Composition Dictates Octahedral Tilt and Photostability in Halide Perovskites.

Halide perovskites are excellent candidate materials for use in solar cell, LED, and detector devices, in part because their composition can be tuned to achieve ideal optoelectronic properties. Empirical efficiency optimization has led the field toward compositions rich in FA (formamidinium) on the A-site and I on the X-site, with additional small amounts of MA (methylammonium) or Cs A-site cations and Br X-site anions. However, it is not clear how and why the specific compositions of alloyed, that is, mixed component, halide perovskites relate to photo-stability of the materials. Here, this work combines synchrotron grazing incidence wide-angle X-ray scattering, photoluminescence, high-resolution scanning electron diffraction measurements and theoretical modelling to reveal the links between material structure and photostability. Namely, this work finds that increased octahedral titling leads to improved photo-stability that is correlated with lower densities of performance-harming hexagonal polytype impurities. These results uncover the structural signatures underpinning photo-stability and can therefore be used to make targeted changes to halide perovskites, bettering the commercial prospects of technologies based on these materials.

Perioperative outcomes of utilizing infrahepatic inferior vena cava clamping and Pringle maneuver during hepatectomy: a meta-analysis.

PURPOSE: Intraoperative bleeding during hepatectomy is primarily controlled through anaesthesiological interventions or surgical techniques such as Pringle maneuver (PM). Infrahepatic IVC clamping (IIVCC) is an alternative surgical technique to reduce central venous pressure and prevent retrograde hepatic venous bleeding. The aim of the meta-analysis was to compare IIVCC+PM with PM alone in terms of intraoperative outcomes and perioperative complications. METHODS: Medline, Cochrane Library, Scopus, Web of Science, and EMBASE were searched for comparative studies till 16.04.2024, resulting in 679 articles, of which eight studies met inclusion criteria. Data on patient demographics, surgical technique, and perioperative outcomes was assessed. Cochrane Risk of Bias 2.0 (RoB 2.0) Tool and Newcastle-Ottawa Scale (NOS) were used for risk of bias assessment. RESULTS: Two randomized controlled trials, one prospective, and five retrospective cohort studies with 358 patients in IIVCC+PM and 397 patients in PM alone group were included. IIVCC+PM resulted in significantly greater CVP reduction, less intraoperative blood loss (MD (95% CI) = - 233.03 (- 360.48 to - 105.58), P < 0.001), and less intraoperative blood transfusion (OR (95% CI) = 0.38 (0.25 to 0.57), P < 0.001) compared to PM alone. The two groups had comparable total operative time, transection time and total intraoperative fluid infusion. Patients undergoing IIVCC+PM had significantly shorter length of stay (MD (95% CI) = - 0.63 days (- 1.21 to - 0.05 days), P = 0.03) and overall complication rates (OR (95% CI) = 0.63 (0.43-0.92), P = 0.02) compared to PM alone group. CONCLUSION: The utilization of IIVCC along with PM during liver resection may be beneficial in reducing intraoperative bleeding and blood transfusion without adversely influencing operative times or perioperative outcomes compared to PM alone.

Imaging Light-Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping.

In recent years, halide perovskite materials have been used to make high-performance solar cells and light-emitting devices. However, material defects still limit device performance and stability. Here, synchrotron-based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr3 (MA = CH3 NH3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light-induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X-ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.

Irrigation with Bupivacaine at the Surgical Bed for Postoperative Shoulder Tip and Abdominal Pain Relief after Laparoscopic Cholecystectomy.

Gallstones in western countries are primarily composed of cholesterol. However, mixed or pigment stones, which contain a higher proportion of bilirubin, are more frequently seen in developing nations and Asia than in western countries. Abdominal and shoulder tip pains (STPs) are common complaints following the standard laparoscopic cholecystectomy procedure. To date, all pain management modalities have proven variable outcomes. This prospective randomized study included 82 patients who underwent elective laparoscopic cholecystectomy. The control group received 20 mL of normal saline, whereas the study group received a 20-mL instillation of 0.5% bupivacaine at the gallbladder bed after surgical resection. The Visual Analog Scale (VAS) was used to analyze abdominal pain and STP. The mean age ranged from 20 to 80 years. Abdominal VAS at 6, 12, 18, 24, 30, 36, and 48 hours were statistically insignificant. The majority were discharged on postoperative day 1 (32 studies, 37 control). Follow-up VAS after 1 week for STP VAS and abdominal pain VAS in both groups were statistically insignificant. Even with small numbers of a well-conducted randomized trial, we demonstrated that bupivacaine irrigation at the gallbladder bedpost laparoscopic cholecystectomy does not affect pain relief.

Local nanoscale phase impurities are degradation sites in halide perovskites.

Understanding the nanoscopic chemical and structural changes that drive instabilities in emerging energy materials is essential for mitigating device degradation. The power conversion efficiency of halide perovskite photovoltaic devices has reached 25.7 per cent in single-junction and 29.8 per cent in tandem perovskite/silicon cells1,2, yet retaining such performance under continuous operation has remained elusive3. Here we develop a multimodal microscopy toolkit to reveal that in leading formamidinium-rich perovskite absorbers, nanoscale phase impurities, including hexagonal polytype and lead iodide inclusions, are not only traps for photoexcited carriers, which themselves reduce performance4,5, but also, through the same trapping process, are sites at which photochemical degradation of the absorber layer is seeded. We visualize illumination-induced structural changes at phase impurities associated with trap clusters, revealing that even trace amounts of these phases, otherwise undetected with bulk measurements, compromise device longevity. The type and distribution of these unwanted phase inclusions depends on the film composition and processing, with the presence of polytypes being most detrimental for film photo-stability. Importantly, we reveal that both performance losses and intrinsic degradation processes can be mitigated by modulating these defective phase impurities, and demonstrate that this requires careful tuning of local structural and chemical properties. This multimodal workflow to correlate the nanoscopic landscape of beam-sensitive energy materials will be applicable to a wide range of semiconductors for which a local picture of performance and operational stability has yet to be established.

Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases.

Efforts to stabilize photoactive formamidinium (FA)­based halide perovskites for perovskite photovoltaics have focused on the growth of cubic formamidinium lead iodide (α-FAPbI3) phases by empirically alloying with cesium, methylammonium (MA) cations, or both. We show that such stabilized FA-rich perovskites are noncubic and exhibit ~2° octahedral tilting at room temperature. This tilting, resolvable only with the use of local nanostructure characterization techniques, imparts phase stability by frustrating transitions from photoactive to hexagonal phases. Although the bulk phase appears stable when examined macroscopically, heterogeneous cation distributions allow microscopically unstable regions to form; we found that these transitioned to hexagonal polytypes, leading to local trap-assisted performance losses and photoinstabilities. Using surface-bound ethylenediaminetetraacetic acid, we engineered an octahedral tilt into pure α-FAPbI3 thin films without any cation alloying. The templated photoactive FAPbI3 film was extremely stable against thermal, environmental, and light stressors.

Strain analysis and engineering in halide perovskite photovoltaics.

Halide perovskites are a compelling candidate for the next generation of clean-energy-harvesting technologies owing to their low cost, facile fabrication and outstanding semiconductor properties. However, photovoltaic device efficiencies are still below practical limits and long-term stability challenges hinder their practical application. Current evidence suggests that strain in halide perovskites is a key factor in dictating device efficiency and stability. Here we outline the fundamentals of strain within halide perovskites relevant to photovoltaic applications and rationalize approaches to characterize the phenomenon. We examine recent breakthroughs in eliminating the adverse impacts of strain, enhancing both device efficiencies and operational stabilities. Finally, we discuss further challenges and outline future research directions for placing stress and strain studies at the forefront of halide perovskite research. An extensive understanding of strain in halide perovskites is needed, which would allow effective strain management and drive further enhancements in efficiencies and stabilities of perovskite photovoltaics.

Strain-gradient mediated local conduction in strained bismuth ferrite films.

It has been recently shown that the strain gradient is able to separate the light-excited electron-hole pairs in semiconductors, but how it affects the photoelectric properties of the photo-active materials remains an open question. Here, we demonstrate the critical role of the strain gradient in mediating local photoelectric properties in the strained BiFeO3 thin films by systematically characterizing the local conduction with nanometre lateral resolution in both dark and illuminated conditions. Due to the giant strain gradient manifested at the morphotropic phase boundaries, the associated flexo-photovoltaic effect induces on one side an enhanced photoconduction in the R-phase, and on the other side a negative photoconductivity in the morphotropic [Formula: see text]-phase. This work offers insight and implication of the strain gradient on the electronic properties in both optoelectronic and photovoltaic devices.