two days after receiving the second dose of the Pfizer COVID-19 vaccine. Advanced imaging demonstrated focal avascular necrosis (AVN) of his humeral head. Initial management included simple analgesics, activity modification, and an ultrasound-guided intra-articular hydrodilatation injection. The patient subsequently had an improved range of motion but persistent severe shoulder pain. He has now been offered surgical intervention. Despite having risk factors for developing AVN previously, the patient did not demonstrate any recent risk factors for developing the disease. COVID-19 vaccination is known to cause severe joint pain and stiffness rarely. However, avascular necrosis is not a known or documented side effect. His symptoms arose directly after the administration of the vaccine, with no other demonstrable cause. Therefore, we are reporting COVID-19 vaccination as a potential new risk factor for AVN of the humeral head.

Reverse shoulder replacement versus hemiarthroplasty for proximal humeral fracture in elderly patients: a systematic review.

This systematic review of the literature aims to analyse current knowledge to inform choice between hemiarthroplasty (HA) and reverse total shoulder arthroplasty (rTSA) for managing proximal humerus fractures (PHF) in elderly patients; the aim is to understand if rTSA can be considered the gold standard for treating PHF in the elderly when surgical fixation or conservative treatment is not viable options. Studies reporting outcomes and complications of PHF treated with shoulder arthroplasty in the elderly were included. Studies were in English and published after 2008. Evidence levels I, II, III and IV were included. According to PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, a comprehensive literature search was conducted using Medline, CINAHL (Cumulative Index to Nursing and Allied Health Literature) and PubMed search engines, as well as the Cochrane Central Register of Controlled Trials. General data collected were study design, number of patients treated with HA and rTSA, age of patients (mean, mean and SD, mean and range), length of follow-up, type of implant, and clinical outcomes. rTSA can be regarded as the gold standard for surgical management of displaced 3 and 4-part fractures in the elderly. However, the literature offers mostly low-quality studies, thereby requiring further work to achieve a full understanding of this important topic.

Degenerative rotator cuff tear, repair or not repair? A review of current evidence.

INTRODUCTION: We review the literature and highlight the important factors to consider when counselling patients with non-traumatic rotator cuff tears on which route to take. Factors include the clinical outcomes of surgical and non-surgical routes, tendon healing rates with surgery (radiological outcome) and natural history of the tears if treated non-operatively. METHODS: A PRISMA-compliant search was carried out, including the online databases PubMed and Embase™ from 1960 to the end of June 2018. FINDINGS: A total of 49 of the 743 (579 PubMed and 164 Embase™) results yielded by the preliminary search were included in the review. There is no doubt that the non-surgical route with an appropriate physiotherapy programme has a role in the management of degenerative rotator cuff tears. This is especially the case in patients with significant risk factors for surgery, those who do not wish to go through a surgical treatment and those with small, partial and irreparable tears. However, rotator cuff repair has a good clinical outcome with significant improvements in pain, range of motion, strength, quality of life and sleep patterns.

Are commercially-available precontoured anatomical clavicle plating systems offering the purported superior optimum fitting to the clavicle? A cadaveric analysis and review of literature.

PURPOSE: The indication for operative treatment of displaced midshaft clavicle fractures remains controversial. However, if plate fixation is considered, implant prominence and skin irritation are the most common causes for re-operation. Low profile implants as well as closely contouring plates to the individual anatomy may reduce these complications. The aim of this study was to compare the fitting accuracy and implant prominence of 3.5mm pelvic reconstruction plates (PRP) with pre-contoured anatomical clavicle plates (PACP) for midshaft clavicle fractures. METHODS: Three-dimensional data of the largest, median and smallest male and female clavicle of an existing database of 89 cadaveric clavicles were included for analysis. A three-dimensional model of a commercially available PACP was used for digitally positioning of the plate on the segmented clavicles. Three-dimensional printouts of each clavicle were produced and the 3.5mm reconstruction plates were manually bent and positioned by the senior author. Computed tomography scans and three-dimensional reconstructions were then obtained to digitally compare the fitting accuracy and implant prominence. RESULTS: Pelvic reconstruction plates offered superior fitting accuracy and lower implant prominence compared to PACP. The largest difference in implant prominence was observed in large sized female clavicles and measured 3.6mm. CONCLUSION: Both, the less costly PRP plates and commercially available PACP for midshaft fractures of the clavicle demonstrated a clinically acceptable fitting accuracy. The manually bent pelvic-reconstruction plates demonstrated reduced implant prominence with superior fitting. Hypothetically this might contribute to a reduced rate of reoperation. LEVEL OF EVIDENCE: Level IV cadaveric study.

Can a total knee arthroplasty be both rotationally unconstrained and anteroposteriorly stabilised? A pulsed fluoroscopic investigation.

OBJECTIVES: Throughout the 20th Century, it has been postulated that the knee moves on the basis of a four-bar link mechanism composed of the cruciate ligaments, the femur and the tibia. As a consequence, the femur has been thought to roll back with flexion, and total knee arthroplasty (TKA) prostheses have been designed on this basis. Recent work, however, has proposed that at a position of between 0° and 120° the medial femoral condyle does not move anteroposteriorly whereas the lateral femoral condyle tends, but is not obliged, to roll back - a combination of movements which equates to tibial internal/ femoral external rotation with flexion. The aim of this paper was to assess if the articular geometry of the GMK Sphere TKA could recreate the natural knee movements in situ/in vivo. METHODS: The pattern of knee movement was studied in 15 patients (six male: nine female; one male with bilateral TKAs) with 16 GMK Sphere implants, at a mean age of 66 years (53 to 76) with a mean BMI of 30 kg/m(2) (20 to 35). The motions of all 16 knees were observed using pulsed fluoroscopy during a number of weight-bearing and non-weight-bearing static and dynamic activities. RESULTS: During maximally flexed kneeling and lunging activities, the mean tibial internal rotation was 8° (standard deviation (sd) 6). At a mean 112° flexion (sd 16) during lunging, the medial and lateral condyles were a mean of 2 mm (sd 3) and 8 mm (sd 4) posterior to a transverse line passing through the centre of the medial tibial concavity. With a mean flexion of 117° (sd 14) during kneeling, the medial and lateral condyles were a mean of 1 mm (sd 4) anterior and 6 mm (sd 4) posterior to the same line. During dynamic stair and pivoting activities, there was a mean anteroposterior translation of 0 mm to 2 mm of the medial femoral condyle. Backward lateral condylar translation occurred and was linearly related to tibial rotation. CONCLUSION: The GMK Sphere TKA in our study group shows movements similar in pattern, although reduced in magnitude, to those in recent reports relating to normal knees during several activities. Specifically, little or no translation of the medial femoral condyle was observed during flexion, but there was posterior roll-back of the lateral femoral condyle, equating to tibiofemoral rotation. We conclude that the GMK Sphere is anteroposteriorly stable medially and permits rotation about the medial compartment.Cite this article: Professor G. Scott. Can a total knee arthroplasty be both rotationally unconstrained and anteroposteriorly stabilised?: A pulsed fluoroscopic investigation. Bone Joint Res 2016;5:80-86. DOI: 10.1302/2046-3758.53.2000621.

Quality of life in patients with major depressive disorder.

This descriptive, cross sectional, comparative and analytical study assessed the quality of life of major depressive patients and healthy controls. It was carried out in the department of psychiatry of Bangabandhu Sheikh Mujib Medical University (BSMMU) on patients of major depressive disorder according to structured clinical interview (SCID and diagnostic and statistical Manual) (DSM-IV) criteria. The study used world health organization quality of life scale (WHO QoL -BREF) Bangla version to assess QoL of major depressive patients. The study assessed eighty patients of major depressive disorder who were recruited purposively from the Department of Psychiatry, BSMMU who were above the age of 18 years irrespective of sex. Same number of age, sex matched hospital staff of different strata of the BSMMU were included in this study. The study shows that the all parameters of quality of life scales in patients (mean±SD) were Overall health (case 2.20±0.77 & control 3.79±0.52), Physical (case 2.77±0.383 & control 3.44±0.322), Psychological (case 2.53±0.353 & control 3.51±0.382), Social (case 2.88±0.65 & control 3.85±0.543), Environmental (case 2.87±0.533 & control 3.27±0.514) and overall quality of life (case 1.94±0.817 & control 3.71±0.556) which major depressive disorder were significantly reduced.

Strengthened lithium for x-ray blast windows.

Lithium's high x-ray transparency makes it an attractive material for windows intended to protect soft x-ray diagnostics in high energy density experiments. Pure lithium is soft and weak, but lithium mixed with lithium hydride powder becomes harder and stronger, in principle without any additional x-ray absorption. A comparison with the standard material for x-ray windows, beryllium, suggests that lithium or lithium strengthened by lithium hydride may well be an excellent option for such windows.

System for continuous production of nanophase materials using a microwave-driven polyol process.

A prototype system is described for the large scale, continuous production of nanophase metals, metal oxides, and other nanophase materials using the polyol process. The polyol process employs an organic solvent such as ethylene glycol to reduce a metal oxide/metal salt at high temperature to the metal oxide or metal. The system employs a 6 kW, 2.45 GHz microwave source to rapidly heat the continuously flowing solution to a desired process temperature as it flows through a silica tube placed along the center line of a section of waveguide.

Artifacts introduced by ion milling in Al-Li-Cu alloys.

Ion milling is commonly used to prepare specimens for observation under transmission electron microscope (TEM). This technique sometimes introduces artifacts in specimens contributing to misleading interpretation of TEM results as observed in the present investigation of Al-Li-Cu alloys. This type of alloy, in general, contains several kinds of precipitates, namely delta', T1, and theta'. It is found that ion milling even for a short time produces drastic changes in the precipitate characteristics as compared to standard electropolishing methods of specimen preparation for TEM. Careful analysis of selected area diffraction patterns and micrographs shows that after ion milling delta' precipitates are very irregular, whereas other precipitates coarsen and they are surrounded by misfit dislocations. In situ hot-stage TEM experiments were performed to relate the microstructure to that observed in the ion-milled specimen. Results and causes of ion milling effects on the microstructure are discussed in relation to standard electropolishing techniques and in situ hot-stage experiment.