Further treatment of coking wastewater treated in A2O-MBR by the nanofiltration-powder activated carbon hybrid system.

In this study, further treatment of coking wastewater treated in anoxic-oxic-membrane bioreactor (A2O-MBR) was investigated to meet the standards of the ministry by means of nanofiltration (NF) (with two different membranes and different pressures), microfiltration -powder activated carbon (MF-PAC) hybrid system and NF-PAC (with two different membranes and five different PAC concentrations) hybrid system. In addition to the parameters determined by the ministry, other parameters such as ammonium, thiocyanate (SCN-), hydrogen cyanide (HCN), dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), color were also examined to evaluate the flux performance and treatment efficiency of the hybrid processes. According to the results, chemical oxygen demand (COD) in the NF process, COD and total cyanide (T-CN) in the MF-PAC process could not meet the discharge standards. As for the NF-PAC hybrid system, XN45 membrane met the discharge standards in all parameters (COD = 96±1.88 mg/L, T-CN =<0,02 mg/L, phenol =<0.05 mg/L), with a recovery rate of 78% at 0.5 g/L PAC concentration.

Prioritization of the treatment and disposal methods of wastes containing polychlorinated biphenyl by fuzzy multi-criteria decision-making and risk assessment.

A total of 209 different types of polychlorinated biphenyls (PCBs) with various properties have been produced from 1930 to 1970s in which they have been banned due to their toxic effects. Total produced PCBs in the world are around 15 to 20 million tons, and up to now, 5.4 million tons of PCB-containing or PCB-contaminated equipment/materials has been eliminated. The remaining 10-15 million tons still needs to be removed or managed. Moreover, PCBs are pollutants still being unintentionally formed. These pollutants can be treated or disposed of various methods. However, there is a lack of knowledge about the selection of the treatment and disposal methods and their environmental, technological, cost, and social/ergonomic evaluation perspectives and the risk assessment during method selection. In this study, a projection was presented for the management of PCBs with an integrated multi-criteria decision-making (MCDM)-risk analysis focusing on these questions. Treatment (physical, chemical, biological) and disposal (incineration, landfill, supercritical water oxidation/gasification (SCWO/G), and pyrolysis/gasification) methods for the management of PCB-containing waste have been prioritized by fuzzy-analytical hierarchy process (F-AHP) in terms of environmental, technology, cost, and social/ergonomic criteria. Risk analysis was also made in terms of these criteria for considered alternatives, and compliance with risk and MCDM was evaluated. As a result of the study, priority methods among alternatives were determined as chemical treatment and SCWO/G. It has been determined that the weight values of the main criteria of environmental, technology, cost, and social/ergonomics were close to each other, but the emission criterion of the sub-criteria was determined to be of higher priority. In the risk analysis, chemical treatment and SCWO/G methods have been found to carry a more acceptable risk. Thus, it has been evaluated that these methods provide more superiority than other methods.

Effect of carbon to nitrogen ratio of feed wastewater and sludge retention time on activated sludge in a submerged membrane bioreactor.

This paper investigated the effects of extracellular polymeric substances (EPS) on the activated sludge rheology in a submerged membrane bioreactor (sMBR) operated at different sludge retention time (SRT) values and different carbon to nitrogen ratios (C/N) of feed wastewater. The C/N ratios of the feed were adjusted accordingly so that synthetic wastewaters prepared simulated municipal wastewater, non-toxic wastewater with high C/N ratio and non-toxic wastewater with low C/N ratio. A number of important operational parameters such as mixed liquor suspended solid (MLSS), protein fraction of EPS (EPSp), carbohydrate fraction of EPS (EPSc), protein fraction of soluble microbial product (SMPp), carbohydrate fraction of SMP (SMPc), apparent viscosity, critical flux and hydrophobicity in mixed liquor and their correlations were investigated in the sMBR systems operated. The statistical analysis indicated that the C/N ratio of feed, SRT, MLSS and SMPc were found to have positive effects on apparent viscosity at three different shear rates. On the other hand, a negative impact was detected between the apparent viscosities and the critical fluxes. It was also observed that there is a significant positive correlation between hydrophobicity and both EPSp and SMPp.

The effect of shock loading on the performance of a thermophilic anaerobic contact reactor at constant organic loading rate.

The influences of organic loading disturbances on the process performance of a thermophilic anaerobic contact reactor treating potato-processing wastewater were investigated. For this purpose, while the reactor was operated at steady state conditions with organic loading rate of 5.5 kg COD/m(3) · day, an instant acetate concentration increase (1 g/L) was introduced to the reactor. During the shock loading test of acetate, it was observed that the overall process performance was adversely affected by all the shock loading, however, the system reached steady state conditions less than 24 hours of operation indicating that thermophilic anaerobic contact reactor is resistant to shock loading and be capable of returning its normal conditions within a short time period.

The effect of transient loading on the performance of a mesophilic anaerobic contact reactor at constant feed strength.

Anaerobic contact reactor is a high rate anaerobic process consisting of an agitated reactor and a solids settling tank for recycling. It was proved earlier that this type of reactor design offers highly efficient performance in the conversion of organic matter to biogas. In this study, the effect of transient loading on reactor performance in terms of a number of key intermediates and parameters such as, COD removal, pH and alkalinity change, VFAs, effluent MLSS concentration and biogas efficiency over time was examined. For this purpose, a step increase of organic loading rate from 3.35kg COD/m(3)day to 15.61kg COD/m(3)day was employed. The hydraulic retention time decreased to a value of 8.42h by an increase in the influent flow-rate during the transient loading. It was observed that the mesophilic anaerobic contact reactor (MACR) was quite resistant to large transient shocks. The reactor recovered back to its baseline performance only in 15h after the shock loading was stopped. Hence, it can be concluded that this type of reactor design has a high potential in treating food processing wastewaters with varying flow characteristics.

Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array.

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.

Metal concentrations of simulated aerobic and anaerobic pilot scale landfill reactors.

Leachate and solid waste samples from aerobic and anaerobic simulated landfill reactors operated with and without leachate recirculation were characterized in terms of metals such as Fe, Ca, K, Na, Cd, Cr, Cu, Pb, Ni, and Zn. Metal concentrations of aerobic landfill reactor leachate samples are always below the regulation limits. The higher concentrations in anaerobic landfill leachate samples decreased to regulation limits after the landfill becomes methanogenic. The effect of leachate recirculation is determined in anaerobic landfills more clearly than aerobic landfills. Metal precipitation resulted in a decrease in leachate metal content and an increase in solid waste metal content as expected. Result of the study show that the metal content of landfill leachate samples is not a major concern for both aerobic and anaerobic landfills.

Leaching of silver from solid waste using ultrasound assisted thiourea method.

Thiourea leaching of precious metals such as gold and silver from ores has several advantages when compared with conventional cyanidation process. In recent years, the use of ultrasound in leaching processes is becoming increasingly popular in hydrometallurgy. This paper deals with combining these two techniques for silver leaching from solid waste of a cyanidation leach plant located in Kutahya, Turkey. The primary aim of this research is to assess the technical performance of the method. To achieve maximum leaching yield, eight process variables have been selected to estimate optimum process conditions by means of statistical factorial design and steepest ascent techniques. Laboratory-scale experiments showed that complete leaching of silver may be achieved by this process.