Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
J Chromatogr A ; 1190(1-2): 57-62, 2008 May 09.
Article in English | MEDLINE | ID: mdl-18378251

ABSTRACT

The scaling up of the separation of two proteins with an aqueous two-phase system (ATPS) from 176 mg with a 500 ml laboratory scale centrifugal partition chromatography (CPC) column to 2.2g with a 6.25 litre pilot-scale column is presented. A model sample system of a mixture of lysozyme and myoglobin was chosen for this study using an ATPS system comprising 12.5% (w/w) PEG-1000:12.5% (w/w) K2HPO4. It was found that the maximum sample concentration possible without precipitation was 2.2mg/ml for each constituent. The optimisation of rotor speed, mobile phase flow rate and sample loading was performed on a laboratory-scale device. It was found that a centrifuge speed of 2000 rpm (224 'g'), 10 ml/min mobile phase flow rate with a 43 ml (10% of active column volume) sample volume gave optimum operating conditions. This was linearly scaled up to pilot scale by increasing mobile phase flow rate, fraction size and sample loading in the ratio of the system capacities (i.e. 12.5:1). Flow rate was therefore increased from 10 ml/min to 125 ml/min, fraction size from 10 ml to 125 ml and sample loading from 43 ml to 500 ml. Rotor speed however was reduced from 2000 rpm on the laboratory device to 1293 rpm on the pilot-scale device to maintain the same 224 'g' field in each chamber, as the pilot-scale CPC unit has a larger rotor radius than the laboratory one. Resolution increased from Rs=1.28 on the 500 ml rotor to Rs=1.88 on the 6.25 litre rotor, giving potential throughputs in batch mode of over 40 g/day.


Subject(s)
Chromatography/methods , Muramidase/isolation & purification , Myoglobin/isolation & purification , Calibration , Centrifugation
2.
J Chromatogr A ; 918(1): 47-57, 2001 May 18.
Article in English | MEDLINE | ID: mdl-11403455

ABSTRACT

Centrifugal partition chromatography in the ion-exchange displacement mode allowed a preparative and efficient fractionation of low-molecular-mass heparins from enoxaparin sodium. Amberlite LA2--a lipophilic liquid secondary amine--was chosen as a weak anion exchanger. The biphasic system methyl isobutyl ketone-water was selected. Protonated LA2 (10%, v/v) was added to the organic stationary phase. Hydroxide (Na+, OH-) was chosen as a displacer in the aqueous mobile phase. The observed pH and concentration profiles are typical of displacement chromatography, as supported by numerical simulation. The Dubois test for the analysis of sugar content and an analysis of sulfur content (and consequently sulfatation rate) were carried out to monitor the effectiveness of the procedure. Moreover, the fractions were analyzed by high-performance size-exclusion chromatography and the 1H NMR spectra confirmed the fractionation of the sample of enoxaparin sodium.


Subject(s)
Chromatography, Ion Exchange/methods , Heparin, Low-Molecular-Weight/isolation & purification , Chromatography, Gel/methods , Chromatography, High Pressure Liquid/methods , Hydrogen-Ion Concentration , Magnetic Resonance Spectroscopy , Molecular Weight
SELECTION OF CITATIONS
SEARCH DETAIL
...