Thermal and hydraulic performance of ZnO/EG based nanofluids in mini tubes of different diameters: An experimental investigation.

The present experimental study investigates the thermal and hydraulic performance of Ethylene Glycol (EG)-based ZnO nanofluids (NFs) in circular minichannel test sections, each of 330 mm in length and 1.0-2.0 mm inner diameters. The experiments were conducted under steady-state constant heat flux and laminar flow conditions. The stable ZnO/EG-based NFs were synthesized using a standard two-step method in varying nanoparticles (NPs) loadings (0.012-0.048 wt%). The morphological characteristics, crystal structure, and specific surface area (SSA) showed that the NPs were sized in nm, possessing excellent crystal structure and enhanced surface area. Thermal conductivity (TC) and viscosity (VC) of the NFs were examined in the 20-60 °C temperature range. Both TC and VC possessed an increasing trend with the rise in concentration of the NPs. However, with the temperature rise, TC increased while the VC decreased and vice versa. The highest enhancements in TC and VC were 14.38 % and 15.22 %, respectively, at 40 °C and 0.048 wt% of NPs loading. The highest enrichment recorded in the local and average heat transfer coefficient (HTC) were 14.80 % and 13.48% in a minichannel with 1.0 mm inner diameter, respectively. It was directly proportional to the NPs loading and volume flow rate of the NFs. The friction factor was also directly proportional to the test section's inner cross-sectional area, while the pressure gradient showed an inverse behavior. An inverse relationship was recorded for the volume flow rate of the NFs and vice versa. Maximum friction factor and the pressure drop for all three minichannel test sections were recorded as 34.58 % and 32.16 %, respectively. The well-known Shah correlation predicted the local and average HTC within ±15.0 %, while the friction factor and the pressure gradient were well predicted by the Darcy correlation within the ±10.0 % range.

Evaluating sustainable municipal solid waste management scenarios: A multicriteria decision making approach.

Due to increasing urbanization and population growth, municipal solid waste management (MSWM) is a significant environmental concern in developing countries. Inadequate waste management systems lead to environmental pollution, health hazards, and economic losses. While considering the challenges and limitations, policymakers and authorities need to opt for such waste management scenarios that are environmentally friendly and resolve energy issues. Ten MSWM scenarios were developed and evaluated using seven different criteria. Four multi-criteria decision-making (MCDM) techniques, namely fuzzy logic, AHP, TOPSIS, and PROMETHEE II, were employed to rank the scenarios and identify the most appropriate option for solid waste management in Lahore. This study highlights that the optimal waste management approach comprises a composition of 54% anaerobic digestion, 37% gasification, and 9% landfill technologies. These percentages collectively represent the most suitable and effective strategies for the city's waste management needs. All the MCDM techniques consistently produce similar results. These scenarios have broader applicability across cities in Central Asia and beyond. The study's findings are aligned to promote sustainable and environmentally friendly MSWM practices. These findings endorse implementing strategies and measures aimed at fostering environmental sustainability and the responsible handling of waste, serving as a valuable reference for various regions.

Structural and thermal investigation of lignocellulosic biomass conversion for enhancing sustainable imperative in progressive organic refinery paradigm for waste-to-energy applications.

The depletion of finite fossil fuel reserves and the severe environmental degradation resulting from human activities have compelled the expeditious development and application of sustainable waste to energy technologies. To encapsulate energy and environment in sustainability paradigm, bio waste based energy production is need to be forged in organic bio refinery setup. According to world bioenergy association, biomass can cover 50 % of the primary energy demand of the world. Therefore, the present study focuses on reforming the energy mix for a clean energy generation, where, sample composition of cotton stalk was acidified in dilute (5% wt.) hydrochloric acid (HCL) for analyzing material burnout patterns in biomass conversion systems utilized in organic bio refinery sector. Advanced thermochemical burning technique, which includes pyrolysis and combustion was applied at four different leaching times from 0 to 180 min under nitrogen environment from 0 °C to 500 °C and air from 500 °C to 900 °C, respectively. Different analyses including proximate, ultimate, gross calorific value (GCV), thermos-gravimetric, kinetic, XRD, FTIR, SEM-EDS were used for analyzing the degradation of demineralized cotton stalk at different treatment rates. Proximate study demonstrated that cotton stalk leaching for 180 min has efficiently infused HCL, leading in a significant increase in fixed carbon and higher heating value of 20.23 % and 12.48%, respectively, as well as a reduction in carbon footprint of around 54.80%. The findings of proximate was validated by GCV analysis and CHNS analysis as value of carbon and hydrogen has shown increasing behavior with the time delay in demineralization Thermo-gravimetric and derivative thermo-gravimetric data analyses shows an increasing trend of conversion efficiency, with the maximum increase of 98 % reported for sample 3H.TT.DEM. XRD characterization has reported 23° to 25° angle for all the observed peaks. Sample 3H.TT.DEM has shown maximum angle inclination along with matured crystalline peak. The latter observations has been validated by FTIR spectroscopy as sample 3H.TT.DEM has reported maximum O-H group formation. Sample 3H.TT.DEM has reported lowest activation energy of 139.51 kJ*mole-1 and lowest reactivity of 0.000293649%*min 0C, due to moderate and stable reactiveness. In SEM examination, increment in pore size and number of pores within the structural matrix of cotton stalk was observed with the enhancement in acidulation process. Furthermore, in EDS analysis, 3H.TT.DEM has shown most balanced distribution of the elements. In this research, sustainable transformation of biomass is envisioned to improve the waste bio refinery system, significantly contributing to the achievement of Sustainable Development Goals 7, 12 and 13.

Assessing the potential of GHG emissions for the textile sector: A baseline study.

The carbon footprint (CFP) is a measure of greenhouse gases (GHGs) emitted throughout the lifecycle of a product or activity, while the energy footprint (EFP) and water footprint (WFP) measure energy and water consumption, respectively. These footprints are essential for managing emissions and consumption and promoting low-carbon consumption. A carbon labeling scheme could help consumers make informed choices. Asia is a major textile producer and consumer, so studying textiles' carbon, energy, and water footprints is essential for managing domestic emissions, energy and water consumption, and international trade negotiations. This paper presents a method and framework for assessing CFP, EFP, and WFP at the product level and calculates the footprints for textile products. The results show that the total CFP of all textile products produced is 42,624.12 MT CO2e, with indirect emissions contributing significantly more than direct emissions. The total EFP is 248.38 PJ, with electricity consumption being the main contributor, while the total WFP is 80.71 billion liters. The spinning stage of production has the highest CFP and EFP, and energy consumption is the main contributor to all footprints. These results can help compare different products and reduce the footprints of the textile sector.

A comprehensive study on the performance and emission analysis in diesel engine via optimization of novel ternary fuel blends: Diesel, manganese, and diethyl ether.

Ecosystem degradation and fossil fuel depletion are the two foremost concerns to look for alternative fuels. Rapid population growth is primarily accountable for higher consumption of fossil fuel sources, although engine technology is achieving milestones in terms of fuel efficiency and lower exhaust emissions in order to contribute towards a sustainable environment. The main root cause of global warming is carbon dioxide emissions; therefore, it is imperative to assess the impact of alternative fuels in diesel engines with an aim to minimize carbon emissions. A current study deals with the reduction of carbon emissions and improvement of efficiency through addition of manganese nano-additive to di-ethyl ether and diesel fuel blend in particulate form. Fuel blends were formed by adding various proportions of manganese to high-speed diesel fuel and stirring the mixture while heating it for 10 min. The blends were then tested in diesel engines at two distinct loads and five engine speed ranges. Emission analyzer was used to ascertain the CO2 output of engine. At higher loads for 10 % diethyl ether in diesel, the increase in brake thermal efficiency was 24.19, 28.17 and 26.86 % when the manganese amount in blend was changed as 250 mg, 375 mg and 500 mg respectively. On the other side CO2 emissions increase by 11.57, 30.52 and 20.33 % for manganese concentrations of 250 mg, 375 mg and 500 mg respectively. Analysis performed with Design Expert 13 showed that the desirability was 0.796 for a blend of 375 mg manganese at 1300 rpm and 4500 W load with 33.0611 % BTE, 334.011kg/kWh BSFC, 67.8821Nm torque, and 6.072 % CO2. Therefore, it can be deduced that manganese nanoparticle blends improved engine performance but CO2 emissions also increase which can be responsible for global warming and it should be reduced through catalytic converters.

Acute thrombotic occlusion involving three coronary arteries. A unique association with COVID-19 pneumonia.

Key Clinical Message: Respiratory viruses, particularly COVID-19, can be associated with severe cases of myocardial infarction (MI). Physicians should have a low threshold for MI in COVID-19 patients who present with persistent chest pain as MI in rapidly deteriorating cases can be missed. Prompt response includes both timely diagnosis and swift treatment. Abstract: The coronavirus disease 2019 (COVID-19) is associated with coronary artery thrombosis. Many cases of single-vessel and few cases of two-vessel thrombosis were reported. Herein, we report a unique association in a middle-aged man diagnosed with COVID-19 and presented later with acute myocardial infarction causing cardiogenic shock. The patient was found to have three-vessel thrombosis.

In vitro inhibitory analysis of consensus siRNAs against NS3 gene of hepatitis C virus 1a genotype

Objective To explore inhibitory effects of genome-specific, chemically synthesized siRNAs (small interference RNA) against NS3 gene of hepatitis C virus (HCV) 1a genotype in stable Huh-7 (human hepatoma) cells as well as against viral replication in serum-inoculated Huh-7 cells. Methods Stable Huh-7 cells persistently expressing NS3 gene were produced under antibiotic gentamycin (G418) selection. The cell clones resistant to 1 000 μg antibiotic concentration (G418) were picked as stable cell clones. The NS3 gene expression in stable cell clone was confirmed by RT-PCR and Western blotting. siRNA cell cytotoxicity was determined by MTT cell proliferation assay. Stable cell lines were transfected with sequence specific siRNAs and their inhibitory effects were determined by RT-PCR, real-time PCR and Western blotting. The viral replication inhibition by siRNAs in serum inoculated Huh-7 cells was determined by real-time PCR. Results RT-PCR and Western blot analysis confirmed NS3 gene and protein expression in stable cell lines on day 10, 20 and 30 post transfection. MTT cell proliferation assay revealed that at most concentrated dose tested (50 nmol/L), siRNA had no cytotoxic effects on Huh-7 cells and cell proliferation remained unaffected. As demonstrated by the siRNA time-dependent inhibitory analysis, siRNA NS3-is44 showed maximum inhibition of NS3 gene in stable Huh-7 cell clones at 24 (80%, P = 0.013) and 48 h (75%, P = 0.002) post transfection. The impact of siRNAs on virus replication in serum inoculated Huh-7 cells also demonstrated significant decrease in viral copy number, where siRNA NS3-is44 exhibited 70% (P < 0.05) viral RNA reduction as compared to NS3-is33, which showed a 64% (P < 0.05) decrease in viral copy number. siRNA synergism (NS3-is33 + NS3-is44) decreased viral load by 84% (P < 0.05) as compared to individual inhibition by each siRNA (i.e., 64%–70% (P < 0.05)) in serum-inoculated cells. Synthetic siRNAs mixture (NS5B-is88 + NS3-is33) targeting different region of HCV genome (NS5B and NS3) also decreased HCV viral load by 85% (P < 0.05) as compared to siRNA inhibitory effects alone (70% and 64% respectively, P < 0.05). Conclusions siRNAs directed against NS3 gene significantly decreased mRNA and protein expression in stable cell clones. Viral replication was also vividly decreased in serum infected Huh-7 cells. Stable Huh-7 cells expressing NS3 gene is helpful to develop anti-hepatitis C drug screening assays. siRNA therapeutic potential along with other anti-HCV agents can be considered against hepatitis C.

In vitro inhibitory analysis of consensus siRNAs against NS3 gene of hepatitis C virus 1a genotype

OBJECTIVE@#To explore inhibitory effects of genome-specific, chemically synthesized siRNAs (small interference RNA) against NS3 gene of hepatitis C virus (HCV) 1a genotype in stable Huh-7 (human hepatoma) cells as well as against viral replication in serum-inoculated Huh-7 cells.@*METHODS@#Stable Huh-7 cells persistently expressing NS3 gene were produced under antibiotic gentamycin (G418) selection. The cell clones resistant to 1000 μg antibiotic concentration (G418) were picked as stable cell clones. The NS3 gene expression in stable cell clone was confirmed by RT-PCR and Western blotting. siRNA cell cytotoxicity was determined by MTT cell proliferation assay. Stable cell lines were transfected with sequence specific siRNAs and their inhibitory effects were determined by RT-PCR, real-time PCR and Western blotting. The viral replication inhibition by siRNAs in serum inoculated Huh-7 cells was determined by real-time PCR.@*RESULTS@#RT-PCR and Western blot analysis confirmed NS3 gene and protein expression in stable cell lines on day 10, 20 and 30 post transfection. MTT cell proliferation assay revealed that at most concentrated dose tested (50 nmol/L), siRNA had no cytotoxic effects on Huh-7 cells and cell proliferation remained unaffected. As demonstrated by the siRNA time-dependent inhibitory analysis, siRNA NS3-is44 showed maximum inhibition of NS3 gene in stable Huh-7 cell clones at 24 (80%, P = 0.013) and 48 h (75%, P = 0.002) post transfection. The impact of siRNAs on virus replication in serum inoculated Huh-7 cells also demonstrated significant decrease in viral copy number, where siRNA NS3-is44 exhibited 70% (P < 0.05) viral RNA reduction as compared to NS3-is33, which showed a 64% (P < 0.05) decrease in viral copy number. siRNA synergism (NS3-is33 + NS3-is44) decreased viral load by 84% (P < 0.05) as compared to individual inhibition by each siRNA (i.e., 64%-70% (P < 0.05)) in serum-inoculated cells. Synthetic siRNAs mixture (NS5B-is88 + NS3-is33) targeting different region of HCV genome (NS5B and NS3) also decreased HCV viral load by 85% (P < 0.05) as compared to siRNA inhibitory effects alone (70% and 64% respectively, P < 0.05).@*CONCLUSIONS@#siRNAs directed against NS3 gene significantly decreased mRNA and protein expression in stable cell clones. Viral replication was also vividly decreased in serum infected Huh-7 cells. Stable Huh-7 cells expressing NS3 gene is helpful to develop anti-hepatitis C drug screening assays. siRNA therapeutic potential along with other anti-HCV agents can be considered against hepatitis C.

Assessing the Reliability of Digitalized Cephalometric Analysis in Comparison with Manual Cephalometric Analysis.

INTRODUCTION: For more than seven decades orthodontist used cephalometric analysis as one of the main diagnostic tools which can be performed manually or by software. The use of computers in treatment planning is expected to avoid errors and make it less time consuming with effective evaluation and high reproducibility. AIM: This study was done to evaluate and compare the accuracy and reliability of cephalometric measurements between computerized method of direct digital radiographs and conventional tracing. MATERIALS AND METHODS: Digital and conventional hand tracing cephalometric analysis of 50 patients were done. Thirty anatomical landmarks were defined on each radiograph by a single investi-gator, 5 skeletal analysis (Steiner, Wits, Tweeds, McNamara, Rakosi Jarabaks) and 28 variables were calculated. RESULTS: The variables showed consistency between the two methods except for 1-NA, Y-axis and interincisal angle measurements which were higher in manual tracing and higher facial axis angle in digital tracing. CONCLUSION: Most of the commonly used measurements were accurate except some measurements between the digital tracing with FACAD® and manual methods. The advantages of digital imaging such as enhancement, transmission, archiving and low radiation dosages makes it to be preferred over conventional method in daily use.

Clinicopathologic Correlation of White, Non scrapable Oral Mucosal Surface Lesions: A Study of 100 Cases.

INTRODUCTION: White, non scrapable lesions are commonly seen in the oral cavity. Based on their history and clinical appearance, most of these lesions can be easily diagnosed, but sometimes diagnosis may go wrong. In order to arrive to a confirmative diagnosis, histopathological assessment is needed in many cases, if not all. AIMS: 1) To find out the prevalence of clinically diagnosed oral white, non scrapable lesions. 2) To find out the prevalence of histopathologically diagnosed oral white, non scrapable lesions. 3) To correlate the clinical and histopathological diagnosis in the above lesions. MATERIALS AND METHODS: A total of 100 cases of oral white, non scrapable lesions were included in the study. Based on their history and clinical presentation, clinical provisional diagnosis was made. Then biopsy was done and confirmatory histopathological diagnosis was given and both were correlated. In order to correlate clinical and histopathological diagnosis Discrepancy Index (DI) was calculated for all the cases. RESULTS: Based on clinical diagnosis, there were 59 cases (59%) of leukoplakia, 29 cases (29%) of lichen planus and six cases (6%) of lichenoid reaction; whereas, based on histopathological diagnosis, there were 66 cases (66%) of leukoplakia epithelial hyperplasia and hyperkeratosis (leukoplakia) and 30 cases (30%) of lichen planus. Seventy eight clinically diagnosed cases (78%) correlated with the histopathological diagnosis and 22 cases (22%) did not correlate. The total discrepancy index was 22%. CONCLUSION: A clinician needs to be aware of oral white, non scrapable lesions. Due to the overlapping of many clinical features in some of these lesions and also due to their malignant potential, a histopathological confirmative diagnosis is recommended.