Hybrid bio-nanoporous peptide loaded-polymer platforms with anticancer and antibacterial activities.

In this study, hybrid bio-nanoporous peptides loaded onto poly(N-isopropylacrylamide-co-butylacrylate) (pNIPAM-co-BA) coatings were designed and obtained via matrix-assisted pulsed laser evaporation (MAPLE) technique. The incorporation of cationic peptides magainin (MG) and melittin (Mel) and their combination was tailored to target synergistic anticancer and antibacterial activities with low toxicity on normal mammalian cells. Atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy as well as contact angle and surface energy measurements revealed the successful and functional incorporation of both the peptides within porous polymeric nanolayers as well as surface modifications (i.e. variation in the pore size diameter, surface roughness, and wettability) after Mel, MG or Mel-MG incorporation compared to pNIPAM-co-BA. In vitro testing revealed the impairment of biofilm formation on all the hybrid coatings while testing with S. aureus, E. coli and P. aeruginosa. Moreover, MG was shown to modulate the effect of Mel in the combined Mel-MG extract formulation released via pNIPAM-platforms, thus significantly reducing cancer cell proliferation through apoptosis/necrosis as revealed by flow cytometry analysis performed in vitro on HEK293T, A375, B16F1 and B16F10 cells. To the best of our knowledge, Mel-MG combination entrapped in the pNIPAM-co-BA copolymer has not yet been reported as a new promising candidate with anticancer and antibacterial properties for improved utility in the biomedical field. Mel-MG incorporation compared to pNIPAM-co-BA in in vitro testing revealed the impairment of biofilm formation in all the hybrid formulations.

Antibacterial Activity of PVA Hydrogels Embedding Oxide Nanostructures Sensitized by Noble Metals and Ruthenium Dye.

Nanostructured oxides (SiO2, TiO2) were synthesized using the sol-gel method and modified with noble metal nanoparticles (Pt, Au) and ruthenium dye to enhance light harvesting and promote the photogeneration of reactive oxygen species, namely singlet oxygen (1O2) and hydroxyl radical (•OH). The resulting nanostructures were embedded in a transparent polyvinyl alcohol (PVA) hydrogel. Morphological and structural characterization of the bare and modified oxides was performed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), UV-Vis spectroscopy, and X-ray photoelectron spectroscopy (XPS). Additionally, electrokinetic potential measurements were conducted. Crystallinity data and elemental analysis of the investigated systems were obtained through X-ray diffraction and X-ray fluorescence analyses, while the chemical state of the elements was determined using XPS. The engineered materials, both as simple powders and embedded in the hydrogel, were evaluated for their ability to generate reactive oxygen species (ROS) under visible and simulated solar light irradiation to establish a correlation with their antibacterial activity against Staphylococcus aureus. The generation of singlet oxygen (1O2) by the samples under visible light exposure can be of significant importance for their potential use in biomedical applications.

Boletus edulis Extract-A New Modulator of Dysbiotic Microbiota.

The regular administration of antibiotics is a public concern due to the prejudices of large population groups and the high frequency with which antimicrobial products are prescribed. The current study aimed to evaluate the in vitro effect of a new extract from Boletus edulis (BEE) on the human microbiota. One of the disadvantages of this extensive use is the disruption of the human microbiota, leading to potential negative health consequences. The in vitro evaluation of BEE consisted in determining its cytotoxicity, influence on the concentration of four types of cytokines (IL-6, IL-10, IL-1ß, TNFα), and capacity to modulate the human microbiota after administering antibiotics. The latter was assessed by microbiome analysis and the evaluation of short-chain fatty acid synthesis (SCFAs). Simultaneously, the content of total polyphenols, the antioxidant capacity, and the compositional analysis of the extract (individual polyphenols composition) were determined. The results showed that BEE modulates the microbial pattern and reduces inflammatory progression. The data demonstrated antioxidant properties correlated with the increase in synthesizing some biomarkers, such as SCFAs, which mitigated antibiotic-induced dysbiosis without using probiotic products.

Bioactive Coatings Based on Nanostructured TiO2 Modified with Noble Metal Nanoparticles and Lysozyme for Ti Dental Implants.

This work presents the synthesis of nanostructured TiO2 modified with noble metal nanoparticles (Au, Ag) and lysozyme and coated on titanium foil. Moreover, the specific structural and functional properties of the resulting inorganic and hybrid materials were explored. The purpose of this study was to identify the key parameters for developing engineered coatings on titanium foil appropriate for efficient dental implants with intrinsic antibacterial activity. TiO2 nanoparticles obtained using the sol-gel method were deposited on Ti foil and modified with Au/Ag nanoparticles. Morphological and structural investigations (scanning electron and atomic force microscopies, X-ray diffraction, photoluminescence, and UV-Vis spectroscopies) were carried out for the characterization of the resulting inorganic coatings. In order to modify their antibacterial activity, which is essential for safe dental implants, the following aspects were investigated: (a) singlet oxygen (1O2) generation by inorganic coatings exposed to visible light irradiation; (b) the antibacterial behavior emphasized by titania-based coatings deposited on titanium foil (TiO2/Ti foil; Au-TiO2/Ti foil, Ag-TiO2/Ti foil); (c) the lysozyme bioactivity on the microbial substrate (Micrococcus lysodeicticus) after its adsorption on inorganic surfaces (Lys/TiO2/Ti foil; Lys/Au-TiO2/Ti foil, Lys/Ag-TiO2/Ti foil); (d) the enzymatic activity of the above-mentioned hybrids materials for the hydrolysis reaction of a synthetic organic substrate usually used for monitoring the lysozyme biocatalytic activity, namely, 4-Methylumbelliferyl ß-D-N,N',N″-triacetylchitotrioside [4-MU-ß- (GlcNAc)3]. This was evaluated by identifying the presence of a fluorescent reaction product, 7-hydroxy-4-metyl coumarin (4-methylumbelliferone).

Probiotic Strains Influence on Infant Microbiota in the In Vitro Colonic Fermentation Model GIS1.

The main goal of our study was to evaluate the effect of the individual administration of five lyophilized lactic acid bacteria strains (Lactobacillus fermentum 428ST, Lactobacillus rhamnosus E4.2, Lactobacillus plantarum FCA3, Lactobacillus sp. 34.1, Weissella paramesenteroides FT1a) against the in vitro simulated microbiota of the human colon using the GIS1 system. The influence on the metabolic activity was also assessed by quantitative determination of proteins and polysaccharides at each segment of human colon. The obtained results indicated that the lactic acid bacteria L. rhamnosus E4.2 and W. paramesenteroides FTa1 had better efficiency in synthesising exopolysaccharides and also a better probiotic potential and therefore could be recommended for use in probiotics products or food industry.

Preliminary identification and classification of five new yeast strains isolated from oil-polluted environment.

Bioremediation is a very interesting alternative for restoring the oil-polluted ecosystems. Many studies concerning the possibility of using microorganisms (bacteria and yeasts) in the degradation of oil compounds have as starting point the isolation and taxonomical identification of new species and strains with degradative abilities. Our study focusses on the preliminary classification of five yeast strains (D1, D2, D3, D4 and D6) isolated from oil-polluted environments. The strains were characterized by conventional taxonomical techniques: microscopical and macroscopical appearance, fermentation abilities, assimilation of various carbon or nitrogen compounds, growth under stress conditions (non-permissive temperatures, high glucose concentration) and urea degradation. According to these tests, D1, D2 and D4 showed great similarity to Rhodotorula glutinis, D3 to Candida parapsilosis and D6 to Candida tropicalis. Further supplementary tests were performed in order to establish their ability to degrade hydrocarbons, by observing growth in media with n-alkanes (n-decane, n-dodecane, n-tetradecane, n-hexadecane). Thus, D1, D2 and D4 were the best alkane-consuming strains, presenting possible similar degrading abilities and pathways, which correlates well to our identification as Rhodotorula strains. For D3 and D6 the growth was not so spectacular as for D1, D2 and D4, but continuous along the entire experiment. The resemblance between the curves profiles confirms the idea that both belong to the same genus, Candida.

[Molecular taxonomy techniques used for yeast identification]. / Tehnici de taxonomie moleculara utilizate în identificarea drojdiilor.

Due to the major impact of yeasts in human life based on the existence of pathogen yeast species and of species with biotechnological abilities, in the last few years new molecular techniques are performed for an accurate identification of natural isolates. Our study is aimed to review some of these techniques such as electrokariotyping by PFGE (Pulsed Field Gel Electrophoresis), estimation of the molar percentage of guanine and cytosine, the applications of PCR reaction in yeast identification using RAPD (Random amplified polymorphic DNA), UP-PCR (Universally Primed Polymerase Chain Reaction), MLST (Multilocus sequence typing) techniques, mtDNA and rDNA homology studies. Such molecular techniques complete the phenotypical characterization based on classical taxonomical tests allowing thus the polyphasic identification of the microorganisms.