Design of chemobrionic and biochemobrionic scaffolds for bone tissue engineering.

Chemobrionic systems have attracted great attention in material science for development of novel biomimetic materials. This study aims to design a new bioactive material by integrating biosilica into chemobrionic structure, which will be called biochemobrionic, and to comparatively investigate the use of both chemobrionic and biochemobrionic materials as bone scaffolds. Biosilica, isolated from Amphora sp. diatom, was integrated into chemobrionic structure, and a comprehensive set of analysis was conducted to evaluate their morphological, chemical, mechanical, thermal, and biodegradation properties. Then, the effects of both scaffolds on cell biocompatibility and osteogenic differentiation capacity were assessed. Cells attached to the scaffolds, spread out, and covered the entire surface, indicating the absence of cytotoxicity. Biochemobrionic scaffold exhibited a higher level of mineralization and bone formation than the chemobrionic structure due to the osteogenic activity of biosilica. These results present a comprehensive and pioneering understanding of the potential of (bio)chemobrionics for bone regeneration.

Induction of antioxidant activities of Arthrospira platensis and Chlorella vulgaris by modified culture conditions.

Microalgae are considered a promising source for obtaining natural compounds with strong antioxidant activity. Despite the great progress made in this field, there is still need for further studies applying simple and cost-effective modifications to reveal their full potential and enhance antioxidant properties. Arthrospira platensis and Chlorella vulgaris are some of the most common cells studied for this purpose. In this study, it was aimed to develop a bioprocess for the enhancement of antioxidant properties of these two microalgae by evaluating the effect of different culture conditions. With this aim, the impacts of light intensity/reactive oxygen species and nitrogen sources/reactive oxygen species were evaluated for the A. platensis and C. vulgaris cells, respectively. Results showed that the antioxidant potential of A. platensis was found to be correlated with the phycocyanin and total phenolic content of cells, and 80 µmol photons m-2 s-1 light intensity induced antioxidant activity in a two-step cultivation mode. For C. vulgaris cells, maximum antioxidant activities of 68.10 ± 1.51% and 75.68 ± 0.66% were obtained in cultures with NH4Cl (0.016% (w/v)) for DPPH and ABTS assays, respectively. The applied oxidative stress factors exhibited different effects on the antioxidant activities of the cells because of their cellular morphologies and changing mechanisms of reactive oxygen species. These outcomes show the potential of applied modifications on cells and suggest a promising route to enhance antioxidant activities of microalgae for further research.

Comparative Evaluation of Chemical Garden Growth Techniques.

Chemical gardens are an exciting area of self-organized precipitation structures that form nano- and micro-sized structures in different shapes. This field has attracted great interest from researchers due to the specific characteristics and potential applications of these structures. Today, research on chemical gardens has provided deeper information regarding the formation mechanisms of these structures, and several techniques have been developed for chemical garden growth. However, they all show different growth patterns and lead to the formation of structures with a variety of morphological, chemical, or physical properties. This study aimed to evaluate the effects of different production techniques on chemical garden growth, taking into consideration the growth patterns, morphology, microstructure, and chemical composition. The chemical garden structures obtained in seed and injection experiments, two common methods, showed highly similar surface structures, void formation, and chemical composition. The membrane growth method has a small number of applications; thus, it was comprehensively evaluated to add new insights to the existing limited data. It produced the most stable and standard structures in a flat sheet-like shape and showed different morphologies than those observed in other two methods. Overall, this study presented significant results about the effect of growth techniques on chemical garden structures and similar systems.

Applications and sensory utilizations of magnetic levitation in 3D cell culture for tissue Engineering.

3D cell culture approaches are cell culture methods that provide good visualization of interactions between cells while preserving the natural growth pattern. In recent years, several studies have managed to implement magnetic levitation technology on 3D cell culture applications by either combining cells with magnetic nanoparticles (positive magnetophoresis) or applying a magnetic field directly to the cells in a high-intensity medium (negative magnetophoresis). The positive magnetophoresis technique consists of integrating magnetic nanoparticles into the cells, while the negative magnetophoresis technique consists of levitating the cells without labelling them with magnetic nanoparticles. Magnetic levitation methods can be used to manipulate 3D culture, provide more complex habitats and custom control, or display density data as a sensor.The present review aims to show the advantages, limitations, and promises of magnetic 3D cell culture, along with its application methods, tools, and capabilities as a density sensor. In this context, the promising magnetic levitation technique on 3D cell cultures could be fully utilized in further studies with precise control.

Aligned with sustainable development goals: microwave extraction of astaxanthin from wet algae and selective cytotoxic effect of the extract on lung cancer cells.

Astaxanthin is one of the most attractive carotenoid in the cosmetic, food, pharmaceutical, and aquaculture industries due to its strong bioactive properties. Among the various sources, several algae species are considered as rich sources of astaxanthin. Downstream processing of algae involves the majority of the total processing costs. Thus, elimination of high energy involved steps is imperative to achieve cost-effective scale in industry. This study aimed to determine operation conditions for astaxanthin extraction from wet Haematococcus pluvialis using microwave-assisted extraction. The isolated astaxanthin extract was evaluated for cytotoxicity on human lung cancer cells. The microwave-assisted extraction process at 75 °C under the power of 700 Watt for 7 min gave the highest astaxanthin yield (12.24 ± 0.54 mg astaxanthin/g wet cell weight). Based on MTT cell viability and Hoechst 33342 nuclear staining assays on A549 lung cancer cells, astaxanthin inhibited cell growth in dose- and time-dependent manners, where IC50 value was determined as 111.8 ± 14.8 µg/mL and apoptotic bodies were observed along with positive control group at 72 hr. These results showed that the treatment with astaxanthin extracted from wet H. pluvialis by microwave-assisted extraction exhibited anti-cancer activity on lung cancer cells indicating a newly potential to be utilized in industry.

Development of a Controlled Injection Method Using Support Templates for the Production of Chemobrionic Materials.

Chemobrionics is a research field about the well-known self-organized inorganic structures. Numerous research works have focused on controlling their growth pattern and characteristic features. In the present study, a controlled injection method is proposed to produce more regular self-assembled chemobrionics compared to the standard direct injection technique. This method involves the injection of a metal salt solution into an agarose support template filled with an anionic solution. The obtained structures were studied by scanning electron microscopy, X-ray microtomography, X-ray photoelectron spectroscopy, Raman spectroscopy, Fourier-transform IR spectroscopy, and thermogravimetric analysis. Despite the complex mechanism and chemistry underlying the self-organization phenomena, the controlled injection method enabled the generation of regular standard chemobrionic structures with high experimental reproducibility. It provided the extraction of tubular structures from the reaction vessel without breakage, thus allowing comprehensive characterization. Furthermore, the morphological, chemical, and thermal features of these structures were highly correlated with the standard chemobrionics obtained in the direct injection method. The proposed controlled injection method holds great promise for understanding and controlling the properties of chemobrionics and related structures.

Computational fluid dynamics simulation in scaling-up of airlift photobioreactor for astaxanthin production.

The unicellular green microalga Haematococcus pluvialis accumulates large amounts of the red ketocarotenoid astaxanthin. Aiming to cultivate these microalgae with high astaxanthin efficiency, cultivations were scaled-up from 1000 mL bottle to 2 L and 8 L airlift photobioreactor using volumetric power consumption rate (W/m3) as scale up strategy. After cultivations, computational fluid dynamics (CFD) simulation was used to investigate the flow patterns, mixing efficiency and gas holdup profile within the 2 L photobioreactor. At the end, astaxanthin content was enhanced with increasing the cultivation volume and highest astaxanthin amount of 49.39 ± 1.64 mg/g cell was obtained in 8 L photobioreactor. Hydrodynamic characteristics of photobioreactor was simulated and gas holdup showed difference between the riser and the downcomer regions. Velocity profiles of air and medium had higher values inside the draft tube than obtained in downcomer region. However liquid circulation was achieved from draft tube to the downcomer, mixing was not provided effectively considering the turbulence kinetic energy. For the further research, some developments about column configuration, sparger diameter may be necessary to enhance the mixing characteristics.

Growth Kinetics of Nanofrustulum Shiloi Under Different Mixing Conditions in Flat-plate Photobioreactor

Abstract Diatoms are the major group of microalgae which have been utilized by the potential applications as food industries, aquatic feeds, cosmetics, biofuels, and pharmaceuticals. In this study, current approaches were made in order to determine growth rate, biomass productivity, protein, carbohydrate, lipid and fatty acid composition for Nanofrustulum shiloi cultures using both aeration and mixing conditions in flat-plate photobioreactor (PBR). Physical (the intensity of aeration, mixing, light intensity etc.) and chemical (nutritional materials) factors are affecting the growth and bioproduct contents of a diatom. Biomass and lipid productivities of N. shiloi were measured as 31.29 and 36.9622±0.0598 mg L-1 day-1 in flat-plate PBR having the combination of aeration and stirring system, respectively. A slightly higher amount of saturated fatty acids was detected in PBR having only bubbling system while the increase of mono- and poly- unsaturated fatty acids were found in PBR having the combination of aeration and stirring system. Flat-plate PBR design was also investigated for improving not only biomass but also the lipid productivity of N. shiloi.

Large-scale bioprospecting of cyanobacteria, micro- and macroalgae from the Aegean Sea.

Marine organisms constitute approximately one-half of the total global biodiversity, being rich reservoirs of structurally diverse biofunctional components. The potential of cyanobacteria, micro- and macroalgae as sources of antimicrobial, antitumoral, anti-inflammatory, and anticoagulant compounds has been reported extensively. Nonetheless, biological activities of marine fauna and flora of the Aegean Sea have remained poorly studied when in comparison to other areas of the Mediterranean Sea. In this study, we screened the antimicrobial, antifouling, anti-inflammatory and anticancer potential of in total 98 specimens collected from the Aegean Sea. Ethanol extract of diatom Amphora cf capitellata showed the most promising antimicrobial results against Candida albicans while the extract of diatom Nitzschia communis showed effective results against Gram-positive bacterium, S. aureus. Extracts from the red alga Laurencia papillosa and from three Cystoseira species exhibited selective antiproliferative activity against cancer cell lines and an extract from the brown alga Dilophus fasciola showed the highest anti-inflammatory activity as measured in primary microglial and astrocyte cell cultures as well as by the reduction of proinflammatory cytokines. In summary, our study demonstrates that the Aegean Sea is a rich source of species that possess interesting potential for developing industrial applications.

Simulation design for microalgal protein optimization.

A method for designing the operating parameters (surface light intensity, operating temperature and agitation rate) was proposed for microalgal protein production. Furthermore, quadratic model was established and validated (R(2) > 0.90) with experimental data. It was recorded that temperature and agitation rate were slightly interdependent. The microalgal protein performance could be estimated using the simulated experimental setup and procedure developed in this study. The results also showed a holistic approach for opening a new avenue on simulation design for microalgal protein optimization.

Process optimization and modeling for the cultivation of Nannochloropsis sp. and Tetraselmis striata via response surface methodology.

The aim of this study was to determine the optimal physical process conditions for the cultivation of locally isolated strains of Nannochloropsis sp. and Tetraselmis striata to achieve maximum growth rate. It was essential to evaluate biomass production at different agitation rates, light intensities, and temperature levels. Central composite design and response surface methodology were applied to design the experiments and optimize the cultivation process for Nannochloropsis sp. and T. striata. The specific growth rate of 0.250 d(-1) was obtained for Nannochloropsis sp. cells under the light intensity of 54 µmol photons · m(-2) · s(-1) , at the agitation rate of 151 rpm in 24.5°C. The optimal physical process conditions for T. striata were obtained under the light intensity of 56 µmol photons · m(-2) · s(-1) in 25.5°C at the agitation rate of 151 rpm in 25.5°C, resulting in a specific growth rate of 0.226 d(-1) . The predicted values were justified by the verification tests. Good agreement between the predicted values and the experimental values confirmed the validity of the models for the cultivation of microalgal strains. In this article, the noteworthy result was that temperature was a dominant factor in obtaining high chl-a content for Nannochloropsis sp., whereas the growth of T. striata strongly depended on light exposure.

Regional differences in rice hulls supply for bioethanol production.

Agricultural by-products are becoming an attractive substrate for bioethanol production. The aim of this study was to evaluate the effects of regional differences in the rice hulls using Escherichia coli KO11 for bioethanol production. The rice hulls coded Edirne were obtained from Thrace Region, and the rice hulls coded Izmir were obtained from Aegean Region in Turkey. Rice hulls were treated by dilute acid before using them as substrates. The cells were incubated on an orbital shaker at 160 rpm under 30 °C during 96 h of the fermentation period. It was found that the maximum yield of ethanol from sugar (0.44 g ethanol/g reducing sugar) was obtained with the substrate C/N ratio of 29.16 in Izmir medium. The main difference was the dominant carbon source available as a substrate. It was detected that glucose concentration was about 2.5 times higher in Izmir medium, whereas xylose concentration was about two times higher in Edirne medium. The different results obtained with rice hulls from different origins could depend on the type of paddy as well as different cultivation conditions. These findings provide a valuable indicator for identifying suitable agricultural waste materials to be used as substrates for bioethanol production.

Scale-up and kinetic modeling for bioethanol production.

Bioethanol was produced from acidic hydrolysate of rice hulls using recombinant Escherichia coli KO11. Two different issues (scale-up and kinetic modeling) were evaluated simultaneously and concomitantly for bioethanol production. During the step-wise scale-up process from 100 mL shaken flask to 10 L stirred-tank bioreactor, the constant Reynolds number and the constant impeller tip speed were evaluated as scale-up methodologies under laboratory conditions. It was determined that the volumetric bioethanol productivity was 88% higher in 10 L bioreactor in comparison to the value of 0.21 g L(-1) h(-1) in shaken flask. The modified Monod and Luedeking-Piret models provided an accurate approach for the modeling of the experimental data. Ethanol concentration reached the maximum level of 29.03 g/L, which was 5% higher than the value of model prediction in 10 L bioreactor. The findings of this research could contribute to the industrial scale productions especially from lignocellulosic raw materials.

Semi-continuous cultivation of Haematococcus pluvialis for commercial production.

The objectives of the present study on the growth of Haematococcus pluvialis were to indicate the effects of a long-term semi-continuous cultivation, sterilization, carbon dioxide, and different culture media by using artesian well water. This investigation was an enterprise in order to commercialize the production economically. When the effect of CO(2) was investigated in basal culture medium, the influence of sterilization was also researched in Rudic's culture medium in vertical panel-type photobioreactors for 31 days of semi-continuous cultivation. The maximum cell concentration of 10.55 x 10(5) cells ml(-1), which corresponds to the growth rate of 0.271 day(-1) with the areal productivity of 3.531 g m(-2) day(-1), was found in non-sterilized RM medium on the 24th day of the third run of semi-continuous cultivation at a renewal rate of 50% in a vertical panel-type photobioreactor.

Influences of different stress media and high light intensities on accumulation of astaxanthin in the green alga Haematococcus pluvialis.

Haematococcus pluvialis Flotow is used in the aquaculture, pharmaceutical and cosmetic industries. The aim of this study was to compare the effect of various stress media and high light intensities on astaxanthin accumulation. The experimental design was achieved by four different stress media and two different light intensities for 14 days of induction period. The astaxanthin concentrations of 29.62 mg g(-1) and 30.07 mg g(-1) were obtained in distilled water with CO(2) and N-free medium, respectively, with no significant difference between them at 546 micromol photons m(-2)s(-1). Because of the morphological changes of H. pluvialis, microscopic observation was considered during the induction period to facilitate the selection of stress medium. It was clear that the rate of astaxanthin accumulation was much faster in distilled water with the addition of CO(2). The main point is that, this medium is more economical than others, especially for the large-scale productions.

Agricultural fertilizers as economical alternative for cultivation of Haematococcus pluvialis.

A Haematococcus pluvialis strain isolated from the ruins of Ephesus in Turkey was investigated as regards its adaptation to laboratory conditions and maximum growth rate. In the first stage of the experiment, the growth of H. pluvialis was compared in common culture media. Furthermore, in an effort to minimize the culture costs, the second stage of the experiment compared the growth rate in the culture medium selected in the first stage with that in commercial plant fertilizers. The results demonstrated that the maximum cell concentration of 0.90 g/l, corresponding to a growth rate of 0.150 d(-1), was found with an N-P-K 20:20:20 fertilizer under a light intensity of 75 micromol photons m(-2) s(-1) on the 12th day of cultivation.