Investigation of tribo-mechanical performance of alkali treated rice-husk and polypropylene-random-copolymer based biocomposites.

This study was based on the experimental performance evaluation of a wood polymer composite (WPC) that was synthesized by incorporating untreated and treated rice husk (RH) fibers into a polypropylene random copolymer matrix. The submicron-scale RH fibers were alkali-treated to modify the surface and introduce new functional groups in the WPC. A compatibilizer (maleic anhydride) and a thermos-mechanical properties modifier (polypropylene grafted with 30 % glass fiber) were used in the WPC. The effects of untreated and treated RH on the WPC panels were studied using FESEM, FTIR, and microscope images. A pin-on-disk setup was used to investigate the bulk tribological properties of PPRC and WPC. The complex relationship between the friction coefficient of different loading of RH fibers in the WPC, as a function of sliding distance, was analyzed along with the temperature and morphology of the surface. It was observed that untreated RH acted as a friction modifier, while treated RH acted as a solid lubricant. Microhardness was calculated using the QCSM module on nanoindentation. It was found that untreated RH led to an increase in microhardness, while treated RH caused a decrease in hardness compared to PPRC.

Nanosecond Laser Induced Surface Structuring of Cadmium after Ablation in Air and Propanol Ambient.

In the present study KrF Excimer laser has been employed to irradiate the Cadmium (Cd) targets for various number of laser pulses of 500, 1000, 1500 and 2000, at constant fluence of 3.6 J cm-2. Scanning Electron Microscopy (SEM) analysis was utilized to reveal the formation of laser induced nano/micro structures on the irradiated target (Cd) surfaces. SEM results show the generation of cavities, cracks, micro/nano wires/rods, wrinkles along with re-deposited particles during irradiation in air, whereas subsurface boiling, pores, cavities and Laser Induced Periodic Surface Structures (LIPSS) on the inner walls of cavities are revealed at the central ablated area after irradiation in propanol. The ablated volume and depth of ablated region on irradiated Cd targets are evaluated for various number of pulses and is higher in air as compared to propanol ambient. Fast Fourier Transform Infrared spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD) analyses show the presence of oxides and hydro-oxides of Cd after irradiation in propanol, whereas the existence of oxides is observed after irradiation in air ambient. Nano-hardness tester was used to investigate mechanical modifications of ablated Cd. It reveals an increase in hardness after irradiation which is more pronounced in propanol as compared to air.

Environmental remediation through various composite membranes moieties: Performances and thermomechanical properties.

Pollution harms ecosystems and poses a serious threat to human health around the world through direct or indirect effects on air, water, and land. The importance of remediating effluents is paramount to reducing environmental concerns. CO2 emissions are removed efficiently and efficaciously with mixed matrix membranes (MMMs), which are viable replacements for less efficient and costly membranes. In the field of membrane technology, MMMs are advancing rapidly due to their good separation properties. The selection of filler to be incorporated in mixed matrix membranes is very considered very important. There has been considerable interest in MOFs, carbon nanotubes (CNTs), ionic liquids (ILs), carbon molecular sieves (CMSs), sulfonated fillers (SFs), and layered silicates (LSs) as inorganic fillers for improving the properties of mixed matrix membranes. These fillers promise superb results and long durability for mixed matrix membranes based on them. The purpose of this review is to review different fillers used in MMMs for improving separation properties, limitations, and thermomechanical properties for environmental control and remediation.

Current status and future perspectives of proton exchange membranes for hydrogen fuel cells.

The world is on the lookout for sustainable and environmentally benign energy generating systems. Fuel cells (FCs) are regarded as environmentally friendly technology since they address a variety of environmental issues, such as hazardous levels of local pollutants, while also delivering economic advantages owing to their high efficiency. A fuel cell is a device that changes chemical energy contained in fuels (such as hydrogen and methanol) into electrical energy. A wide variety of FCs are commercially available; however, proton exchange membranes for hydrogen fuel cells (PEMFCs) have received overwhelming attention owing to their potential to significantly reduce our energy consumption, pollution emissions, and reliance on fossil fuels. The proton exchange membrane (PEM) is a critical element; it is made of semipermeable polymer and serves as a barrier between the cathode and anode during fuel cell construction. Additionally, membranes function as an insulator between the cathode and anode, facilitating proton exchange and inhibiting electron exchange between the electrodes. Due to the excellent features such as durability and proton conductivity, Nafion membranes are commercially viable and have been in use for a long time. However, Nafion membranes are costly, and their proton exchange capacities degrade over time at higher temperatures and low relative humidity. Other types of membranes have been considered in addition to Nafion membranes. This article discusses the problems connected with several types of PEMs, as well as the strategies adopted to improve their characteristics and performance.

Functionalized organic filler based integrated membranes for environmental remediation.

Mixed matrix membranes (MMMs) are synthesized for efficient CO2 separation released from various anthropogenic sources, which are due to global environmental concerns. The synergetic effect of porous nitrogen-rich, CO2-philic filler and polymer in mixed matrix-based membranes (MMMs) can separate CO2 competent. The development of various loadings of porphyrin poly(N-isopropyl Acryl Amide) (P-NIPAM)as functionalized organic fillers (5-20%) in polysulfone (PSU) through solution casting is carried out followed by the various characterizations including field emission scanning electron microscopy (FESEM), X-ray diffraction analysis (XRD), Fourier Transform Infrared Spectrometer(FT-IR) analysis and pure and mixed gas permeations ranging from 2 to 10 bar feed pressure. Due to both organic species interactions in the matrix, well-distributed fillers and homogenous surfaces, and cross-sectional structures were observed due to π-π interactions and Lewis's basic functionalities. The strong affinity of porous nitrogen-rich and CO2-philic fillers through gas permeation analysis showed high CO2/CH4 and CO2/N2 gas performance that surpassed Robeson's upper bound limit. Comparatively, MMMs showed improved CO2/CH4 permeabilities from 87.5 ± 0.5 Barrer to 88.2 ± 0.9 Barrer than pure polymer matrix. For CO2/N2, CO2 permeabilities improved to 75 ± 0.8 Barrer than pure polymer matrix. For both gas pairs (CO2/CH4, CO2/N2), respective pureselectivities (84%; 86%) and binary selectivities (85% and 85%)were improved. Various theoretical gas permeation models were used to predict CO2 permeabilities for MMMs from which the modified Maxwell-Wagner-Sillar model showed the least AARE% of 0.87. The results showed promising results for efficient CO2 separation due to exceptional functionalized P-PNIPAM affinitive properties. Finally, cost analysis reflected the inflated cost of membranes production for industrial setup using indigenous resources.

Polymer based nanocomposites: A strategic tool for detection of toxic pollutants in environmental matrices.

A large fraction of population is suffering from waterborne diseases due to the contaminated drinking water. Both anthropogenic and natural sources are responsible for water contamination. Revolution in industrial and agriculture sectors along with a huge increase in human population has brought more amount of wastes like heavy metals, pesticides and antibiotics. These toxins are very harmful for human health, therefore, it is necessary to sense their presence in environment. Conventional strategies face various problems in detection and quantification of these pollutants such as expensive equipment and requirement of high maintenance with limited portability. Recently, nanostructured devices have been developed to detect environmental pollutants. Polymeric nanocomposites have been found robust, cost effective, highly efficient and accurate for sensing various environmental pollutants and this is due to their porous framework, multi-functionalities, redox properties, great conductivity, catalytic features, facile operation at room temperature and large surface area. Synergistic effects between polymeric matrix and nanomaterials are responsible for improved sensing features and environmental adaptability. This review focuses on the recent advancement in polymeric nanocomposites for sensing heavy metals, pesticides and antibiotics. The advantages, disadvantages, operating conditions and future perspectives of polymeric nanocomposites for sensing toxic pollutants have also been discussed.

Experimental Study of Mechanical Properties of Polypropylene Random Copolymer and Rice-Husk-Based Biocomposite by Using Nanoindentation.

Nanoindentation is widely used to investigate the surface-mechanical properties of biocomposites. In this study, polypropylene random copolymer (PPRC) and biowaste rice husk (BRH) were used as the main raw materials, and glass-fiber-reinforced polypropylene and talc were also used with BRH to enhance the mechanical characterization of the biocomposites. The interfacial bonding between the polymer and the rice husk was increased by treating them with maleic anhydride and NaOH, respectively. The results obtained from the nanoindentation indicated that the plastic behavior of the biocomposites was prominent when untreated BRH was used and vice versa. The modulus and hardness of the biocomposite improved by 44.8% and 54.8% due to the neat PPRC, respectively. The tribological properties were studied based on the hardness-to-modulus ratio and it was found that BRH- and talc-based biocomposites were better than other samples in terms of low friction and wear rate. The creep measurements showed that untreated rice husk biocomposite exhibited high resistance to load deformation.

Development of an extended model for the permeation of environmentally hazardous CO2 gas across asymmetric hollow fiber composite membranes.

This study presents an extended thermodynamic and phenomenological combined model to mitigate the environmental hazardous acid gas over composite membranes. The model has been applied to an acid gas such as carbon dioxide (CO2) for its permeation through polyetherimide incorporated montmorillonite (Mt) nanoparticles hollow fiber asymmetric composite membranes. The well-established non-equilibrium lattice fluid (NELF) model for penetrating low molecular weight penetrant in a glassy polyetherimide (PEI) was extended to incorporate the other important polymer/filler system features such as tortuosity in acid gas diffusion pathways resulted from layered filler aspect ratio and concentration. The model mentioned above predicts the behavior of acid gas in PEI-Mt composite membranes based on thermodynamic characteristics of CO2 and PEI and tortuosity due to Mt. The calculated results are compared to experimentally determined values of CO2 permeability through PEI-Mt composite asymmetric hollow fiber membranes at varying transmembrane pressures and Mt concentrations. A reasonable agreement was found between the model predicted behavior and experimentally determined data in terms of CO2 solubility, Mt concentration and aspect ratio were calculated based on average absolute relative error (%AARE). The proposed modified model efficiently predicts the CO2 permeance across MMMs up to 3 wt% Mt loadings and 6 bar pressure with ± 10%AARE.

Glycerol Assisted Pretreatment of Lignocellulose Wheat Straw Materials as a Promising Approach for Fabrication of Sustainable Fibrous Filler for Biocomposites.

Glycerol pretreatment is a promising method for the environmentally-friendly transformation of lignocellulosic materials into sustainable cellulose-rich raw materials (i.e., biopolymer) to fabricate biocomposites. Here, a comparison of aqueous acidified glycerol (AAG) pretreatment of wheat straw (WS) with alkaline, hot water, and dilute acid pretreatments on the thermal and mechanical characteristics of their fabricated composite board is presented. A comparison of total energy expenditure during WS pretreatment with AAG and other solutions was estimated and a comparative influence of AAG processing on lignocellulosic constituents and thermal stability of WS fiber was studied. Results imply that AAG pretreatment was superior in generating cellulose-rich fiber (CRF) as compared to other pretreatments and enhanced the cellulose contents by 90% compared to raw WS fiber. Flexural strength of acidic (40.50 MPa) and hot water treated WS composite (38.71 MPa) was higher compared to the value of 33.57 MPa for untreated composite, but AAG-treated composites exhibited lower values of flexural strength (22.22 MPa) compared to untreated composite samples. Conversely, AAG pretreatment consumed about 56% lesser energy for each kg of WS processed as compared to other pretreatments. These findings recognize that glycerol pretreatment could be a clean and new pretreatment strategy to convert agricultural waste into high-quality CRF as a sustainable raw material source for engineered biocomposite panels.

Study of Nano-Mechanical Performance of Pretreated Natural Fiber in LDPE Composite for Packaging Applications.

In this work, the effects of chemical pretreatment and different fiber loadings on mechanical properties of the composites at the sub-micron scale were studied through nanoindentation. The composites were prepared by incorporating choline chloride (ChCl) pretreated rice husk waste (RHW) in low-density polyethylene (LDPE) using melt processing, followed by a thermal press technique. Nanoindentation experiments with quasi continuous stiffness mode (QCSM) were performed on the surface of produced composites with varying content of pretreated RHW (i.e., 10, 15, and 20 wt.%). Elastic modulus, hardness, and creep properties of fabricated composites were measured as a function of contact depth. The results confirmed the appreciable changes in hardness, elastic modulus, and creep rate of the composites. Compliance curves indicated that the composite having 20 wt.% of pretreated RHW loading was harder compared to that of the pure LDPE and other composite samples. The values of elastic modulus and hardness of the composite containing 20 wt.% pretreated RHW were increased by 4.1% and 24% as compared to that of the pure LDPE, respectively. The creep rate of 42.65 nm/s and change in depth of 650.42 nm were also noted for the composite with RHW loading of 20 wt.%, which showed the substantial effect of holding time at an applied peak load of 100 mN. We believe that the developed composite could be a promising biodegradable packaging material due to its good tribo-mechanical performance.

Nano-Indentation Response of Ultrahigh Molecular Weight Polyethylene (UHMWPE): A Detailed Analysis.

Nano-indentation, a depth sensing technique, is a useful and exciting tool to investigate the surface mechanical properties of a wide range of materials, particularly polymers. Knowledge of the influence of experimental conditions employed during nano-indentation on the resultant nano-mechanical response is very important for the successful design of engineering components with appropriate surface properties. In this work, nano-indentation experiments were carried out by selecting various values of frequency, amplitude, contact depth, strain rate, holding time, and peak load. The results showed a significant effect of amplitude, frequency, and strain rate on the hardness and modulus of the considered polymer, ultrahigh molecular weight polyethylene (UHMWPE). Load-displacement curves showed a shift towards the lower indentation depths along with an increase in peak load by increasing the indentation amplitude or strain rate. The results also revealed the strong dependence of hardness and modulus on the holding time. The experimental data of creep depth as a function of holding time was successfully fitted with a logarithmic creep model (R2 ≥ 0.98). In order to remove the creeping effect and the nose problem, recommended holding times were proposed for the investigated polymer as a function of different applied loads.

Enhancement of fuel characteristics of rice husk via torrefaction process.

Torrefaction, is a pretreatment process in the conversion of various biomass feedstocks into an efficient solid fuel. In the present research, rice husk was torrefied at 200°C, 250°C, and 300°C for 10, 30, 90, and 150 minutes under a non-oxidative environment. The energy yield and mass yield of torrefied solid residues ranged from 51.3% to 96.8%, and 49.1% to 95.1%, respectively, under torrefaction conditions. Increasing the residence time and temperature of thermal treatment causes a rise in carbon content from 32.45% to 48.5%, and raises the calorific value from 16.48 MJ/kg to 19.82 MJ/kg. The torrefaction process also reduced the swelling tendency of the biomass in water from its initial value of 308% to 92% only. Various other characterizations including Fourier transform infrared radiation, thermogravimetric analysis (TGA) and scanning electron microscopy were performed to analyze the structural and textural aspects of torrefied biomass. The TGA and derivative thermogravimetric analysis curves indicated that torrefaction affected the hemicellulose fraction of biomass significantly. The surface morphology of thermolyzed samples revealed the rupture of the surface induced by the torrefaction process. Overall, the torrefaction process has not only improved the fuel characteristics of the rice husk but also enhanced its hydrophobicity.

Key characteristics and modelling of bigels systems: A review.

Bigels are interesting semisolid formulations with better properties for different applications such as cosmetics and pharmaceutical systems. Due to the mixing of two phases of different nature (polar and apolar), bigels possess some interesting features like ability to deliver hydrophilic and hydrophobic drugs, better spreadability and water washability, improved permeability of drugs, enhanced hydration of stratum corneum and ability to manipulate the drug release rate. The main objective of this review article is to provide a thorough insight into the important characteristics of bigels together with the discussion on modelling of bigel systems to relate their properties with individual constituents and different parameters. Moreover, some important applications of bigels are also discussed by considering some examples from the literature.

Seroprevalence of human Toxoplasma gondii infection among pregnant women in Charsadda, KP, Pakistan.

Toxoplasmosis is a very common and asymptomatic infection caused by Toxoplasma gondii. Pregnant women can develop serious complications if the infection passes to the developing fetus. Primary infection in the pregnant women during the gestation period will result in the development of severe systemic disease with temporary parasitemia and will affect the developing fetus. Several clinical complications can be observed in the congenitally infected children which include mild disease to serious health defects such as mental retardation. The aim of the current study was to determine the seroprevalence among pregnant women in District Charsadda, KP, Pakistan. From various maternity homes and other health care centers 200 random samples were collected. Serum was extracted from the blood and was subjected to the specific serological technique by using Latex Agglutination Kit. Out of 200 random samples collected from pregnant women, 69 (34.5%) were detected positive for the parasite and the remaining 131 (65.5%) were found negative. The seroprevalence of the parasite was also determined in the pregnant women based on various age groups. The infection was more prevalent in the age group of 26-40 years with a total of 54.55% of the total studied population while low seroprevalence of the parasite was recorded in the age group 41-55 years with about 21.87%. However, the age group 15-25 years showed a moderate infection of about 23.63%. Abnormalities were also observed in the newborns of the pregnant women infected with the parasite. From Charsadda 76.1%, 45.1% from Tangi and 72.1% babies from tehsil Shabqadar were born with congenital abnormalities. With proper health care, development and utilization of effective diagnostic and therapeutic strategies the epidemics of the infection can be significantly reduced. The routine serological test is recommended for all the pregnant women.

Primary localized amyloidosis of urinary bladder: a case report and review of literature.

Amyloidosis is a disorder of protein metabolism characterized by extracellular deposition of abnormal protein fibrils. It may either be localized to any organ or systematically distributed throughout the body. The biochemical nature of proteins varies but the physical and tinctorial properties are shared by all the amyloidogenic proteins. In the West, it is mainly composed of amyloid light (AL) type immunoglobulin (Ig) light chains. Amyloidosis of the genitourinary tract is rare except for the kidney and isolated primary amyloidosis of the urinary bladder is even rarer. It mainly presents as intermittent painless gross hematuria. It mimics transitional cell carcinoma on imaging and endoscopic examination. We herein present a case of fifty six-years-old male with history of painless hematuria for three months. Cystoscopy revealed a 1 cm hyperemic area on the posterior wall of urinary bladder. The biopsy showed features of amyloidosis and amyloid A (AA) immunostaining was negative. Extensive workup was done to exclude other sites of involvement and a final diagnosis of primary localized amyloidosis of the urinary bladder was made. The patient is on regular follow-up.