Vegetable By-Products as Alternative and Sustainable Raw Materials for Ruminant Feeding: Nutritive Evaluation and Their Inclusion in a Novel Ration for Calf Fattening.

This research aimed to evaluate the nutritional composition, in vitro digestibility, and gas production kinetics of 15 vegetable by-products generated by the agri-food industry compared with corn silage as a reference raw material. Nutritional characterization and in vitro ruminal fermentation tests were performed to determine in vitro organic matter digestibility and digestible energy values, short-chain fatty acids, and the gas production profile. Results indicate that vegetable by-products were more degradable, more extensively fermented, and fermented at a faster rate than corn silage. Going one step further in the valorization of these by-products in animal feed, the second part of the research aimed to compare the novel ration designed for calf fattening with a conventional one. An artificial rumen unit was used to obtain nutrient disappearance, rumen fermentation parameters, and gas production of rumen digesta. Very slight differences were observed between both experimental rations, with their composition being the main difference. Most of the unitary vegetable by-products and all mixes, as real examples of by-product generation in the agri-food industry, have higher digestibility and a greater nutritional value than corn silage. These by-products showed the potential to be used in ruminant-ensiled rations and could replace part of the ingredients in conventional diets.

Evaluation of growth, meat quality, and sensory characteristics of wool, hair, and composite lambs.

The objectives of this study were to evaluate the growth rates, carcass quality, shelf-life, tenderness, sensory characteristics, volatile compounds, and fatty acid composition of wool, hair, and composite (wool × hair) lambs. Twenty-one wether lambs [wool (Suffolk × Polypay/Targhee; n = 7), hair (Dorper × Dorper; n = 7), and composite (Dorper × Polypay/Targhee; n = 7)] were fed from weaning to finishing at the University of Idaho Sheep Center and subsequently harvested under United States Department of Agriculture inspection at the University of Idaho Meat Lab. At 48 h postmortem, carcass measurements were taken to determine the percent boneless closely trimmed retail cuts, yield grade, and quality grade. Loins were fabricated from each carcass and wet-aged at 0°C until 10-d postmortem. Following aging, 2.54-cm bone-in loin chops were cut and randomly assigned to 4 d of retail display, Warner-Bratzler Shear Force (WBSF), or sensory analyses. Thiobarbituric acid reactive substances were analyzed on days 0 and 4 of retail display while subjective and objective color measurements were observed once daily. Samples (24 g) were also collected for volatile compound and fatty acid analysis. A mixed model analysis of variance was used to assess breed differences. Discernable effects were considered at P < 0.05. Wool lambs had heavier hot carcass weights (P < 0.001), larger rib-eye area (P = 0.015), and higher dressing percent (P < 0.001) than the other breeds. There was an interaction observed between breed and days of retail display for browning (P = 0.006). On day 1 chops from the composite breed had more browning than chops from the wool breed. No differences were observed between groups for lean muscle L* values (P = 0.432), a* values (P = 0.757), and b* values (P = 0.615). Differences were not observed in lipid oxidation (P = 0.159), WBSF (P = 0.540), or consumer acceptability (P = 0.295). There were differences found for 7 of the 45 fatty acids detected and in 3 of the 67 volatile compounds detected. In conclusion, wool lambs were heavier and had a greater carcass yield than the hair lamb carcasses. Regardless of breed, consumers did not detect sensory traits that would impact their eating experience.

The U.S. lamb industry has been steadily losing production operations since the 1990s due to a decline in lamb consumption, caused by consumer flavor preferences, an increase in synthetic fabrics, and importation from Australia and New Zealand. This has limited the overall need for U.S. producers. The focus of this research was to evaluate the differences among wool, hair, and composite groups of lamb for growth traits, carcass characteristics, shelf-life stability, consumer flavor, volatile compounds, and fatty acid profiling. The study found the wool group maintained a higher overall weight, as well as a taller shoulder height, and heart girth circumference over the hair group. The wool group also had a superior final carcass size; however, the quality grade did not differ between the composite and wool groups. There was no difference between groups for consumer sensory levels or cook loss. Minimal variation was shown throughout the retail shelf-life; however, general discoloration increased as expected during retail display. Tenderness levels between groups were also similar. Volatile compounds showed differences for three compounds with variation between groups. Fatty acid analysis also determined seven compounds of interest; however, common fatty acids known to be flavor factors were not different between groups.

Tenderness of PGI "Ternera de Navarra" Beef Samples Determined by FTIR-MIR Spectroscopy.

Understanding meat quality attribute changes during ageing by using non-destructive techniques is an emergent pursuit in the agroindustry research field. Using beef certified samples from the protected geographical indication (PGI) "Ternera de Navarra", the primary goal of this study was to use Fourier transform infrared spectroscopy on the middle infrared region (FTIR-MIR) as a tool for the examination of meat tenderness evolution throughout ageing. Samples of the longissimus dorsi muscle of twenty young bulls were aged for 4, 6, 11, or 18 days at 4 °C. Animal carcass classification and sample proximate analysis were performed to check sample homogeneity. Raw aged steaks were analyzed by FTIR-MIR spectroscopy (4000-400 cm-1) to record the vibrational spectrum. Texture profile analysis was performed using a multiple compression test (compression rates of 20%, 80%, and 100%). Compression values were found to decrease notably between the fourth and sixth day of ageing for the three compression rates studied. This tendency continued until the 18th day for C20. For C80 and C100, there was not a clear change in the 11th and 18th days of the study. Regarding FTIR-MIR as a prediction method, it achieved an R2 lower than 40%. Using principal component analysis (PCA) of the results, the whole spectrum fingerprint was used in the discrimination of the starting and final ageing days with correct maturing time classifications. Combining the PCA treatment together with the discriminant analysis of spectral data allowed us to differentiate the samples between the initial and the final ageing points, but it did not single out the intermediate points.

Classification of Beef longissimus thoracis Muscle Tenderness Using Hyperspectral Imaging and Chemometrics.

Nowadays, the meat industry requires non-destructive, sustainable, and rapid methods that can provide objective and accurate quality assessment with little human intervention. Therefore, the present research aimed to create a model that can classify beef samples from longissimus thoracis muscle according to their tenderness degree based on hyperspectral imaging (HSI). In order to obtain different textures, two main strategies were used: (a) aging type (wet and dry aging with or without starters) and (b) aging times (0, 7, 13, 21, and 27 days). Categorization into two groups was carried out for further chemometric analysis, encompassing group 1 (ngroup1 = 30) with samples with WBSF ˂ 53 N whereas group 2 (ngroup2 = 28) comprised samples with WBSF values ≥ 53 N. Then, classification models were created by applying the partial least squares discriminant analysis (PLS-DA) method. The best results were achieved by combining the following pre-processing algorithms: 1st derivative + mean center, reaching 70.83% of correctly classified (CC) samples and 67.14% for cross validation (CV) and prediction, respectively. In general, it can be concluded that HSI technology combined with chemometrics has the potential to differentiate and classify meat samples according to their textural characteristics.

Predicting Beef Carcass Fatness Using an Image Analysis System.

The amount and distribution of subcutaneous fat is an important factor affecting beef carcass quality. The degree of fatness is determined by visual assessments scored on a scale of five fatness levels (the SEUROP system). New technologies such as the image analysis method have been developed and applied in an effort to enhance the accuracy and objectivity of this classification system. In this study, 50 young bulls were slaughtered (570 ± 52.5 kg) and after slaughter the carcasses were weighed (360 ± 33.1 kg) and a SEUROP system fatness score assigned. A digital picture of the outer surface of the left side of the carcass was taken and the area of fat cover (fat area) was measured using an image analysis system. Commercial cutting of the carcasses was performed 24 h post-mortem. The fat trimmed away on cutting (cutting fat) was weighed. A regression analysis was carried out for the carcass cutting fat (y-axis) on the carcass fat area (x-axis) to establish the accuracy of the image analysis system. A greater accuracy was obtained by the image analysis (R2 = 0.72; p < 0.001) than from the visual fatness scores (R2 = 0.66; p < 0.001). These results show the image analysis to be more accurate than the visual assessment system for predicting beef carcass fatness.

Physicochemical and Sensory Assessments in Spain and United States of PGI-Certified Ternera de Navarra vs. Certified Angus Beef.

The physicochemical and sensory differences between the PGI-Certified Ternera de Navarra (CTNA) (Spanish origin) and Certified Angus Beef (CAB) (US origin) were assessed in Spain and the USA. To characterize the carcasses, the ribeye areas (REAs), and marbling levels were assessed in both testing places. Twenty striploins per certified beef program were used as study samples. For sensory analysis, the striploins were vacuum packaged and aged for 7 days at 4 °C and 85% RH in each corresponding laboratory. Thereafter, the samples were half cut and frozen. One of the halves was shipped to the other counterpart-testing place. The fat and moisture percentage content, Warner Bratzler Shear Force (WBSF), and total and soluble collagen were tested for all the samples. The CAB carcasses had smaller REAs (p < 0.0001) and exhibited higher marbling levels (p < 0.0001). The CAB striploins had a higher fat content (p < 0.0001) and required lower WBSF (p < 0.05) than the CTNA samples. Trained panelists rated the CAB samples as juicer (p < 0.001), more tender/less tough (p < 0.0001), and more flavorful (p < 0.0001) than the CTNA counterparts. This study shows that beef from both countries had medium-high tenderness, juiciness, and beef flavor scores and very low off-flavor scores. Relevant differences found between the ratings assigned by the Spanish and the US panelists suggest training differences, or difficulties encountered in using the appropriate terminology for defining each sensory attribute. Furthermore, the lack of product knowledge (i.e., consumption habits) may have been another reason for such differences, despite the blind sensory evaluation.

Muscle and Subcutaneous Fatty Acid Composition and the Evaluation of Ageing Time on Meat Quality Parameters of Hispano-Bretón Horse Breed.

A full-randomized block design was used for the study of the FA composition and meat quality parameters, considering ageing time as a split-plot factor. Chemical and fatty acid composition of steaks (longissimus thoracis and lumborum muscle) from 15 month old semiextensively reared Hispano-Bretón horses were characterized (day 0), and the effect of vacuum ageing (0, 7, 14 and 21 days) on several meat quality parameters (pH, instrumental color and texture and cook loss) was determined. The average fat content of horse loin was 3.31%, and the n-3 polyunsaturated fatty acid content, although higher than in ruminant meats, suggested that the finishing on a high-grain diet limited muscle n-3 accumulation. Results revealed that ageing affected all meat quality measurements; color started to turn brownish at 14 days of ageing, with a decrease in redness but not in yellowness. Tenderness improved during the first two weeks, and the Warner-Bratzler shear force scores showed that meat aged for 7 days could be considered as 'intermediate tender'. Under the present study conditions, an ageing period between 7 and 14 days is recommended for an optimum horse meat quality.

Volatile Compounds, Odour and Flavour Attributes of Lamb Meat from the Navarra Breed as Affected by Ageing.

This study aimed to assess the influence of ageing on the volatile compounds, as well as odour and flavour attributes of lamb meat from the Navarra breed. Twenty-one male lambs were fed a commercial concentrate diet after weaning and were harvested at 101 ± 6.5 days of age. From the Longissimus thoracis, 26 volatile compounds were identified, with hexanal, 2-propanone, and nonanal the most abundant (57.17% relative percentage abundance, RPA). The effect of ageing (1 vs. 4 d) was observed (p < 0.05) in six compounds: 1,4-dimethylbenzene decreased with ageing, while tridecane, 3-methylbutanal, 2-heptanone, 3-octanone, and 1-octen-3-ol increased. In general, ageing was linked to a decrease in livery and bloody flavour, bloody odour and ethanal, and an increase in pentane, hexanal, and heptanal, which are usually associated with fresh green grass and fat descriptors. Consequently, ageing lamb from the Navarra breed for four days might have a positive effect on meat sensory odour and flavour quality.

Lipid and Protein Oxidation Marker Compounds in Horse Meat Determined by MIR Spectroscopy.

This work broadens the study of lipid and protein oxidation marker compounds in foal meat, employing the technology of Attenuated Total Reflectance-Fourier Transform Mid-Infrared Spectroscopy (ATR-FT/MIR, shortened in the following as MIR). As a main objective, marker compounds from 23 foals were extracted and their absorbance spectra were measured to establish prediction models (calibration and validation) between them and classical quantification analysis of the compounds. Another objective was to ascertain whether a previous extraction of the marker compounds before executing their MIR analysis is preferable compared to direct MIR measurements on the raw meat samples. In this context, marker compound results (TBARS between 0.4387 and 2.1040, and carbonyls between 4.07 and 4.68) showed more consistent predictive models than the ones achieved using quantitative analysis of the spectra obtained from the raw meat. Lipid oxidation compounds predictive models obtained in this work offered an R2cv of 63.18% and protein oxidation R2cv obtained in this project showed a value of 54.24%. Thus, MIR technology arises as a promising tool to identify and quantify products derived from lipid and protein oxidation in fresh foal meat.

Raw-Cured Spanish Traditional Meat Product "Chistorra de Navarra": Sensory and Composition Quality Standards.

The aim of this work was to set the quality standards of the chistorra de Navarra, a raw-cured Spanish traditional meat product, through the study of its sensory and physicochemical features. The quality of chistorra samples, coming from 50 different artisan producers, were assessed during three sessions by expert assessors (n = 15). In the first session, instrumental colour (L*, a*, and b*) and appearance and odour parameters were evaluated in the raw products. In the second session, texture and flavour attributes were determined in cooked products. Finally, in the third session, the best 10 classified chistorras from the first and second sessions were sensorially evaluated and sampled for further analysis: texture (Warner Bratzler and texture profile analysis (TPA)), chemical composition, and fatty acid profile. The chistorras with the highest sensory scores had high shear force values, flavour intensity, and fat/hydroxyproline ratio. The average fatty acid profile obtained for chistorra de Navarra was: 42% saturated fatty acids (SFA), 45% monounsaturated fatty acids (MUFA), and 13% polyunsaturated fatty acids (PUFA), which was similar to the one found in other raw-cured sausages. Considering the sensory evaluation, chistorra was defined as a product with an intense orange colour, and with high resistance value in the initial bite. It was also characterised by a high juiciness and tenderness, aroma, and meat flavour. In mouth, the pork fat, one of the ingredients of chistorra, was balanced without any of the ingredients dominating. Chemically, the chistorra was characterised by a fat content close to 67% (dry matter), low hydroxyproline occurrence (≤0.6), and protein amount ranging 18-38%.

Assessing outcomes of genetic selection panels to predict marbling in crossbred beef cattle.

The objective of this study was to evaluate the effectiveness of genetic panel marbling indexes [Igenity (IT) and PredicGEN (PG)] to predict marbling and tenderness of crossbred cattle. Steers (n = 23) were harvested at the University of Idaho Meat Science Laboratory, and blood samples were submitted to Neogen and Zoetis for genetic panel analysis. Forty-eight hours postharvest, one boneless strip loin was collected from each carcass, and six 2.54-cm thick steaks were cut from each strip loin. Steaks were aged for 14 and 21 d and assigned to consumer sensory evaluation or Warner-Bratzler Shear Force (WBSF) analysis. Results were analyzed using the Mixed Model procedure of the Statistical Analysis System (SAS Institute, Inc., Cary, NC). Carcasses were grouped by marbling index score into Low IT (IT indexes 3-6; n = 16; marbling score (MS) = 410), High IT (IT indexes 7-10; n = 7; MS = 496), Low PG (PG index <50; n = 9; MS = 398), or High PG (PG index ≥50; n = 14; MS = 458). Mean MS was observed to be greater in High IT steaks than Low IT (P < 0.01) and greater in High PG steaks than Low PG (P = 0.01). There was a trend observed in WBSF between IT marbling groups (P = 0.06); however, no difference in WBSF was observed between PG marbling groups (P = 0.83). Consumers did not report differences between IT marbling groups in terms of acceptability (P = 0.99) or tenderness (P = 0.24). Additionally, consumers could not detect differences between PG marbling groups in terms of acceptability (P = 0.75) or tenderness (P = 0.40). Consumers consistently preferred Choice steaks over Select steaks in terms of acceptability (P = 0.02) and tenderness (P = 0.02). In conclusion, though consumers were not able to tell the difference between steaks from each of the genetic panels, using genetic panels to predict marbling, in conjunction with proper nutrition and handling practices, could be a beneficial tool to producers making decisions about retaining ownership at the feedlot.

Application of MIR Spectroscopy to the Evaluation of Chemical Composition and Quality Parameters of Foal Meat: A Preliminary Study.

The aim of this work was to evaluate the potential of mid-infrared spectroscopy to evaluate the chemical composition and quality parameters of foal meat according to differences based on slaughter ages and finishing diets. In addition, the wavelength ranges which contribute to this meat quality differentiation were also determined. Important characteristics as moisture and total lipid content were well predicted using Mid-Infrared Spectroscopy (MIR)with Rv2 values of 82% and 66%, respectively. Regarding fatty acids, the best models were obtained for arachidonic, vaccenic, docosapentaenoic acid (DPA), and docosahexaenoic acid (DHA) with Rv2 values over 65%. Quality parameters, as instrumental colour and texture and sensory attributes did not reach high prediction coefficients (R2). With the spectra data of the region 2198-1118 cm-1, samples were accurately classified according to slaughter age (78%) and finishing diet (72%). This preliminary research shows the potential of MIR spectroscopy as an alternative tool to traditional meat chemical composition methods. Finally, the wavelength range of the spectrum from 2198 to 1118 cm-1 showed good results for classification purposes.

Adipose Tissue Modification through Feeding Strategies and Their Implication on Adipogenesis and Adipose Tissue Metabolism in Ruminants.

Dietary recommendations by health authorities have been advising of the importance of diminishing saturated fatty acids (SFA) consumption and replacing them by polyunsaturated fatty acids (PUFA), particularly omega-3. Therefore, there have been efforts to enhance food fatty acid profiles, helping them to meet human nutritional recommendations. Ruminant meat is the major dietary conjugated linoleic acid (CLA) source, but it also contains SFA at relatively high proportions, deriving from ruminal biohydrogenation of PUFA. Additionally, lipid metabolism in ruminants may differ from other species. Recent research has aimed to modify the fatty acid profile of meat, and other animal products. This review summarizes dietary strategies based on the n-3 PUFA supplementation of ruminant diets and their effects on meat fatty acid composition. Additionally, the role of n-3 PUFA in adipose tissue (AT) development and in the expression of key genes involved in adipogenesis and lipid metabolism is discussed. It has been demonstrated that linseed supplementation leads to an increase in α-linolenic acid (ALA) and eicosapentaenoic acid (EPA), but not in docosahexaenoic acid (DHA), whilst fish oil and algae increase DHA content. Dietary PUFA can alter AT adiposity and modulate lipid metabolism genes expression, although further research is required to clarify the underlying mechanism.

The Reformulation of a Beef Patty Enriched with n-3 Fatty Acids and Vitamin D3 Influences Consumers' Response under Different Information Scenarios.

The objective of this study was to investigate the sensory acceptability and willingness to pay (WTP) for a beef patty elaborated with beef from a local breed that was enriched with nutritional ingredients (vegetable oil mixture and vitamin D3). The experiment was conducted under two information scenarios (blind; full: ingredients used to enrich the patties in n-3 PUFA and vitamin D3). An in-home use test was carried out by 180 consumers to study consumer liking of two low-fat beef patties (C: conventional, M: modified). There were no differences in color and odor for the raw patties (p > 0.05). The sensory parameters of the cooked patties were assessed as being similar (p > 0.05) regardless of the information scenario. The sensory parameters remained crucial criteria for product acceptance and repeat purchase. Consumers positively evaluated the M patty. The information provided to consumers on the composition of the product influenced the response of consumers. It was also observed that the higher the education level of the consumer, the higher their scores for M beef patties in the blind scenario. It is thus necessary to implement appropriate marketing strategies in order to highlight the nutritional properties of the modified patties, making them competitive ahead of conventional patties.

Effects of Addition of Linseed and Marine Algae to the Diet on Adipose Tissue Development, Fatty Acid Profile, Lipogenic Gene Expression, and Meat Quality in Lambs.

This study examined the effect of linseed and algae on growth and carcass parameters, adipocyte cellularity, fatty acid profile and meat quality and gene expression in subcutaneous and intramuscular adipose tissues (AT) in lambs. After weaning, 33 lambs were fed three diets up to 26.7 ± 0.3 kg: Control diet (barley and soybean); L diet (barley, soybean and 10% linseed) and L-A diet (barley, soybean, 5% linseed and 3.89% algae). Lambs fed L-A diet showed lower average daily gain and greater slaughter age compared to Control and L (P < 0.001). Carcass traits were not affected by L and L-A diets, but a trend towards greater adipocyte diameter was observed in L and L-A in the subcutaneous AT (P = 0.057). Adding either linseed or linseed and algae increased α-linolenic acid and eicosapentaenoic acid contents in both AT (P < 0.001); however, docosahexaenoic acid was increased by L-A (P < 0.001). The n-6/n-3 ratio decreased in L and L-A (P < 0.001). Algae had adverse effects on meat quality, with greater lipid oxidation and reduced ratings for odor and flavor. The expression of lipogenic genes was downregulated in the subcutaneous AT (P < 0.05): acetyl-CoA carboxylase 1 (ACACA) in L and L-A and lipoprotein lipase (LPL) and stearoyl-CoA desaturase (SCD) in L-A. Fatty acid desaturase 1 (FADS1), fatty acid desaturase 2 (FADS2) and fatty acid elongase 5 (ELOVL5) were unaffected. In the subcutaneous AT, supplementing either L or L-A increased peroxisome proliferator-activated receptor gamma (PPARG) and CAAT-enhancer binding protein alpha (CEBPA) (P < 0.05), although it had no effect on sterol regulatory element-binding factor 1 (SREBF1). In the intramuscular AT, expression of ACACA, SCD, FADS1 and FADS2 decreased in L and L-A (P < 0.001) and LPL in L (P < 0.01), but PPARG, CEBPA and SREBF1 were unaffected.

Low-fat beef patties with augmented omega-3 fatty acid and CLA levels and influence of grape seed extract.

The effects of raising the omega-3 fatty acid (FA), conjugated linoleic acid (CLA), or omega-3 FA plus CLA levels on beef by means of dietary supplementation and of adding grape seed extract (250 mg/kg meat product) in beef patties stored at 2 ± 1 °C in aerobic packaging under simulated retail display conditions for 6 d was evaluated by measuring the thiobarbituric acid reactive substances (TBARS), pH, and instrumental color measurement values and by means of sensory analysis. The pH, instrumental color measurements, and sensory attribute values for patties made from beef with augmented omega-3 FA and/or CLA contents were similar to the values for the control patties made from beef from animals fed a conventional diet. Adding GSE lowered oxidation levels on day 6 (P < 0.001) and did not affect the instrumental color or sensory analysis results during the display period. This suggests that omega-3 FA and CLA-augmented beef could be used to make low-fat beef patties having characteristics similar to those of conventional beef patties while being more in keeping with currently recommended nutritional guidelines.